forked from luck/tmp_suning_uos_patched
cd354f1ae7
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
354 lines
8.1 KiB
C
354 lines
8.1 KiB
C
/*
|
|
* Generic Generic NCR5380 driver
|
|
*
|
|
* Copyright 1995-2002, Russell King
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/ecard.h>
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
|
|
#include "../scsi.h"
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#include <scsi/scsicam.h>
|
|
|
|
#define AUTOSENSE
|
|
#define PSEUDO_DMA
|
|
|
|
#define CUMANASCSI_PUBLIC_RELEASE 1
|
|
|
|
#define NCR5380_implementation_fields int port, ctrl
|
|
#define NCR5380_local_declare() struct Scsi_Host *_instance
|
|
#define NCR5380_setup(instance) _instance = instance
|
|
#define NCR5380_read(reg) cumanascsi_read(_instance, reg)
|
|
#define NCR5380_write(reg, value) cumanascsi_write(_instance, reg, value)
|
|
#define NCR5380_intr cumanascsi_intr
|
|
#define NCR5380_queue_command cumanascsi_queue_command
|
|
#define NCR5380_proc_info cumanascsi_proc_info
|
|
|
|
#define BOARD_NORMAL 0
|
|
#define BOARD_NCR53C400 1
|
|
|
|
#include "../NCR5380.h"
|
|
|
|
void cumanascsi_setup(char *str, int *ints)
|
|
{
|
|
}
|
|
|
|
const char *cumanascsi_info(struct Scsi_Host *spnt)
|
|
{
|
|
return "";
|
|
}
|
|
|
|
#ifdef NOT_EFFICIENT
|
|
#define CTRL(p,v) outb(*ctrl = (v), (p) - 577)
|
|
#define STAT(p) inb((p)+1)
|
|
#define IN(p) inb((p))
|
|
#define OUT(v,p) outb((v), (p))
|
|
#else
|
|
#define CTRL(p,v) (p[-2308] = (*ctrl = (v)))
|
|
#define STAT(p) (p[4])
|
|
#define IN(p) (*(p))
|
|
#define IN2(p) ((unsigned short)(*(volatile unsigned long *)(p)))
|
|
#define OUT(v,p) (*(p) = (v))
|
|
#define OUT2(v,p) (*((volatile unsigned long *)(p)) = (v))
|
|
#endif
|
|
#define L(v) (((v)<<16)|((v) & 0x0000ffff))
|
|
#define H(v) (((v)>>16)|((v) & 0xffff0000))
|
|
|
|
static inline int
|
|
NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *addr, int len)
|
|
{
|
|
int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
|
|
int oldctrl = *ctrl;
|
|
unsigned long *laddr;
|
|
#ifdef NOT_EFFICIENT
|
|
int iobase = instance->io_port;
|
|
int dma_io = iobase & ~(0x3C0000>>2);
|
|
#else
|
|
volatile unsigned char *iobase = (unsigned char *)ioaddr(instance->io_port);
|
|
volatile unsigned char *dma_io = (unsigned char *)((int)iobase & ~0x3C0000);
|
|
#endif
|
|
|
|
if(!len) return 0;
|
|
|
|
CTRL(iobase, 0x02);
|
|
laddr = (unsigned long *)addr;
|
|
while(len >= 32)
|
|
{
|
|
int status;
|
|
unsigned long v;
|
|
status = STAT(iobase);
|
|
if(status & 0x80)
|
|
goto end;
|
|
if(!(status & 0x40))
|
|
continue;
|
|
v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io);
|
|
v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io);
|
|
v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io);
|
|
v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io);
|
|
v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io);
|
|
v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io);
|
|
v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io);
|
|
