forked from luck/tmp_suning_uos_patched
008eb957da
A randconfig build hit the following build errors because xhci.c and xhci-mem.c use dma mapping functions but don't include <linux/dma-mapping.h>. Add the missing includes to fix the build errors. drivers/usb/host/xhci.c In function 'xhci_gen_setup': drivers/usb/host/xhci.c +4872 : error: implicit declaration of function 'dma_set_mask' drivers/usb/host/xhci.c +4872 : error: implicit declaration of function 'DMA_BIT_MASK' drivers/usb/host/xhci-mem.c In function 'xhci_free_stream_ctx': drivers/usb/host/xhci-mem.c +435 : error: implicit declaration of function 'dma_free_coherent' drivers/usb/host/xhci-mem.c In function 'xhci_alloc_stream_ctx': drivers/usb/host/xhci-mem.c +463 : error: implicit declaration of function 'dma_alloc_coherent' Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2497 lines
74 KiB
C
2497 lines
74 KiB
C
/*
|
||
* xHCI host controller driver
|
||
*
|
||
* Copyright (C) 2008 Intel Corp.
|
||
*
|
||
* Author: Sarah Sharp
|
||
* Some code borrowed from the Linux EHCI driver.
|
||
*
|
||
* This program is free software; you can redistribute it and/or modify
|
||
* it under the terms of the GNU General Public License version 2 as
|
||
* published by the Free Software Foundation.
|
||
*
|
||
* This program is distributed in the hope that it will be useful, but
|
||
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
||
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
||
* for more details.
|
||
*
|
||
* You should have received a copy of the GNU General Public License
|
||
* along with this program; if not, write to the Free Software Foundation,
|
||
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||
*/
|
||
|
||
#include <linux/usb.h>
|
||
#include <linux/pci.h>
|
||
#include <linux/slab.h>
|
||
#include <linux/dmapool.h>
|
||
#include <linux/dma-mapping.h>
|
||
|
||
#include "xhci.h"
|
||
|
||
/*
|
||
* Allocates a generic ring segment from the ring pool, sets the dma address,
|
||
* initializes the segment to zero, and sets the private next pointer to NULL.
|
||
*
|
||
* Section 4.11.1.1:
|
||
* "All components of all Command and Transfer TRBs shall be initialized to '0'"
|
||
*/
|
||
static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci,
|
||
unsigned int cycle_state, gfp_t flags)
|
||
{
|
||
struct xhci_segment *seg;
|
||
dma_addr_t dma;
|
||
int i;
|
||
|
||
seg = kzalloc(sizeof *seg, flags);
|
||
if (!seg)
|
||
return NULL;
|
||
|
||
seg->trbs = dma_pool_alloc(xhci->segment_pool, flags, &dma);
|
||
if (!seg->trbs) {
|
||
kfree(seg);
|
||
return NULL;
|
||
}
|
||
|
||
memset(seg->trbs, 0, TRB_SEGMENT_SIZE);
|
||
/* If the cycle state is 0, set the cycle bit to 1 for all the TRBs */
|
||
if (cycle_state == 0) {
|
||
for (i = 0; i < TRBS_PER_SEGMENT; i++)
|
||
seg->trbs[i].link.control |= TRB_CYCLE;
|
||
}
|
||
seg->dma = dma;
|
||
seg->next = NULL;
|
||
|
||
return seg;
|
||
}
|
||
|
||
static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
|
||
{
|
||
if (seg->trbs) {
|
||
dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
|
||
seg->trbs = NULL;
|
||
}
|
||
kfree(seg);
|
||
}
|
||
|
||
static void xhci_free_segments_for_ring(struct xhci_hcd *xhci,
|
||
struct xhci_segment *first)
|
||
{
|
||
struct xhci_segment *seg;
|
||
|
||
seg = first->next;
|
||
while (seg != first) {
|
||
struct xhci_segment *next = seg->next;
|
||
xhci_segment_free(xhci, seg);
|
||
seg = next;
|
||
}
|
||
xhci_segment_free(xhci, first);
|
||
}
|
||
|
||
/*
|
||
* Make the prev segment point to the next segment.
|
||
*
|
||
* Change the last TRB in the prev segment to be a Link TRB which points to the
|
||
* DMA address of the next segment. The caller needs to set any Link TRB
|
||
* related flags, such as End TRB, Toggle Cycle, and no snoop.
|
||
*/
|
||
static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
|
||
struct xhci_segment *next, enum xhci_ring_type type)
|
||
{
|
||
u32 val;
|
||
|
||
if (!prev || !next)
|
||
return;
|
||
prev->next = next;
|
||
if (type != TYPE_EVENT) {
|
||
prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr =
|
||
cpu_to_le64(next->dma);
|
||
|
||
/* Set the last TRB in the segment to have a TRB type ID of Link TRB */
|
||
val = le32_to_cpu(prev->trbs[TRBS_PER_SEGMENT-1].link.control);
|
||
val &= ~TRB_TYPE_BITMASK;
|
||
val |= TRB_TYPE(TRB_LINK);
|
||
/* Always set the chain bit with 0.95 hardware */
|
||
/* Set chain bit for isoc rings on AMD 0.96 host */
|
||
if (xhci_link_trb_quirk(xhci) ||
|
||
(type == TYPE_ISOC &&
|
||
(xhci->quirks & XHCI_AMD_0x96_HOST)))
|
||
val |= TRB_CHAIN;
|
||
prev->trbs[TRBS_PER_SEGMENT-1].link.control = cpu_to_le32(val);
|
||
}
|
||
}
|
||
|
||
/*
|
||
* Link the ring to the new segments.
|
||
* Set Toggle Cycle for the new ring if needed.
|
||
*/
|
||
static void xhci_link_rings(struct xhci_hcd *xhci, struct xhci_ring *ring,
|
||
struct xhci_segment *first, struct xhci_segment *last,
|
||
unsigned int num_segs)
|
||
{
|
||
struct xhci_segment *next;
|
||
|
||
if (!ring || !first || !last)
|
||
return;
|
||
|
||
next = ring->enq_seg->next;
|
||
xhci_link_segments(xhci, ring->enq_seg, first, ring->type);
|
||
xhci_link_segments(xhci, last, next, ring->type);
|
||
ring->num_segs += num_segs;
|
||
ring->num_trbs_free += (TRBS_PER_SEGMENT - 1) * num_segs;
|
||
|
||
if (ring->type != TYPE_EVENT && ring->enq_seg == ring->last_seg) {
|
||
ring->last_seg->trbs[TRBS_PER_SEGMENT-1].link.control
|
||
&= ~cpu_to_le32(LINK_TOGGLE);
|
||
last->trbs[TRBS_PER_SEGMENT-1].link.control
|
||
|= cpu_to_le32(LINK_TOGGLE);
|
||
ring->last_seg = last;
|
||
}
|
||
}
|
||
|
||
/* XXX: Do we need the hcd structure in all these functions? */
|
||
void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring)
|
||
{
|
||
if (!ring)
|
||
return;
|
||
|
||
if (ring->first_seg)
|
||
xhci_free_segments_for_ring(xhci, ring->first_seg);
|
||
|
||
kfree(ring);
|
||
}
|
||
|
||
static void xhci_initialize_ring_info(struct xhci_ring *ring,
|
||
unsigned int cycle_state)
|
||
{
|
||
/* The ring is empty, so the enqueue pointer == dequeue pointer */
|
||
ring->enqueue = ring->first_seg->trbs;
|
||
ring->enq_seg = ring->first_seg;
|
||
ring->dequeue = ring->enqueue;
|
||
ring->deq_seg = ring->first_seg;
|
||
/* The ring is initialized to 0. The producer must write 1 to the cycle
|
||
* bit to handover ownership of the TRB, so PCS = 1. The consumer must
|
||
* compare CCS to the cycle bit to check ownership, so CCS = 1.
|
||
*
|
||
* New rings are initialized with cycle state equal to 1; if we are
|
||
* handling ring expansion, set the cycle state equal to the old ring.
|
||
*/
|
||
ring->cycle_state = cycle_state;
|
||
/* Not necessary for new rings, but needed for re-initialized rings */
|
||
ring->enq_updates = 0;
|
||
ring->deq_updates = 0;
|
||
|
||
/*
|
||
* Each segment has a link TRB, and leave an extra TRB for SW
|
||
* accounting purpose
|
||
*/
|
||
ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1;
|
||
}
|
||
|
||
/* Allocate segments and link them for a ring */
|
||
static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci,
|
||
struct xhci_segment **first, struct xhci_segment **last,
|
||
unsigned int num_segs, unsigned int cycle_state,
|
||
enum xhci_ring_type type, gfp_t flags)
|
||
{
|
||
struct xhci_segment *prev;
|
||
|
||
prev = xhci_segment_alloc(xhci, cycle_state, flags);
|
||
if (!prev)
|
||
return -ENOMEM;
|
||
num_segs--;
|
||
|
||
*first = prev;
|
||
while (num_segs > 0) {
|
||
struct xhci_segment *next;
|
||
|
||
next = xhci_segment_alloc(xhci, cycle_state, flags);
|
||
if (!next) {
|
||
prev = *first;
|
||
while (prev) {
|
||
next = prev->next;
|
||
xhci_segment_free(xhci, prev);
|
||
prev = next;
|
||
}
|
||
return -ENOMEM;
|
||
}
|
||
xhci_link_segments(xhci, prev, next, type);
|
||
|
||
prev = next;
|
||
num_segs--;
|
||
}
|
||
xhci_link_segments(xhci, prev, *first, type);
|
||
*last = prev;
|
||
|
||
return 0;
|
||
}
|
||
|
||
/**
|
||
* Create a new ring with zero or more segments.
|
||
*
|
||
* Link each segment together into a ring.
|
||
* Set the end flag and the cycle toggle bit on the last segment.
|
||
* See section 4.9.1 and figures 15 and 16.
|
||
*/
|
||
static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
|
||
unsigned int num_segs, unsigned int cycle_state,
|
||
enum xhci_ring_type type, gfp_t flags)
|
||
{
|
||
struct xhci_ring *ring;
|
||
int ret;
|
||
|
||
ring = kzalloc(sizeof *(ring), flags);
|
||
if (!ring)
|
||
return NULL;
|
||
|
||
ring->num_segs = num_segs;
|
||
INIT_LIST_HEAD(&ring->td_list);
|
||
ring->type = type;
|
||
if (num_segs == 0)
|
||
return ring;
|
||
|
||
ret = xhci_alloc_segments_for_ring(xhci, &ring->first_seg,
|
||
&ring->last_seg, num_segs, cycle_state, type, flags);
|
||
if (ret)
|
||
goto fail;
|
||
|
||
/* Only event ring does not use link TRB */
|
||
if (type != TYPE_EVENT) {
|
||
/* See section 4.9.2.1 and 6.4.4.1 */
|
||
ring->last_seg->trbs[TRBS_PER_SEGMENT - 1].link.control |=
|
||
cpu_to_le32(LINK_TOGGLE);
|
||
}
|
||
xhci_initialize_ring_info(ring, cycle_state);
|
||
return ring;
|
||
|
||
fail:
|
||
kfree(ring);
|
||
return NULL;
|
||
}
|
||
|
||
void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci,
|
||
struct xhci_virt_device *virt_dev,
|
||
unsigned int ep_index)
|
||
{
|
||
int rings_cached;
|
||
|
||
rings_cached = virt_dev->num_rings_cached;
|
||
if (rings_cached < XHCI_MAX_RINGS_CACHED) {
|
||
virt_dev->ring_cache[rings_cached] =
|
||
virt_dev->eps[ep_index].ring;
|
||
virt_dev->num_rings_cached++;
|
||
xhci_dbg(xhci, "Cached old ring, "
|
||
"%d ring%s cached\n",
|
||
virt_dev->num_rings_cached,
|
||
(virt_dev->num_rings_cached > 1) ? "s" : "");
|
||
} else {
|
||
xhci_ring_free(xhci, virt_dev->eps[ep_index].ring);
|
||
xhci_dbg(xhci, "Ring cache full (%d rings), "
|
||
"freeing ring\n",
|
||
virt_dev->num_rings_cached);
|
||
}
|
||
virt_dev->eps[ep_index].ring = NULL;
|
||
}
|
||
|
||
/* Zero an endpoint ring (except for link TRBs) and move the enqueue and dequeue
|
||
* pointers to the beginning of the ring.
|
||
*/
|
||
static void xhci_reinit_cached_ring(struct xhci_hcd *xhci,
|
||
struct xhci_ring *ring, unsigned int cycle_state,
|
||
enum xhci_ring_type type)
|
||
{
|
||
struct xhci_segment *seg = ring->first_seg;
|
||
int i;
|
||
|
||
do {
|
||
memset(seg->trbs, 0,
|
||
sizeof(union xhci_trb)*TRBS_PER_SEGMENT);
|
||
if (cycle_state == 0) {
|
||
for (i = 0; i < TRBS_PER_SEGMENT; i++)
|
||
seg->trbs[i].link.control |= TRB_CYCLE;
|
||
}
|
||
/* All endpoint rings have link TRBs */
|
||
xhci_link_segments(xhci, seg, seg->next, type);
|
||
seg = seg->next;
|
||
} while (seg != ring->first_seg);
|
||
ring->type = type;
|
||
xhci_initialize_ring_info(ring, cycle_state);
|
||
/* td list should be empty since all URBs have been cancelled,
|
||
* but just in case...
|
||
*/
|
||
INIT_LIST_HEAD(&ring->td_list);
|
||
}
|
||
|
||
/*
|
||
* Expand an existing ring.
