forked from luck/tmp_suning_uos_patched
357c9c1f07
This patch removes support for ARMv3 CPUs, which haven't worked properly for quite some time (see the FIXME comment in arch/arm/mm/fault.c). The only V3 parts left is the cache model for ARMv3, which is needed for some odd reason by ARM740T CPUs, and being able to build with -march=armv3, which is required for the RiscPC platform due to its bus structure. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
877 lines
22 KiB
Plaintext
877 lines
22 KiB
Plaintext
comment "Processor Type"
|
|
|
|
# Select CPU types depending on the architecture selected. This selects
|
|
# which CPUs we support in the kernel image, and the compiler instruction
|
|
# optimiser behaviour.
|
|
|
|
# ARM7TDMI
|
|
config CPU_ARM7TDMI
|
|
bool "Support ARM7TDMI processor"
|
|
depends on !MMU
|
|
select CPU_32v4T
|
|
select CPU_ABRT_LV4T
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_V4
|
|
help
|
|
A 32-bit RISC microprocessor based on the ARM7 processor core
|
|
which has no memory control unit and cache.
|
|
|
|
Say Y if you want support for the ARM7TDMI processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM720T
|
|
config CPU_ARM720T
|
|
bool "Support ARM720T processor" if ARCH_INTEGRATOR
|
|
select CPU_32v4T
|
|
select CPU_ABRT_LV4T
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_V4
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WT if MMU
|
|
select CPU_TLB_V4WT if MMU
|
|
help
|
|
A 32-bit RISC processor with 8kByte Cache, Write Buffer and
|
|
MMU built around an ARM7TDMI core.
|
|
|
|
Say Y if you want support for the ARM720T processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM740T
|
|
config CPU_ARM740T
|
|
bool "Support ARM740T processor" if ARCH_INTEGRATOR
|
|
depends on !MMU
|
|
select CPU_32v4T
|
|
select CPU_ABRT_LV4T
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_V3 # although the core is v4t
|
|
select CPU_CP15_MPU
|
|
help
|
|
A 32-bit RISC processor with 8KB cache or 4KB variants,
|
|
write buffer and MPU(Protection Unit) built around
|
|
an ARM7TDMI core.
|
|
|
|
Say Y if you want support for the ARM740T processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM9TDMI
|
|
config CPU_ARM9TDMI
|
|
bool "Support ARM9TDMI processor"
|
|
depends on !MMU
|
|
select CPU_32v4T
|
|
select CPU_ABRT_NOMMU
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_V4
|
|
help
|
|
A 32-bit RISC microprocessor based on the ARM9 processor core
|
|
which has no memory control unit and cache.
|
|
|
|
Say Y if you want support for the ARM9TDMI processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM920T
|
|
config CPU_ARM920T
|
|
bool "Support ARM920T processor" if ARCH_INTEGRATOR
|
|
select CPU_32v4T
|
|
select CPU_ABRT_EV4T
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_V4WT
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU
|
|
select CPU_TLB_V4WBI if MMU
|
|
help
|
|
The ARM920T is licensed to be produced by numerous vendors,
|
|
and is used in the Cirrus EP93xx and the Samsung S3C2410.
|
|
|
|
Say Y if you want support for the ARM920T processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM922T
|
|
config CPU_ARM922T
|
|
bool "Support ARM922T processor" if ARCH_INTEGRATOR
|
|
select CPU_32v4T
|
|
select CPU_ABRT_EV4T
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_V4WT
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU
|
|
select CPU_TLB_V4WBI if MMU
|
|
help
|
|
The ARM922T is a version of the ARM920T, but with smaller
|
|
instruction and data caches. It is used in Altera's
|
|
Excalibur XA device family and Micrel's KS8695 Centaur.
|
|
|
|
Say Y if you want support for the ARM922T processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM925T
|
|
config CPU_ARM925T
|
|
bool "Support ARM925T processor" if ARCH_OMAP1
|
|
select CPU_32v4T
|
|
select CPU_ABRT_EV4T
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_V4WT
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU
|
|
select CPU_TLB_V4WBI if MMU
|
|
help
|
|
The ARM925T is a mix between the ARM920T and ARM926T, but with
|
|
different instruction and data caches. It is used in TI's OMAP
|
|
device family.
