forked from luck/tmp_suning_uos_patched
6dd9344cfc
The SmartMIPS ASE specifies how Read Inhibit (RI) and eXecute Inhibit
(XI) bits in the page tables work. The upper two bits of EntryLo{0,1}
are RI and XI when the feature is enabled in the PageGrain register.
SmartMIPS only covers 32-bit systems. Cavium Octeon+ extends this to
64-bit systems by continuing to place the RI and XI bits in the top of
EntryLo even when EntryLo is 64-bits wide.
Because we need to carry the RI and XI bits in the PTE, the layout of
the PTE is changed. There is a two instruction overhead in the TLB
refill hot path to get the EntryLo bits into the proper position.
Also the TLB load exception has to probe the TLB to check if RI or XI
caused the exception.
Also of note is that the layout of the PTE bits is done at compile and
runtime rather than statically. In the 32-bit case this allows for
the same number of PFN bits as before the patch as the _PAGE_HUGE is
not supported in 32-bit kernels (we have _PAGE_NO_EXEC and
_PAGE_NO_READ instead of _PAGE_READ and _PAGE_HUGE).
The patch is tested on Cavium Octeon+, but should also work on 32-bit
systems with the Smart-MIPS ASE.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/952/
Patchwork: http://patchwork.linux-mips.org/patch/956/
Patchwork: http://patchwork.linux-mips.org/patch/962/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
276 lines
6.9 KiB
C
276 lines
6.9 KiB
C
/*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
* Copyright (C) 1995 - 2000 by Ralf Baechle
|
|
*/
|
|
#include <linux/signal.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/types.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/mman.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/vt_kern.h> /* For unblank_screen() */
|
|
#include <linux/module.h>
|
|
|
|
#include <asm/branch.h>
|
|
#include <asm/mmu_context.h>
|
|
#include <asm/system.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/ptrace.h>
|
|
#include <asm/highmem.h> /* For VMALLOC_END */
|
|
|
|
/*
|
|
* This routine handles page faults. It determines the address,
|
|
* and the problem, and then passes it off to one of the appropriate
|
|
* routines.
|
|
*/
|
|
asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
|
|
unsigned long address)
|
|
{
|
|
struct vm_area_struct * vma = NULL;
|
|
struct task_struct *tsk = current;
|
|
struct mm_struct *mm = tsk->mm;
|
|
const int field = sizeof(unsigned long) * 2;
|
|
siginfo_t info;
|
|
int fault;
|
|
|
|
#if 0
|
|
printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(),
|
|
current->comm, current->pid, field, address, write,
|
|
field, regs->cp0_epc);
|
|
#endif
|
|
|
|
info.si_code = SEGV_MAPERR;
|
|
|
|
/*
|
|
* We fault-in kernel-space virtual memory on-demand. The
|
|
* 'reference' page table is init_mm.pgd.
|
|
*
|
|
* NOTE! We MUST NOT take any locks for this case. We may
|
|
* be in an interrupt or a critical region, and should
|
|
* only copy the information from the master page table,
|
|
* nothing more.
|
|
*/
|
|
#ifdef CONFIG_64BIT
|
|
# define VMALLOC_FAULT_TARGET no_context
|
|
#else
|
|
# define VMALLOC_FAULT_TARGET vmalloc_fault
|
|
#endif
|
|
|
|
if (unlikely(address >= VMALLOC_START && address <= VMALLOC_END))
|
|
goto VMALLOC_FAULT_TARGET;
|
|
#ifdef MODULE_START
|
|
if (unlikely(address >= MODULE_START && address < MODULE_END))
|
|
goto VMALLOC_FAULT_TARGET;
|
|
#endif
|
|
|
|
/*
|
|
* If we're in an interrupt or have no user
|
|
* context, we must not take the fault..
|
|
*/
|
|
if (in_atomic() || !mm)
|
|
goto bad_area_nosemaphore;
|
|
|
|
down_read(&mm->mmap_sem);
|
|
vma = find_vma(mm, address);
|
|
if (!vma)
|
|
goto bad_area;
|
|
if (vma->vm_start <= address)
|
|
goto good_area;
|
|
if (!(vma->vm_flags & VM_GROWSDOWN))
|
|
goto bad_area;
|
|
if (expand_stack(vma, address))
|
|
goto bad_area;
|
|
/*
|
|
* Ok, we have a good vm_area for this memory access, so
|
|
* we can handle it..
|
|
*/
|
|
good_area:
|
|
info.si_code = SEGV_ACCERR;
|
|
|
|
if (write) {
|
|
if (!(vma->vm_flags & VM_WRITE))
|
|
goto bad_area;
|
|
} else {
|
|
if (kernel_uses_smartmips_rixi) {
|
|
if (address == regs->cp0_epc && !(vma->vm_flags & VM_EXEC)) {
|
|
#if 0
|
|
pr_notice("Cpu%d[%s:%d:%0*lx:%ld:%0*lx] XI violation\n",
|
|
raw_smp_processor_id(),
|
|
current->comm, current->pid,
|
|
field, address, write,
|
|
field, regs->cp0_epc);
|
|
#endif
|
|
goto bad_area;
|
|
}
|
|
if (!(vma->vm_flags & VM_READ)) {
|
|
#if 0
|
|
pr_notice("Cpu%d[%s:%d:%0*lx:%ld:%0*lx] RI violation\n",
|
|
raw_smp_processor_id(),
|
|
current->comm, current->pid,
|
|
field, address, write,
|
|
field, regs->cp0_epc);
|
|
#endif
|
|
goto bad_area;
|
|
}
|
|
} else {
|
|
if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)))
|
|
goto bad_area;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If for any reason at all we couldn't handle the fault,
|
|
* make sure we exit gracefully rather than endlessly redo
|
|
* the fault.