|
||
* Look for a cached ring or allocate a new ring which has same segment numbers
|
||
* and link the two rings.
|
||
*/
|
||
int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
|
||
unsigned int num_trbs, gfp_t flags)
|
||
{
|
||
struct xhci_segment *first;
|
||
struct xhci_segment *last;
|
||
unsigned int num_segs;
|
||
unsigned int num_segs_needed;
|
||
int ret;
|
||
|
||
num_segs_needed = (num_trbs + (TRBS_PER_SEGMENT - 1) - 1) /
|
||
(TRBS_PER_SEGMENT - 1);
|
||
|
||
/* Allocate number of segments we needed, or double the ring size */
|
||
num_segs = ring->num_segs > num_segs_needed ?
|
||
ring->num_segs : num_segs_needed;
|
||
|
||
ret = xhci_alloc_segments_for_ring(xhci, &first, &last,
|
||
num_segs, ring->cycle_state, ring->type, flags);
|
||
if (ret)
|
||
return -ENOMEM;
|
||
|
||
xhci_link_rings(xhci, ring, first, last, num_segs);
|
||
xhci_dbg(xhci, "ring expansion succeed, now has %d segments\n",
|
||
ring->num_segs);
|
||
|
||
return 0;
|
||
}
|
||
|
||
#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
|
||
|
||
static struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
|
||
int type, gfp_t flags)
|
||
{
|
||
struct xhci_container_ctx *ctx;
|
||
|
||
if ((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT))
|
||
return NULL;
|
||
|
||
ctx = kzalloc(sizeof(*ctx), flags);
|
||
if (!ctx)
|
||
return NULL;
|
||
|
||
ctx->type = type;
|
||
ctx->size = HCC_64BYTE_CONTEXT(xhci->hcc_params) ? 2048 : 1024;
|
||
if (type == XHCI_CTX_TYPE_INPUT)
|
||
ctx->size += CTX_SIZE(xhci->hcc_params);
|
||
|
||
ctx->bytes = dma_pool_alloc(xhci->device_pool, flags, &ctx->dma);
|
||
if (!ctx->bytes) {
|
||
kfree(ctx);
|
||
return NULL;
|
||
}
|
||
memset(ctx->bytes, 0, ctx->size);
|
||
return ctx;
|
||
}
|
||
|
||
static void xhci_free_container_ctx(struct xhci_hcd *xhci,
|
||
struct xhci_container_ctx *ctx)
|
||
{
|
||
if (!ctx)
|
||
return;
|
||
dma_pool_free(xhci->device_pool, ctx->bytes, ctx->dma);
|
||
kfree(ctx);
|
||
}
|
||
|
||
struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
|
||
struct xhci_container_ctx *ctx)
|
||
{
|
||
if (ctx->type != XHCI_CTX_TYPE_INPUT)
|
||
return NULL;
|
||
|
||
return (struct xhci_input_control_ctx *)ctx->bytes;
|
||
}
|
||
|
||
struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci,
|
||
struct xhci_container_ctx *ctx)
|
||
{
|
||
if (ctx->type == XHCI_CTX_TYPE_DEVICE)
|
||
return (struct xhci_slot_ctx *)ctx->bytes;
|
||
|
||
return (struct xhci_slot_ctx *)
|
||
(ctx->bytes + CTX_SIZE(xhci->hcc_params));
|
||
}
|
||
|
||
struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci,
|
||
struct xhci_container_ctx *ctx,
|
||
unsigned int ep_index)
|
||
{
|
||
/* increment ep index by offset of start of ep ctx array */
|
||
ep_index++;
|
||
if (ctx->type == XHCI_CTX_TYPE_INPUT)
|
||
ep_index++;
|
||
|
||
return (struct xhci_ep_ctx *)
|
||
(ctx->bytes + (ep_index * CTX_SIZE(xhci->hcc_params)));
|
||
}
|
||
|
||
|
||
/***************** Streams structures manipulation *************************/
|
||
|
||
static void xhci_free_stream_ctx(struct xhci_hcd *xhci,
|
||
unsigned int num_stream_ctxs,
|
||
struct xhci_stream_ctx *stream_ctx, dma_addr_t dma)
|
||
{
|
||
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
|
||
|
||
if (num_stream_ctxs > MEDIUM_STREAM_ARRAY_SIZE)
|
||
dma_free_coherent(&pdev->dev,
|
||
sizeof(struct xhci_stream_ctx)*num_stream_ctxs,
|
||
stream_ctx, dma);
|
||
else if (num_stream_ctxs <= SMALL_STREAM_ARRAY_SIZE)
|
||
return dma_pool_free(xhci->small_streams_pool,
|
||
stream_ctx, dma);
|
||
else
|
||
return dma_pool_free(xhci->medium_streams_pool,
|
||
stream_ctx, dma);
|
||
}
|
||
|
||
/*
|
||
* The stream context array for each endpoint with bulk streams enabled can
|
||
* vary in size, based on:
|
||
* - how many streams the endpoint supports,
|
||
* - the maximum primary stream array size the host controller supports,
|
||
* - and how many streams the device driver asks for.
|
||
*
|
||
* The stream context array must be a power of 2, and can be as small as
|
||
* 64 bytes or as large as 1MB.
|
||
*/
|
||
static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci,
|
||
unsigned int num_stream_ctxs, dma_addr_t *dma,
|
||
gfp_t mem_flags)
|
||
{
|
||
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
|
||
|
||
if (num_stream_ctxs > MEDIUM_STREAM_ARRAY_SIZE)
|
||
return dma_alloc_coherent(&pdev->dev,
|
||
sizeof(struct xhci_stream_ctx)*num_stream_ctxs,
|
||
dma, mem_flags);
|
||
else if (num_stream_ctxs <= SMALL_STREAM_ARRAY_SIZE)
|
||
return dma_pool_alloc(xhci->small_streams_pool,
|
||
mem_flags, dma);
|
||
else
|
||
return dma_pool_alloc(xhci->medium_streams_pool,
|
||
mem_flags, dma);
|
||
}
|
||
|
||
struct xhci_ring *xhci_dma_to_transfer_ring(
|
||
struct xhci_virt_ep *ep,
|
||
u64 address)
|
||
{
|
||
if (ep->ep_state & EP_HAS_STREAMS)
|
||
return radix_tree_lookup(&ep->stream_info->trb_address_map,
|
||
address >> TRB_SEGMENT_SHIFT);
|
||
return ep->ring;
|
||
}
|
||
|
||
/* Only use this when you know stream_info is valid */
|
||
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
|
||
static struct xhci_ring *dma_to_stream_ring(
|
||
struct xhci_stream_info *stream_info,
|
||
u64 address)
|
||
{
|
||
return radix_tree_lookup(&stream_info->trb_address_map,
|
||
address >> TRB_SEGMENT_SHIFT);
|
||
}
|
||
#endif /* CONFIG_USB_XHCI_HCD_DEBUGGING */
|
||
|
||
struct xhci_ring *xhci_stream_id_to_ring(
|
||
struct xhci_virt_device *dev,
|
||
unsigned int ep_index,
|
||
unsigned int stream_id)
|
||
{
|
||
struct xhci_virt_ep *ep = &dev->eps[ep_index];
|
||
|
||
if (stream_id == 0)
|
||
return ep->ring;
|
||
if (!ep->stream_info)
|
||
return NULL;
|
||
|
||
if (stream_id > ep->stream_info->num_streams)
|
||
return NULL;
|
||
return ep->stream_info->stream_rings[stream_id];
|
||
}
|
||
|
||
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
|
||
static int xhci_test_radix_tree(struct xhci_hcd *xhci,
|
||
unsigned int num_streams,
|
||
struct xhci_stream_info *stream_info)
|
||
{
|
||
u32 cur_stream;
|
||
struct xhci_ring *cur_ring;
|
||
u64 addr;
|
||
|
||
for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
|
||
struct xhci_ring *mapped_ring;
|
||
int trb_size = sizeof(union xhci_trb);
|
||
|
||
cur_ring = stream_info->stream_rings[cur_stream];
|
||
for (addr = cur_ring->first_seg->dma;
|
||
addr < cur_ring->first_seg->dma + TRB_SEGMENT_SIZE;
|
||
addr += trb_size) {
|
||
mapped_ring = dma_to_stream_ring(stream_info, addr);
|
||
if (cur_ring != mapped_ring) {
|
||
xhci_warn(xhci, "WARN: DMA address 0x%08llx "
|
||
"didn't map to stream ID %u; "
|
||
"mapped to ring %p\n",
|
||
(unsigned long long) addr,
|
||
cur_stream,
|
||
mapped_ring);
|
||
return -EINVAL;
|
||
}
|
||
}
|
||
/* One TRB after the end of the ring segment shouldn't return a
|
||
* pointer to the current ring (although it may be a part of a
|
||
* different ring).
|
||
*/
|
||
mapped_ring = dma_to_stream_ring(stream_info, addr);
|
||
if (mapped_ring != cur_ring) {
|
||
/* One TRB before should also fail */
|
||
addr = cur_ring->first_seg->dma - trb_size;
|
||
mapped_ring = dma_to_stream_ring(stream_info, addr);
|
||
}
|
||
if (mapped_ring == cur_ring) {
|
||
xhci_warn(xhci, "WARN: Bad DMA address 0x%08llx "
|
||
"mapped to valid stream ID %u; "
|
||
"mapped ring = %p\n",
|
||
(unsigned long long) addr,
|
||
cur_stream,
|
||
mapped_ring);
|
||
return -EINVAL;
|
||
}
|
||
}
|
||
return 0;
|
||
}
|
||
#endif /* CONFIG_USB_XHCI_HCD_DEBUGGING */
|
||
|
||
/*
|
||
* Change an endpoint's internal structure so it supports stream IDs. The
|
||
* number of requested streams includes stream 0, which cannot be used by device
|
||
* drivers.
|
||
*
|
||
* The number of stream contexts in the stream context array may be bigger than
|
||
* the number of streams the driver wants to use. This is because the number of
|
||
* stream context array entries must be a power of two.
|
||
*
|
||
* We need a radix tree for mapping physical addresses of TRBs to which stream
|
||
* ID they belong to. We need to do this because the host controller won't tell
|
||
* us which stream ring the TRB came from. We could store the stream ID in an
|
||
* event data TRB, but that doesn't help us for the cancellation case, since the
|
||
* endpoint may stop before it reaches that event data TRB.
|
||
*
|
||
* The radix tree maps the upper portion of the TRB DMA address to a ring
|
||
* segment that has the same upper portion of DMA addresses. For example, say I
|
||
* have segments of size 1KB, that are always 64-byte aligned. A segment may
|
||
* start at 0x10c91000 and end at 0x10c913f0. If I use the upper 10 bits, the
|
||
* key to the stream ID is 0x43244. I can use the DMA address of the TRB to
|
||
* pass the radix tree a key to get the right stream ID:
|
||
*
|
||
* 0x10c90fff >> 10 = 0x43243
|
||
* 0x10c912c0 >> 10 = 0x43244
|
||
* 0x10c91400 >> 10 = 0x43245
|
||
*
|
||
* Obviously, only those TRBs with DMA addresses that are within the segment
|
||
* will make the radix tree return the stream ID for that ring.
|
||
*
|
||
* Caveats for the radix tree:
|
||
*
|
||
* The radix tree uses an unsigned long as a key pair. On 32-bit systems, an
|
||
* unsigned long will be 32-bits; on a 64-bit system an unsigned long will be
|
||
* 64-bits. Since we only request 32-bit DMA addresses, we can use that as the
|
||
* key on 32-bit or 64-bit systems (it would also be fine if we asked for 64-bit
|
||
* PCI DMA addresses on a 64-bit system). There might be a problem on 32-bit
|
||
* extended systems (where the DMA address can be bigger than 32-bits),
|
||
* if we allow the PCI dma mask to be bigger than 32-bits. So don't do that.
|
||
*/
|
||
struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
|
||
unsigned int num_stream_ctxs,
|
||
unsigned int num_streams, gfp_t mem_flags)
|
||
{
|
||
struct xhci_stream_info *stream_info;
|
||
u32 cur_stream;
|
||
struct xhci_ring *cur_ring;
|
||
unsigned long key;
|
||
u64 addr;
|
||
int ret;
|
||
|
||
xhci_dbg(xhci, "Allocating %u streams and %u "
|
||
"stream context array entries.\n",
|
||
num_streams, num_stream_ctxs);
|
||
if (xhci->cmd_ring_reserved_trbs == MAX_RSVD_CMD_TRBS) {
|
||
xhci_dbg(xhci, "Command ring has no reserved TRBs available\n");
|
||
return NULL;
|
||
}
|
||
xhci->cmd_ring_reserved_trbs++;
|
||
|
||
stream_info = kzalloc(sizeof(struct xhci_stream_info), mem_flags);
|
||
if (!stream_info)
|
||
goto cleanup_trbs;
|
||
|
||
stream_info->num_streams = num_streams;
|
||
stream_info->num_stream_ctxs = num_stream_ctxs;
|
||
|
||
/* Initialize the array of virtual pointers to stream rings. */
|
||
stream_info->stream_rings = kzalloc(
|
||
sizeof(struct xhci_ring *)*num_streams,
|
||
mem_flags);
|
||
if (!stream_info->stream_rings)
|
||
goto cleanup_info;
|
||
|
||
/* Initialize the array of DMA addresses for stream rings for the HW. */
|
||
stream_info->stream_ctx_array = xhci_alloc_stream_ctx(xhci,
|
||
num_stream_ctxs, &stream_info->ctx_array_dma,
|
||
mem_flags);
|
||
if (!stream_info->stream_ctx_array)
|
||
goto cleanup_ctx;
|
||
memset(stream_info->stream_ctx_array, 0,
|
||
sizeof(struct xhci_stream_ctx)*num_stream_ctxs);
|
||
|
||
/* Allocate everything needed to free the stream rings later */
|
||
stream_info->free_streams_command =
|
||
xhci_alloc_command(xhci, true, true, mem_flags);
|
||
if (!stream_info->free_streams_command)
|
||
goto cleanup_ctx;
|
||
|
||
INIT_RADIX_TREE(&stream_info->trb_address_map, GFP_ATOMIC);
|
||
|
||
/* Allocate rings for all the streams that the driver will use,
|
||
* and add their segment DMA addresses to the radix tree.