|
|
|
|
Say Y if you want support for the ARM925T processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM926T
|
|
config CPU_ARM926T
|
|
bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV5TJ
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU
|
|
select CPU_TLB_V4WBI if MMU
|
|
help
|
|
This is a variant of the ARM920. It has slightly different
|
|
instruction sequences for cache and TLB operations. Curiously,
|
|
there is no documentation on it at the ARM corporate website.
|
|
|
|
Say Y if you want support for the ARM926T processor.
|
|
Otherwise, say N.
|
|
|
|
# FA526
|
|
config CPU_FA526
|
|
bool
|
|
select CPU_32v4
|
|
select CPU_ABRT_EV4
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_CACHE_FA
|
|
select CPU_COPY_FA if MMU
|
|
select CPU_TLB_FA if MMU
|
|
help
|
|
The FA526 is a version of the ARMv4 compatible processor with
|
|
Branch Target Buffer, Unified TLB and cache line size 16.
|
|
|
|
Say Y if you want support for the FA526 processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM940T
|
|
config CPU_ARM940T
|
|
bool "Support ARM940T processor" if ARCH_INTEGRATOR
|
|
depends on !MMU
|
|
select CPU_32v4T
|
|
select CPU_ABRT_NOMMU
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MPU
|
|
help
|
|
ARM940T is a member of the ARM9TDMI family of general-
|
|
purpose microprocessors with MPU and separate 4KB
|
|
instruction and 4KB data cases, each with a 4-word line
|
|
length.
|
|
|
|
Say Y if you want support for the ARM940T processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM946E-S
|
|
config CPU_ARM946E
|
|
bool "Support ARM946E-S processor" if ARCH_INTEGRATOR
|
|
depends on !MMU
|
|
select CPU_32v5
|
|
select CPU_ABRT_NOMMU
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MPU
|
|
help
|
|
ARM946E-S is a member of the ARM9E-S family of high-
|
|
performance, 32-bit system-on-chip processor solutions.
|
|
The TCM and ARMv5TE 32-bit instruction set is supported.
|
|
|
|
Say Y if you want support for the ARM946E-S processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM1020 - needs validating
|
|
config CPU_ARM1020
|
|
bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV4T
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_V4WT
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU
|
|
select CPU_TLB_V4WBI if MMU
|
|
help
|
|
The ARM1020 is the 32K cached version of the ARM10 processor,
|
|
with an addition of a floating-point unit.
|
|
|
|
Say Y if you want support for the ARM1020 processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM1020E - needs validating
|
|
config CPU_ARM1020E
|
|
bool "Support ARM1020E processor" if ARCH_INTEGRATOR
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV4T
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_V4WT
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU
|
|
select CPU_TLB_V4WBI if MMU
|
|
depends on n
|
|
|
|
# ARM1022E
|
|
config CPU_ARM1022
|
|
bool "Support ARM1022E processor" if ARCH_INTEGRATOR
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV4T
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU # can probably do better
|
|
select CPU_TLB_V4WBI if MMU
|
|
help
|
|
The ARM1022E is an implementation of the ARMv5TE architecture
|
|
based upon the ARM10 integer core with a 16KiB L1 Harvard cache,
|
|
embedded trace macrocell, and a floating-point unit.
|
|
|
|
Say Y if you want support for the ARM1022E processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM1026EJ-S
|
|
config CPU_ARM1026
|
|
bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU # can probably do better
|
|
select CPU_TLB_V4WBI if MMU
|
|
help
|
|
The ARM1026EJ-S is an implementation of the ARMv5TEJ architecture
|
|
based upon the ARM10 integer core.
|
|
|
|
Say Y if you want support for the ARM1026EJ-S processor.
|
|
Otherwise, say N.
|
|
|
|
# SA110
|
|
config CPU_SA110
|
|
bool "Support StrongARM(R) SA-110 processor" if ARCH_RPC
|
|
select CPU_32v3 if ARCH_RPC
|
|
select CPU_32v4 if !ARCH_RPC
|
|
select CPU_ABRT_EV4
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_V4WB
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU
|
|
select CPU_TLB_V4WB if MMU
|
|
help
|
|
The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and
|
|
is available at five speeds ranging from 100 MHz to 233 MHz.
