AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
7d5e324573
kernel_optimize_test/drivers/mtd/nand/gpmi-nand
History
Lothar Waßmann 2a500afe1e mtd: gpmi: make blockmark swapping optional 
With a flash-based BBT there is no reason to move the Factory Bad
Block Marker from the data area buffer (to where it is mapped by the
GPMI NAND controller) to the OOB buffer. Thus, make this feature
configurable via DT. This is required for the Ka-Ro electronics
platforms.

In the original code 'this->swap_block_mark' was synonymous with
'!GPMI_IS_MX23()', so use the latter at the relevant places.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-27 22:06:31 -07:00
..
bch-regs.h mtd: gpmi: add gpmi support for imx6sx 2014-05-28 16:02:16 -07:00
gpmi-lib.c mtd: gpmi: add gpmi support for imx6sx 2014-05-28 16:02:16 -07:00
gpmi-nand.c mtd: gpmi: make blockmark swapping optional 2014-07-27 22:06:31 -07:00
gpmi-nand.h mtd: gpmi: add gpmi support for imx6sx 2014-05-28 16:02:16 -07:00
gpmi-regs.h mtd: gpmi: decouple the chip select from the DMA channel 2013-11-06 23:33:01 -08:00
Makefile