|
||
* Stream 0 is reserved.
|
||
*/
|
||
for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
|
||
stream_info->stream_rings[cur_stream] =
|
||
xhci_ring_alloc(xhci, 2, 1, TYPE_STREAM, mem_flags);
|
||
cur_ring = stream_info->stream_rings[cur_stream];
|
||
if (!cur_ring)
|
||
goto cleanup_rings;
|
||
cur_ring->stream_id = cur_stream;
|
||
/* Set deq ptr, cycle bit, and stream context type */
|
||
addr = cur_ring->first_seg->dma |
|
||
SCT_FOR_CTX(SCT_PRI_TR) |
|
||
cur_ring->cycle_state;
|
||
stream_info->stream_ctx_array[cur_stream].stream_ring =
|
||
cpu_to_le64(addr);
|
||
xhci_dbg(xhci, "Setting stream %d ring ptr to 0x%08llx\n",
|
||
cur_stream, (unsigned long long) addr);
|
||
|
||
key = (unsigned long)
|
||
(cur_ring->first_seg->dma >> TRB_SEGMENT_SHIFT);
|
||
ret = radix_tree_insert(&stream_info->trb_address_map,
|
||
key, cur_ring);
|
||
if (ret) {
|
||
xhci_ring_free(xhci, cur_ring);
|
||
stream_info->stream_rings[cur_stream] = NULL;
|
||
goto cleanup_rings;
|
||
}
|
||
}
|
||
/* Leave the other unused stream ring pointers in the stream context
|
||
* array initialized to zero. This will cause the xHC to give us an
|
||
* error if the device asks for a stream ID we don't have setup (if it
|
||
* was any other way, the host controller would assume the ring is
|
||
* "empty" and wait forever for data to be queued to that stream ID).
|
||
*/
|
||
#if XHCI_DEBUG
|
||
/* Do a little test on the radix tree to make sure it returns the
|
||
* correct values.
|
||
*/
|
||
if (xhci_test_radix_tree(xhci, num_streams, stream_info))
|
||
goto cleanup_rings;
|
||
#endif
|
||
|
||
return stream_info;
|
||
|
||
cleanup_rings:
|
||
for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
|
||
cur_ring = stream_info->stream_rings[cur_stream];
|
||
if (cur_ring) {
|
||
addr = cur_ring->first_seg->dma;
|
||
radix_tree_delete(&stream_info->trb_address_map,
|
||
addr >> TRB_SEGMENT_SHIFT);
|
||
xhci_ring_free(xhci, cur_ring);
|
||
stream_info->stream_rings[cur_stream] = NULL;
|
||
}
|
||
}
|
||
xhci_free_command(xhci, stream_info->free_streams_command);
|
||
cleanup_ctx:
|
||
kfree(stream_info->stream_rings);
|
||
cleanup_info:
|
||
kfree(stream_info);
|
||
cleanup_trbs:
|
||
xhci->cmd_ring_reserved_trbs--;
|
||
return NULL;
|
||
}
|
||
/*
|
||
* Sets the MaxPStreams field and the Linear Stream Array field.
|
||
* Sets the dequeue pointer to the stream context array.
|
||
*/
|
||
void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
|
||
struct xhci_ep_ctx *ep_ctx,
|
||
struct xhci_stream_info *stream_info)
|
||
{
|
||
u32 max_primary_streams;
|
||
/* MaxPStreams is the number of stream context array entries, not the
|
||
* number we're actually using. Must be in 2^(MaxPstreams + 1) format.
|
||
* fls(0) = 0, fls(0x1) = 1, fls(0x10) = 2, fls(0x100) = 3, etc.
|
||
*/
|
||
max_primary_streams = fls(stream_info->num_stream_ctxs) - 2;
|
||
xhci_dbg(xhci, "Setting number of stream ctx array entries to %u\n",
|
||
1 << (max_primary_streams + 1));
|
||
ep_ctx->ep_info &= cpu_to_le32(~EP_MAXPSTREAMS_MASK);
|
||
ep_ctx->ep_info |= cpu_to_le32(EP_MAXPSTREAMS(max_primary_streams)
|
||
| EP_HAS_LSA);
|
||
ep_ctx->deq = cpu_to_le64(stream_info->ctx_array_dma);
|
||
}
|
||
|
||
/*
|
||
* Sets the MaxPStreams field and the Linear Stream Array field to 0.
|
||
* Reinstalls the "normal" endpoint ring (at its previous dequeue mark,
|
||
* not at the beginning of the ring).
|
||
*/
|
||
void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci,
|
||
struct xhci_ep_ctx *ep_ctx,
|
||
struct xhci_virt_ep *ep)
|
||
{
|
||
dma_addr_t addr;
|
||
ep_ctx->ep_info &= cpu_to_le32(~(EP_MAXPSTREAMS_MASK | EP_HAS_LSA));
|
||
addr = xhci_trb_virt_to_dma(ep->ring->deq_seg, ep->ring->dequeue);
|
||
ep_ctx->deq = cpu_to_le64(addr | ep->ring->cycle_state);
|
||
}
|
||
|
||
/* Frees all stream contexts associated with the endpoint,
|
||
*
|
||
* Caller should fix the endpoint context streams fields.
|
||
*/
|
||
void xhci_free_stream_info(struct xhci_hcd *xhci,
|
||
struct xhci_stream_info *stream_info)
|
||
{
|
||
int cur_stream;
|
||
struct xhci_ring *cur_ring;
|
||
dma_addr_t addr;
|
||
|
||
if (!stream_info)
|
||
return;
|
||
|
||
for (cur_stream = 1; cur_stream < stream_info->num_streams;
|
||
cur_stream++) {
|
||
cur_ring = stream_info->stream_rings[cur_stream];
|
||
if (cur_ring) {
|
||
addr = cur_ring->first_seg->dma;
|
||
radix_tree_delete(&stream_info->trb_address_map,
|
||
addr >> TRB_SEGMENT_SHIFT);
|
||
xhci_ring_free(xhci, cur_ring);
|
||
stream_info->stream_rings[cur_stream] = NULL;
|
||
}
|
||
}
|
||
xhci_free_command(xhci, stream_info->free_streams_command);
|
||
xhci->cmd_ring_reserved_trbs--;
|
||
if (stream_info->stream_ctx_array)
|
||
xhci_free_stream_ctx(xhci,
|
||
stream_info->num_stream_ctxs,
|
||
stream_info->stream_ctx_array,
|
||
stream_info->ctx_array_dma);
|
||
|
||
if (stream_info)
|
||
kfree(stream_info->stream_rings);
|
||
kfree(stream_info);
|
||
}
|
||
|
||
|
||
/***************** Device context manipulation *************************/
|
||
|
||
static void xhci_init_endpoint_timer(struct xhci_hcd *xhci,
|
||
struct xhci_virt_ep *ep)
|
||
{
|
||
init_timer(&ep->stop_cmd_timer);
|
||
ep->stop_cmd_timer.data = (unsigned long) ep;
|
||
ep->stop_cmd_timer.function = xhci_stop_endpoint_command_watchdog;
|
||
ep->xhci = xhci;
|
||
}
|
||
|
||
static void xhci_free_tt_info(struct xhci_hcd *xhci,
|
||
struct xhci_virt_device *virt_dev,
|
||
int slot_id)
|
||
{
|
||
struct list_head *tt_list_head;
|
||
struct xhci_tt_bw_info *tt_info, *next;
|
||
bool slot_found = false;
|
||
|
||
/* If the device never made it past the Set Address stage,
|
||
* it may not have the real_port set correctly.
|
||
*/
|
||
if (virt_dev->real_port == 0 ||
|
||
virt_dev->real_port > HCS_MAX_PORTS(xhci->hcs_params1)) {
|
||
xhci_dbg(xhci, "Bad real port.\n");
|
||
return;
|
||
}
|
||
|
||
tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts);
|
||
list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
|
||
/* Multi-TT hubs will have more than one entry */
|
||
if (tt_info->slot_id == slot_id) {
|
||
slot_found = true;
|
||
list_del(&tt_info->tt_list);
|
||
kfree(tt_info);
|
||
} else if (slot_found) {
|
||
break;
|
||
}
|
||
}
|
||
}
|
||
|
||
int xhci_alloc_tt_info(struct xhci_hcd *xhci,
|
||
struct xhci_virt_device *virt_dev,
|
||
struct usb_device *hdev,
|
||
struct usb_tt *tt, gfp_t mem_flags)
|
||
{
|
||
struct xhci_tt_bw_info *tt_info;
|
||
unsigned int num_ports;
|
||
int i, j;
|
||
|
||
if (!tt->multi)
|
||
num_ports = 1;
|
||
else
|
||
num_ports = hdev->maxchild;
|
||
|
||
for (i = 0; i < num_ports; i++, tt_info++) {
|
||
struct xhci_interval_bw_table *bw_table;
|
||
|
||
tt_info = kzalloc(sizeof(*tt_info), mem_flags);
|
||
if (!tt_info)
|
||
goto free_tts;
|
||
INIT_LIST_HEAD(&tt_info->tt_list);
|
||
list_add(&tt_info->tt_list,
|
||
&xhci->rh_bw[virt_dev->real_port - 1].tts);
|
||
tt_info->slot_id = virt_dev->udev->slot_id;
|
||
if (tt->multi)
|
||
tt_info->ttport = i+1;
|
||
bw_table = &tt_info->bw_table;
|
||
for (j = 0; j < XHCI_MAX_INTERVAL; j++)
|
||
INIT_LIST_HEAD(&bw_table->interval_bw[j].endpoints);
|
||
}
|
||
return 0;
|
||
|
||
free_tts:
|
||
xhci_free_tt_info(xhci, virt_dev, virt_dev->udev->slot_id);
|
||
return -ENOMEM;
|
||
}
|
||
|
||
|
||
/* All the xhci_tds in the ring's TD list should be freed at this point.
|
||
* Should be called with xhci->lock held if there is any chance the TT lists
|
||
* will be manipulated by the configure endpoint, allocate device, or update
|
||
* hub functions while this function is removing the TT entries from the list.
|
||
*/
|
||
void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
|
||
{
|
||
struct xhci_virt_device *dev;
|
||
int i;
|
||
int old_active_eps = 0;
|
||
|
||
/* Slot ID 0 is reserved */
|
||
if (slot_id == 0 || !xhci->devs[slot_id])
|
||
return;
|
||
|
||
dev = xhci->devs[slot_id];
|
||
xhci->dcbaa->dev_context_ptrs[slot_id] = 0;
|
||
if (!dev)
|
||
return;
|
||
|
||
if (dev->tt_info)
|
||
old_active_eps = dev->tt_info->active_eps;
|
||
|
||
for (i = 0; i < 31; ++i) {
|
||
if (dev->eps[i].ring)
|
||
xhci_ring_free(xhci, dev->eps[i].ring);
|
||
if (dev->eps[i].stream_info)
|
||
xhci_free_stream_info(xhci,
|
||
dev->eps[i].stream_info);
|
||
/* Endpoints on the TT/root port lists should have been removed
|
||
* when usb_disable_device() was called for the device.
|
||
* We can't drop them anyway, because the udev might have gone
|
||
* away by this point, and we can't tell what speed it was.