v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io);
|
|
len -= 32;
|
|
if(len == 0)
|
|
break;
|
|
}
|
|
|
|
addr = (unsigned char *)laddr;
|
|
CTRL(iobase, 0x12);
|
|
while(len > 0)
|
|
{
|
|
int status;
|
|
status = STAT(iobase);
|
|
if(status & 0x80)
|
|
goto end;
|
|
if(status & 0x40)
|
|
{
|
|
OUT(*addr++, dma_io);
|
|
if(--len == 0)
|
|
break;
|
|
}
|
|
|
|
status = STAT(iobase);
|
|
if(status & 0x80)
|
|
goto end;
|
|
if(status & 0x40)
|
|
{
|
|
OUT(*addr++, dma_io);
|
|
if(--len == 0)
|
|
break;
|
|
}
|
|
}
|
|
end:
|
|
CTRL(iobase, oldctrl|0x40);
|
|
return len;
|
|
}
|
|
|
|
static inline int
|
|
NCR5380_pread(struct Scsi_Host *instance, unsigned char *addr, int len)
|
|
{
|
|
int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
|
|
int oldctrl = *ctrl;
|
|
unsigned long *laddr;
|
|
#ifdef NOT_EFFICIENT
|
|
int iobase = instance->io_port;
|
|
int dma_io = iobase & ~(0x3C0000>>2);
|
|
#else
|
|
volatile unsigned char *iobase = (unsigned char *)ioaddr(instance->io_port);
|
|
volatile unsigned char *dma_io = (unsigned char *)((int)iobase & ~0x3C0000);
|
|
#endif
|
|
|
|
if(!len) return 0;
|
|
|
|
CTRL(iobase, 0x00);
|
|
laddr = (unsigned long *)addr;
|
|
while(len >= 32)
|
|
{
|
|
int status;
|
|
status = STAT(iobase);
|
|
if(status & 0x80)
|
|
goto end;
|
|
if(!(status & 0x40))
|
|
continue;
|
|
*laddr++ = IN2(dma_io)|(IN2(dma_io)<<16);
|
|
*laddr++ = IN2(dma_io)|(IN2(dma_io)<<16);
|
|
*laddr++ = IN2(dma_io)|(IN2(dma_io)<<16);
|
|
*laddr++ = IN2(dma_io)|(IN2(dma_io)<<16);
|
|
*laddr++ = IN2(dma_io)|(IN2(dma_io)<<16);
|
|
*laddr++ = IN2(dma_io)|(IN2(dma_io)<<16);
|
|
*laddr++ = IN2(dma_io)|(IN2(dma_io)<<16);
|
|
*laddr++ = IN2(dma_io)|(IN2(dma_io)<<16);
|
|
len -= 32;
|
|
if(len == 0)
|
|
break;
|
|
}
|
|
|
|
addr = (unsigned char *)laddr;
|
|
CTRL(iobase, 0x10);
|
|
while(len > 0)
|
|
{
|
|
int status;
|
|
status = STAT(iobase);
|
|
if(status & 0x80)
|
|
goto end;
|
|
if(status & 0x40)
|
|
{
|
|
*addr++ = IN(dma_io);
|
|
if(--len == 0)
|
|
break;
|
|
}
|
|
|
|
status = STAT(iobase);
|
|
if(status & 0x80)
|
|
goto end;
|
|
if(status & 0x40)
|
|
{
|
|
*addr++ = IN(dma_io);
|
|
if(--len == 0)
|
|
break;
|
|
}
|
|
}
|
|
end:
|
|
CTRL(iobase, oldctrl|0x40);
|
|
return len;
|
|
}
|
|
|
|
#undef STAT
|
|
#undef CTRL
|
|
#undef IN
|
|
#undef OUT
|
|
|
|
#define CTRL(p,v) outb(*ctrl = (v), (p) - 577)
|
|
|
|
static char cumanascsi_read(struct Scsi_Host *instance, int reg)
|
|
{
|
|
unsigned int iobase = instance->io_port;
|
|
int i;
|
|
int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
|
|
|
|
CTRL(iobase, 0);
|
|
i = inb(iobase + 64 + reg);
|
|
CTRL(iobase, 0x40);
|
|
|
|
return i;
|
|
}
|
|
|
|
static void cumanascsi_write(struct Scsi_Host *instance, int reg, int value)
|
|
{
|
|
int iobase = instance->io_port;
|
|
int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
|
|
|
|
CTRL(iobase, 0);
|
|
outb(value, iobase + 64 + reg);
|
|
CTRL(iobase, 0x40);
|
|
}
|
|
|
|
#undef CTRL
|
|
|
|
#include "../NCR5380.c"
|
|
|
|
static struct scsi_host_template cumanascsi_template = {