|
|
More information is available at
|
|
<http://developer.intel.com/design/strong/sa110.htm>.
|
|
|
|
Say Y if you want support for the SA-110 processor.
|
|
Otherwise, say N.
|
|
|
|
# SA1100
|
|
config CPU_SA1100
|
|
bool
|
|
select CPU_32v4
|
|
select CPU_ABRT_EV4
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_V4WB
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_TLB_V4WB if MMU
|
|
|
|
# XScale
|
|
config CPU_XSCALE
|
|
bool
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV5T
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_TLB_V4WBI if MMU
|
|
|
|
# XScale Core Version 3
|
|
config CPU_XSC3
|
|
bool
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV5T
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_TLB_V4WBI if MMU
|
|
select IO_36
|
|
|
|
# Marvell PJ1 (Mohawk)
|
|
config CPU_MOHAWK
|
|
bool
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV5T
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_TLB_V4WBI if MMU
|
|
select CPU_COPY_V4WB if MMU
|
|
|
|
# Feroceon
|
|
config CPU_FEROCEON
|
|
bool
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV5T
|
|
select CPU_PABRT_LEGACY
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_FEROCEON if MMU
|
|
select CPU_TLB_FEROCEON if MMU
|
|
|
|
config CPU_FEROCEON_OLD_ID
|
|
bool "Accept early Feroceon cores with an ARM926 ID"
|
|
depends on CPU_FEROCEON && !CPU_ARM926T
|
|
default y
|
|
help
|
|
This enables the usage of some old Feroceon cores
|
|
for which the CPU ID is equal to the ARM926 ID.
|
|
Relevant for Feroceon-1850 and early Feroceon-2850.
|
|
|
|
# Marvell PJ4
|
|
config CPU_PJ4
|
|
bool
|
|
select CPU_V7
|
|
select ARM_THUMBEE
|
|
|
|
# ARMv6
|
|
config CPU_V6
|
|
bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
|
|
select CPU_32v6
|
|
select CPU_ABRT_EV6
|
|
select CPU_PABRT_V6
|
|
select CPU_CACHE_V6
|
|
select CPU_CACHE_VIPT
|
|
select CPU_CP15_MMU
|
|
select CPU_HAS_ASID if MMU
|
|
select CPU_COPY_V6 if MMU
|
|
select CPU_TLB_V6 if MMU
|
|
|
|
# ARMv6k
|
|
config CPU_V6K
|
|
bool "Support ARM V6K processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