|
||
*/
|
||
if (!list_empty(&dev->eps[i].bw_endpoint_list))
|
||
xhci_warn(xhci, "Slot %u endpoint %u "
|
||
"not removed from BW list!\n",
|
||
slot_id, i);
|
||
}
|
||
/* If this is a hub, free the TT(s) from the TT list */
|
||
xhci_free_tt_info(xhci, dev, slot_id);
|
||
/* If necessary, update the number of active TTs on this root port */
|
||
xhci_update_tt_active_eps(xhci, dev, old_active_eps);
|
||
|
||
if (dev->ring_cache) {
|
||
for (i = 0; i < dev->num_rings_cached; i++)
|
||
xhci_ring_free(xhci, dev->ring_cache[i]);
|
||
kfree(dev->ring_cache);
|
||
}
|
||
|
||
if (dev->in_ctx)
|
||
xhci_free_container_ctx(xhci, dev->in_ctx);
|
||
if (dev->out_ctx)
|
||
xhci_free_container_ctx(xhci, dev->out_ctx);
|
||
|
||
kfree(xhci->devs[slot_id]);
|
||
xhci->devs[slot_id] = NULL;
|
||
}
|
||
|
||
int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
|
||
struct usb_device *udev, gfp_t flags)
|
||
{
|
||
struct xhci_virt_device *dev;
|
||
int i;
|
||
|
||
/* Slot ID 0 is reserved */
|
||
if (slot_id == 0 || xhci->devs[slot_id]) {
|
||
xhci_warn(xhci, "Bad Slot ID %d\n", slot_id);
|
||
return 0;
|
||
}
|
||
|
||
xhci->devs[slot_id] = kzalloc(sizeof(*xhci->devs[slot_id]), flags);
|
||
if (!xhci->devs[slot_id])
|
||
return 0;
|
||
dev = xhci->devs[slot_id];
|
||
|
||
/* Allocate the (output) device context that will be used in the HC. */
|
||
dev->out_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_DEVICE, flags);
|
||
if (!dev->out_ctx)
|
||
goto fail;
|
||
|
||
xhci_dbg(xhci, "Slot %d output ctx = 0x%llx (dma)\n", slot_id,
|
||
(unsigned long long)dev->out_ctx->dma);
|
||
|
||
/* Allocate the (input) device context for address device command */
|
||
dev->in_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, flags);
|
||
if (!dev->in_ctx)
|
||
goto fail;
|
||
|
||
xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id,
|
||
(unsigned long long)dev->in_ctx->dma);
|
||
|
||
/* Initialize the cancellation list and watchdog timers for each ep */
|
||
for (i = 0; i < 31; i++) {
|
||
xhci_init_endpoint_timer(xhci, &dev->eps[i]);
|
||
INIT_LIST_HEAD(&dev->eps[i].cancelled_td_list);
|
||
INIT_LIST_HEAD(&dev->eps[i].bw_endpoint_list);
|
||
}
|
||
|
||
/* Allocate endpoint 0 ring */
|
||
dev->eps[0].ring = xhci_ring_alloc(xhci, 2, 1, TYPE_CTRL, flags);
|
||
if (!dev->eps[0].ring)
|
||
goto fail;
|
||
|
||
/* Allocate pointers to the ring cache */
|
||
dev->ring_cache = kzalloc(
|
||
sizeof(struct xhci_ring *)*XHCI_MAX_RINGS_CACHED,
|
||
flags);
|
||
if (!dev->ring_cache)
|
||
goto fail;
|
||
dev->num_rings_cached = 0;
|
||
|
||
init_completion(&dev->cmd_completion);
|
||
INIT_LIST_HEAD(&dev->cmd_list);
|
||
dev->udev = udev;
|
||
|
||
/* Point to output device context in dcbaa. */
|
||
xhci->dcbaa->dev_context_ptrs[slot_id] = cpu_to_le64(dev->out_ctx->dma);
|
||
xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n",
|
||
slot_id,
|
||
&xhci->dcbaa->dev_context_ptrs[slot_id],
|
||
le64_to_cpu(xhci->dcbaa->dev_context_ptrs[slot_id]));
|
||
|
||
return 1;
|
||
fail:
|
||
xhci_free_virt_device(xhci, slot_id);
|
||
return 0;
|
||
}
|
||
|
||
void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
|
||
struct usb_device *udev)
|
||
{
|
||
struct xhci_virt_device *virt_dev;
|
||
struct xhci_ep_ctx *ep0_ctx;
|
||
struct xhci_ring *ep_ring;
|
||
|
||
virt_dev = xhci->devs[udev->slot_id];
|
||
ep0_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, 0);
|
||
ep_ring = virt_dev->eps[0].ring;
|
||
/*
|
||
* FIXME we don't keep track of the dequeue pointer very well after a
|
||
* Set TR dequeue pointer, so we're setting the dequeue pointer of the
|
||
* host to our enqueue pointer. This should only be called after a
|
||
* configured device has reset, so all control transfers should have
|
||
* been completed or cancelled before the reset.
|
||
*/
|
||
ep0_ctx->deq = cpu_to_le64(xhci_trb_virt_to_dma(ep_ring->enq_seg,
|
||
ep_ring->enqueue)
|
||
| ep_ring->cycle_state);
|
||
}
|
||
|
||
/*
|
||
* The xHCI roothub may have ports of differing speeds in any order in the port
|
||
* status registers. xhci->port_array provides an array of the port speed for
|
||
* each offset into the port status registers.
|
||
*
|
||
* The xHCI hardware wants to know the roothub port number that the USB device
|
||
* is attached to (or the roothub port its ancestor hub is attached to). All we
|
||
* know is the index of that port under either the USB 2.0 or the USB 3.0
|
||
* roothub, but that doesn't give us the real index into the HW port status
|
||
* registers. Call xhci_find_raw_port_number() to get real index.
|
||
*/
|
||
static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
|
||
struct usb_device *udev)
|
||
{
|
||
struct usb_device *top_dev;
|
||
struct usb_hcd *hcd;
|
||
|
||
if (udev->speed == USB_SPEED_SUPER)
|
||
hcd = xhci->shared_hcd;
|
||
else
|
||
hcd = xhci->main_hcd;
|
||
|
||
for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
|
||
top_dev = top_dev->parent)
|
||
/* Found device below root hub */;
|
||
|
||
return xhci_find_raw_port_number(hcd, top_dev->portnum);
|
||
}
|
||
|
||
/* Setup an xHCI virtual device for a Set Address command */
|
||
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
|
||
{
|
||
struct xhci_virt_device *dev;
|
||
struct xhci_ep_ctx *ep0_ctx;
|
||
struct xhci_slot_ctx *slot_ctx;
|
||
u32 port_num;
|
||
u32 max_packets;
|
||
struct usb_device *top_dev;
|
||
|
||
dev = xhci->devs[udev->slot_id];
|
||
/* Slot ID 0 is reserved */
|
||
if (udev->slot_id == 0 || !dev) {
|
||
xhci_warn(xhci, "Slot ID %d is not assigned to this device\n",
|
||
udev->slot_id);
|
||
return -EINVAL;
|
||
}
|
||
ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0);
|
||
slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx);
|
||
|
||
/* 3) Only the control endpoint is valid - one endpoint context */
|
||
slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | udev->route);
|
||
switch (udev->speed) {
|
||
case USB_SPEED_SUPER:
|
||
slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SS);
|
||
max_packets = MAX_PACKET(512);
|
||
break;
|
||
case USB_SPEED_HIGH:
|
||
slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_HS);
|
||
max_packets = MAX_PACKET(64);
|
||
break;
|
||
/* USB core guesses at a 64-byte max packet first for FS devices */
|
||
case USB_SPEED_FULL:
|
||
slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_FS);
|
||
max_packets = MAX_PACKET(64);
|
||
break;
|
||
case USB_SPEED_LOW:
|
||
slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_LS);
|
||
max_packets = MAX_PACKET(8);
|
||
break;
|
||
case USB_SPEED_WIRELESS:
|
||
xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
|
||
return -EINVAL;
|
||
break;
|
||
default:
|
||
/* Speed was set earlier, this shouldn't happen. */
|
||
return -EINVAL;
|
||
}
|
||
/* Find the root hub port this device is under */
|
||
port_num = xhci_find_real_port_number(xhci, udev);
|
||
if (!port_num)
|
||
return -EINVAL;
|
||
slot_ctx->dev_info2 |= cpu_to_le32(ROOT_HUB_PORT(port_num));
|
||
/* Set the port number in the virtual_device to the faked port number */
|
||
for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
|
||
top_dev = top_dev->parent)
|
||
/* Found device below root hub */;
|
||
dev->fake_port = top_dev->portnum;
|
||
dev->real_port = port_num;
|
||
xhci_dbg(xhci, "Set root hub portnum to %d\n", port_num);
|
||
xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->fake_port);
|
||
|
||
/* Find the right bandwidth table that this device will be a part of.
|
||
* If this is a full speed device attached directly to a root port (or a
|
||
* decendent of one), it counts as a primary bandwidth domain, not a
|
||
* secondary bandwidth domain under a TT. An xhci_tt_info structure
|
||
* will never be created for the HS root hub.
|
||
*/
|
||
if (!udev->tt || !udev->tt->hub->parent) {
|
||
dev->bw_table = &xhci->rh_bw[port_num - 1].bw_table;
|
||
} else {
|
||
struct xhci_root_port_bw_info *rh_bw;
|
||
struct xhci_tt_bw_info *tt_bw;
|
||
|
||
rh_bw = &xhci->rh_bw[port_num - 1];
|
||
/* Find the right TT. */
|
||
list_for_each_entry(tt_bw, &rh_bw->tts, tt_list) {
|
||
if (tt_bw->slot_id != udev->tt->hub->slot_id)
|
||
continue;
|
||
|
||
if (!dev->udev->tt->multi ||
|
||
(udev->tt->multi &&
|
||
tt_bw->ttport == dev->udev->ttport)) {
|
||
dev->bw_table = &tt_bw->bw_table;
|
||
dev->tt_info = tt_bw;
|
||
break;
|
||
}
|
||
}
|
||
if (!dev->tt_info)
|
||
xhci_warn(xhci, "WARN: Didn't find a matching TT\n");
|
||
}
|
||
|
||
/* Is this a LS/FS device under an external HS hub? */
|
||
if (udev->tt && udev->tt->hub->parent) {
|
||
slot_ctx->tt_info = cpu_to_le32(udev->tt->hub->slot_id |
|
||
(udev->ttport << 8));
|
||
if (udev->tt->multi)
|
||
slot_ctx->dev_info |= cpu_to_le32(DEV_MTT);
|
||
}
|
||
xhci_dbg(xhci, "udev->tt = %p\n", udev->tt);
|
||
xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);
|
||
|
||
/* Step 4 - ring already allocated */
|
||
/* Step 5 */
|
||
ep0_ctx->ep_info2 = cpu_to_le32(EP_TYPE(CTRL_EP));
|
||
|
||
/* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
|
||
ep0_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(0) | ERROR_COUNT(3) |
|
||
max_packets);
|
||
|
||
ep0_ctx->deq = cpu_to_le64(dev->eps[0].ring->first_seg->dma |
|
||
dev->eps[0].ring->cycle_state);
|
||
|
||
/* Steps 7 and 8 were done in xhci_alloc_virt_device() */
|
||
|
||
return 0;
|
||
}
|
||
|
||
/*
|
||
* Convert interval expressed as 2^(bInterval - 1) == interval into
|
||
* straight exponent value 2^n == interval.
|
||
*
|
||
*/
|
||
static unsigned int xhci_parse_exponent_interval(struct usb_device *udev,
|
||
struct usb_host_endpoint *ep)
|
||
{
|
||
unsigned int interval;
|
||
|
||
interval = clamp_val(ep->desc.bInterval, 1, 16) - 1;
|
||
if (interval != ep->desc.bInterval - 1)
|
||
dev_warn(&udev->dev,
|
||
"ep %#x - rounding interval to %d %sframes\n",
|
||
ep->desc.bEndpointAddress,
|
||
1 << interval,
|
||
udev->speed == USB_SPEED_FULL ? "" : "micro");
|
||
|
||
if (udev->speed == USB_SPEED_FULL) {
|
||
/*
|
||
* Full speed isoc endpoints specify interval in frames,
|
||
* not microframes. We are using microframes everywhere,
|
||
* so adjust accordingly.
|
||
*/
|
||
interval += 3; /* 1 frame = 2^3 uframes */
|
||
}
|
||
|
||
return interval;
|
||
}
|
||
|
||
/*
|
||
* Convert bInterval expressed in microframes (in 1-255 range) to exponent of
|
||
* microframes, rounded down to nearest power of 2.
|
||
*/
|
||
static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
|
||
struct usb_host_endpoint *ep, unsigned int desc_interval,
|
||
unsigned int min_exponent, unsigned int max_exponent)
|
||
{
|
||
unsigned int interval;
|
||
|
||
interval = fls(desc_interval) - 1;
|
||
interval = clamp_val(interval, min_exponent, max_exponent);
|
||
if ((1 << interval) != desc_interval)
|
||
dev_warn(&udev->dev,
|
||
"ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
|
||
ep->desc.bEndpointAddress,
|
||
1 << interval,
|
||
desc_interval);
|
||
|
||
return interval;
|
||
}
|
||
|
||
static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
|
||
struct usb_host_endpoint *ep)
|
||
{
|
||
if (ep->desc.bInterval == 0)
|
||
return 0;
|
||
return xhci_microframes_to_exponent(udev, ep,
|
||
ep->desc.bInterval, 0, 15);
|
||
}
|
||
|
||
|
||
static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
|
||
struct usb_host_endpoint *ep)
|
||
{
|
||
return xhci_microframes_to_exponent(udev, ep,
|
||
ep->desc.bInterval * 8, 3, 10);
|
||
}
|
||
|
||
/* Return the polling or NAK interval.
|
||
*
|
||
* The polling interval is expressed in "microframes". If xHCI's Interval field
|
||
* is set to N, it will service the endpoint every 2^(Interval)*125us.
|
||
*
|
||
* The NAK interval is one NAK per 1 to 255 microframes, or no NAKs if interval
|
||
* is set to 0.
|
||
*/
|
||
static unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
|
||
struct usb_host_endpoint *ep)
|
||
{
|
||
unsigned int interval = 0;
|
||
|
||
switch (udev->speed) {
|
||
case USB_SPEED_HIGH:
|
||
/* Max NAK rate */
|
||
if (usb_endpoint_xfer_control(&ep->desc) ||
|
||
usb_endpoint_xfer_bulk(&ep->desc)) {
|
||
interval = xhci_parse_microframe_interval(udev, ep);
|
||
break;
|
||
}
|
||
/* Fall through - SS and HS isoc/int have same decoding */
|
||
|
||
case USB_SPEED_SUPER:
|
||
if (usb_endpoint_xfer_int(&ep->desc) ||
|
||
usb_endpoint_xfer_isoc(&ep->desc)) {
|
||
interval = xhci_parse_exponent_interval(udev, ep);
|
||
}
|
||
break;
|
||
|
||
case USB_SPEED_FULL:
|
||
if (usb_endpoint_xfer_isoc(&ep->desc)) {
|
||
interval = xhci_parse_exponent_interval(udev, ep);
|
||
break;
|
||
}
|
||
/*
|
||
* Fall through for interrupt endpoint interval decoding
|
||
* since it uses the same rules as low speed interrupt
|
||
* endpoints.
