forked from luck/tmp_suning_uos_patched
d4fde568a3
Currently we have optimized hand-coded assembly checksum routines for big-endian 64-bit systems, but for little-endian we use the generic C routines. This modifies the optimized routines to work for little-endian. With this, we no longer need to enable CONFIG_GENERIC_CSUM. This also fixes a couple of comments in checksum_64.S so they accurately reflect what the associated instruction does. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> [mpe: Use the more common __BIG_ENDIAN__] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
432 lines
8.0 KiB
ArmAsm
432 lines
8.0 KiB
ArmAsm
/*
|
|
* This file contains assembly-language implementations
|
|
* of IP-style 1's complement checksum routines.
|
|
*
|
|
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* Severely hacked about by Paul Mackerras (paulus@cs.anu.edu.au).
|
|
*/
|
|
|
|
#include <linux/sys.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/export.h>
|
|
|
|
/*
|
|
* Computes the checksum of a memory block at buff, length len,
|
|
* and adds in "sum" (32-bit).
|
|
*
|
|
* __csum_partial(r3=buff, r4=len, r5=sum)
|
|
*/
|
|
_GLOBAL(__csum_partial)
|
|
addic r0,r5,0 /* clear carry */
|
|
|
|
srdi. r6,r4,3 /* less than 8 bytes? */
|
|
beq .Lcsum_tail_word
|
|
|
|
/*
|
|
* If only halfword aligned, align to a double word. Since odd
|
|
* aligned addresses should be rare and they would require more
|
|
* work to calculate the correct checksum, we ignore that case
|
|
* and take the potential slowdown of unaligned loads.
|
|
*/
|
|
rldicl. r6,r3,64-1,64-2 /* r6 = (r3 >> 1) & 0x3 */
|
|
beq .Lcsum_aligned
|
|
|
|
li r7,4
|
|
sub r6,r7,r6
|
|
mtctr r6
|
|
|
|
1:
|
|
lhz r6,0(r3) /* align to doubleword */
|
|
subi r4,r4,2
|
|
addi r3,r3,2
|
|
adde r0,r0,r6
|
|
bdnz 1b
|
|
|
|
.Lcsum_aligned:
|
|
/*
|
|
* We unroll the loop such that each iteration is 64 bytes with an
|
|
* entry and exit limb of 64 bytes, meaning a minimum size of
|
|
* 128 bytes.
|
|
*/
|
|
srdi. r6,r4,7
|
|
beq .Lcsum_tail_doublewords /* len < 128 */
|
|
|
|
srdi r6,r4,6
|
|
subi r6,r6,1
|
|
mtctr r6
|
|
|
|
stdu r1,-STACKFRAMESIZE(r1)
|
|
std r14,STK_REG(R14)(r1)
|
|
std r15,STK_REG(R15)(r1)
|
|
std r16,STK_REG(R16)(r1)
|
|
|
|
ld r6,0(r3)
|
|
ld r9,8(r3)
|
|
|
|
ld r10,16(r3)
|
|
ld r11,24(r3)
|
|
|
|
/*
|
|
* On POWER6 and POWER7 back to back adde instructions take 2 cycles
|
|
* because of the XER dependency. This means the fastest this loop can
|
|
* go is 16 cycles per iteration. The scheduling of the loop below has
|
|
* been shown to hit this on both POWER6 and POWER7.