|
|
*/
|
|
fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
|
|
if (unlikely(fault & VM_FAULT_ERROR)) {
|
|
if (fault & VM_FAULT_OOM)
|
|
goto out_of_memory;
|
|
else if (fault & VM_FAULT_SIGBUS)
|
|
goto do_sigbus;
|
|
BUG();
|
|
}
|
|
if (fault & VM_FAULT_MAJOR)
|
|
tsk->maj_flt++;
|
|
else
|
|
tsk->min_flt++;
|
|
|
|
up_read(&mm->mmap_sem);
|
|
return;
|
|
|
|
/*
|
|
* Something tried to access memory that isn't in our memory map..
|
|
* Fix it, but check if it's kernel or user first..
|
|
*/
|
|
bad_area:
|
|
up_read(&mm->mmap_sem);
|
|
|
|
bad_area_nosemaphore:
|
|
/* User mode accesses just cause a SIGSEGV */
|
|
if (user_mode(regs)) {
|
|
tsk->thread.cp0_badvaddr = address;
|
|
tsk->thread.error_code = write;
|
|
#if 0
|
|
printk("do_page_fault() #2: sending SIGSEGV to %s for "
|
|
"invalid %s\n%0*lx (epc == %0*lx, ra == %0*lx)\n",
|
|
tsk->comm,
|
|
write ? "write access to" : "read access from",
|
|
field, address,
|
|
field, (unsigned long) regs->cp0_epc,
|
|
field, (unsigned long) regs->regs[31]);
|
|
#endif
|
|
info.si_signo = SIGSEGV;
|
|
info.si_errno = 0;
|
|
/* info.si_code has been set above */
|
|
info.si_addr = (void __user *) address;
|
|
force_sig_info(SIGSEGV, &info, tsk);
|
|
return;
|
|
}
|
|
|
|
no_context:
|
|
/* Are we prepared to handle this kernel fault? */
|
|
if (fixup_exception(regs)) {
|
|
current->thread.cp0_baduaddr = address;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Oops. The kernel tried to access some bad page. We'll have to
|
|
* terminate things with extreme prejudice.
|
|
*/
|
|
bust_spinlocks(1);
|
|
|
|
printk(KERN_ALERT "CPU %d Unable to handle kernel paging request at "
|
|
"virtual address %0*lx, epc == %0*lx, ra == %0*lx\n",
|
|
raw_smp_processor_id(), field, address, field, regs->cp0_epc,
|
|
field, regs->regs[31]);
|
|
die("Oops", regs);
|
|
|
|
out_of_memory:
|
|
/*
|
|
* We ran out of memory, call the OOM killer, and return the userspace
|
|
* (which will retry the fault, or kill us if we got oom-killed).
|
|
*/
|
|
up_read(&mm->mmap_sem);
|
|
pagefault_out_of_memory();
|
|
return;
|
|
|
|
do_sigbus:
|
|
up_read(&mm->mmap_sem);
|
|
|
|
/* Kernel mode? Handle exceptions or die */
|
|
if (!user_mode(regs))
|
|
goto no_context;
|
|
else
|
|
/*
|
|
* Send a sigbus, regardless of whether we were in kernel
|
|
* or user mode.
|
|
*/
|
|
#if 0
|
|
printk("do_page_fault() #3: sending SIGBUS to %s for "
|
|
"invalid %s\n%0*lx (epc == %0*lx, ra == %0*lx)\n",
|
|
tsk->comm,
|
|
write ? "write access to" : "read access from",
|
|
field, address,
|
|
field, (unsigned long) regs->cp0_epc,
|
|
field, (unsigned long) regs->regs[31]);
|
|
#endif
|
|
tsk->thread.cp0_badvaddr = address;
|
|
info.si_signo = SIGBUS;
|
|
info.si_errno = 0;
|
|
info.si_code = BUS_ADRERR;
|
|
info.si_addr = (void __user *) address;
|
|
force_sig_info(SIGBUS, &info, tsk);
|
|
|
|
return;
|
|
#ifndef CONFIG_64BIT
|
|
vmalloc_fault:
|
|
{
|
|
/*
|
|
* Synchronize this task's top level page-table
|
|
* with the 'reference' page table.
|
|
*
|
|
* Do _not_ use "tsk" here. We might be inside
|
|
* an interrupt in the middle of a task switch..
|
|
*/
|
|
int offset = __pgd_offset(address);
|
|
pgd_t *pgd, *pgd_k;
|
|
pud_t *pud, *pud_k;
|
|
pmd_t *pmd, *pmd_k;
|
|
pte_t *pte_k;
|
|
|
|
pgd = (pgd_t *) pgd_current[raw_smp_processor_id()] + offset;
|
|
pgd_k = init_mm.pgd + offset;
|
|
|
|
if (!pgd_present(*pgd_k))
|
|
goto no_context;
|
|
set_pgd(pgd, *pgd_k);
|
|
|
|
pud = pud_offset(pgd, address);
|
|
pud_k = pud_offset(pgd_k, address);
|
|
if (!pud_present(*pud_k))
|
|
goto no_context;
|
|
|
|
pmd = pmd_offset(pud, address);
|
|
pmd_k = pmd_offset(pud_k, address);
|
|
if (!pmd_present(*pmd_k))
|
|
goto no_context;
|
|
set_pmd(pmd, *pmd_k);
|
|
|
|
pte_k = pte_offset_kernel(pmd_k, address);
|
|
if (!pte_present(*pte_k))
|
|
goto no_context;
|
|
return;
|
|
}
|
|
#endif
|
|
}
|