|
||
*/
|
||
|
||
case USB_SPEED_LOW:
|
||
if (usb_endpoint_xfer_int(&ep->desc) ||
|
||
usb_endpoint_xfer_isoc(&ep->desc)) {
|
||
|
||
interval = xhci_parse_frame_interval(udev, ep);
|
||
}
|
||
break;
|
||
|
||
default:
|
||
BUG();
|
||
}
|
||
return EP_INTERVAL(interval);
|
||
}
|
||
|
||
/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
|
||
* High speed endpoint descriptors can define "the number of additional
|
||
* transaction opportunities per microframe", but that goes in the Max Burst
|
||
* endpoint context field.
|
||
*/
|
||
static u32 xhci_get_endpoint_mult(struct usb_device *udev,
|
||
struct usb_host_endpoint *ep)
|
||
{
|
||
if (udev->speed != USB_SPEED_SUPER ||
|
||
!usb_endpoint_xfer_isoc(&ep->desc))
|
||
return 0;
|
||
return ep->ss_ep_comp.bmAttributes;
|
||
}
|
||
|
||
static u32 xhci_get_endpoint_type(struct usb_device *udev,
|
||
struct usb_host_endpoint *ep)
|
||
{
|
||
int in;
|
||
u32 type;
|
||
|
||
in = usb_endpoint_dir_in(&ep->desc);
|
||
if (usb_endpoint_xfer_control(&ep->desc)) {
|
||
type = EP_TYPE(CTRL_EP);
|
||
} else if (usb_endpoint_xfer_bulk(&ep->desc)) {
|
||
if (in)
|
||
type = EP_TYPE(BULK_IN_EP);
|
||
else
|
||
type = EP_TYPE(BULK_OUT_EP);
|
||
} else if (usb_endpoint_xfer_isoc(&ep->desc)) {
|
||
if (in)
|
||
type = EP_TYPE(ISOC_IN_EP);
|
||
else
|
||
type = EP_TYPE(ISOC_OUT_EP);
|
||
} else if (usb_endpoint_xfer_int(&ep->desc)) {
|
||
if (in)
|
||
type = EP_TYPE(INT_IN_EP);
|
||
else
|
||
type = EP_TYPE(INT_OUT_EP);
|
||
} else {
|
||
type = 0;
|
||
}
|
||
return type;
|
||
}
|
||
|
||
/* Return the maximum endpoint service interval time (ESIT) payload.
|
||
* Basically, this is the maxpacket size, multiplied by the burst size
|
||
* and mult size.
|
||
*/
|
||
static u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
|
||
struct usb_device *udev,
|
||
struct usb_host_endpoint *ep)
|
||
{
|
||
int max_burst;
|
||
int max_packet;
|
||
|
||
/* Only applies for interrupt or isochronous endpoints */
|
||
if (usb_endpoint_xfer_control(&ep->desc) ||
|
||
usb_endpoint_xfer_bulk(&ep->desc))
|
||
return 0;
|
||
|
||
if (udev->speed == USB_SPEED_SUPER)
|
||
return le16_to_cpu(ep->ss_ep_comp.wBytesPerInterval);
|
||
|
||
max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
|
||
max_burst = (usb_endpoint_maxp(&ep->desc) & 0x1800) >> 11;
|
||
/* A 0 in max burst means 1 transfer per ESIT */
|
||
return max_packet * (max_burst + 1);
|
||
}
|
||
|
||
/* Set up an endpoint with one ring segment. Do not allocate stream rings.
|
||
* Drivers will have to call usb_alloc_streams() to do that.
|
||
*/
|
||
int xhci_endpoint_init(struct xhci_hcd *xhci,
|
||
struct xhci_virt_device *virt_dev,
|
||
struct usb_device *udev,
|
||
struct usb_host_endpoint *ep,
|
||
gfp_t mem_flags)
|
||
{
|
||
unsigned int ep_index;
|
||
struct xhci_ep_ctx *ep_ctx;
|
||
struct xhci_ring *ep_ring;
|
||
unsigned int max_packet;
|
||
unsigned int max_burst;
|
||
enum xhci_ring_type type;
|
||
u32 max_esit_payload;
|
||
u32 endpoint_type;
|
||
|
||
ep_index = xhci_get_endpoint_index(&ep->desc);
|
||
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
|
||
|
||
endpoint_type = xhci_get_endpoint_type(udev, ep);
|
||
if (!endpoint_type)
|
||
return -EINVAL;
|
||
ep_ctx->ep_info2 = cpu_to_le32(endpoint_type);
|
||
|
||
type = usb_endpoint_type(&ep->desc);
|
||
/* Set up the endpoint ring */
|
||
virt_dev->eps[ep_index].new_ring =
|
||
xhci_ring_alloc(xhci, 2, 1, type, mem_flags);
|
||
if (!virt_dev->eps[ep_index].new_ring) {
|
||
/* Attempt to use the ring cache */
|
||
if (virt_dev->num_rings_cached == 0)
|
||
return -ENOMEM;
|
||
virt_dev->eps[ep_index].new_ring =
|
||
virt_dev->ring_cache[virt_dev->num_rings_cached];
|
||
virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
|
||
virt_dev->num_rings_cached--;
|
||
xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring,
|
||
1, type);
|
||
}
|
||
virt_dev->eps[ep_index].skip = false;
|
||
ep_ring = virt_dev->eps[ep_index].new_ring;
|
||
ep_ctx->deq = cpu_to_le64(ep_ring->first_seg->dma | ep_ring->cycle_state);
|
||
|
||
ep_ctx->ep_info = cpu_to_le32(xhci_get_endpoint_interval(udev, ep)
|
||
| EP_MULT(xhci_get_endpoint_mult(udev, ep)));
|
||
|
||
/* FIXME dig Mult and streams info out of ep companion desc */
|
||
|
||
/* Allow 3 retries for everything but isoc;
|
||
* CErr shall be set to 0 for Isoch endpoints.
|
||
*/
|
||
if (!usb_endpoint_xfer_isoc(&ep->desc))
|
||
ep_ctx->ep_info2 |= cpu_to_le32(ERROR_COUNT(3));
|
||
else
|
||
ep_ctx->ep_info2 |= cpu_to_le32(ERROR_COUNT(0));
|
||
|
||
/* Set the max packet size and max burst */
|
||
max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
|
||
max_burst = 0;
|
||
switch (udev->speed) {
|
||
case USB_SPEED_SUPER:
|
||
/* dig out max burst from ep companion desc */
|
||
max_burst = ep->ss_ep_comp.bMaxBurst;
|
||
break;
|
||
case USB_SPEED_HIGH:
|
||
/* Some devices get this wrong */
|
||
if (usb_endpoint_xfer_bulk(&ep->desc))
|
||
max_packet = 512;
|
||
/* bits 11:12 specify the number of additional transaction
|
||
* opportunities per microframe (USB 2.0, section 9.6.6)
|
||
*/
|
||
if (usb_endpoint_xfer_isoc(&ep->desc) ||
|
||
usb_endpoint_xfer_int(&ep->desc)) {
|
||
max_burst = (usb_endpoint_maxp(&ep->desc)
|
||
& 0x1800) >> 11;
|
||
}
|
||
break;
|
||
case USB_SPEED_FULL:
|
||
case USB_SPEED_LOW:
|
||
break;
|
||
default:
|
||
BUG();
|
||
}
|
||
ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet) |
|
||
MAX_BURST(max_burst));
|
||
max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep);
|
||
ep_ctx->tx_info = cpu_to_le32(MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload));
|
||
|
||
/*
|
||
* XXX no idea how to calculate the average TRB buffer length for bulk
|
||
* endpoints, as the driver gives us no clue how big each scatter gather
|
||
* list entry (or buffer) is going to be.
|
||
*
|
||
* For isochronous and interrupt endpoints, we set it to the max
|
||
* available, until we have new API in the USB core to allow drivers to
|
||
* declare how much bandwidth they actually need.
|
||
*
|
||
* Normally, it would be calculated by taking the total of the buffer
|
||
* lengths in the TD and then dividing by the number of TRBs in a TD,
|
||
* including link TRBs, No-op TRBs, and Event data TRBs. Since we don't
|
||
* use Event Data TRBs, and we don't chain in a link TRB on short
|
||
* transfers, we're basically dividing by 1.
|
||
*
|
||
* xHCI 1.0 specification indicates that the Average TRB Length should
|
||
* be set to 8 for control endpoints.
|
||
*/
|
||
if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version == 0x100)
|
||
ep_ctx->tx_info |= cpu_to_le32(AVG_TRB_LENGTH_FOR_EP(8));
|
||
else
|
||
ep_ctx->tx_info |=
|
||
cpu_to_le32(AVG_TRB_LENGTH_FOR_EP(max_esit_payload));
|
||
|
||
/* FIXME Debug endpoint context */
|
||
return 0;
|
||
}
|
||
|
||
void xhci_endpoint_zero(struct xhci_hcd *xhci,
|
||
struct xhci_virt_device *virt_dev,
|
||
struct usb_host_endpoint *ep)
|
||
{
|
||
unsigned int ep_index;
|
||
struct xhci_ep_ctx *ep_ctx;
|
||
|
||
ep_index = xhci_get_endpoint_index(&ep->desc);
|
||
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
|
||
|
||
ep_ctx->ep_info = 0;
|
||
ep_ctx->ep_info2 = 0;
|
||
ep_ctx->deq = 0;
|
||
ep_ctx->tx_info = 0;
|
||
/* Don't free the endpoint ring until the set interface or configuration
|
||
* request succeeds.
|
||
*/
|
||
}
|
||
|
||
void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info)
|
||
{
|
||
bw_info->ep_interval = 0;
|
||
bw_info->mult = 0;
|
||
bw_info->num_packets = 0;
|
||
bw_info->max_packet_size = 0;
|
||
bw_info->type = 0;
|
||
bw_info->max_esit_payload = 0;
|
||
}
|
||
|
||
void xhci_update_bw_info(struct xhci_hcd *xhci,
|
||
struct xhci_container_ctx *in_ctx,
|
||
struct xhci_input_control_ctx *ctrl_ctx,
|
||
struct xhci_virt_device *virt_dev)
|
||
{
|
||
struct xhci_bw_info *bw_info;
|
||
struct xhci_ep_ctx *ep_ctx;
|
||
unsigned int ep_type;
|
||
int i;
|
||
|
||
for (i = 1; i < 31; ++i) {
|
||
bw_info = &virt_dev->eps[i].bw_info;
|
||
|
||
/* We can't tell what endpoint type is being dropped, but
|
||
* unconditionally clearing the bandwidth info for non-periodic
|
||
* endpoints should be harmless because the info will never be
|
||
* set in the first place.
|
||
*/
|
||
if (!EP_IS_ADDED(ctrl_ctx, i) && EP_IS_DROPPED(ctrl_ctx, i)) {
|
||
/* Dropped endpoint */
|
||
xhci_clear_endpoint_bw_info(bw_info);
|
||
continue;
|
||
}
|
||
|
||
if (EP_IS_ADDED(ctrl_ctx, i)) {
|
||
ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, i);
|
||
ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2));
|
||
|
||
/* Ignore non-periodic endpoints */
|
||
if (ep_type != ISOC_OUT_EP && ep_type != INT_OUT_EP &&
|
||
ep_type != ISOC_IN_EP &&
|
||
ep_type != INT_IN_EP)
|
||
continue;
|
||
|
||
/* Added or changed endpoint */
|
||
bw_info->ep_interval = CTX_TO_EP_INTERVAL(
|
||
le32_to_cpu(ep_ctx->ep_info));
|
||
/* Number of packets and mult are zero-based in the
|
||
* input context, but we want one-based for the
|
||
* interval table.
|
||
*/
|
||
bw_info->mult = CTX_TO_EP_MULT(
|
||
le32_to_cpu(ep_ctx->ep_info)) + 1;
|
||
bw_info->num_packets = CTX_TO_MAX_BURST(
|
||
le32_to_cpu(ep_ctx->ep_info2)) + 1;
|
||
bw_info->max_packet_size = MAX_PACKET_DECODED(
|
||
le32_to_cpu(ep_ctx->ep_info2));
|
||
bw_info->type = ep_type;
|
||
bw_info->max_esit_payload = CTX_TO_MAX_ESIT_PAYLOAD(
|
||
le32_to_cpu(ep_ctx->tx_info));
|
||
}
|
||
}
|
||
}
|
||
|
||
/* Copy output xhci_ep_ctx to the input xhci_ep_ctx copy.
|
||
* Useful when you want to change one particular aspect of the endpoint and then
|
||
* issue a configure endpoint command.