|
|
*/
|
|
.align 5
|
|
2:
|
|
adde r0,r0,r6
|
|
ld r12,32(r3)
|
|
ld r14,40(r3)
|
|
|
|
adde r0,r0,r9
|
|
ld r15,48(r3)
|
|
ld r16,56(r3)
|
|
addi r3,r3,64
|
|
|
|
adde r0,r0,r10
|
|
|
|
adde r0,r0,r11
|
|
|
|
adde r0,r0,r12
|
|
|
|
adde r0,r0,r14
|
|
|
|
adde r0,r0,r15
|
|
ld r6,0(r3)
|
|
ld r9,8(r3)
|
|
|
|
adde r0,r0,r16
|
|
ld r10,16(r3)
|
|
ld r11,24(r3)
|
|
bdnz 2b
|
|
|
|
|
|
adde r0,r0,r6
|
|
ld r12,32(r3)
|
|
ld r14,40(r3)
|
|
|
|
adde r0,r0,r9
|
|
ld r15,48(r3)
|
|
ld r16,56(r3)
|
|
addi r3,r3,64
|
|
|
|
adde r0,r0,r10
|
|
adde r0,r0,r11
|
|
adde r0,r0,r12
|
|
adde r0,r0,r14
|
|
adde r0,r0,r15
|
|
adde r0,r0,r16
|
|
|
|
ld r14,STK_REG(R14)(r1)
|
|
ld r15,STK_REG(R15)(r1)
|
|
ld r16,STK_REG(R16)(r1)
|
|
addi r1,r1,STACKFRAMESIZE
|
|
|
|
andi. r4,r4,63
|
|
|
|
.Lcsum_tail_doublewords: /* Up to 127 bytes to go */
|
|
srdi. r6,r4,3
|
|
beq .Lcsum_tail_word
|
|
|
|
mtctr r6
|
|
3:
|
|
ld r6,0(r3)
|
|
addi r3,r3,8
|
|
adde r0,r0,r6
|
|
bdnz 3b
|
|
|
|
andi. r4,r4,7
|
|
|
|
.Lcsum_tail_word: /* Up to 7 bytes to go */
|
|
srdi. r6,r4,2
|
|
beq .Lcsum_tail_halfword
|
|
|
|
lwz r6,0(r3)
|
|
addi r3,r3,4
|
|
adde r0,r0,r6
|
|
subi r4,r4,4
|
|
|
|
.Lcsum_tail_halfword: /* Up to 3 bytes to go */
|
|
srdi. r6,r4,1
|
|
beq .Lcsum_tail_byte
|
|
|
|
lhz r6,0(r3)
|
|
addi r3,r3,2
|
|
adde r0,r0,r6
|
|
subi r4,r4,2
|
|
|
|
.Lcsum_tail_byte: /* Up to 1 byte to go */
|
|
andi. r6,r4,1
|
|
beq .Lcsum_finish
|
|
|
|
lbz r6,0(r3)
|
|
#ifdef __BIG_ENDIAN__
|
|
sldi r9,r6,8 /* Pad the byte out to 16 bits */
|
|
adde r0,r0,r9
|
|
#else
|
|
adde r0,r0,r6
|
|
#endif
|
|
|
|
.Lcsum_finish:
|
|
addze r0,r0 /* add in final carry */
|
|
rldicl r4,r0,32,0 /* fold two 32 bit halves together */
|
|
add r3,r4,r0
|
|
srdi r3,r3,32
|
|
blr
|
|
EXPORT_SYMBOL(__csum_partial)
|
|
|
|
|
|
.macro srcnr
|
|
100:
|
|
EX_TABLE(100b,.Lsrc_error_nr)
|
|
.endm
|
|
|
|
.macro source
|
|
150:
|
|
EX_TABLE(150b,.Lsrc_error)
|
|
.endm
|
|
|
|
.macro dstnr
|
|
200:
|
|
EX_TABLE(200b,.Ldest_error_nr)
|
|
.endm
|
|
|
|
.macro dest
|
|
250:
|
|
EX_TABLE(250b,.Ldest_error)
|
|
.endm
|
|
|
|
/*
|
|
* Computes the checksum of a memory block at src, length len,
|
|
* and adds in "sum" (32-bit), while copying the block to dst.
|
|
* If an access exception occurs on src or dst, it stores -EFAULT
|
|
* to *src_err or *dst_err respectively. The caller must take any action
|
|
* required in this case (zeroing memory, recalculating partial checksum etc).
