forked from luck/tmp_suning_uos_patched
9699cb6bbe
Introducing the LM3692x Dual-String white LED driver. Data sheet is located http://www.ti.com/lit/ds/snvsa29/snvsa29.pdf Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
394 lines
9.8 KiB
C
394 lines
9.8 KiB
C
/*
|
|
* TI lm3692x LED Driver
|
|
*
|
|
* Copyright (C) 2017 Texas Instruments
|
|
*
|
|
* Author: Dan Murphy <dmurphy@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* Data sheet is located
|
|
* http://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
|
|
*/
|
|
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <uapi/linux/uleds.h>
|
|
|
|
#define LM3692X_REV 0x0
|
|
#define LM3692X_RESET 0x1
|
|
#define LM3692X_EN 0x10
|
|
#define LM3692X_BRT_CTRL 0x11
|
|
#define LM3692X_PWM_CTRL 0x12
|
|
#define LM3692X_BOOST_CTRL 0x13
|
|
#define LM3692X_AUTO_FREQ_HI 0x15
|
|
#define LM3692X_AUTO_FREQ_LO 0x16
|
|
#define LM3692X_BL_ADJ_THRESH 0x17
|
|
#define LM3692X_BRT_LSB 0x18
|
|
#define LM3692X_BRT_MSB 0x19
|
|
#define LM3692X_FAULT_CTRL 0x1e
|
|
#define LM3692X_FAULT_FLAGS 0x1f
|
|
|
|
#define LM3692X_SW_RESET BIT(0)
|
|
#define LM3692X_DEVICE_EN BIT(0)
|
|
#define LM3692X_LED1_EN BIT(1)
|
|
#define LM3692X_LED2_EN BIT(2)
|
|
|
|
/* Brightness Control Bits */
|
|
#define LM3692X_BL_ADJ_POL BIT(0)
|
|
#define LM3692X_RAMP_RATE_125us 0x00
|
|
#define LM3692X_RAMP_RATE_250us BIT(1)
|
|
#define LM3692X_RAMP_RATE_500us BIT(2)
|
|
#define LM3692X_RAMP_RATE_1ms (BIT(1) | BIT(2))
|
|
#define LM3692X_RAMP_RATE_2ms BIT(3)
|
|
#define LM3692X_RAMP_RATE_4ms (BIT(3) | BIT(1))
|
|
#define LM3692X_RAMP_RATE_8ms (BIT(2) | BIT(3))
|
|
#define LM3692X_RAMP_RATE_16ms (BIT(1) | BIT(2) | BIT(3))
|
|
#define LM3692X_RAMP_EN BIT(4)
|
|
#define LM3692X_BRHT_MODE_REG 0x00
|
|
#define LM3692X_BRHT_MODE_PWM BIT(5)
|
|
#define LM3692X_BRHT_MODE_MULTI_RAMP BIT(6)
|
|
#define LM3692X_BRHT_MODE_RAMP_MULTI (BIT(5) | BIT(6))
|
|
#define LM3692X_MAP_MODE_EXP BIT(7)
|
|
|
|
/* PWM Register Bits */
|
|
#define LM3692X_PWM_FILTER_100 BIT(0)
|
|
#define LM3692X_PWM_FILTER_150 BIT(1)
|
|
#define LM3692X_PWM_FILTER_200 (BIT(0) | BIT(1))
|
|
#define LM3692X_PWM_HYSTER_1LSB BIT(2)
|
|
#define LM3692X_PWM_HYSTER_2LSB BIT(3)
|
|
#define LM3692X_PWM_HYSTER_3LSB (BIT(3) | BIT(2))
|
|
#define LM3692X_PWM_HYSTER_4LSB BIT(4)
|
|
#define LM3692X_PWM_HYSTER_5LSB (BIT(4) | BIT(2))
|
|
#define LM3692X_PWM_HYSTER_6LSB (BIT(4) | BIT(3))
|
|
#define LM3692X_PWM_POLARITY BIT(5)
|
|
#define LM3692X_PWM_SAMP_4MHZ BIT(6)
|
|
#define LM3692X_PWM_SAMP_24MHZ BIT(7)
|
|
|