|
||
*/
|
||
void xhci_endpoint_copy(struct xhci_hcd *xhci,
|
||
struct xhci_container_ctx *in_ctx,
|
||
struct xhci_container_ctx *out_ctx,
|
||
unsigned int ep_index)
|
||
{
|
||
struct xhci_ep_ctx *out_ep_ctx;
|
||
struct xhci_ep_ctx *in_ep_ctx;
|
||
|
||
out_ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
|
||
in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
|
||
|
||
in_ep_ctx->ep_info = out_ep_ctx->ep_info;
|
||
in_ep_ctx->ep_info2 = out_ep_ctx->ep_info2;
|
||
in_ep_ctx->deq = out_ep_ctx->deq;
|
||
in_ep_ctx->tx_info = out_ep_ctx->tx_info;
|
||
}
|
||
|
||
/* Copy output xhci_slot_ctx to the input xhci_slot_ctx.
|
||
* Useful when you want to change one particular aspect of the endpoint and then
|
||
* issue a configure endpoint command. Only the context entries field matters,
|
||
* but we'll copy the whole thing anyway.
|
||
*/
|
||
void xhci_slot_copy(struct xhci_hcd *xhci,
|
||
struct xhci_container_ctx *in_ctx,
|
||
struct xhci_container_ctx *out_ctx)
|
||
{
|
||
struct xhci_slot_ctx *in_slot_ctx;
|
||
struct xhci_slot_ctx *out_slot_ctx;
|
||
|
||
in_slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
|
||
out_slot_ctx = xhci_get_slot_ctx(xhci, out_ctx);
|
||
|
||
in_slot_ctx->dev_info = out_slot_ctx->dev_info;
|
||
in_slot_ctx->dev_info2 = out_slot_ctx->dev_info2;
|
||
in_slot_ctx->tt_info = out_slot_ctx->tt_info;
|
||
in_slot_ctx->dev_state = out_slot_ctx->dev_state;
|
||
}
|
||
|
||
/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */
|
||
static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
|
||
{
|
||
int i;
|
||
struct device *dev = xhci_to_hcd(xhci)->self.controller;
|
||
int num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
|
||
|
||
xhci_dbg(xhci, "Allocating %d scratchpad buffers\n", num_sp);
|
||
|
||
if (!num_sp)
|
||
return 0;
|
||
|
||
xhci->scratchpad = kzalloc(sizeof(*xhci->scratchpad), flags);
|
||
if (!xhci->scratchpad)
|
||
goto fail_sp;
|
||
|
||
xhci->scratchpad->sp_array = dma_alloc_coherent(dev,
|
||
num_sp * sizeof(u64),
|
||
&xhci->scratchpad->sp_dma, flags);
|
||
if (!xhci->scratchpad->sp_array)
|
||
goto fail_sp2;
|
||
|
||
xhci->scratchpad->sp_buffers = kzalloc(sizeof(void *) * num_sp, flags);
|
||
if (!xhci->scratchpad->sp_buffers)
|
||
goto fail_sp3;
|
||
|
||
xhci->scratchpad->sp_dma_buffers =
|
||
kzalloc(sizeof(dma_addr_t) * num_sp, flags);
|
||
|
||
if (!xhci->scratchpad->sp_dma_buffers)
|
||
goto fail_sp4;
|
||
|
||
xhci->dcbaa->dev_context_ptrs[0] = cpu_to_le64(xhci->scratchpad->sp_dma);
|
||
for (i = 0; i < num_sp; i++) {
|
||
dma_addr_t dma;
|
||
void *buf = dma_alloc_coherent(dev, xhci->page_size, &dma,
|
||
flags);
|
||
if (!buf)
|
||
goto fail_sp5;
|
||
|
||
xhci->scratchpad->sp_array[i] = dma;
|
||
xhci->scratchpad->sp_buffers[i] = buf;
|
||
xhci->scratchpad->sp_dma_buffers[i] = dma;
|
||
}
|
||
|
||
return 0;
|
||
|
||
fail_sp5:
|
||
for (i = i - 1; i >= 0; i--) {
|
||
dma_free_coherent(dev, xhci->page_size,
|
||
xhci->scratchpad->sp_buffers[i],
|
||
xhci->scratchpad->sp_dma_buffers[i]);
|
||
}
|
||
kfree(xhci->scratchpad->sp_dma_buffers);
|
||
|
||
fail_sp4:
|
||
kfree(xhci->scratchpad->sp_buffers);
|
||
|
||
fail_sp3:
|
||
dma_free_coherent(dev, num_sp * sizeof(u64),
|
||
xhci->scratchpad->sp_array,
|
||
xhci->scratchpad->sp_dma);
|
||
|
||
fail_sp2:
|
||
kfree(xhci->scratchpad);
|
||
xhci->scratchpad = NULL;
|
||
|
||
fail_sp:
|
||
return -ENOMEM;
|
||
}
|
||
|
||
static void scratchpad_free(struct xhci_hcd *xhci)
|
||
{
|
||
int num_sp;
|
||
int i;
|
||
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
|
||
|
||
if (!xhci->scratchpad)
|
||
return;
|
||
|
||
num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
|
||
|
||
for (i = 0; i < num_sp; i++) {
|
||
dma_free_coherent(&pdev->dev, xhci->page_size,
|
||
xhci->scratchpad->sp_buffers[i],
|
||
xhci->scratchpad->sp_dma_buffers[i]);
|
||
}
|
||
kfree(xhci->scratchpad->sp_dma_buffers);
|
||
kfree(xhci->scratchpad->sp_buffers);
|
||
dma_free_coherent(&pdev->dev, num_sp * sizeof(u64),
|
||
xhci->scratchpad->sp_array,
|
||
xhci->scratchpad->sp_dma);
|
||
kfree(xhci->scratchpad);
|
||
xhci->scratchpad = NULL;
|
||
}
|
||
|
||
struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
|
||
bool allocate_in_ctx, bool allocate_completion,
|
||
gfp_t mem_flags)
|
||
{
|
||
struct xhci_command *command;
|
||
|
||
command = kzalloc(sizeof(*command), mem_flags);
|
||
if (!command)
|
||
return NULL;
|
||
|
||
if (allocate_in_ctx) {
|
||
command->in_ctx =
|
||
xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT,
|
||
mem_flags);
|
||
if (!command->in_ctx) {
|
||
kfree(command);
|
||
return NULL;
|
||
}
|
||
}
|
||
|
||
if (allocate_completion) {
|
||
command->completion =
|
||
kzalloc(sizeof(struct completion), mem_flags);
|
||
if (!command->completion) {
|
||
xhci_free_container_ctx(xhci, command->in_ctx);
|
||
kfree(command);
|
||
return NULL;
|
||
}
|
||
init_completion(command->completion);
|
||
}
|
||
|
||
command->status = 0;
|
||
INIT_LIST_HEAD(&command->cmd_list);
|
||
return command;
|
||
}
|
||
|
||
void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv)
|
||
{
|
||
if (urb_priv) {
|
||
kfree(urb_priv->td[0]);
|
||
kfree(urb_priv);
|
||
}
|
||
}
|
||
|
||
void xhci_free_command(struct xhci_hcd *xhci,
|
||
struct xhci_command *command)
|
||
{
|
||
xhci_free_container_ctx(xhci,
|
||
command->in_ctx);
|
||
kfree(command->completion);
|
||
kfree(command);
|
||
}
|
||
|
||
void xhci_mem_cleanup(struct xhci_hcd *xhci)
|
||
{
|
||
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
|
||
struct dev_info *dev_info, *next;
|
||
struct xhci_cd *cur_cd, *next_cd;
|
||
unsigned long flags;
|
||
int size;
|
||
int i, j, num_ports;
|
||
|
||
/* Free the Event Ring Segment Table and the actual Event Ring */
|
||
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
|
||
if (xhci->erst.entries)
|
||
dma_free_coherent(&pdev->dev, size,
|
||
xhci->erst.entries, xhci->erst.erst_dma_addr);
|
||
xhci->erst.entries = NULL;
|
||
xhci_dbg(xhci, "Freed ERST\n");
|
||
if (xhci->event_ring)
|
||
xhci_ring_free(xhci, xhci->event_ring);
|
||
xhci->event_ring = NULL;
|
||
xhci_dbg(xhci, "Freed event ring\n");
|
||
|
||
if (xhci->lpm_command)
|
||
xhci_free_command(xhci, xhci->lpm_command);
|
||
xhci->cmd_ring_reserved_trbs = 0;
|
||
if (xhci->cmd_ring)
|
||
xhci_ring_free(xhci, xhci->cmd_ring);
|
||
xhci->cmd_ring = NULL;
|
||
xhci_dbg(xhci, "Freed command ring\n");
|
||
list_for_each_entry_safe(cur_cd, next_cd,
|
||
&xhci->cancel_cmd_list, cancel_cmd_list) {
|
||
list_del(&cur_cd->cancel_cmd_list);
|
||
kfree(cur_cd);
|
||
}
|
||
|
||
for (i = 1; i < MAX_HC_SLOTS; ++i)
|
||
xhci_free_virt_device(xhci, i);
|
||
|
||
if (xhci->segment_pool)
|
||
dma_pool_destroy(xhci->segment_pool);
|
||
xhci->segment_pool = NULL;
|
||
xhci_dbg(xhci, "Freed segment pool\n");
|
||
|
||
if (xhci->device_pool)
|
||
dma_pool_destroy(xhci->device_pool);
|
||
xhci->device_pool = NULL;
|
||
xhci_dbg(xhci, "Freed device context pool\n");
|
||
|
||
if (xhci->small_streams_pool)
|
||
dma_pool_destroy(xhci->small_streams_pool);
|
||
xhci->small_streams_pool = NULL;
|
||
xhci_dbg(xhci, "Freed small stream array pool\n");
|
||
|
||
if (xhci->medium_streams_pool)
|
||
dma_pool_destroy(xhci->medium_streams_pool);
|
||
xhci->medium_streams_pool = NULL;
|
||
xhci_dbg(xhci, "Freed medium stream array pool\n");
|
||
|
||
if (xhci->dcbaa)
|
||
dma_free_coherent(&pdev->dev, sizeof(*xhci->dcbaa),
|
||
xhci->dcbaa, xhci->dcbaa->dma);
|
||
xhci->dcbaa = NULL;
|
||
|
||
scratchpad_free(xhci);
|
||
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
list_for_each_entry_safe(dev_info, next, &xhci->lpm_failed_devs, list) {
|
||
list_del(&dev_info->list);
|
||
kfree(dev_info);
|
||
}
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
|
||
if (!xhci->rh_bw)
|
||
goto no_bw;
|
||
|
||
num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
|
||
for (i = 0; i < num_ports; i++) {
|
||
struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
|
||
for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
|
||
struct list_head *ep = &bwt->interval_bw[j].endpoints;
|
||
while (!list_empty(ep))
|
||
list_del_init(ep->next);
|
||
}
|
||
}
|
||
|
||
for (i = 0; i < num_ports; i++) {
|
||
struct xhci_tt_bw_info *tt, *n;
|
||
list_for_each_entry_safe(tt, n, &xhci->rh_bw[i].tts, tt_list) {
|
||
list_del(&tt->tt_list);
|
||
kfree(tt);
|
||
}
|
||
}
|
||
|
||
no_bw:
|
||
xhci->num_usb2_ports = 0;
|
||
xhci->num_usb3_ports = 0;
|
||
xhci->num_active_eps = 0;
|
||
kfree(xhci->usb2_ports);
|
||
kfree(xhci->usb3_ports);
|
||
kfree(xhci->port_array);
|
||
kfree(xhci->rh_bw);
|
||
kfree(xhci->ext_caps);
|
||
|
||
xhci->page_size = 0;
|
||
xhci->page_shift = 0;
|
||
xhci->bus_state[0].bus_suspended = 0;
|
||
xhci->bus_state[1].bus_suspended = 0;
|
||
}
|
||
|
||
static int xhci_test_trb_in_td(struct xhci_hcd *xhci,
|
||
struct xhci_segment *input_seg,
|
||
union xhci_trb *start_trb,
|
||
union xhci_trb *end_trb,
|
||
dma_addr_t input_dma,
|
||
struct xhci_segment *result_seg,
|
||
char *test_name, int test_number)
|
||
{
|
||
unsigned long long start_dma;
|
||
unsigned long long end_dma;
|
||
struct xhci_segment *seg;
|
||
|
||
start_dma = xhci_trb_virt_to_dma(input_seg, start_trb);
|
||
end_dma = xhci_trb_virt_to_dma(input_seg, end_trb);
|
||
|
||
seg = trb_in_td(input_seg, start_trb, end_trb, input_dma);
|
||
if (seg != result_seg) {
|
||
xhci_warn(xhci, "WARN: %s TRB math test %d failed!\n",
|
||
test_name, test_number);
|
||
xhci_warn(xhci, "Tested TRB math w/ seg %p and "
|
||
"input DMA 0x%llx\n",
|
||
input_seg,
|
||
(unsigned long long) input_dma);
|
||
xhci_warn(xhci, "starting TRB %p (0x%llx DMA), "
|
||
"ending TRB %p (0x%llx DMA)\n",
|
||
start_trb, start_dma,
|
||
end_trb, end_dma);
|
||
xhci_warn(xhci, "Expected seg %p, got seg %p\n",
|
||
result_seg, seg);
|
||
return -1;
|
||
}
|
||
return 0;
|
||
}
|
||
|
||
/* TRB math checks for xhci_trb_in_td(), using the command and event rings. */
|
||
static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci, gfp_t mem_flags)
|
||
{
|
||
struct {
|
||
dma_addr_t input_dma;
|
||
struct xhci_segment *result_seg;
|
||
} simple_test_vector [] = {
|
||
/* A zeroed DMA field should fail */
|
||
{ 0, NULL },
|
||
/* One TRB before the ring start should fail */
|
||
{ xhci->event_ring->first_seg->dma - 16, NULL },
|
||
/* One byte before the ring start should fail */
|
||
{ xhci->event_ring->first_seg->dma - 1, NULL },
|
||
/* Starting TRB should succeed */
|
||
