kernel_optimize_test/drivers/acpi/Makefile
Rafael J. Wysocki 95c513ec84 ACPI: Add Time and Alarm Device (TAD) driver
Introduce a driver for the ACPI Time and Alarm Device (TAD) based on
Section 9.18 of ACPI 6.2.

This driver only supports the system wakeup capabilities of the TAD
which are mandatory.  Support for the RTC capabilities of the TAD
will be added to it in the future.

This driver is entirely sysfs-based.  It provides attributes (under
the TAD platform device) to allow user space to manage the AC and DC
wakeup timers of the TAD: set and read their values, set and check
their expire timer wake policies, check and clear their status and
check the capabilities of the TAD reported by AML.  The DC timer
attributes are only present if the TAD supports a separate DC alarm
timer.

The wakeup events handling and power management of the TAD is
expected to be taken care of by the ACPI PM domain attached to its
platform device.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2018-03-20 10:36:04 +01:00

120 lines
3.6 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0
#
# Makefile for the Linux ACPI interpreter
#
ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT
#
# ACPI Boot-Time Table Parsing
#
obj-$(CONFIG_ACPI) += tables.o
obj-$(CONFIG_X86) += blacklist.o
#
# ACPI Core Subsystem (Interpreter)
#
obj-$(CONFIG_ACPI) += acpi.o \
acpica/
# All the builtin files are in the "acpi." module_param namespace.
acpi-y += osi.o osl.o utils.o reboot.o
acpi-y += nvs.o
# Power management related files
acpi-y += wakeup.o
acpi-$(CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT) += sleep.o
acpi-y += device_sysfs.o device_pm.o
acpi-$(CONFIG_ACPI_SLEEP) += proc.o
#
# ACPI Bus and Device Drivers
#
acpi-y += bus.o glue.o
acpi-y += scan.o
acpi-y += resource.o
acpi-y += acpi_processor.o
acpi-y += processor_core.o
acpi-$(CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC) += processor_pdc.o
acpi-y += ec.o
acpi-$(CONFIG_ACPI_DOCK) += dock.o
acpi-y += pci_root.o pci_link.o pci_irq.o
obj-$(CONFIG_ACPI_MCFG) += pci_mcfg.o
acpi-y += acpi_lpss.o acpi_apd.o
acpi-y += acpi_platform.o
acpi-y += acpi_pnp.o
acpi-$(CONFIG_ARM_AMBA) += acpi_amba.o
acpi-y += power.o
acpi-y += event.o
acpi-$(CONFIG_ACPI_REDUCED_HARDWARE_ONLY) += evged.o
acpi-y += sysfs.o
acpi-y += property.o
acpi-$(CONFIG_X86) += acpi_cmos_rtc.o
acpi-$(CONFIG_X86) += x86/apple.o
acpi-$(CONFIG_X86) += x86/utils.o
acpi-$(CONFIG_DEBUG_FS) += debugfs.o
acpi-$(CONFIG_ACPI_NUMA) += numa.o
acpi-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o
acpi-y += acpi_lpat.o
acpi-$(CONFIG_ACPI_LPIT) += acpi_lpit.o
acpi-$(CONFIG_ACPI_GENERIC_GSI) += irq.o
acpi-$(CONFIG_ACPI_WATCHDOG) += acpi_watchdog.o
# These are (potentially) separate modules
# IPMI may be used by other drivers, so it has to initialise before them
obj-$(CONFIG_ACPI_IPMI) += acpi_ipmi.o
obj-$(CONFIG_ACPI_AC) += ac.o
obj-$(CONFIG_ACPI_BUTTON) += button.o
obj-$(CONFIG_ACPI_FAN) += fan.o
obj-$(CONFIG_ACPI_VIDEO) += video.o
obj-$(CONFIG_ACPI_TAD) += acpi_tad.o
obj-$(CONFIG_ACPI_PCI_SLOT) += pci_slot.o
obj-$(CONFIG_ACPI_PROCESSOR) += processor.o
obj-$(CONFIG_ACPI) += container.o
obj-$(CONFIG_ACPI_THERMAL) += thermal.o
obj-$(CONFIG_ACPI_NFIT) += nfit/
obj-$(CONFIG_ACPI) += acpi_memhotplug.o
obj-$(CONFIG_ACPI_HOTPLUG_IOAPIC) += ioapic.o
obj-$(CONFIG_ACPI_BATTERY) += battery.o
obj-$(CONFIG_ACPI_SBS) += sbshc.o
obj-$(CONFIG_ACPI_SBS) += sbs.o
obj-$(CONFIG_ACPI_HED) += hed.o
obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o
obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
obj-$(CONFIG_ACPI_BGRT) += bgrt.o
obj-$(CONFIG_ACPI_CPPC_LIB) += cppc_acpi.o
obj-$(CONFIG_ACPI_SPCR_TABLE) += spcr.o
obj-$(CONFIG_ACPI_DEBUGGER_USER) += acpi_dbg.o
# processor has its own "processor." module_param namespace
processor-y := processor_driver.o
processor-$(CONFIG_ACPI_PROCESSOR_IDLE) += processor_idle.o
processor-$(CONFIG_ACPI_CPU_FREQ_PSS) += processor_throttling.o \
processor_thermal.o
processor-$(CONFIG_CPU_FREQ) += processor_perflib.o
obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o
obj-$(CONFIG_ACPI_APEI) += apei/
obj-$(CONFIG_ACPI_EXTLOG) += acpi_extlog.o
obj-$(CONFIG_PMIC_OPREGION) += pmic/intel_pmic.o
obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
obj-$(CONFIG_BXT_WC_PMIC_OPREGION) += pmic/intel_pmic_bxtwc.o
obj-$(CONFIG_CHT_WC_PMIC_OPREGION) += pmic/intel_pmic_chtwc.o
obj-$(CONFIG_CHT_DC_TI_PMIC_OPREGION) += pmic/intel_pmic_chtdc_ti.o
obj-$(CONFIG_ACPI_CONFIGFS) += acpi_configfs.o
obj-$(CONFIG_TPS68470_PMIC_OPREGION) += pmic/tps68470_pmic.o
video-objs += acpi_video.o video_detect.o
obj-y += dptf/
obj-$(CONFIG_ARM64) += arm64/