|
|
select CPU_32v6
|
|
select CPU_32v6K
|
|
select CPU_ABRT_EV6
|
|
select CPU_PABRT_V6
|
|
select CPU_CACHE_V6
|
|
select CPU_CACHE_VIPT
|
|
select CPU_CP15_MMU
|
|
select CPU_HAS_ASID if MMU
|
|
select CPU_COPY_V6 if MMU
|
|
select CPU_TLB_V6 if MMU
|
|
|
|
# ARMv7
|
|
config CPU_V7
|
|
bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
|
|
select CPU_32v6K
|
|
select CPU_32v7
|
|
select CPU_ABRT_EV7
|
|
select CPU_PABRT_V7
|
|
select CPU_CACHE_V7
|
|
select CPU_CACHE_VIPT
|
|
select CPU_CP15_MMU
|
|
select CPU_HAS_ASID if MMU
|
|
select CPU_COPY_V6 if MMU
|
|
select CPU_TLB_V7 if MMU
|
|
|
|
# Figure out what processor architecture version we should be using.
|
|
# This defines the compiler instruction set which depends on the machine type.
|
|
config CPU_32v3
|
|
bool
|
|
select TLS_REG_EMUL if SMP || !MMU
|
|
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
|
|
select CPU_USE_DOMAINS if MMU
|
|
|
|
config CPU_32v4
|
|
bool
|
|
select TLS_REG_EMUL if SMP || !MMU
|
|
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
|
|
select CPU_USE_DOMAINS if MMU
|
|
|
|
config CPU_32v4T
|
|
bool
|
|
select TLS_REG_EMUL if SMP || !MMU
|
|
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
|
|
select CPU_USE_DOMAINS if MMU
|
|
|
|
config CPU_32v5
|
|
bool
|
|
select TLS_REG_EMUL if SMP || !MMU
|
|
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
|
|
select CPU_USE_DOMAINS if MMU
|
|
|
|
config CPU_32v6
|
|
bool
|
|
select TLS_REG_EMUL if !CPU_32v6K && !MMU
|
|
select CPU_USE_DOMAINS if CPU_V6 && MMU
|
|
|
|
config CPU_32v6K
|
|
bool
|
|
|
|
config CPU_32v7
|
|
bool
|
|
|
|
# The abort model
|
|
config CPU_ABRT_NOMMU
|
|
bool
|
|
|
|
config CPU_ABRT_EV4
|
|
bool
|
|
|
|
config CPU_ABRT_EV4T
|
|
bool
|
|
|
|
config CPU_ABRT_LV4T
|
|
bool
|
|
|
|
config CPU_ABRT_EV5T
|
|
bool
|
|
|
|
config CPU_ABRT_EV5TJ
|
|
bool
|
|
|
|
config CPU_ABRT_EV6
|
|
bool
|
|
|
|
config CPU_ABRT_EV7
|
|
bool
|
|
|
|
config CPU_PABRT_LEGACY
|
|
bool
|
|
|
|
config CPU_PABRT_V6
|
|
bool
|
|
|
|
config CPU_PABRT_V7
|
|
bool
|
|
|
|
# The cache model
|
|
config CPU_CACHE_V3
|
|
bool
|
|
|
|
config CPU_CACHE_V4
|
|
bool
|
|
|
|
config CPU_CACHE_V4WT
|
|
bool
|
|
|
|
config CPU_CACHE_V4WB
|
|
bool
|
|
|
|
config CPU_CACHE_V6
|
|
bool
|
|
|
|
config CPU_CACHE_V7
|
|
bool
|
|
|
|
config CPU_CACHE_VIVT
|
|
bool
|
|
|
|
config CPU_CACHE_VIPT
|
|
bool
|
|
|
|
config CPU_CACHE_FA
|
|
bool
|
|
|
|
if MMU
|
|
# The copy-page model
|
|
config CPU_COPY_V4WT
|
|
bool
|
|
|
|
config CPU_COPY_V4WB
|
|
bool
|
|
|
|
config CPU_COPY_FEROCEON
|
|
bool
|
|
|
|
config CPU_COPY_FA
|
|
bool
|
|
|
|
config CPU_COPY_V6
|
|
bool
|
|
|
|
# This selects the TLB model
|
|
config CPU_TLB_V4WT
|
|
bool
|
|
help
|
|
ARM Architecture Version 4 TLB with writethrough cache.
|
|
|
|
config CPU_TLB_V4WB
|
|
bool
|
|
help
|
|
ARM Architecture Version 4 TLB with writeback cache.
|
|
|
|
config CPU_TLB_V4WBI
|
|
bool
|
|
help
|
|
ARM Architecture Version 4 TLB with writeback cache and invalidate
|
|
instruction cache entry.
|
|
|
|
config CPU_TLB_FEROCEON
|
|
bool
|
|
help
|
|
Feroceon TLB (v4wbi with non-outer-cachable page table walks).
|
|
|
|
config CPU_TLB_FA
|
|
bool
|
|
help
|
|
Faraday ARM FA526 architecture, unified TLB with writeback cache
|
|
and invalidate instruction cache entry. Branch target buffer is
|
|
also supported.
|
|
|
|
config CPU_TLB_V6
|
|
bool
|
|
|
|
config CPU_TLB_V7
|
|
bool
|
|
|
|
config VERIFY_PERMISSION_FAULT
|
|
bool
|
|
endif
|
|
|
|
config CPU_HAS_ASID
|
|
bool
|
|
help
|
|
This indicates whether the CPU has the ASID register; used to
|
|
tag TLB and possibly cache entries.
|
|
|
|
config CPU_CP15
|
|
bool
|
|
help
|
|
Processor has the CP15 register.
|
|
|
|
config CPU_CP15_MMU
|
|
bool
|
|
select CPU_CP15
|
|
help
|
|
Processor has the CP15 register, which has MMU related registers.
|
|
|
|
config CPU_CP15_MPU
|
|
bool
|
|
select CPU_CP15
|
|
help
|
|
Processor has the CP15 register, which has MPU related registers.
