kernel_optimize_test/arch/arm/boot/dts/kirkwood-goflexnet.dts
Andrew Lunn f39c1101dd ARM: Kirkwood: Replace mrvl with marvell
It has been decided to use marvell, not mrvl, in the compatibility
property. Search & replace.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27 16:50:57 +02:00

100 lines
1.7 KiB
Plaintext

/dts-v1/;
/include/ "kirkwood.dtsi"
/ {
model = "Seagate GoFlex Net";
compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
};
ocp@f1000000 {
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};
nand@3000000 {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x400000>;
};
partition@500000 {
label = "pogoplug";
reg = <0x0500000 0x2000000>;
};
partition@2500000 {
label = "root";
reg = <0x02500000 0xd800000>;
};
};
sata@80000 {
status = "okay";
nr-ports = <2>;
};
};
gpio-leds {
compatible = "gpio-leds";
health {
label = "status:green:health";
gpios = <&gpio1 14 1>;
linux,default-trigger = "default-on";
};
fault {
label = "status:orange:fault";
gpios = <&gpio1 15 1>;
};
left0 {
label = "status:white:left0";
gpios = <&gpio1 10 0>;
};
left1 {
label = "status:white:left1";
gpios = <&gpio1 11 0>;
};
left2 {
label = "status:white:left2";
gpios = <&gpio1 12 0>;
};
left3 {
label = "status:white:left3";
gpios = <&gpio1 13 0>;
};
right0 {
label = "status:white:right0";
gpios = <&gpio1 6 0>;
};
right1 {
label = "status:white:right1";
gpios = <&gpio1 7 0>;
};
right2 {
label = "status:white:right2";
gpios = <&gpio1 8 0>;
};
right3 {
label = "status:white:right3";
gpios = <&gpio1 9 0>;
};
};
};