forked from luck/tmp_suning_uos_patched
ca6fafd183
The FEC (Fast Ethernet Crontroller) module on many ColdFire parts can be compiled into the kernel, or as a module. Therefore the platform device support for it is required whenever the driver is enabled - not just when built into the kernel. Use IS_ENABLED(CONFIG_FEC) instead of a conditional check on only the driver being built into the kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
370 lines
7.5 KiB
C
370 lines
7.5 KiB
C
/*
|
|
* device.c -- common ColdFire SoC device support
|
|
*
|
|
* (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file COPYING in the main directory of this archive
|
|
* for more details.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/fec.h>
|
|
#include <asm/traps.h>
|
|
#include <asm/coldfire.h>
|
|
#include <asm/mcfsim.h>
|
|
#include <asm/mcfuart.h>
|
|
#include <asm/mcfqspi.h>
|
|
|
|
/*
|
|
* All current ColdFire parts contain from 2, 3, 4 or 10 UARTS.
|
|
*/
|
|
static struct mcf_platform_uart mcf_uart_platform_data[] = {
|
|
{
|
|
.mapbase = MCFUART_BASE0,
|
|
.irq = MCF_IRQ_UART0,
|
|
},
|
|
{
|
|
.mapbase = MCFUART_BASE1,
|
|
.irq = MCF_IRQ_UART1,
|
|
},
|
|
#ifdef MCFUART_BASE2
|
|
{
|
|
.mapbase = MCFUART_BASE2,
|
|
.irq = MCF_IRQ_UART2,
|
|
},
|
|
#endif
|
|
#ifdef MCFUART_BASE3
|
|
{
|
|
.mapbase = MCFUART_BASE3,
|
|
.irq = MCF_IRQ_UART3,
|
|
},
|
|
#endif
|
|
#ifdef MCFUART_BASE4
|
|
{
|
|
.mapbase = MCFUART_BASE4,
|
|
.irq = MCF_IRQ_UART4,
|
|
},
|
|
#endif
|
|
#ifdef MCFUART_BASE5
|
|
{
|
|
.mapbase = MCFUART_BASE5,
|
|
.irq = MCF_IRQ_UART5,
|
|
},
|
|
#endif
|
|
#ifdef MCFUART_BASE6
|
|
{
|
|
.mapbase = MCFUART_BASE6,
|
|
.irq = MCF_IRQ_UART6,
|
|
},
|
|
#endif
|
|
#ifdef MCFUART_BASE7
|
|
{
|
|
.mapbase = MCFUART_BASE7,
|
|
.irq = MCF_IRQ_UART7,
|
|
},
|
|
#endif
|
|
#ifdef MCFUART_BASE8
|
|
{
|
|
.mapbase = MCFUART_BASE8,
|
|
.irq = MCF_IRQ_UART8,
|
|
},
|
|
#endif
|
|
#ifdef MCFUART_BASE9
|
|
{
|
|
.mapbase = MCFUART_BASE9,
|
|
.irq = MCF_IRQ_UART9,
|
|
},
|
|
#endif
|
|
{ },
|
|
};
|
|
|
|
static struct platform_device mcf_uart = {
|
|
.name = "mcfuart",
|
|
.id = 0,
|
|
.dev.platform_data = mcf_uart_platform_data,
|
|
};
|
|
|
|
#if IS_ENABLED(CONFIG_FEC)
|
|
|
|
#ifdef CONFIG_M5441x
|
|
#define FEC_NAME "enet-fec"
|
|
static struct fec_platform_data fec_pdata = {
|
|
.phy = PHY_INTERFACE_MODE_RMII,
|
|
};
|
|
#define FEC_PDATA (&fec_pdata)
|
|
#else
|
|
#define FEC_NAME "fec"
|
|
#define FEC_PDATA NULL
|
|
#endif
|
|
|
|
/*
|
|
* Some ColdFire cores contain the Fast Ethernet Controller (FEC)
|
|
* block. It is Freescale's own hardware block. Some ColdFires
|
|
* have 2 of these.
