forked from luck/tmp_suning_uos_patched
75722d3992
This adds a new thermal control framework for PowerMac, along with the implementation for PowerMac8,1, PowerMac8,2 (iMac G5 rev 1 and 2), and PowerMac9,1 (latest single CPU desktop). In the future, I expect to move the older G5 thermal control to the new framework as well. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
264 lines
5.9 KiB
C
264 lines
5.9 KiB
C
/*
|
|
* Windfarm PowerMac thermal control. LM75 sensor
|
|
*
|
|
* (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
|
|
* <benh@kernel.crashing.org>
|
|
*
|
|
* Released under the term of the GNU GPL v2.
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-dev.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
#include <asm/sections.h>
|
|
|
|
#include "windfarm.h"
|
|
|
|
#define VERSION "0.1"
|
|
|
|
#undef DEBUG
|
|
|
|
#ifdef DEBUG
|
|
#define DBG(args...) printk(args)
|
|
#else
|
|
#define DBG(args...) do { } while(0)
|
|
#endif
|
|
|
|
struct wf_lm75_sensor {
|
|
int ds1775 : 1;
|
|
int inited : 1;
|
|
struct i2c_client i2c;
|
|
struct wf_sensor sens;
|
|
};
|
|
#define wf_to_lm75(c) container_of(c, struct wf_lm75_sensor, sens)
|
|
#define i2c_to_lm75(c) container_of(c, struct wf_lm75_sensor, i2c)
|
|
|
|
static int wf_lm75_attach(struct i2c_adapter *adapter);
|
|
static int wf_lm75_detach(struct i2c_client *client);
|
|
|
|
static struct i2c_driver wf_lm75_driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "wf_lm75",
|
|
.flags = I2C_DF_NOTIFY,
|
|
.attach_adapter = wf_lm75_attach,
|
|
.detach_client = wf_lm75_detach,
|
|
};
|
|
|
|
static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
|
|
{
|
|
struct wf_lm75_sensor *lm = wf_to_lm75(sr);
|
|
s32 data;
|
|
|
|
if (lm->i2c.adapter == NULL)
|
|
return -ENODEV;
|
|
|
|
/* Init chip if necessary */
|
|
if (!lm->inited) {
|
|
u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(&lm->i2c, 1);
|
|
|
|
DBG("wf_lm75: Initializing %s, cfg was: %02x\n",
|
|
sr->name, cfg);
|
|
|
|
/* clear shutdown bit, keep other settings as left by
|
|
* the firmware for now
|
|
*/
|
|
cfg_new = cfg & ~0x01;
|
|
i2c_smbus_write_byte_data(&lm->i2c, 1, cfg_new);
|
|
lm->inited = 1;
|
|
|
|
/* If we just powered it up, let's wait 200 ms */
|
|
msleep(200);
|
|
}
|
|
|
|
/* Read temperature register */
|
|
data = (s32)le16_to_cpu(i2c_smbus_read_word_data(&lm->i2c, 0));
|
|
data <<= 8;
|
|
*value = data;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wf_lm75_release(struct wf_sensor *sr)
|
|
{
|
|
struct wf_lm75_sensor *lm = wf_to_lm75(sr);
|
|
|
|
/* check if client is registered and detach from i2c */
|
|
if (lm->i2c.adapter) {
|
|
i2c_detach_client(&lm->i2c);
|
|
lm->i2c.adapter = NULL;
|
|
}
|
|
|
|
kfree(lm);
|
|
}
|
|
|
|
static struct wf_sensor_ops wf_lm75_ops = {
|
|
.get_value = wf_lm75_get,
|
|
.release = wf_lm75_release,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter,
|
|
u8 addr, int ds1775,
|
|
const char *loc)
|
|
{
|
|
struct wf_lm75_sensor *lm;
|
|
|
|
DBG("wf_lm75: creating %s device at address 0x%02x\n",
|
|
ds1775 ? "ds1775" : "lm75", addr);
|
|
|
|
lm = kmalloc(sizeof(struct wf_lm75_sensor), GFP_KERNEL);
|
|
if (lm == NULL)
|
|
return NULL;
|
|
memset(lm, 0, sizeof(struct wf_lm75_sensor));
|
|
|
|
/* Usual rant about sensor names not beeing very consistent in
|
|
* the device-tree, oh well ...