|
/* Boost Control Bits */
|
|
#define LM3692X_OCP_PROT_1A BIT(0)
|
|
#define LM3692X_OCP_PROT_1_25A BIT(1)
|
|
#define LM3692X_OCP_PROT_1_5A (BIT(0) | BIT(1))
|
|
#define LM3692X_OVP_21V BIT(2)
|
|
#define LM3692X_OVP_25V BIT(3)
|
|
#define LM3692X_OVP_29V (BIT(2) | BIT(3))
|
|
#define LM3692X_MIN_IND_22UH BIT(4)
|
|
#define LM3692X_BOOST_SW_1MHZ BIT(5)
|
|
#define LM3692X_BOOST_SW_NO_SHIFT BIT(6)
|
|
|
|
/* Fault Control Bits */
|
|
#define LM3692X_FAULT_CTRL_OVP BIT(0)
|
|
#define LM3692X_FAULT_CTRL_OCP BIT(1)
|
|
#define LM3692X_FAULT_CTRL_TSD BIT(2)
|
|
#define LM3692X_FAULT_CTRL_OPEN BIT(3)
|
|
|
|
/* Fault Flag Bits */
|
|
#define LM3692X_FAULT_FLAG_OVP BIT(0)
|
|
#define LM3692X_FAULT_FLAG_OCP BIT(1)
|
|
#define LM3692X_FAULT_FLAG_TSD BIT(2)
|
|
#define LM3692X_FAULT_FLAG_SHRT BIT(3)
|
|
#define LM3692X_FAULT_FLAG_OPEN BIT(4)
|
|
|
|
/**
|
|
* struct lm3692x_led -
|
|
* @lock - Lock for reading/writing the device
|
|
* @client - Pointer to the I2C client
|
|
* @led_dev - LED class device pointer
|
|
* @regmap - Devices register map
|
|
* @enable_gpio - VDDIO/EN gpio to enable communication interface
|
|
* @regulator - LED supply regulator pointer
|
|
* @label - LED label
|
|
*/
|
|
struct lm3692x_led {
|
|
struct mutex lock;
|
|
struct i2c_client *client;
|
|
struct led_classdev led_dev;
|
|
struct regmap *regmap;
|
|
struct gpio_desc *enable_gpio;
|
|
struct regulator *regulator;
|
|
char label[LED_MAX_NAME_SIZE];
|
|
};
|
|
|
|
static const struct reg_default lm3692x_reg_defs[] = {
|
|
{LM3692X_EN, 0xf},
|
|
{LM3692X_BRT_CTRL, 0x61},
|
|
{LM3692X_PWM_CTRL, 0x73},
|
|
{LM3692X_BOOST_CTRL, 0x6f},
|
|
{LM3692X_AUTO_FREQ_HI, 0x0},
|
|
{LM3692X_AUTO_FREQ_LO, 0x0},
|
|
{LM3692X_BL_ADJ_THRESH, 0x0},
|
|
{LM3692X_BRT_LSB, 0x7},
|
|
{LM3692X_BRT_MSB, 0xff},
|
|
{LM3692X_FAULT_CTRL, 0x7},
|
|
};
|
|
|
|
static const struct regmap_config lm3692x_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = LM3692X_FAULT_FLAGS,
|
|
.reg_defaults = lm3692x_reg_defs,
|
|
.num_reg_defaults = ARRAY_SIZE(lm3692x_reg_defs),
|
|
.cache_type = REGCACHE_RBTREE,
|
|
};
|
|
|
|
static int lm3692x_fault_check(struct lm3692x_led *led)
|
|
{
|
|
int ret;
|
|
unsigned int read_buf;
|
|
|
|
ret = regmap_read(led->regmap, LM3692X_FAULT_FLAGS, &read_buf);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (read_buf)
|
|
dev_err(&led->client->dev, "Detected a fault 0x%X\n", read_buf);
|
|
|
|
/* The first read may clear the fault. Check again to see if the fault
|
|
* still exits and return that value.
