kernel_optimize_test/drivers/soc/ti
Suman Anna 6530cd9b20 soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM65x SoCs
The K3 AM65x family of SoCs have the next generation of the PRU-ICSS
processor subsystem capable of supporting Gigabit Ethernet, and is
commonly referred to as ICSSG. These SoCs contain typically three
ICSSG instances named ICSSG0, ICSSG1 and ICSSG2. The three ICSSGs are
identical to each other for the most part with minor SoC integration
differences and capabilities. The ICSSG2 supports slightly enhanced
features like SGMII mode Ethernet, while the ICSS0 and ICSSG1 instances
are limited to MII mode only.

The ICSSGs on K3 AM65x SoCs are in general super-sets of the PRUSS on the
AM57xx/66AK2G SoCs. They include two additional auxiliary PRU cores called
RTUs and few other additional sub-modules. The interrupt integration is
also different on the K3 AM65x SoCs and are propagated through various
SoC-level Interrupt Router and Interrupt Aggregator blocks. Other IP level
differences include different constant tables, differences in system event
interrupt input sources etc. They also do not have a programmable module
reset line like those present on AM33xx/AM43xx SoCs. The modules are reset
just like any other IP with the SoC's global cold/warm resets.

The existing pruss platform driver has been updated to support these new
ICSSG instances through new AM65x specific compatibles. A build dependency
with ARCH_K3 is added to enable building all the existing PRUSS platform
drivers for this ARMv8 platform.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-09-11 21:43:36 -07:00
..
k3-ringacc.c soc: ti: k3: ringacc: add am65x sr2.0 support 2020-09-11 21:34:17 -07:00
k3-socinfo.c soc: ti: add k3 platforms chipid module driver 2020-05-27 20:39:14 -07:00
Kconfig soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM65x SoCs 2020-09-11 21:43:36 -07:00
knav_dma.c soc: ti: knav_dma: Use proper enum in pktdma_init_chan 2019-01-30 10:22:17 -08:00
knav_qmss_acc.c soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static 2020-07-24 14:47:10 -07:00
knav_qmss_queue.c drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static 2020-05-27 20:39:14 -07:00
knav_qmss.h soc: ti: Replace zero-length array with flexible-array 2020-06-15 23:08:32 -05:00
Makefile soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs 2020-09-11 21:43:34 -07:00
omap_prm.c soc: ti: omap-prm: use atomic iopoll instead of sleeping one 2020-05-19 11:20:53 -07:00
pm33xx.c soc: ti: pm33xx: Add base cpuidle support 2020-02-27 09:27:28 -08:00
pruss.c soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM65x SoCs 2020-09-11 21:43:36 -07:00
ti_sci_inta_msi.c soc: ti: Add MSI domain bus support for Interrupt Aggregator 2019-05-01 10:49:17 +01:00
ti_sci_pm_domains.c soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access 2019-09-04 20:44:35 +02:00
wkup_m3_ipc.c soc: ti: wkup_m3_ipc: Fix race condition with rproc_boot 2019-12-17 15:18:36 -08:00