kernel_optimize_test/drivers/media/platform/Makefile
Maxime Ripard 1fc3b37f34 media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver
The Cadence CSI-2 RX Controller is an hardware block meant to be used as a
bridge between a CSI-2 bus and pixel grabbers.

It supports operating with internal or external D-PHY, with up to 4 lanes,
or without any D-PHY. The current code only supports the latter case.

It also support dynamic mapping of the CSI-2 virtual channels to the
associated pixel grabbers, but that isn't allowed at the moment either.

Acked-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-16 11:12:21 -04:00

96 lines
2.5 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0
#
# Makefile for the video capture/playback device drivers.
#
obj-$(CONFIG_VIDEO_CADENCE) += cadence/
obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o
obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/
obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/
obj-$(CONFIG_VIDEO_OMAP3) += omap3isp/
obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o
obj-$(CONFIG_VIDEO_VIU) += fsl-viu.o
obj-$(CONFIG_VIDEO_VIMC) += vimc/
obj-$(CONFIG_VIDEO_VIVID) += vivid/
obj-$(CONFIG_VIDEO_VIM2M) += vim2m.o
obj-$(CONFIG_VIDEO_TI_VPE) += ti-vpe/
obj-$(CONFIG_VIDEO_TI_CAL) += ti-vpe/
obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o
obj-$(CONFIG_VIDEO_CODA) += coda/
obj-$(CONFIG_VIDEO_SH_VEU) += sh_veu.o
obj-$(CONFIG_CEC_GPIO) += cec-gpio/
obj-$(CONFIG_VIDEO_MEM2MEM_DEINTERLACE) += m2m-deinterlace.o
obj-$(CONFIG_VIDEO_MUX) += video-mux.o
obj-$(CONFIG_VIDEO_S3C_CAMIF) += s3c-camif/
obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS) += exynos4-is/
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) += s5p-jpeg/
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) += s5p-mfc/
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_G2D) += s5p-g2d/
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_CEC) += s5p-cec/
obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC) += exynos-gsc/
obj-$(CONFIG_VIDEO_STI_BDISP) += sti/bdisp/
obj-$(CONFIG_VIDEO_STI_HVA) += sti/hva/
obj-$(CONFIG_DVB_C8SECTPFE) += sti/c8sectpfe/
obj-$(CONFIG_VIDEO_STI_HDMI_CEC) += sti/cec/
obj-$(CONFIG_VIDEO_STI_DELTA) += sti/delta/
obj-$(CONFIG_VIDEO_TEGRA_HDMI_CEC) += tegra-cec/
obj-y += stm32/
obj-y += davinci/
obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o
obj-$(CONFIG_SOC_CAMERA) += soc_camera/
obj-$(CONFIG_VIDEO_RCAR_DRIF) += rcar_drif.o
obj-$(CONFIG_VIDEO_RENESAS_CEU) += renesas-ceu.o
obj-$(CONFIG_VIDEO_RENESAS_FCP) += rcar-fcp.o
obj-$(CONFIG_VIDEO_RENESAS_FDP1) += rcar_fdp1.o
obj-$(CONFIG_VIDEO_RENESAS_JPU) += rcar_jpu.o
obj-$(CONFIG_VIDEO_RENESAS_VSP1) += vsp1/
obj-$(CONFIG_VIDEO_ROCKCHIP_RGA) += rockchip/rga/
obj-y += omap/
obj-$(CONFIG_VIDEO_AM437X_VPFE) += am437x/
obj-$(CONFIG_VIDEO_XILINX) += xilinx/
obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vin/
obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel/
obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel/
obj-$(CONFIG_VIDEO_STM32_DCMI) += stm32/
obj-$(CONFIG_VIDEO_MEDIATEK_VPU) += mtk-vpu/
obj-$(CONFIG_VIDEO_MEDIATEK_VCODEC) += mtk-vcodec/
obj-$(CONFIG_VIDEO_MEDIATEK_MDP) += mtk-mdp/
obj-$(CONFIG_VIDEO_MEDIATEK_JPEG) += mtk-jpeg/
obj-$(CONFIG_VIDEO_QCOM_CAMSS) += qcom/camss-8x16/
obj-$(CONFIG_VIDEO_QCOM_VENUS) += qcom/venus/
obj-y += meson/