forked from luck/tmp_suning_uos_patched
81d68a96a3
This patch adds latency tracing for critical timings
(how long interrupts are disabled for).
"irqsoff" is added to /debugfs/tracing/available_tracers
Note:
tracing_max_latency
also holds the max latency for irqsoff (in usecs).
(default to large number so one must start latency tracing)
tracing_thresh
threshold (in usecs) to always print out if irqs off
is detected to be longer than stated here.
If irq_thresh is non-zero, then max_irq_latency
is ignored.
Here's an example of a trace with ftrace_enabled = 0
=======
preemption latency trace v1.1.5 on 2.6.24-rc7
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
latency: 100 us, #3/3, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2)
-----------------
| task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
=> started at: _spin_lock_irqsave+0x2a/0xb7
=> ended at: _spin_unlock_irqrestore+0x32/0x5f
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| /
||||| delay
cmd pid ||||| time | caller
\ / ||||| \ | /
swapper-0 1d.s3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000])
swapper-0 1d.s3 100us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000])
swapper-0 1d.s3 100us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f)
vim:ft=help
=======
And this is a trace with ftrace_enabled == 1
=======
preemption latency trace v1.1.5 on 2.6.24-rc7
--------------------------------------------------------------------
latency: 102 us, #12/12, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2)
-----------------
| task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0)
-----------------
=> started at: _spin_lock_irqsave+0x2a/0xb7
=> ended at: _spin_unlock_irqrestore+0x32/0x5f
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| /
||||| delay
cmd pid ||||| time | caller
\ / ||||| \ | /
swapper-0 1dNs3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000])
swapper-0 1dNs3 46us : e1000_read_phy_reg+0x16/0x225 [e1000] (e1000_update_stats+0x5e2/0x64c [e1000])
swapper-0 1dNs3 46us : e1000_swfw_sync_acquire+0x10/0x99 [e1000] (e1000_read_phy_reg+0x49/0x225 [e1000])
swapper-0 1dNs3 46us : e1000_get_hw_eeprom_semaphore+0x12/0xa6 [e1000] (e1000_swfw_sync_acquire+0x36/0x99 [e1000])
swapper-0 1dNs3 47us : __const_udelay+0x9/0x47 (e1000_read_phy_reg+0x116/0x225 [e1000])
swapper-0 1dNs3 47us+: __delay+0x9/0x50 (__const_udelay+0x45/0x47)
swapper-0 1dNs3 97us : preempt_schedule+0xc/0x84 (__delay+0x4e/0x50)
swapper-0 1dNs3 98us : e1000_swfw_sync_release+0xc/0x55 [e1000] (e1000_read_phy_reg+0x211/0x225 [e1000])
swapper-0 1dNs3 99us+: e1000_put_hw_eeprom_semaphore+0x9/0x35 [e1000] (e1000_swfw_sync_release+0x50/0x55 [e1000])
swapper-0 1dNs3 101us : _spin_unlock_irqrestore+0xe/0x5f (e1000_update_stats+0x641/0x64c [e1000])
swapper-0 1dNs3 102us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000])
swapper-0 1dNs3 102us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f)
vim:ft=help
=======
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
66 lines
1.7 KiB
Plaintext
66 lines
1.7 KiB
Plaintext
#
|
|
# Architectures that offer an FTRACE implementation should select HAVE_FTRACE:
|
|
#
|
|
config HAVE_FTRACE
|
|
bool
|
|
|
|
config TRACER_MAX_TRACE
|
|
bool
|
|
|
|
config TRACING
|
|
bool
|
|
select DEBUG_FS
|
|
|
|
config FTRACE
|
|
bool "Kernel Function Tracer"
|
|
depends on DEBUG_KERNEL && HAVE_FTRACE
|
|
select FRAME_POINTER
|
|
select TRACING
|
|
select CONTEXT_SWITCH_TRACER
|
|
help
|
|
Enable the kernel to trace every kernel function. This is done
|
|
by using a compiler feature to insert a small, 5-byte No-Operation
|
|
instruction to the beginning of every kernel function, which NOP
|
|
sequence is then dynamically patched into a tracer call when
|
|
tracing is enabled by the administrator. If it's runtime disabled
|
|
(the bootup default), then the overhead of the instructions is very
|
|
small and not measurable even in micro-benchmarks.
|
|
|
|
config IRQSOFF_TRACER
|
|
bool "Interrupts-off Latency Tracer"
|
|
default n
|
|
depends on TRACE_IRQFLAGS_SUPPORT
|
|
depends on GENERIC_TIME
|
|
select TRACE_IRQFLAGS
|
|
select TRACING
|
|
select TRACER_MAX_TRACE
|
|
help
|
|
This option measures the time spent in irqs-off critical
|
|
sections, with microsecond accuracy.
|
|
|
|
The default measurement method is a maximum search, which is
|
|
disabled by default and can be runtime (re-)started
|
|
via:
|
|
|
|
echo 0 > /debugfs/tracing/tracing_max_latency
|
|
|
|
config SCHED_TRACER
|
|
bool "Scheduling Latency Tracer"
|
|
depends on DEBUG_KERNEL
|
|
select TRACING
|
|
select CONTEXT_SWITCH_TRACER
|
|
select TRACER_MAX_TRACE
|
|
help
|
|
This tracer tracks the latency of the highest priority task
|
|
to be scheduled in, starting from the point it has woken up.
|
|
|
|
config CONTEXT_SWITCH_TRACER
|
|
bool "Trace process context switches"
|
|
depends on DEBUG_KERNEL
|
|
select TRACING
|
|
select MARKERS
|
|
help
|
|
This tracer gets called from the context switch and records
|
|
all switching of tasks.
|
|
|