|
|
|
|
config CPU_USE_DOMAINS
|
|
bool
|
|
help
|
|
This option enables or disables the use of domain switching
|
|
via the set_fs() function.
|
|
|
|
#
|
|
# CPU supports 36-bit I/O
|
|
#
|
|
config IO_36
|
|
bool
|
|
|
|
comment "Processor Features"
|
|
|
|
config ARM_LPAE
|
|
bool "Support for the Large Physical Address Extension"
|
|
depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \
|
|
!CPU_32v4 && !CPU_32v3
|
|
help
|
|
Say Y if you have an ARMv7 processor supporting the LPAE page
|
|
table format and you would like to access memory beyond the
|
|
4GB limit. The resulting kernel image will not run on
|
|
processors without the LPA extension.
|
|
|
|
If unsure, say N.
|
|
|
|
config ARCH_PHYS_ADDR_T_64BIT
|
|
def_bool ARM_LPAE
|
|
|
|
config ARCH_DMA_ADDR_T_64BIT
|
|
bool
|
|
|
|
config ARM_THUMB
|
|
bool "Support Thumb user binaries"
|
|
depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || CPU_V7 || CPU_FEROCEON
|
|
default y
|
|
help
|
|
Say Y if you want to include kernel support for running user space
|
|
Thumb binaries.
|
|
|
|
The Thumb instruction set is a compressed form of the standard ARM
|
|
instruction set resulting in smaller binaries at the expense of
|
|
slightly less efficient code.
|
|
|
|
If you don't know what this all is, saying Y is a safe choice.
|
|
|
|
config ARM_THUMBEE
|
|
bool "Enable ThumbEE CPU extension"
|
|
depends on CPU_V7
|
|
help
|
|
Say Y here if you have a CPU with the ThumbEE extension and code to
|
|
make use of it. Say N for code that can run on CPUs without ThumbEE.
|
|
|
|
config SWP_EMULATE
|
|
bool "Emulate SWP/SWPB instructions"
|
|
depends on !CPU_USE_DOMAINS && CPU_V7
|
|
select HAVE_PROC_CPU if PROC_FS
|
|
default y if SMP
|
|
help
|
|
ARMv6 architecture deprecates use of the SWP/SWPB instructions.
|
|
ARMv7 multiprocessing extensions introduce the ability to disable
|
|
these instructions, triggering an undefined instruction exception
|
|
when executed. Say Y here to enable software emulation of these
|
|
instructions for userspace (not kernel) using LDREX/STREX.
|
|
Also creates /proc/cpu/swp_emulation for statistics.
|
|
|
|
In some older versions of glibc [<=2.8] SWP is used during futex
|
|
trylock() operations with the assumption that the code will not
|
|
be preempted. This invalid assumption may be more likely to fail
|
|
with SWP emulation enabled, leading to deadlock of the user
|
|
application.
|
|
|
|
NOTE: when accessing uncached shared regions, LDREX/STREX rely
|
|
on an external transaction monitoring block called a global
|
|
monitor to maintain update atomicity. If your system does not
|
|
implement a global monitor, this option can cause programs that
|
|
perform SWP operations to uncached memory to deadlock.
|
|
|
|
If unsure, say Y.
|
|
|
|
config CPU_BIG_ENDIAN
|
|
bool "Build big-endian kernel"
|
|
depends on ARCH_SUPPORTS_BIG_ENDIAN
|
|
help
|
|
Say Y if you plan on running a kernel in big-endian mode.
|
|
Note that your board must be properly built and your board
|
|
port must properly enable any big-endian related features
|
|
of your chipset/board/processor.
|
|
|
|
config CPU_ENDIAN_BE8
|
|
bool
|
|
depends on CPU_BIG_ENDIAN
|
|
default CPU_V6 || CPU_V6K || CPU_V7
|
|
help
|
|
Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
|
|
|
|
config CPU_ENDIAN_BE32
|
|
bool
|
|
depends on CPU_BIG_ENDIAN
|
|
default !CPU_ENDIAN_BE8
|
|
help
|
|
Support for the BE-32 (big-endian) mode on pre-ARMv6 processors.