{ xhci->event_ring->first_seg->dma, xhci->event_ring->first_seg },
|
||
/* Ending TRB should succeed */
|
||
{ xhci->event_ring->first_seg->dma + (TRBS_PER_SEGMENT - 1)*16,
|
||
xhci->event_ring->first_seg },
|
||
/* One byte after the ring end should fail */
|
||
{ xhci->event_ring->first_seg->dma + (TRBS_PER_SEGMENT - 1)*16 + 1, NULL },
|
||
/* One TRB after the ring end should fail */
|
||
{ xhci->event_ring->first_seg->dma + (TRBS_PER_SEGMENT)*16, NULL },
|
||
/* An address of all ones should fail */
|
||
{ (dma_addr_t) (~0), NULL },
|
||
};
|
||
struct {
|
||
struct xhci_segment *input_seg;
|
||
union xhci_trb *start_trb;
|
||
union xhci_trb *end_trb;
|
||
dma_addr_t input_dma;
|
||
struct xhci_segment *result_seg;
|
||
} complex_test_vector [] = {
|
||
/* Test feeding a valid DMA address from a different ring */
|
||
{ .input_seg = xhci->event_ring->first_seg,
|
||
.start_trb = xhci->event_ring->first_seg->trbs,
|
||
.end_trb = &xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 1],
|
||
.input_dma = xhci->cmd_ring->first_seg->dma,
|
||
.result_seg = NULL,
|
||
},
|
||
/* Test feeding a valid end TRB from a different ring */
|
||
{ .input_seg = xhci->event_ring->first_seg,
|
||
.start_trb = xhci->event_ring->first_seg->trbs,
|
||
.end_trb = &xhci->cmd_ring->first_seg->trbs[TRBS_PER_SEGMENT - 1],
|
||
.input_dma = xhci->cmd_ring->first_seg->dma,
|
||
.result_seg = NULL,
|
||
},
|
||
/* Test feeding a valid start and end TRB from a different ring */
|
||
{ .input_seg = xhci->event_ring->first_seg,
|
||
.start_trb = xhci->cmd_ring->first_seg->trbs,
|
||
.end_trb = &xhci->cmd_ring->first_seg->trbs[TRBS_PER_SEGMENT - 1],
|
||
.input_dma = xhci->cmd_ring->first_seg->dma,
|
||
.result_seg = NULL,
|
||
},
|
||
/* TRB in this ring, but after this TD */
|
||
{ .input_seg = xhci->event_ring->first_seg,
|
||
.start_trb = &xhci->event_ring->first_seg->trbs[0],
|
||
.end_trb = &xhci->event_ring->first_seg->trbs[3],
|
||
.input_dma = xhci->event_ring->first_seg->dma + 4*16,
|
||
.result_seg = NULL,
|
||
},
|
||
/* TRB in this ring, but before this TD */
|
||
{ .input_seg = xhci->event_ring->first_seg,
|
||
.start_trb = &xhci->event_ring->first_seg->trbs[3],
|
||
.end_trb = &xhci->event_ring->first_seg->trbs[6],
|
||
.input_dma = xhci->event_ring->first_seg->dma + 2*16,
|
||
.result_seg = NULL,
|
||
},
|
||
/* TRB in this ring, but after this wrapped TD */
|
||
{ .input_seg = xhci->event_ring->first_seg,
|
||
.start_trb = &xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 3],
|
||
.end_trb = &xhci->event_ring->first_seg->trbs[1],
|
||
.input_dma = xhci->event_ring->first_seg->dma + 2*16,
|
||
.result_seg = NULL,
|
||
},
|
||
/* TRB in this ring, but before this wrapped TD */
|
||
{ .input_seg = xhci->event_ring->first_seg,
|
||
.start_trb = &xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 3],
|
||
.end_trb = &xhci->event_ring->first_seg->trbs[1],
|
||
.input_dma = xhci->event_ring->first_seg->dma + (TRBS_PER_SEGMENT - 4)*16,
|
||
.result_seg = NULL,
|
||
},
|
||
/* TRB not in this ring, and we have a wrapped TD */
|
||
{ .input_seg = xhci->event_ring->first_seg,
|
||
.start_trb = &xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 3],
|
||
.end_trb = &xhci->event_ring->first_seg->trbs[1],
|
||
.input_dma = xhci->cmd_ring->first_seg->dma + 2*16,
|
||
.result_seg = NULL,
|
||
},
|
||
};
|
||
|
||
unsigned int num_tests;
|
||
int i, ret;
|
||
|
||
num_tests = ARRAY_SIZE(simple_test_vector);
|
||
for (i = 0; i < num_tests; i++) {
|
||
ret = xhci_test_trb_in_td(xhci,
|
||
xhci->event_ring->first_seg,
|
||
xhci->event_ring->first_seg->trbs,
|
||
&xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 1],
|
||
simple_test_vector[i].input_dma,
|
||
simple_test_vector[i].result_seg,
|
||
"Simple", i);
|
||
if (ret < 0)
|
||
return ret;
|
||
}
|
||
|
||
num_tests = ARRAY_SIZE(complex_test_vector);
|
||
for (i = 0; i < num_tests; i++) {
|
||
ret = xhci_test_trb_in_td(xhci,
|
||
complex_test_vector[i].input_seg,
|
||
complex_test_vector[i].start_trb,
|
||
complex_test_vector[i].end_trb,
|
||
complex_test_vector[i].input_dma,
|
||
complex_test_vector[i].result_seg,
|
||
"Complex", i);
|
||
if (ret < 0)
|
||
return ret;
|
||
}
|
||
xhci_dbg(xhci, "TRB math tests passed.\n");
|
||
return 0;
|
||
}
|
||
|
||
static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
|
||
{
|
||
u64 temp;
|
||
dma_addr_t deq;
|
||
|
||
deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
|
||
xhci->event_ring->dequeue);
|
||
if (deq == 0 && !in_interrupt())
|
||
xhci_warn(xhci, "WARN something wrong with SW event ring "
|
||
"dequeue ptr.\n");
|
||
/* Update HC event ring dequeue pointer */
|
||
temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
|
||
temp &= ERST_PTR_MASK;
|
||
/* Don't clear the EHB bit (which is RW1C) because
|
||
* there might be more events to service.
|
||
*/
|
||
temp &= ~ERST_EHB;
|
||
xhci_dbg(xhci, "// Write event ring dequeue pointer, "
|
||
"preserving EHB bit\n");
|
||
xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
|
||
&xhci->ir_set->erst_dequeue);
|
||
}
|
||
|
||
static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
|
||
__le32 __iomem *addr, u8 major_revision, int max_caps)
|
||
{
|
||
u32 temp, port_offset, port_count;
|
||
int i;
|
||
|
||
if (major_revision > 0x03) {
|
||
xhci_warn(xhci, "Ignoring unknown port speed, "
|
||
"Ext Cap %p, revision = 0x%x\n",
|
||
addr, major_revision);
|
||
/* Ignoring port protocol we can't understand. FIXME */
|
||
return;
|
||
}
|
||
|
||
/* Port offset and count in the third dword, see section 7.2 */
|
||
temp = xhci_readl(xhci, addr + 2);
|
||
port_offset = XHCI_EXT_PORT_OFF(temp);
|
||
port_count = XHCI_EXT_PORT_COUNT(temp);
|
||
xhci_dbg(xhci, "Ext Cap %p, port offset = %u, "
|
||
"count = %u, revision = 0x%x\n",
|
||
addr, port_offset, port_count, major_revision);
|
||
/* Port count includes the current port offset */
|
||
if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
|
||
/* WTF? "Valid values are ‘1’ to MaxPorts" */
|
||
return;
|
||
|
||
/* cache usb2 port capabilities */
|
||
if (major_revision < 0x03 && xhci->num_ext_caps < max_caps)
|
||
xhci->ext_caps[xhci->num_ext_caps++] = temp;
|
||
|
||
/* Check the host's USB2 LPM capability */
|
||
if ((xhci->hci_version == 0x96) && (major_revision != 0x03) &&
|
||
(temp & XHCI_L1C)) {
|
||
xhci_dbg(xhci, "xHCI 0.96: support USB2 software lpm\n");
|
||
xhci->sw_lpm_support = 1;
|
||
}
|
||
|
||
if ((xhci->hci_version >= 0x100) && (major_revision != 0x03)) {
|
||
xhci_dbg(xhci, "xHCI 1.0: support USB2 software lpm\n");
|
||
xhci->sw_lpm_support = 1;
|
||
if (temp & XHCI_HLC) {
|
||
xhci_dbg(xhci, "xHCI 1.0: support USB2 hardware lpm\n");
|
||
xhci->hw_lpm_support = 1;
|
||
}
|
||
}
|
||
|
||
port_offset--;
|
||
for (i = port_offset; i < (port_offset + port_count); i++) {
|
||
/* Duplicate entry. Ignore the port if the revisions differ. */
|
||
if (xhci->port_array[i] != 0) {
|
||
xhci_warn(xhci, "Duplicate port entry, Ext Cap %p,"
|
||
" port %u\n", addr, i);
|
||
xhci_warn(xhci, "Port was marked as USB %u, "
|
||
"duplicated as USB %u\n",
|
||
xhci->port_array[i], major_revision);
|
||
/* Only adjust the roothub port counts if we haven't
|
||
* found a similar duplicate.
|
||
*/
|
||
if (xhci->port_array[i] != major_revision &&
|
||
xhci->port_array[i] != DUPLICATE_ENTRY) {
|
||
if (xhci->port_array[i] == 0x03)
|
||
xhci->num_usb3_ports--;
|
||
else
|
||
xhci->num_usb2_ports--;
|
||
xhci->port_array[i] = DUPLICATE_ENTRY;
|
||
}
|
||
/* FIXME: Should we disable the port? */
|
||
continue;
|
||
}
|
||
xhci->port_array[i] = major_revision;
|
||
if (major_revision == 0x03)
|
||
xhci->num_usb3_ports++;
|
||
else
|
||
xhci->num_usb2_ports++;
|
||
}
|
||
/* FIXME: Should we disable ports not in the Extended Capabilities? */
|
||
}
|
||
|
||
/*
|
||
* Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
|
||
* specify what speeds each port is supposed to be. We can't count on the port
|
||
* speed bits in the PORTSC register being correct until a device is connected,
|
||
* but we need to set up the two fake roothubs with the correct number of USB
|
||
* 3.0 and USB 2.0 ports at host controller initialization time.
|
||
*/
|
||
static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
|
||
{
|
||
__le32 __iomem *addr, *tmp_addr;
|
||
u32 offset, tmp_offset;
|
||
unsigned int num_ports;
|
||
int i, j, port_index;
|
||
int cap_count = 0;
|
||
|
||
addr = &xhci->cap_regs->hcc_params;
|
||
offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
|
||
if (offset == 0) {
|
||
xhci_err(xhci, "No Extended Capability registers, "
|
||
"unable to set up roothub.\n");
|
||
return -ENODEV;
|
||
}
|
||
|
||
num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
|
||
xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags);
|
||
if (!xhci->port_array)
|
||
return -ENOMEM;
|
||
|
||
xhci->rh_bw = kzalloc(sizeof(*xhci->rh_bw)*num_ports, flags);
|
||
if (!xhci->rh_bw)
|
||
return -ENOMEM;
|
||
for (i = 0; i < num_ports; i++) {
|
||
struct xhci_interval_bw_table *bw_table;
|
||
|
||
INIT_LIST_HEAD(&xhci->rh_bw[i].tts);
|
||
bw_table = &xhci->rh_bw[i].bw_table;
|
||
for (j = 0; j < XHCI_MAX_INTERVAL; j++)
|
||
INIT_LIST_HEAD(&bw_table->interval_bw[j].endpoints);
|
||
}
|
||
|
||
/*
|
||
* For whatever reason, the first capability offset is from the
|
||
* capability register base, not from the HCCPARAMS register.
|
||
* See section 5.3.6 for offset calculation.
|
||
*/
|
||
addr = &xhci->cap_regs->hc_capbase + offset;
|
||
|
||
tmp_addr = addr;
|
||
tmp_offset = offset;
|
||
|
||
/* count extended protocol capability entries for later caching */
|
||
do {
|
||
u32 cap_id;
|
||
cap_id = xhci_readl(xhci, tmp_addr);
|
||
if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
|
||
cap_count++;
|
||
tmp_offset = XHCI_EXT_CAPS_NEXT(cap_id);
|
||
tmp_addr += tmp_offset;
|
||
} while (tmp_offset);
|
||
|
||
xhci->ext_caps = kzalloc(sizeof(*xhci->ext_caps) * cap_count, flags);
|
||
if (!xhci->ext_caps)
|
||
return -ENOMEM;
|
||
|
||
while (1) {
|
||
u32 cap_id;
|
||
|
||
cap_id = xhci_readl(xhci, addr);
|
||
if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
|
||
xhci_add_in_port(xhci, num_ports, addr,
|
||
(u8) XHCI_EXT_PORT_MAJOR(cap_id),
|
||
cap_count);
|
||
offset = XHCI_EXT_CAPS_NEXT(cap_id);
|
||
if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports)
|
||
== num_ports)
|
||
break;
|
||
/*
|
||
* Once you're into the Extended Capabilities, the offset is
|
||
* always relative to the register holding the offset.