|
|
.module = THIS_MODULE,
|
|
.name = "Cumana 16-bit SCSI",
|
|
.info = cumanascsi_info,
|
|
.queuecommand = cumanascsi_queue_command,
|
|
.eh_abort_handler = NCR5380_abort,
|
|
.eh_bus_reset_handler = NCR5380_bus_reset,
|
|
.can_queue = 16,
|
|
.this_id = 7,
|
|
.sg_tablesize = SG_ALL,
|
|
.cmd_per_lun = 2,
|
|
.unchecked_isa_dma = 0,
|
|
.use_clustering = DISABLE_CLUSTERING,
|
|
.proc_name = "CumanaSCSI-1",
|
|
};
|
|
|
|
static int __devinit
|
|
cumanascsi1_probe(struct expansion_card *ec, const struct ecard_id *id)
|
|
{
|
|
struct Scsi_Host *host;
|
|
int ret = -ENOMEM;
|
|
|
|
host = scsi_host_alloc(&cumanascsi_template, sizeof(struct NCR5380_hostdata));
|
|
if (!host)
|
|
goto out;
|
|
|
|
host->io_port = ecard_address(ec, ECARD_IOC, ECARD_SLOW) + 0x800;
|
|
host->irq = ec->irq;
|
|
|
|
NCR5380_init(host, 0);
|
|
|
|
host->n_io_port = 255;
|
|
if (!(request_region(host->io_port, host->n_io_port, "CumanaSCSI-1"))) {
|
|
ret = -EBUSY;
|
|
goto out_free;
|
|
}
|
|
|
|
((struct NCR5380_hostdata *)host->hostdata)->ctrl = 0;
|
|
outb(0x00, host->io_port - 577);
|
|
|
|
ret = request_irq(host->irq, cumanascsi_intr, IRQF_DISABLED,
|
|
"CumanaSCSI-1", host);
|
|
if (ret) {
|
|
printk("scsi%d: IRQ%d not free: %d\n",
|
|
host->host_no, host->irq, ret);
|
|
goto out_release;
|
|
}
|
|
|
|
printk("scsi%d: at port 0x%08lx irq %d",
|
|
host->host_no, host->io_port, host->irq);
|
|
printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
|
|
host->can_queue, host->cmd_per_lun, CUMANASCSI_PUBLIC_RELEASE);
|
|
printk("\nscsi%d:", host->host_no);
|
|
NCR5380_print_options(host);
|
|
printk("\n");
|
|
|
|
ret = scsi_add_host(host, &ec->dev);
|
|
if (ret)
|
|
goto out_free_irq;
|
|
|
|
scsi_scan_host(host);
|
|
goto out;
|
|
|
|
out_free_irq:
|
|
free_irq(host->irq, host);
|
|
out_release:
|
|
release_region(host->io_port, host->n_io_port);
|
|
out_free:
|
|
scsi_host_put(host);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static void __devexit cumanascsi1_remove(struct expansion_card *ec)
|
|
{
|
|
struct Scsi_Host *host = ecard_get_drvdata(ec);
|
|
|
|
ecard_set_drvdata(ec, NULL);
|
|
|
|
scsi_remove_host(host);
|
|
free_irq(host->irq, host);
|
|
NCR5380_exit(host);
|
|
release_region(host->io_port, host->n_io_port);
|
|
scsi_host_put(host);
|
|
}
|
|
|
|
static const struct ecard_id cumanascsi1_cids[] = {
|
|
{ MANU_CUMANA, PROD_CUMANA_SCSI_1 },
|
|
{ 0xffff, 0xffff }
|
|
};
|
|
|
|
static struct ecard_driver cumanascsi1_driver = {
|
|
.probe = cumanascsi1_probe,
|
|
.remove = __devexit_p(cumanascsi1_remove),
|
|
.id_table = cumanascsi1_cids,
|
|
.drv = {
|
|
.name = "cumanascsi1",
|
|
},
|
|
};
|
|
|
|
static int __init cumanascsi_init(void)
|
|
{
|
|
return ecard_register_driver(&cumanascsi1_driver);
|
|
}
|
|
|
|
static void __exit cumanascsi_exit(void)
|
|
{
|
|
ecard_remove_driver(&cumanascsi1_driver);
|
|
}
|
|
|
|
module_init(cumanascsi_init);
|
|
module_exit(cumanascsi_exit);
|
|
|
|
MODULE_DESCRIPTION("Cumana SCSI-1 driver for Acorn machines");
|
|
MODULE_LICENSE("GPL");
|