|
|
*/
|
|
static struct resource mcf_fec0_resources[] = {
|
|
{
|
|
.start = MCFFEC_BASE0,
|
|
.end = MCFFEC_BASE0 + MCFFEC_SIZE0 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = MCF_IRQ_FECRX0,
|
|
.end = MCF_IRQ_FECRX0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.start = MCF_IRQ_FECTX0,
|
|
.end = MCF_IRQ_FECTX0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.start = MCF_IRQ_FECENTC0,
|
|
.end = MCF_IRQ_FECENTC0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device mcf_fec0 = {
|
|
.name = FEC_NAME,
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(mcf_fec0_resources),
|
|
.resource = mcf_fec0_resources,
|
|
.dev.platform_data = FEC_PDATA,
|
|
};
|
|
|
|
#ifdef MCFFEC_BASE1
|
|
static struct resource mcf_fec1_resources[] = {
|
|
{
|
|
.start = MCFFEC_BASE1,
|
|
.end = MCFFEC_BASE1 + MCFFEC_SIZE1 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = MCF_IRQ_FECRX1,
|
|
.end = MCF_IRQ_FECRX1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.start = MCF_IRQ_FECTX1,
|
|
.end = MCF_IRQ_FECTX1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.start = MCF_IRQ_FECENTC1,
|
|
.end = MCF_IRQ_FECENTC1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device mcf_fec1 = {
|
|
.name = FEC_NAME,
|
|
.id = 1,
|
|
.num_resources = ARRAY_SIZE(mcf_fec1_resources),
|
|
.resource = mcf_fec1_resources,
|
|
.dev.platform_data = FEC_PDATA,
|
|
};
|
|
#endif /* MCFFEC_BASE1 */
|
|
#endif /* CONFIG_FEC */
|
|
|
|
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
|
|
/*
|
|
* The ColdFire QSPI module is an SPI protocol hardware block used
|
|
* on a number of different ColdFire CPUs.
|
|
*/
|
|
static struct resource mcf_qspi_resources[] = {
|
|
{
|
|
.start = MCFQSPI_BASE,
|
|
.end = MCFQSPI_BASE + MCFQSPI_SIZE - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = MCF_IRQ_QSPI,
|
|
.end = MCF_IRQ_QSPI,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static int mcf_cs_setup(struct mcfqspi_cs_control *cs_control)
|
|
{
|
|
int status;
|
|
|
|
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
|
|
if (status) {
|
|
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
|
|
goto fail0;
|
|
}
|
|
status = gpio_direction_output(MCFQSPI_CS0, 1);
|
|
if (status) {
|
|
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
|
|
goto fail1;
|
|
}
|
|
|
|
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
|
|
if (status) {
|
|
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
|
|
goto fail1;
|
|
}
|
|
status = gpio_direction_output(MCFQSPI_CS1, 1);
|
|
if (status) {
|
|
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
|
|
goto fail2;
|
|
}
|
|
|
|
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
|
|
if (status) {
|
|
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
|
|
goto fail2;
|
|
}
|
|
status = gpio_direction_output(MCFQSPI_CS2, 1);
|
|
if (status) {
|
|
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
|
|
goto fail3;
|
|
}
|
|
|
|
#ifdef MCFQSPI_CS3
|
|
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
|
|
if (status) {
|
|
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
|
|
goto fail3;
|
|
}
|
|
status = gpio_direction_output(MCFQSPI_CS3, 1);
|
|
if (status) {
|
|
