forked from luck/tmp_suning_uos_patched
1ff84890b6
Problems have been reported [1], so disable prefetch/burst, to be on the safe side. [1] http://www.mail-archive.com/linux-pcmcia@lists.infradead.org/msg02048.html Signed-off-by: Tomáš Kováčik <nail@nodomain.sk> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
193 lines
6.0 KiB
C
193 lines
6.0 KiB
C
/*
|
|
* o2micro.h 1.13 1999/10/25 20:03:34
|
|
*
|
|
* The contents of this file are subject to the Mozilla Public License
|
|
* Version 1.1 (the "License"); you may not use this file except in
|
|
* compliance with the License. You may obtain a copy of the License
|
|
* at http://www.mozilla.org/MPL/
|
|
*
|
|
* Software distributed under the License is distributed on an "AS IS"
|
|
* basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
|
|
* the License for the specific language governing rights and
|
|
* limitations under the License.
|
|
*
|
|
* The initial developer of the original code is David A. Hinds
|
|
* <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
|
|
* are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
|
|
*
|
|
* Alternatively, the contents of this file may be used under the
|
|
* terms of the GNU General Public License version 2 (the "GPL"), in which
|
|
* case the provisions of the GPL are applicable instead of the
|
|
* above. If you wish to allow the use of your version of this file
|
|
* only under the terms of the GPL and not to allow others to use
|
|
* your version of this file under the MPL, indicate your decision by
|
|
* deleting the provisions above and replace them with the notice and
|
|
* other provisions required by the GPL. If you do not delete the
|
|
* provisions above, a recipient may use your version of this file
|
|
* under either the MPL or the GPL.
|
|
*/
|
|
|
|
#ifndef _LINUX_O2MICRO_H
|
|
#define _LINUX_O2MICRO_H
|
|
|
|
#ifndef PCI_VENDOR_ID_O2
|
|
#define PCI_VENDOR_ID_O2 0x1217
|
|
#endif
|
|
#ifndef PCI_DEVICE_ID_O2_6729
|
|
#define PCI_DEVICE_ID_O2_6729 0x6729
|
|
#endif
|
|
#ifndef PCI_DEVICE_ID_O2_6730
|
|
#define PCI_DEVICE_ID_O2_6730 0x673a
|
|
#endif
|
|
#ifndef PCI_DEVICE_ID_O2_6832
|
|
#define PCI_DEVICE_ID_O2_6832 0x6832
|
|
#endif
|
|
#ifndef PCI_DEVICE_ID_O2_6836
|
|
#define PCI_DEVICE_ID_O2_6836 0x6836
|
|
#endif
|
|
#ifndef PCI_DEVICE_ID_O2_6812
|
|
#define PCI_DEVICE_ID_O2_6812 0x6872
|
|
#endif
|
|
#ifndef PCI_DEVICE_ID_O2_6933
|
|
#define PCI_DEVICE_ID_O2_6933 0x6933
|
|
#endif
|
|
|
|
/* Additional PCI configuration registers */
|
|
|
|
#define O2_MUX_CONTROL 0x90 /* 32 bit */
|
|
#define O2_MUX_RING_OUT 0x0000000f
|
|
#define O2_MUX_SKTB_ACTV 0x000000f0
|
|
#define O2_MUX_SCTA_ACTV_ENA 0x00000100
|
|
#define O2_MUX_SCTB_ACTV_ENA 0x00000200
|
|
#define O2_MUX_SER_IRQ_ROUTE 0x0000e000
|
|
#define O2_MUX_SER_PCI 0x00010000
|
|
|
|
#define O2_MUX_SKTA_TURBO 0x000c0000 /* for 6833, 6860 */
|
|
#define O2_MUX_SKTB_TURBO 0x00300000
|
|
#define O2_MUX_AUX_VCC_3V 0x00400000
|
|
#define O2_MUX_PCI_VCC_5V 0x00800000
|
|
#define O2_MUX_PME_MUX 0x0f000000
|
|
|
|
/* Additional ExCA registers */
|
|
|
|
#define O2_MODE_A 0x38
|
|
#define O2_MODE_A_2 0x26 /* for 6833B, 6860C */
|
|
#define O2_MODE_A_CD_PULSE 0x04
|
|
#define O2_MODE_A_SUSP_EDGE 0x08
|
|
#define O2_MODE_A_HOST_SUSP 0x10
|
|
#define O2_MODE_A_PWR_MASK 0x60
|
|
#define O2_MODE_A_QUIET 0x80
|
|
|
|
#define O2_MODE_B 0x39
|
|
#define O2_MODE_B_2 0x2e /* for 6833B, 6860C */
|
|
#define O2_MODE_B_IDENT 0x03