|
|
*
|
|
* csum_partial_copy_generic(r3=src, r4=dst, r5=len, r6=sum, r7=src_err, r8=dst_err)
|
|
*/
|
|
_GLOBAL(csum_partial_copy_generic)
|
|
addic r0,r6,0 /* clear carry */
|
|
|
|
srdi. r6,r5,3 /* less than 8 bytes? */
|
|
beq .Lcopy_tail_word
|
|
|
|
/*
|
|
* If only halfword aligned, align to a double word. Since odd
|
|
* aligned addresses should be rare and they would require more
|
|
* work to calculate the correct checksum, we ignore that case
|
|
* and take the potential slowdown of unaligned loads.
|
|
*
|
|
* If the source and destination are relatively unaligned we only
|
|
* align the source. This keeps things simple.
|
|
*/
|
|
rldicl. r6,r3,64-1,64-2 /* r6 = (r3 >> 1) & 0x3 */
|
|
beq .Lcopy_aligned
|
|
|
|
li r9,4
|
|
sub r6,r9,r6
|
|
mtctr r6
|
|
|
|
1:
|
|
srcnr; lhz r6,0(r3) /* align to doubleword */
|
|
subi r5,r5,2
|
|
addi r3,r3,2
|
|
adde r0,r0,r6
|
|
dstnr; sth r6,0(r4)
|
|
addi r4,r4,2
|
|
bdnz 1b
|
|
|
|
.Lcopy_aligned:
|
|
/*
|
|
* We unroll the loop such that each iteration is 64 bytes with an
|
|
* entry and exit limb of 64 bytes, meaning a minimum size of
|
|
* 128 bytes.
|
|
*/
|
|
srdi. r6,r5,7
|
|
beq .Lcopy_tail_doublewords /* len < 128 */
|
|
|
|
srdi r6,r5,6
|
|
subi r6,r6,1
|
|
mtctr r6
|
|
|
|
stdu r1,-STACKFRAMESIZE(r1)
|
|
std r14,STK_REG(R14)(r1)
|
|
std r15,STK_REG(R15)(r1)
|
|
std r16,STK_REG(R16)(r1)
|
|
|
|
source; ld r6,0(r3)
|
|
source; ld r9,8(r3)
|
|
|
|
source; ld r10,16(r3)
|
|
source; ld r11,24(r3)
|
|
|
|
/*
|
|
* On POWER6 and POWER7 back to back adde instructions take 2 cycles
|
|
* because of the XER dependency. This means the fastest this loop can
|
|
* go is 16 cycles per iteration. The scheduling of the loop below has
|
|
* been shown to hit this on both POWER6 and POWER7.
|
|
*/
|
|
.align 5
|
|
2:
|
|
adde r0,r0,r6
|
|
source; ld r12,32(r3)
|
|
source; ld r14,40(r3)
|
|
|
|
adde r0,r0,r9
|
|
source; ld r15,48(r3)
|
|
source; ld r16,56(r3)
|
|
addi r3,r3,64
|
|
|
|
adde r0,r0,r10
|
|
dest; std r6,0(r4)
|
|
dest; std r9,8(r4)
|
|
|
|
adde r0,r0,r11
|
|
dest; std r10,16(r4)
|
|
dest; std r11,24(r4)
|
|
|
|
adde r0,r0,r12
|
|
dest; std r12,32(r4)
|
|
dest; std r14,40(r4)
|
|
|
|
adde r0,r0,r14
|
|
dest; std r15,48(r4)
|
|
dest; std r16,56(r4)
|
|
addi r4,r4,64
|
|
|
|
adde r0,r0,r15
|
|
source; ld r6,0(r3)
|
|
source; ld r9,8(r3)
|
|
|
|
adde r0,r0,r16
|
|