|
|
|
|
config CPU_HIGH_VECTOR
|
|
depends on !MMU && CPU_CP15 && !CPU_ARM740T
|
|
bool "Select the High exception vector"
|
|
help
|
|
Say Y here to select high exception vector(0xFFFF0000~).
|
|
The exception vector can vary depending on the platform
|
|
design in nommu mode. If your platform needs to select
|
|
high exception vector, say Y.
|
|
Otherwise or if you are unsure, say N, and the low exception
|
|
vector (0x00000000~) will be used.
|
|
|
|
config CPU_ICACHE_DISABLE
|
|
bool "Disable I-Cache (I-bit)"
|
|
depends on CPU_CP15 && !(CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3)
|
|
help
|
|
Say Y here to disable the processor instruction cache. Unless
|
|
you have a reason not to or are unsure, say N.
|
|
|
|
config CPU_DCACHE_DISABLE
|
|
bool "Disable D-Cache (C-bit)"
|
|
depends on CPU_CP15
|
|
help
|
|
Say Y here to disable the processor data cache. Unless
|
|
you have a reason not to or are unsure, say N.
|
|
|
|
config CPU_DCACHE_SIZE
|
|
hex
|
|
depends on CPU_ARM740T || CPU_ARM946E
|
|
default 0x00001000 if CPU_ARM740T
|
|
default 0x00002000 # default size for ARM946E-S
|
|
help
|
|
Some cores are synthesizable to have various sized cache. For
|
|
ARM946E-S case, it can vary from 0KB to 1MB.
|
|
To support such cache operations, it is efficient to know the size
|
|
before compile time.
|
|
If your SoC is configured to have a different size, define the value
|
|
here with proper conditions.
|
|
|
|
config CPU_DCACHE_WRITETHROUGH
|
|
bool "Force write through D-cache"
|
|
depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FA526) && !CPU_DCACHE_DISABLE
|
|
default y if CPU_ARM925T
|
|
help
|
|
Say Y here to use the data cache in writethrough mode. Unless you
|
|
specifically require this or are unsure, say N.
|
|
|
|
config CPU_CACHE_ROUND_ROBIN
|
|
bool "Round robin I and D cache replacement algorithm"
|
|
depends on (CPU_ARM926T || CPU_ARM946E || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE)
|
|
help
|
|
Say Y here to use the predictable round-robin cache replacement
|
|
policy. Unless you specifically require this or are unsure, say N.
|
|
|
|
config CPU_BPREDICT_DISABLE
|
|
bool "Disable branch prediction"
|
|
depends on CPU_ARM1020 || CPU_V6 || CPU_V6K || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526
|
|
help
|
|
Say Y here to disable branch prediction. If unsure, say N.
|
|
|
|
config TLS_REG_EMUL
|
|
bool
|
|
help
|
|
An SMP system using a pre-ARMv6 processor (there are apparently
|
|
a few prototypes like that in existence) and therefore access to
|
|
that required register must be emulated.
|
|
|
|
config NEEDS_SYSCALL_FOR_CMPXCHG
|
|
bool
|
|
help
|
|
SMP on a pre-ARMv6 processor? Well OK then.
|
|
Forget about fast user space cmpxchg support.
|
|
It is just not possible.
|
|
|
|
config DMA_CACHE_RWFO
|
|
bool "Enable read/write for ownership DMA cache maintenance"
|
|
depends on CPU_V6K && SMP
|
|
default y
|
|
help
|
|
The Snoop Control Unit on ARM11MPCore does not detect the
|
|
cache maintenance operations and the dma_{map,unmap}_area()
|
|
functions may leave stale cache entries on other CPUs. By
|
|
enabling this option, Read or Write For Ownership in the ARMv6
|
|
DMA cache maintenance functions is performed. These LDR/STR
|
|
instructions change the cache line state to shared or modified
|
|
so that the cache operation has the desired effect.
|
|
|
|
Note that the workaround is only valid on processors that do
|
|
not perform speculative loads into the D-cache. For such
|
|
processors, if cache maintenance operations are not broadcast
|
|
in hardware, other workarounds are needed (e.g. cache
|
|
maintenance broadcasting in software via FIQ).
|
|
|
|
config OUTER_CACHE
|
|
bool
|
|
|
|
config OUTER_CACHE_SYNC
|
|
bool
|
|
help
|
|
The outer cache has a outer_cache_fns.sync function pointer
|
|
that can be used to drain the write buffer of the outer cache.