|
||
*/
|
||
addr += offset;
|
||
}
|
||
|
||
if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) {
|
||
xhci_warn(xhci, "No ports on the roothubs?\n");
|
||
return -ENODEV;
|
||
}
|
||
xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n",
|
||
xhci->num_usb2_ports, xhci->num_usb3_ports);
|
||
|
||
/* Place limits on the number of roothub ports so that the hub
|
||
* descriptors aren't longer than the USB core will allocate.
|
||
*/
|
||
if (xhci->num_usb3_ports > 15) {
|
||
xhci_dbg(xhci, "Limiting USB 3.0 roothub ports to 15.\n");
|
||
xhci->num_usb3_ports = 15;
|
||
}
|
||
if (xhci->num_usb2_ports > USB_MAXCHILDREN) {
|
||
xhci_dbg(xhci, "Limiting USB 2.0 roothub ports to %u.\n",
|
||
USB_MAXCHILDREN);
|
||
xhci->num_usb2_ports = USB_MAXCHILDREN;
|
||
}
|
||
|
||
/*
|
||
* Note we could have all USB 3.0 ports, or all USB 2.0 ports.
|
||
* Not sure how the USB core will handle a hub with no ports...
|
||
*/
|
||
if (xhci->num_usb2_ports) {
|
||
xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)*
|
||
xhci->num_usb2_ports, flags);
|
||
if (!xhci->usb2_ports)
|
||
return -ENOMEM;
|
||
|
||
port_index = 0;
|
||
for (i = 0; i < num_ports; i++) {
|
||
if (xhci->port_array[i] == 0x03 ||
|
||
xhci->port_array[i] == 0 ||
|
||
xhci->port_array[i] == DUPLICATE_ENTRY)
|
||
continue;
|
||
|
||
xhci->usb2_ports[port_index] =
|
||
&xhci->op_regs->port_status_base +
|
||
NUM_PORT_REGS*i;
|
||
xhci_dbg(xhci, "USB 2.0 port at index %u, "
|
||
"addr = %p\n", i,
|
||
xhci->usb2_ports[port_index]);
|
||
port_index++;
|
||
if (port_index == xhci->num_usb2_ports)
|
||
break;
|
||
}
|
||
}
|
||
if (xhci->num_usb3_ports) {
|
||
xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*
|
||
xhci->num_usb3_ports, flags);
|
||
if (!xhci->usb3_ports)
|
||
return -ENOMEM;
|
||
|
||
port_index = 0;
|
||
for (i = 0; i < num_ports; i++)
|
||
if (xhci->port_array[i] == 0x03) {
|
||
xhci->usb3_ports[port_index] =
|
||
&xhci->op_regs->port_status_base +
|
||
NUM_PORT_REGS*i;
|
||
xhci_dbg(xhci, "USB 3.0 port at index %u, "
|
||
"addr = %p\n", i,
|
||
xhci->usb3_ports[port_index]);
|
||
port_index++;
|
||
if (port_index == xhci->num_usb3_ports)
|
||
break;
|
||
}
|
||
}
|
||
return 0;
|
||
}
|
||
|
||
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
|
||
{
|
||
dma_addr_t dma;
|
||
struct device *dev = xhci_to_hcd(xhci)->self.controller;
|
||
unsigned int val, val2;
|
||
u64 val_64;
|
||
struct xhci_segment *seg;
|
||
u32 page_size, temp;
|
||
int i;
|
||
|
||
INIT_LIST_HEAD(&xhci->lpm_failed_devs);
|
||
INIT_LIST_HEAD(&xhci->cancel_cmd_list);
|
||
|
||
page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
|
||
xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size);
|
||
for (i = 0; i < 16; i++) {
|
||
if ((0x1 & page_size) != 0)
|
||
break;
|
||
page_size = page_size >> 1;
|
||
}
|
||
if (i < 16)
|
||
xhci_dbg(xhci, "Supported page size of %iK\n", (1 << (i+12)) / 1024);
|
||
else
|
||
xhci_warn(xhci, "WARN: no supported page size\n");
|
||
/* Use 4K pages, since that's common and the minimum the HC supports */
|
||
xhci->page_shift = 12;
|
||
xhci->page_size = 1 << xhci->page_shift;
|
||
xhci_dbg(xhci, "HCD page size set to %iK\n", xhci->page_size / 1024);
|
||
|
||
/*
|
||
* Program the Number of Device Slots Enabled field in the CONFIG
|
||
* register with the max value of slots the HC can handle.
|
||
*/
|
||
val = HCS_MAX_SLOTS(xhci_readl(xhci, &xhci->cap_regs->hcs_params1));
|
||
xhci_dbg(xhci, "// xHC can handle at most %d device slots.\n",
|
||
(unsigned int) val);
|
||
val2 = xhci_readl(xhci, &xhci->op_regs->config_reg);
|
||
val |= (val2 & ~HCS_SLOTS_MASK);
|
||
xhci_dbg(xhci, "// Setting Max device slots reg = 0x%x.\n",
|
||
(unsigned int) val);
|
||
xhci_writel(xhci, val, &xhci->op_regs->config_reg);
|
||
|
||
/*
|
||
* Section 5.4.8 - doorbell array must be
|
||
* "physically contiguous and 64-byte (cache line) aligned".
|
||
*/
|
||
xhci->dcbaa = dma_alloc_coherent(dev, sizeof(*xhci->dcbaa), &dma,
|
||
GFP_KERNEL);
|
||
if (!xhci->dcbaa)
|
||
goto fail;
|
||
memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa));
|
||
xhci->dcbaa->dma = dma;
|
||
xhci_dbg(xhci, "// Device context base array address = 0x%llx (DMA), %p (virt)\n",
|
||
(unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
|
||
xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr);
|
||
|
||
/*
|
||
* Initialize the ring segment pool. The ring must be a contiguous
|
||
* structure comprised of TRBs. The TRBs must be 16 byte aligned,
|
||
* however, the command ring segment needs 64-byte aligned segments,
|
||
* so we pick the greater alignment need.
|
||
*/
|
||
xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
|
||
TRB_SEGMENT_SIZE, 64, xhci->page_size);
|
||
|
||
/* See Table 46 and Note on Figure 55 */
|
||
xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,
|
||
2112, 64, xhci->page_size);
|
||
if (!xhci->segment_pool || !xhci->device_pool)
|
||
goto fail;
|
||
|
||
/* Linear stream context arrays don't have any boundary restrictions,
|
||
* and only need to be 16-byte aligned.
|
||
*/
|
||
xhci->small_streams_pool =
|
||
dma_pool_create("xHCI 256 byte stream ctx arrays",
|
||
dev, SMALL_STREAM_ARRAY_SIZE, 16, 0);
|
||
xhci->medium_streams_pool =
|
||
dma_pool_create("xHCI 1KB stream ctx arrays",
|
||
dev, MEDIUM_STREAM_ARRAY_SIZE, 16, 0);
|
||
/* Any stream context array bigger than MEDIUM_STREAM_ARRAY_SIZE
|
||
* will be allocated with dma_alloc_coherent()
|
||
*/
|
||
|
||
if (!xhci->small_streams_pool || !xhci->medium_streams_pool)
|
||
goto fail;
|
||
|
||
/* Set up the command ring to have one segments for now. */
|
||
xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags);
|
||
if (!xhci->cmd_ring)
|
||
goto fail;
|
||
xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
|
||
xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
|
||
(unsigned long long)xhci->cmd_ring->first_seg->dma);
|
||
|
||
/* Set the address in the Command Ring Control register */
|
||
val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
|
||
val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
|
||
(xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) |
|
||
xhci->cmd_ring->cycle_state;
|
||
xhci_dbg(xhci, "// Setting command ring address to 0x%x\n", val);
|
||
xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
|
||
xhci_dbg_cmd_ptrs(xhci);
|
||
|
||
xhci->lpm_command = xhci_alloc_command(xhci, true, true, flags);
|
||
if (!xhci->lpm_command)
|
||
goto fail;
|
||
|
||
/* Reserve one command ring TRB for disabling LPM.
|
||
* Since the USB core grabs the shared usb_bus bandwidth mutex before
|
||
* disabling LPM, we only need to reserve one TRB for all devices.
|
||
*/
|
||
xhci->cmd_ring_reserved_trbs++;
|
||
|
||
val = xhci_readl(xhci, &xhci->cap_regs->db_off);
|
||
val &= DBOFF_MASK;
|
||
xhci_dbg(xhci, "// Doorbell array is located at offset 0x%x"
|
||
" from cap regs base addr\n", val);
|
||
xhci->dba = (void __iomem *) xhci->cap_regs + val;
|
||
xhci_dbg_regs(xhci);
|
||
xhci_print_run_regs(xhci);
|
||
/* Set ir_set to interrupt register set 0 */
|
||
xhci->ir_set = &xhci->run_regs->ir_set[0];
|
||
|
||
/*
|
||
* Event ring setup: Allocate a normal ring, but also setup
|
||
* the event ring segment table (ERST). Section 4.9.3.
|
||
*/
|
||
xhci_dbg(xhci, "// Allocating event ring\n");
|
||
xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, 1, TYPE_EVENT,
|
||
flags);
|
||
if (!xhci->event_ring)
|
||
goto fail;
|
||
if (xhci_check_trb_in_td_math(xhci, flags) < 0)
|
||
goto fail;
|
||
|
||
xhci->erst.entries = dma_alloc_coherent(dev,
|
||
sizeof(struct xhci_erst_entry) * ERST_NUM_SEGS, &dma,
|
||
GFP_KERNEL);
|
||
if (!xhci->erst.entries)
|
||
goto fail;
|
||
xhci_dbg(xhci, "// Allocated event ring segment table at 0x%llx\n",
|
||
(unsigned long long)dma);
|
||
|
||
memset(xhci->erst.entries, 0, sizeof(struct xhci_erst_entry)*ERST_NUM_SEGS);
|
||
xhci->erst.num_entries = ERST_NUM_SEGS;
|
||
xhci->erst.erst_dma_addr = dma;
|
||
xhci_dbg(xhci, "Set ERST to 0; private num segs = %i, virt addr = %p, dma addr = 0x%llx\n",
|
||
xhci->erst.num_entries,
|
||
xhci->erst.entries,
|
||
(unsigned long long)xhci->erst.erst_dma_addr);
|
||
|
||
/* set ring base address and size for each segment table entry */
|
||
for (val = 0, seg = xhci->event_ring->first_seg; val < ERST_NUM_SEGS; val++) {
|
||
struct xhci_erst_entry *entry = &xhci->erst.entries[val];
|
||
entry->seg_addr = cpu_to_le64(seg->dma);
|
||
entry->seg_size = cpu_to_le32(TRBS_PER_SEGMENT);
|
||
entry->rsvd = 0;
|
||
seg = seg->next;
|
||
}
|
||
|
||
/* set ERST count with the number of entries in the segment table */
|
||
val = xhci_readl(xhci, &xhci->ir_set->erst_size);
|
||
val &= ERST_SIZE_MASK;
|
||
val |= ERST_NUM_SEGS;
|
||
xhci_dbg(xhci, "// Write ERST size = %i to ir_set 0 (some bits preserved)\n",
|
||
val);
|
||
xhci_writel(xhci, val, &xhci->ir_set->erst_size);
|
||
|
||
xhci_dbg(xhci, "// Set ERST entries to point to event ring.\n");
|
||
/* set the segment table base address */
|
||
xhci_dbg(xhci, "// Set ERST base address for ir_set 0 = 0x%llx\n",
|
||
(unsigned long long)xhci->erst.erst_dma_addr);
|
||
val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base);
|
||
val_64 &= ERST_PTR_MASK;
|
||
val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK);
|
||
xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base);
|
||
|
||
/* Set the event ring dequeue address */
|
||
xhci_set_hc_event_deq(xhci);
|
||
xhci_dbg(xhci, "Wrote ERST address to ir_set 0.\n");
|
||
xhci_print_ir_set(xhci, 0);
|
||
|
||
/*
|
||
* XXX: Might need to set the Interrupter Moderation Register to
|
||
* something other than the default (~1ms minimum between interrupts).
|
||
* See section 5.5.1.2.
|
||
*/
|
||
init_completion(&xhci->addr_dev);
|
||
for (i = 0; i < MAX_HC_SLOTS; ++i)
|
||
xhci->devs[i] = NULL;
|
||
for (i = 0; i < USB_MAXCHILDREN; ++i) {
|
||
xhci->bus_state[0].resume_done[i] = 0;
|
||
xhci->bus_state[1].resume_done[i] = 0;
|
||
}
|
||
|
||
if (scratchpad_alloc(xhci, flags))
|
||
goto fail;
|
||
if (xhci_setup_port_arrays(xhci, flags))
|
||
goto fail;
|
||
|
||
/* Enable USB 3.0 device notifications for function remote wake, which
|
||
* is necessary for allowing USB 3.0 devices to do remote wakeup from
|
||
* U3 (device suspend).
|
||
*/
|
||
temp = xhci_readl(xhci, &xhci->op_regs->dev_notification);
|
||
temp &= ~DEV_NOTE_MASK;
|
||
temp |= DEV_NOTE_FWAKE;
|
||
xhci_writel(xhci, temp, &xhci->op_regs->dev_notification);
|
||
|
||
return 0;
|
||
|
||
fail:
|
||
xhci_warn(xhci, "Couldn't initialize memory\n");
|
||
xhci_halt(xhci);
|
||
xhci_reset(xhci);
|
||
xhci_mem_cleanup(xhci);
|
||
return -ENOMEM;
|
||
}
|