|
|
*/
|
|
regmap_read(led->regmap, LM3692X_FAULT_FLAGS, &read_buf);
|
|
if (read_buf)
|
|
dev_err(&led->client->dev, "Second read of fault flags 0x%X\n",
|
|
read_buf);
|
|
|
|
return read_buf;
|
|
}
|
|
|
|
static int lm3692x_brightness_set(struct led_classdev *led_cdev,
|
|
enum led_brightness brt_val)
|
|
{
|
|
struct lm3692x_led *led =
|
|
container_of(led_cdev, struct lm3692x_led, led_dev);
|
|
int ret;
|
|
int led_brightness_lsb = (brt_val >> 5);
|
|
|
|
mutex_lock(&led->lock);
|
|
|
|
ret = lm3692x_fault_check(led);
|
|
if (ret) {
|
|
dev_err(&led->client->dev, "Cannot read/clear faults\n");
|
|
goto out;
|
|
}
|
|
|
|
ret = regmap_write(led->regmap, LM3692X_BRT_MSB, brt_val);
|
|
if (ret) {
|
|
dev_err(&led->client->dev, "Cannot write MSB\n");
|
|
goto out;
|
|
}
|
|
|
|
ret = regmap_write(led->regmap, LM3692X_BRT_LSB, led_brightness_lsb);
|
|
if (ret) {
|
|
dev_err(&led->client->dev, "Cannot write LSB\n");
|
|
goto out;
|
|
}
|
|
out:
|
|
mutex_unlock(&led->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int lm3692x_init(struct lm3692x_led *led)
|
|
{
|
|
int ret;
|
|
|
|
if (led->regulator) {
|
|
ret = regulator_enable(led->regulator);
|
|
if (ret) {
|
|
dev_err(&led->client->dev,
|
|
"Failed to enable regulator\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (led->enable_gpio)
|
|
gpiod_direction_output(led->enable_gpio, 1);
|
|
|
|
ret = lm3692x_fault_check(led);
|
|
if (ret) {
|
|
dev_err(&led->client->dev, "Cannot read/clear faults\n");
|
|
goto out;
|
|
}
|
|
|
|
ret = regmap_write(led->regmap, LM3692X_BRT_CTRL, 0x00);
|
|
if (ret)
|
|
goto out;
|
|
|
|
/*
|
|
* For glitch free operation, the following data should
|
|
* only be written while device enable bit is 0
|
|
* per Section 7.5.14 of the data sheet
|
|
*/
|
|
ret = regmap_write(led->regmap, LM3692X_PWM_CTRL,
|
|
LM3692X_PWM_FILTER_100 | LM3692X_PWM_SAMP_24MHZ);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = regmap_write(led->regmap, LM3692X_BOOST_CTRL,
|
|
LM3692X_BRHT_MODE_RAMP_MULTI |
|
|
LM3692X_BL_ADJ_POL |
|
|
LM3692X_RAMP_RATE_250us);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = regmap_write(led->regmap, LM3692X_AUTO_FREQ_HI, 0x00);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = regmap_write(led->regmap, LM3692X_AUTO_FREQ_LO, 0x00);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = regmap_write(led->regmap, LM3692X_BL_ADJ_THRESH, 0x00);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = regmap_write(led->regmap, LM3692X_BRT_CTRL,
|
|
LM3692X_BL_ADJ_POL | LM3692X_PWM_HYSTER_4LSB);
|
|
if (ret)
|
|
goto out;
|
|
|
|
return ret;
|
|
out:
|
|
dev_err(&led->client->dev, "Fail writing initialization values\n");
|
|
|
|
if (led->enable_gpio)
|
|
gpiod_direction_output(led->enable_gpio, 0);
|
|
|
|
if (led->regulator) {
|
|
ret = regulator_disable(led->regulator);
|
|
if (ret)
|
|
dev_err(&led->client->dev,
|
|
"Failed to disable regulator\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lm3692x_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