|
|
* Add more entries below as you deal with more setups
|
|
*/
|
|
if (!strcmp(loc, "Hard drive") || !strcmp(loc, "DRIVE BAY"))
|
|
lm->sens.name = "hd-temp";
|
|
else
|
|
goto fail;
|
|
|
|
lm->inited = 0;
|
|
lm->sens.ops = &wf_lm75_ops;
|
|
lm->ds1775 = ds1775;
|
|
lm->i2c.addr = (addr >> 1) & 0x7f;
|
|
lm->i2c.adapter = adapter;
|
|
lm->i2c.driver = &wf_lm75_driver;
|
|
strncpy(lm->i2c.name, lm->sens.name, I2C_NAME_SIZE-1);
|
|
|
|
if (i2c_attach_client(&lm->i2c)) {
|
|
printk(KERN_ERR "windfarm: failed to attach %s %s to i2c\n",
|
|
ds1775 ? "ds1775" : "lm75", lm->i2c.name);
|
|
goto fail;
|
|
}
|
|
|
|
if (wf_register_sensor(&lm->sens)) {
|
|
i2c_detach_client(&lm->i2c);
|
|
goto fail;
|
|
}
|
|
|
|
return lm;
|
|
fail:
|
|
kfree(lm);
|
|
return NULL;
|
|
}
|
|
|
|
static int wf_lm75_attach(struct i2c_adapter *adapter)
|
|
{
|
|
u8 bus_id;
|
|
struct device_node *smu, *bus, *dev;
|
|
|
|
/* We currently only deal with LM75's hanging off the SMU
|
|
* i2c busses. If we extend that driver to other/older
|
|
* machines, we should split this function into SMU-i2c,
|
|
* keywest-i2c, PMU-i2c, ...
|
|
*/
|
|
|
|
DBG("wf_lm75: adapter %s detected\n", adapter->name);
|
|
|
|
if (strncmp(adapter->name, "smu-i2c-", 8) != 0)
|
|
return 0;
|
|
smu = of_find_node_by_type(NULL, "smu");
|
|
if (smu == NULL)
|
|
return 0;
|
|
|
|
/* Look for the bus in the device-tree */
|
|
bus_id = (u8)simple_strtoul(adapter->name + 8, NULL, 16);
|
|
|
|
DBG("wf_lm75: bus ID is %x\n", bus_id);
|
|
|
|
/* Look for sensors subdir */
|
|
for (bus = NULL;
|
|
(bus = of_get_next_child(smu, bus)) != NULL;) {
|
|
u32 *reg;
|
|
|
|
if (strcmp(bus->name, "i2c"))
|
|
continue;
|
|
reg = (u32 *)get_property(bus, "reg", NULL);
|
|
if (reg == NULL)
|
|
continue;
|
|
if (bus_id == *reg)
|
|
break;
|
|
}
|
|
of_node_put(smu);
|
|
if (bus == NULL) {
|
|
printk(KERN_WARNING "windfarm: SMU i2c bus 0x%x not found"
|
|
" in device-tree !\n", bus_id);
|
|
return 0;
|
|
}
|
|
|
|
DBG("wf_lm75: bus found, looking for device...\n");
|
|
|
|
/* Now look for lm75(s) in there */
|
|
for (dev = NULL;
|
|
(dev = of_get_next_child(bus, dev)) != NULL;) {
|
|
const char *loc =
|
|
get_property(dev, "hwsensor-location", NULL);
|
|
u32 *reg = (u32 *)get_property(dev, "reg", NULL);
|
|
DBG(" dev: %s... (loc: %p, reg: %p)\n", dev->name, loc, reg);
|
|
if (loc == NULL || reg == NULL)
|
|
continue;
|
|
/* real lm75 */
|
|
if (device_is_compatible(dev, "lm75"))
|
|
wf_lm75_create(adapter, *reg, 0, loc);
|
|
/* ds1775 (compatible, better resolution */
|
|
else if (device_is_compatible(dev, "ds1775"))
|
|
wf_lm75_create(adapter, *reg, 1, loc);
|
|
}
|
|
|
|
of_node_put(bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wf_lm75_detach(struct i2c_client *client)
|
|
{
|
|
struct wf_lm75_sensor *lm = i2c_to_lm75(client);
|
|
|
|
DBG("wf_lm75: i2c detatch called for %s\n", lm->sens.name);
|
|
|
|
/* Mark client detached */
|
|
lm->i2c.adapter = NULL;
|
|
|
|
/* release sensor */
|
|
wf_unregister_sensor(&lm->sens);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init wf_lm75_sensor_init(void)
|
|
{
|
|
int rc;
|
|
|
|
rc = i2c_add_driver(&wf_lm75_driver);
|
|
if (rc < 0)
|
|
return rc;
|
|
return 0;
|
|
}
|
|
|
|
static void __exit wf_lm75_sensor_exit(void)
|
|
{
|
|
i2c_del_driver(&wf_lm75_driver);
|
|
}
|
|
|
|
|
|
module_init(wf_lm75_sensor_init);
|
|
module_exit(wf_lm75_sensor_exit);
|
|
|
|
MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
|
|
MODULE_DESCRIPTION("LM75 sensor objects for PowerMacs thermal control");
|
|
MODULE_LICENSE("GPL");
|
|
|