|
|
|
|
config CACHE_FEROCEON_L2
|
|
bool "Enable the Feroceon L2 cache controller"
|
|
depends on ARCH_KIRKWOOD || ARCH_MV78XX0
|
|
default y
|
|
select OUTER_CACHE
|
|
help
|
|
This option enables the Feroceon L2 cache controller.
|
|
|
|
config CACHE_FEROCEON_L2_WRITETHROUGH
|
|
bool "Force Feroceon L2 cache write through"
|
|
depends on CACHE_FEROCEON_L2
|
|
help
|
|
Say Y here to use the Feroceon L2 cache in writethrough mode.
|
|
Unless you specifically require this, say N for writeback mode.
|
|
|
|
config MIGHT_HAVE_CACHE_L2X0
|
|
bool
|
|
help
|
|
This option should be selected by machines which have a L2x0
|
|
or PL310 cache controller, but where its use is optional.
|
|
|
|
The only effect of this option is to make CACHE_L2X0 and
|
|
related options available to the user for configuration.
|
|
|
|
Boards or SoCs which always require the cache controller
|
|
support to be present should select CACHE_L2X0 directly
|
|
instead of this option, thus preventing the user from
|
|
inadvertently configuring a broken kernel.
|
|
|
|
config CACHE_L2X0
|
|
bool "Enable the L2x0 outer cache controller" if MIGHT_HAVE_CACHE_L2X0
|
|
default MIGHT_HAVE_CACHE_L2X0
|
|
select OUTER_CACHE
|
|
select OUTER_CACHE_SYNC
|
|
help
|
|
This option enables the L2x0 PrimeCell.
|
|
|
|
config CACHE_PL310
|
|
bool
|
|
depends on CACHE_L2X0
|
|
default y if CPU_V7 && !(CPU_V6 || CPU_V6K)
|
|
help
|
|
This option enables optimisations for the PL310 cache
|
|
controller.
|
|
|
|
config CACHE_TAUROS2
|
|
bool "Enable the Tauros2 L2 cache controller"
|
|
depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4)
|
|
default y
|
|
select OUTER_CACHE
|
|
help
|
|
This option enables the Tauros2 L2 cache controller (as
|
|
found on PJ1/PJ4).
|
|
|
|
config CACHE_XSC3L2
|
|
bool "Enable the L2 cache on XScale3"
|
|
depends on CPU_XSC3
|
|
default y
|
|
select OUTER_CACHE
|
|
help
|
|
This option enables the L2 cache on XScale3.
|
|
|
|
config ARM_L1_CACHE_SHIFT_6
|
|
bool
|
|
default y if CPU_V7
|
|
help
|
|
Setting ARM L1 cache line size to 64 Bytes.
|
|
|
|
config ARM_L1_CACHE_SHIFT
|
|
int
|
|
default 6 if ARM_L1_CACHE_SHIFT_6
|
|
default 5
|
|
|
|
config ARM_DMA_MEM_BUFFERABLE
|
|
bool "Use non-cacheable memory for DMA" if (CPU_V6 || CPU_V6K) && !CPU_V7
|
|
depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \
|
|
MACH_REALVIEW_PB11MP)
|
|
default y if CPU_V6 || CPU_V6K || CPU_V7
|
|
help
|
|
Historically, the kernel has used strongly ordered mappings to
|
|
provide DMA coherent memory. With the advent of ARMv7, mapping
|
|
memory with differing types results in unpredictable behaviour,
|
|
so on these CPUs, this option is forced on.
|
|
|
|
Multiple mappings with differing attributes is also unpredictable
|
|
on ARMv6 CPUs, but since they do not have aggressive speculative
|
|
prefetch, no harm appears to occur.
|
|
|
|
However, drivers may be missing the necessary barriers for ARMv6,
|
|
and therefore turning this on may result in unpredictable driver
|
|
behaviour. Therefore, we offer this as an option.
|
|
|
|
You are recommended say 'Y' here and debug any affected drivers.
|
|
|
|
config ARCH_HAS_BARRIERS
|
|
bool
|
|
help
|
|
This option allows the use of custom mandatory barriers
|
|
included via the mach/barriers.h file.
|