|
|
#define O2_MODE_B_ID_BSTEP 0x00
|
|
#define O2_MODE_B_ID_CSTEP 0x01
|
|
#define O2_MODE_B_ID_O2 0x02
|
|
#define O2_MODE_B_VS1 0x04
|
|
#define O2_MODE_B_VS2 0x08
|
|
#define O2_MODE_B_IRQ15_RI 0x80
|
|
|
|
#define O2_MODE_C 0x3a
|
|
#define O2_MODE_C_DREQ_MASK 0x03
|
|
#define O2_MODE_C_DREQ_INPACK 0x01
|
|
#define O2_MODE_C_DREQ_WP 0x02
|
|
#define O2_MODE_C_DREQ_BVD2 0x03
|
|
#define O2_MODE_C_ZVIDEO 0x08
|
|
#define O2_MODE_C_IREQ_SEL 0x30
|
|
#define O2_MODE_C_MGMT_SEL 0xc0
|
|
|
|
#define O2_MODE_D 0x3b
|
|
#define O2_MODE_D_IRQ_MODE 0x03
|
|
#define O2_MODE_D_PCI_CLKRUN 0x04
|
|
#define O2_MODE_D_CB_CLKRUN 0x08
|
|
#define O2_MODE_D_SKT_ACTV 0x20
|
|
#define O2_MODE_D_PCI_FIFO 0x40 /* for OZ6729, OZ6730 */
|
|
#define O2_MODE_D_W97_IRQ 0x40
|
|
#define O2_MODE_D_ISA_IRQ 0x80
|
|
|
|
#define O2_MHPG_DMA 0x3c
|
|
#define O2_MHPG_CHANNEL 0x07
|
|
#define O2_MHPG_CINT_ENA 0x08
|
|
#define O2_MHPG_CSC_ENA 0x10
|
|
|
|
#define O2_FIFO_ENA 0x3d
|
|
#define O2_FIFO_ZVIDEO_3 0x08
|
|
#define O2_FIFO_PCI_FIFO 0x10
|
|
#define O2_FIFO_POSTWR 0x40
|
|
#define O2_FIFO_BUFFER 0x80
|
|
|
|
#define O2_MODE_E 0x3e
|
|
#define O2_MODE_E_MHPG_DMA 0x01
|
|
#define O2_MODE_E_SPKR_OUT 0x02
|
|
#define O2_MODE_E_LED_OUT 0x08
|
|
#define O2_MODE_E_SKTA_ACTV 0x10
|
|
|
|
#define O2_RESERVED1 0x94
|
|
#define O2_RESERVED2 0xD4
|
|
#define O2_RES_READ_PREFETCH 0x02
|
|
#define O2_RES_WRITE_BURST 0x08
|
|
|
|
static int o2micro_override(struct yenta_socket *socket)
|
|
{
|
|
/*
|
|
* 'reserved' register at 0x94/D4. allows setting read prefetch and write
|
|
* bursting. read prefetching for example makes the RME Hammerfall DSP
|
|
* working. for some bridges it is at 0x94, for others at 0xD4. it's
|
|
* ok to write to both registers on all O2 bridges.
|
|
* from Eric Still, 02Micro.
|
|
*/
|
|
u8 a, b;
|
|
|
|
if (PCI_FUNC(socket->dev->devfn) == 0) {
|
|
a = config_readb(socket, O2_RESERVED1);
|
|
b = config_readb(socket, O2_RESERVED2);
|
|
|
|
dev_printk(KERN_INFO, &socket->dev->dev,
|
|
"O2: res at 0x94/0xD4: %02x/%02x\n", a, b);
|
|
|
|
switch (socket->dev->device) {
|
|
/*
|
|
* older bridges have problems with both read prefetch and write
|
|
* bursting depending on the combination of the chipset, bridge
|
|
* and the cardbus card. so disable them to be on the safe side.
|
|
*/
|
|
case PCI_DEVICE_ID_O2_6729:
|
|
case PCI_DEVICE_ID_O2_6730:
|
|
case PCI_DEVICE_ID_O2_6812:
|
|
case PCI_DEVICE_ID_O2_6832:
|
|
case PCI_DEVICE_ID_O2_6836:
|
|
case PCI_DEVICE_ID_O2_6933:
|
|
dev_printk(KERN_INFO, &socket->dev->dev,
|
|
"Yenta O2: old bridge, disabling read "
|
|
"prefetch/write burst\n");
|
|
config_writeb(socket, O2_RESERVED1,
|
|
a & ~(O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST));
|
|
config_writeb(socket, O2_RESERVED2,
|
|
b & ~(O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST));
|
|
break;
|
|
|
|
default:
|
|
dev_printk(KERN_INFO , &socket->dev->dev,
|
|
"O2: enabling read prefetch/write burst\n");
|
|
config_writeb(socket, O2_RESERVED1,
|
|
a | O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST);
|
|
config_writeb(socket, O2_RESERVED2,
|
|
b | O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void o2micro_restore_state(struct yenta_socket *socket)
|
|
{
|
|
/*
|
|
* as long as read prefetch is the only thing in
|
|
* o2micro_override, it's safe to call it from here
|
|
*/
|
|
o2micro_override(socket);
|
|
}
|
|
|
|
#endif /* _LINUX_O2MICRO_H */
|