forked from luck/tmp_suning_uos_patched
de854e54d7
The wf_sensor_ops structures are only stored in the ops field of a
wf_sensor structure, which is declared as const. Thus the
wf_sensor_ops structures themselves can be const.
Done with the help of Coccinelle.
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct wf_sensor_ops i@p = { ... };
@ok1@
identifier r.i;
struct wf_sensor s;
position p;
@@
s.ops = &i@p
@ok2@
identifier r.i;
struct wf_sat_sensor s;
position p;
@@
s.sens.ops = &i@p
@bad@
position p != {r.p,ok1.p,ok2.p};
identifier r.i;
struct wf_sensor_ops e;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct wf_sensor_ops i = { ... };
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
183 lines
4.0 KiB
C
183 lines
4.0 KiB
C
/*
|
|
* Windfarm PowerMac thermal control. LM75 sensor
|
|
*
|
|
* (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
|
|
* <benh@kernel.crashing.org>
|
|
*
|
|
* Released under the term of the GNU GPL v2.
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/i2c.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/io.h>
|
|
#include <asm/sections.h>
|
|
#include <asm/pmac_low_i2c.h>
|
|
|
|
#include "windfarm.h"
|
|
|
|
#define VERSION "1.0"
|
|
|
|
#undef DEBUG
|
|
|
|
#ifdef DEBUG
|
|
#define DBG(args...) printk(args)
|
|
#else
|
|
#define DBG(args...) do { } while(0)
|
|
#endif
|
|
|
|
struct wf_lm75_sensor {
|
|
int ds1775 : 1;
|
|
int inited : 1;
|
|
struct i2c_client *i2c;
|
|
struct wf_sensor sens;
|
|
};
|
|
#define wf_to_lm75(c) container_of(c, struct wf_lm75_sensor, sens)
|
|
|
|
static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
|
|
{
|
|
struct wf_lm75_sensor *lm = wf_to_lm75(sr);
|
|
s32 data;
|
|
|
|
if (lm->i2c == NULL)
|
|
return -ENODEV;
|
|
|
|
/* Init chip if necessary */
|
|
if (!lm->inited) {
|
|
u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(lm->i2c, 1);
|
|
|
|
DBG("wf_lm75: Initializing %s, cfg was: %02x\n",
|
|
sr->name, cfg);
|
|
|
|
/* clear shutdown bit, keep other settings as left by
|
|
* the firmware for now
|
|
*/
|
|
cfg_new = cfg & ~0x01;
|
|
i2c_smbus_write_byte_data(lm->i2c, 1, cfg_new);
|
|
lm->inited = 1;
|
|
|
|
/* If we just powered it up, let's wait 200 ms */
|
|
msleep(200);
|
|
}
|
|
|
|
/* Read temperature register */
|
|
data = (s32)le16_to_cpu(i2c_smbus_read_word_data(lm->i2c, 0));
|
|
data <<= 8;
|
|
*value = data;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wf_lm75_release(struct wf_sensor *sr)
|
|
{
|
|
struct wf_lm75_sensor *lm = wf_to_lm75(sr);
|
|
|
|
kfree(lm);
|
|
}
|
|
|
|
static const struct wf_sensor_ops wf_lm75_ops = {
|
|
.get_value = wf_lm75_get,
|
|
.release = wf_lm75_release,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int wf_lm75_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct wf_lm75_sensor *lm;
|
|
int rc, ds1775 = id->driver_data;
|
|
const char *name, *loc;
|
|
|
|
DBG("wf_lm75: creating %s device at address 0x%02x\n",
|
|
ds1775 ? "ds1775" : "lm75", client->addr);
|
|
|
|
loc = of_get_property(client->dev.of_node, "hwsensor-location", NULL);
|
|
if (!loc) {
|
|
dev_warn(&client->dev, "Missing hwsensor-location property!\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
/* Usual rant about sensor names not beeing very consistent in
|
|
* the device-tree, oh well ...
|
|
* Add more entries below as you deal with more setups
|
|
*/
|
|
if (!strcmp(loc, "Hard drive") || !strcmp(loc, "DRIVE BAY"))
|
|
name = "hd-temp";
|
|
else if (!strcmp(loc, "Incoming Air Temp"))
|
|
name = "incoming-air-temp";
|
|
else if (!strcmp(loc, "ODD Temp"))
|
|
name = "optical-drive-temp";
|
|
else if (!strcmp(loc, "HD Temp"))
|
|
name = "hard-drive-temp";
|
|
else if (!strcmp(loc, "PCI SLOTS"))
|
|
name = "slots-temp";
|
|
else if (!strcmp(loc, "CPU A INLET"))
|
|
name = "cpu-inlet-temp-0";
|
|
else if (!strcmp(loc, "CPU B INLET"))
|
|
name = "cpu-inlet-temp-1";
|
|
else
|
|
return -ENXIO;
|
|
|
|
|
|
lm = kzalloc(sizeof(struct wf_lm75_sensor), GFP_KERNEL);
|
|
if (lm == NULL)
|
|
return -ENODEV;
|
|
|
|
lm->inited = 0;
|
|
lm->ds1775 = ds1775;
|
|
lm->i2c = client;
|
|
lm->sens.name = name;
|
|
lm->sens.ops = &wf_lm75_ops;
|
|
i2c_set_clientdata(client, lm);
|
|
|
|
rc = wf_register_sensor(&lm->sens);
|
|
if (rc)
|
|
kfree(lm);
|
|
return rc;
|
|
}
|
|
|
|
static int wf_lm75_remove(struct i2c_client *client)
|
|
{
|
|
struct wf_lm75_sensor *lm = i2c_get_clientdata(client);
|
|
|
|
DBG("wf_lm75: i2c detatch called for %s\n", lm->sens.name);
|
|
|
|
/* Mark client detached */
|
|
lm->i2c = NULL;
|
|
|
|
/* release sensor */
|
|
wf_unregister_sensor(&lm->sens);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id wf_lm75_id[] = {
|
|
{ "MAC,lm75", 0 },
|
|
{ "MAC,ds1775", 1 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, wf_lm75_id);
|
|
|
|
static struct i2c_driver wf_lm75_driver = {
|
|
.driver = {
|
|
.name = "wf_lm75",
|
|
},
|
|
.probe = wf_lm75_probe,
|
|
.remove = wf_lm75_remove,
|
|
.id_table = wf_lm75_id,
|
|
};
|
|
|
|
module_i2c_driver(wf_lm75_driver);
|
|
|
|
MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
|
|
MODULE_DESCRIPTION("LM75 sensor objects for PowerMacs thermal control");
|
|
MODULE_LICENSE("GPL");
|
|
|