int ret;
|
|
struct lm3692x_led *led;
|
|
struct device_node *np = client->dev.of_node;
|
|
struct device_node *child_node;
|
|
const char *name;
|
|
|
|
led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
|
|
if (!led)
|
|
return -ENOMEM;
|
|
|
|
for_each_available_child_of_node(np, child_node) {
|
|
led->led_dev.default_trigger = of_get_property(child_node,
|
|
"linux,default-trigger",
|
|
NULL);
|
|
|
|
ret = of_property_read_string(child_node, "label", &name);
|
|
if (!ret)
|
|
snprintf(led->label, sizeof(led->label),
|
|
"%s:%s", id->name, name);
|
|
else
|
|
snprintf(led->label, sizeof(led->label),
|
|
"%s::backlight_cluster", id->name);
|
|
};
|
|
|
|
led->enable_gpio = devm_gpiod_get_optional(&client->dev,
|
|
"enable", GPIOD_OUT_LOW);
|
|
if (IS_ERR(led->enable_gpio)) {
|
|
ret = PTR_ERR(led->enable_gpio);
|
|
dev_err(&client->dev, "Failed to get enable gpio: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
led->regulator = devm_regulator_get(&client->dev, "vled");
|
|
if (IS_ERR(led->regulator))
|
|
led->regulator = NULL;
|
|
|
|
led->client = client;
|
|
led->led_dev.name = led->label;
|
|
led->led_dev.brightness_set_blocking = lm3692x_brightness_set;
|
|
|
|
mutex_init(&led->lock);
|
|
|
|
i2c_set_clientdata(client, led);
|
|
|
|
led->regmap = devm_regmap_init_i2c(client, &lm3692x_regmap_config);
|
|
if (IS_ERR(led->regmap)) {
|
|
ret = PTR_ERR(led->regmap);
|
|
dev_err(&client->dev, "Failed to allocate register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = lm3692x_init(led);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_led_classdev_register(&client->dev, &led->led_dev);
|
|
if (ret) {
|
|
dev_err(&client->dev, "led register err: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lm3692x_remove(struct i2c_client *client)
|
|
{
|
|
struct lm3692x_led *led = i2c_get_clientdata(client);
|
|
int ret;
|
|
|
|
if (led->enable_gpio)
|
|
gpiod_direction_output(led->enable_gpio, 0);
|
|
|
|
if (led->regulator) {
|
|
ret = regulator_disable(led->regulator);
|
|
if (ret)
|
|
dev_err(&led->client->dev,
|
|
"Failed to disable regulator\n");
|
|
}
|
|
|
|
mutex_destroy(&led->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id lm3692x_id[] = {
|
|
{ "lm36922", 0 },
|
|
{ "lm36923", 1 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, lm3692x_id);
|
|
|
|
static const struct of_device_id of_lm3692x_leds_match[] = {
|
|
{ .compatible = "ti,lm36922", },
|
|
{ .compatible = "ti,lm36923", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, of_lm3692x_leds_match);
|
|
|
|
static struct i2c_driver lm3692x_driver = {
|
|
.driver = {
|
|
.name = "lm3692x",
|
|
.of_match_table = of_lm3692x_leds_match,
|
|
},
|
|
.probe = lm3692x_probe,
|
|
.remove = lm3692x_remove,
|
|
.id_table = lm3692x_id,
|
|
};
|
|
module_i2c_driver(lm3692x_driver);
|
|
|
|
MODULE_DESCRIPTION("Texas Instruments LM3692X LED driver");
|
|
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
|
|
MODULE_LICENSE("GPL v2");
|