source; ld r10,16(r3)
|
|
source; ld r11,24(r3)
|
|
bdnz 2b
|
|
|
|
|
|
adde r0,r0,r6
|
|
source; ld r12,32(r3)
|
|
source; ld r14,40(r3)
|
|
|
|
adde r0,r0,r9
|
|
source; ld r15,48(r3)
|
|
source; ld r16,56(r3)
|
|
addi r3,r3,64
|
|
|
|
adde r0,r0,r10
|
|
dest; std r6,0(r4)
|
|
dest; std r9,8(r4)
|
|
|
|
adde r0,r0,r11
|
|
dest; std r10,16(r4)
|
|
dest; std r11,24(r4)
|
|
|
|
adde r0,r0,r12
|
|
dest; std r12,32(r4)
|
|
dest; std r14,40(r4)
|
|
|
|
adde r0,r0,r14
|
|
dest; std r15,48(r4)
|
|
dest; std r16,56(r4)
|
|
addi r4,r4,64
|
|
|
|
adde r0,r0,r15
|
|
adde r0,r0,r16
|
|
|
|
ld r14,STK_REG(R14)(r1)
|
|
ld r15,STK_REG(R15)(r1)
|
|
ld r16,STK_REG(R16)(r1)
|
|
addi r1,r1,STACKFRAMESIZE
|
|
|
|
andi. r5,r5,63
|
|
|
|
.Lcopy_tail_doublewords: /* Up to 127 bytes to go */
|
|
srdi. r6,r5,3
|
|
beq .Lcopy_tail_word
|
|
|
|
mtctr r6
|
|
3:
|
|
srcnr; ld r6,0(r3)
|
|
addi r3,r3,8
|
|
adde r0,r0,r6
|
|
dstnr; std r6,0(r4)
|
|
addi r4,r4,8
|
|
bdnz 3b
|
|
|
|
andi. r5,r5,7
|
|
|
|
.Lcopy_tail_word: /* Up to 7 bytes to go */
|
|
srdi. r6,r5,2
|
|
beq .Lcopy_tail_halfword
|
|
|
|
srcnr; lwz r6,0(r3)
|
|
addi r3,r3,4
|
|
adde r0,r0,r6
|
|
dstnr; stw r6,0(r4)
|
|
addi r4,r4,4
|
|
subi r5,r5,4
|
|
|
|
.Lcopy_tail_halfword: /* Up to 3 bytes to go */
|
|
srdi. r6,r5,1
|
|
beq .Lcopy_tail_byte
|
|
|
|
srcnr; lhz r6,0(r3)
|
|
addi r3,r3,2
|
|
adde r0,r0,r6
|
|
dstnr; sth r6,0(r4)
|
|
addi r4,r4,2
|
|
subi r5,r5,2
|
|
|
|
.Lcopy_tail_byte: /* Up to 1 byte to go */
|
|
andi. r6,r5,1
|
|
beq .Lcopy_finish
|
|
|
|
srcnr; lbz r6,0(r3)
|
|
#ifdef __BIG_ENDIAN__
|
|
sldi r9,r6,8 /* Pad the byte out to 16 bits */
|
|
adde r0,r0,r9
|
|
#else
|
|
adde r0,r0,r6
|
|
#endif
|
|
dstnr; stb r6,0(r4)
|
|
|
|
.Lcopy_finish:
|
|
addze r0,r0 /* add in final carry */
|
|
rldicl r4,r0,32,0 /* fold two 32 bit halves together */
|
|
add r3,r4,r0
|
|
srdi r3,r3,32
|
|
blr
|
|
|
|
.Lsrc_error:
|
|
ld r14,STK_REG(R14)(r1)
|
|
ld r15,STK_REG(R15)(r1)
|
|
ld r16,STK_REG(R16)(r1)
|
|
addi r1,r1,STACKFRAMESIZE
|
|
.Lsrc_error_nr:
|
|
cmpdi 0,r7,0
|
|
beqlr
|
|
li r6,-EFAULT
|
|
stw r6,0(r7)
|
|
blr
|
|
|
|
.Ldest_error:
|
|
ld r14,STK_REG(R14)(r1)
|
|
ld r15,STK_REG(R15)(r1)
|
|
ld r16,STK_REG(R16)(r1)
|
|
addi r1,r1,STACKFRAMESIZE
|
|
.Ldest_error_nr:
|
|
cmpdi 0,r8,0
|
|
beqlr
|
|
li r6,-EFAULT
|
|
stw r6,0(r8)
|
|
blr
|
|
EXPORT_SYMBOL(csum_partial_copy_generic)
|