kernel_optimize_test/arch/ppc/boot/simple/misc-ev64260.c
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00

55 lines
1.5 KiB
C

/*
* Host bridge init code for the Marvell/Galileo EV-64260-BP evaluation board
* with a GT64260 onboard.
*
* Author: Mark A. Greer <mgreer@mvista.com>
*
* 2001 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/types.h>
#include <asm/reg.h>
#include <asm/io.h>
#include <asm/mv64x60_defs.h>
#include <platforms/ev64260.h>
#ifdef CONFIG_SERIAL_MPSC_CONSOLE
extern u32 mv64x60_console_baud;
extern u32 mv64x60_mpsc_clk_src;
extern u32 mv64x60_mpsc_clk_freq;
#endif
void
mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
{
u32 p, v;
/* DINK doesn't enable 745x timebase, so enable here (Adrian Cox) */
p = mfspr(SPRN_PVR);
p >>= 16;
/* Reasonable SWAG at a 745x PVR value */
if (((p & 0xfff0) == 0x8000) && (p != 0x800c)) {
v = mfspr(SPRN_HID0);
v |= HID0_TBEN;
mtspr(SPRN_HID0, v);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
/*
* Change device bus 2 window so that bootoader can do I/O thru
* 8250/16550 UART that's mapped in that window.
*/
out_le32(new_base + MV64x60_CPU2DEV_2_BASE, EV64260_UART_BASE >> 20);
out_le32(new_base + MV64x60_CPU2DEV_2_SIZE, EV64260_UART_END >> 20);
__asm__ __volatile__("sync");
#elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
mv64x60_console_baud = EV64260_DEFAULT_BAUD;
mv64x60_mpsc_clk_src = EV64260_MPSC_CLK_SRC;
mv64x60_mpsc_clk_freq = EV64260_MPSC_CLK_FREQ;
#endif
}