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
|
|
gpio_free(MCFQSPI_CS3);
|
|
goto fail3;
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
|
|
fail3:
|
|
gpio_free(MCFQSPI_CS2);
|
|
fail2:
|
|
gpio_free(MCFQSPI_CS1);
|
|
fail1:
|
|
gpio_free(MCFQSPI_CS0);
|
|
fail0:
|
|
return status;
|
|
}
|
|
|
|
static void mcf_cs_teardown(struct mcfqspi_cs_control *cs_control)
|
|
{
|
|
#ifdef MCFQSPI_CS3
|
|
gpio_free(MCFQSPI_CS3);
|
|
#endif
|
|
gpio_free(MCFQSPI_CS2);
|
|
gpio_free(MCFQSPI_CS1);
|
|
gpio_free(MCFQSPI_CS0);
|
|
}
|
|
|
|
static void mcf_cs_select(struct mcfqspi_cs_control *cs_control,
|
|
u8 chip_select, bool cs_high)
|
|
{
|
|
switch (chip_select) {
|
|
case 0:
|
|
gpio_set_value(MCFQSPI_CS0, cs_high);
|
|
break;
|
|
case 1:
|
|
gpio_set_value(MCFQSPI_CS1, cs_high);
|
|
break;
|
|
case 2:
|
|
gpio_set_value(MCFQSPI_CS2, cs_high);
|
|
break;
|
|
#ifdef MCFQSPI_CS3
|
|
case 3:
|
|
gpio_set_value(MCFQSPI_CS3, cs_high);
|
|
break;
|
|
#endif
|
|
}
|
|
}
|
|
|
|
static void mcf_cs_deselect(struct mcfqspi_cs_control *cs_control,
|
|
u8 chip_select, bool cs_high)
|
|
{
|
|
switch (chip_select) {
|
|
case 0:
|
|
gpio_set_value(MCFQSPI_CS0, !cs_high);
|
|
break;
|
|
case 1:
|
|
gpio_set_value(MCFQSPI_CS1, !cs_high);
|
|
break;
|
|
case 2:
|
|
gpio_set_value(MCFQSPI_CS2, !cs_high);
|
|
break;
|
|
#ifdef MCFQSPI_CS3
|
|
case 3:
|
|
gpio_set_value(MCFQSPI_CS3, !cs_high);
|
|
break;
|
|
#endif
|
|
}
|
|
}
|
|
|
|
static struct mcfqspi_cs_control mcf_cs_control = {
|
|
.setup = mcf_cs_setup,
|
|
.teardown = mcf_cs_teardown,
|
|
.select = mcf_cs_select,
|
|
.deselect = mcf_cs_deselect,
|
|
};
|
|
|
|
static struct mcfqspi_platform_data mcf_qspi_data = {
|
|
.bus_num = 0,
|
|
.num_chipselect = 4,
|
|
.cs_control = &mcf_cs_control,
|
|
};
|
|
|
|
static struct platform_device mcf_qspi = {
|
|
.name = "mcfqspi",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(mcf_qspi_resources),
|
|
.resource = mcf_qspi_resources,
|
|
.dev.platform_data = &mcf_qspi_data,
|
|
};
|
|
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
|
|
|
|
static struct platform_device *mcf_devices[] __initdata = {
|
|
&mcf_uart,
|
|
#if IS_ENABLED(CONFIG_FEC)
|
|
&mcf_fec0,
|
|
#ifdef MCFFEC_BASE1
|
|
&mcf_fec1,
|
|
#endif
|
|
#endif
|
|
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
|
|
&mcf_qspi,
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* Some ColdFire UARTs let you set the IRQ line to use.
|
|
*/
|
|
static void __init mcf_uart_set_irq(void)
|
|
{
|
|
#ifdef MCFUART_UIVR
|
|
/* UART0 interrupt setup */
|
|
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCFSIM_UART1ICR);
|
|
writeb(MCF_IRQ_UART0, MCFUART_BASE0 + MCFUART_UIVR);
|
|
mcf_mapirq2imr(MCF_IRQ_UART0, MCFINTC_UART0);
|
|
|
|
/* UART1 interrupt setup */
|
|
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCFSIM_UART2ICR);
|
|
writeb(MCF_IRQ_UART1, MCFUART_BASE1 + MCFUART_UIVR);
|
|
mcf_mapirq2imr(MCF_IRQ_UART1, MCFINTC_UART1);
|
|
#endif
|
|
}
|
|
|
|
static int __init mcf_init_devices(void)
|
|
{
|
|
mcf_uart_set_irq();
|
|
platform_add_devices(mcf_devices, ARRAY_SIZE(mcf_devices));
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(mcf_init_devices);
|
|
|