kernel_optimize_test/drivers/mtd/nand
Martin Kepplinger d5d27fd982 mtd: rawnand: gpmi: fix MX28 bus master lockup problem
Disable BCH soft reset according to MX23 erratum #2847 ("BCH soft
reset may cause bus master lock up") for MX28 too. It has the same
problem.

Observed problem: once per 100,000+ MX28 reboots NAND read failed on
DMA timeout errors:
[    1.770823] UBI: attaching mtd3 to ubi0
[    2.768088] gpmi_nand: DMA timeout, last DMA :1
[    3.958087] gpmi_nand: BCH timeout, last DMA :1
[    4.156033] gpmi_nand: Error in ECC-based read: -110
[    4.161136] UBI warning: ubi_io_read: error -110 while reading 64
bytes from PEB 0:0, read only 0 bytes, retry
[    4.171283] step 1 error
[    4.173846] gpmi_nand: Chip: 0, Error -1

Without BCH soft reset we successfully executed 1,000,000 MX28 reboots.

I have a quote from NXP regarding this problem, from July 18th 2016:

"As the i.MX23 and i.MX28 are of the same generation, they share many
characteristics. Unfortunately, also the erratas may be shared.
In case of the documented erratas and the workarounds, you can also
apply the workaround solution of one device on the other one. This have
been reported, but I’m afraid that there are not an estimated date for
updating the Errata documents.
Please accept our apologies for any inconveniences this may cause."

Fixes: 6f2a6a5256 ("mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems")
Cc: stable@vger.kernel.org
Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-02-06 09:39:22 +01:00
..
onenand mtd: onenand: use mtd_device_register() where applicable 2018-07-19 23:14:12 +02:00
raw mtd: rawnand: gpmi: fix MX28 bus master lockup problem 2019-02-06 09:39:22 +01:00
spi mtd: spinand: Fix the error/cleanup path in spinand_init() 2019-01-31 12:31:02 +01:00
bbt.c mtd: nand: Fix memory allocation in nanddev_bbt_init() 2018-11-28 15:41:50 +01:00
core.c mtd: nand: Fix nanddev_mtd_erase() 2018-04-22 19:59:29 +02:00
Kconfig mtd: nand: Add core infrastructure to support SPI NANDs 2018-07-18 09:24:10 +02:00
Makefile mtd: nand: Add core infrastructure to support SPI NANDs 2018-07-18 09:24:10 +02:00