forked from luck/tmp_suning_uos_patched
6ab3d5624e
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
244 lines
6.5 KiB
C
244 lines
6.5 KiB
C
/*
|
|
* MPC85xx setup and early boot code plus other random bits.
|
|
*
|
|
* Maintained by Kumar Gala (see MAINTAINERS for contact information)
|
|
*
|
|
* Copyright 2005 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/stddef.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/root_dev.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/time.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/mpc85xx.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/mpic.h>
|
|
#include <mm/mmu_decl.h>
|
|
#include <asm/udbg.h>
|
|
|
|
#include <sysdev/fsl_soc.h>
|
|
#include "mpc85xx.h"
|
|
|
|
#ifndef CONFIG_PCI
|
|
unsigned long isa_io_base = 0;
|
|
unsigned long isa_mem_base = 0;
|
|
#endif
|
|
|
|
/*
|
|
* Internal interrupts are all Level Sensitive, and Positive Polarity
|
|
*
|
|
* Note: Likely, this table and the following function should be
|
|
* obtained and derived from the OF Device Tree.
|
|
*/
|
|
static u_char mpc85xx_ads_openpic_initsenses[] __initdata = {
|
|
MPC85XX_INTERNAL_IRQ_SENSES,
|
|
0x0, /* External 0: */
|
|
#if defined(CONFIG_PCI)
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 0 */
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 1 */
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 2 */
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 4: PCI slot 3 */
|
|
#else
|
|
0x0, /* External 1: */
|
|
0x0, /* External 2: */
|
|
0x0, /* External 3: */
|
|
0x0, /* External 4: */
|
|
#endif
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
|
|
0x0, /* External 6: */
|
|
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */
|
|
0x0, /* External 8: */
|
|
0x0, /* External 9: */
|
|
0x0, /* External 10: */
|
|
0x0, /* External 11: */
|
|
};
|
|
|
|
#ifdef CONFIG_PCI
|
|
/*
|
|
* interrupt routing
|
|
*/
|
|
|
|
int
|
|
mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
|
|
{
|
|
static char pci_irq_table[][4] =
|
|
/*
|
|
* This is little evil, but works around the fact
|
|
* that revA boards have IDSEL starting at 18
|
|
* and others boards (older) start at 12
|
|
*
|
|
* PCI IDSEL/INTPIN->INTLINE
|
|
* A B C D
|
|
*/
|
|
{
|
|
{PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */
|
|
{PIRQD, PIRQA, PIRQB, PIRQC},
|
|
{PIRQC, PIRQD, PIRQA, PIRQB},
|
|
{PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */
|
|
{0, 0, 0, 0}, /* -- */
|
|
{0, 0, 0, 0}, /* -- */
|
|
{0, 0, 0, 0}, /* -- */
|
|
{0, 0, 0, 0}, /* -- */
|
|
{0, 0, 0, 0}, /* -- */
|
|
{0, 0, 0, 0}, /* -- */
|
|
{PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */
|
|
{PIRQD, PIRQA, PIRQB, PIRQC},
|
|
{PIRQC, PIRQD, PIRQA, PIRQB},
|
|
{PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */
|
|
{0, 0, 0, 0}, /* -- */
|
|
{0, 0, 0, 0}, /* -- */
|
|
{PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */
|
|
{PIRQD, PIRQA, PIRQB, PIRQC},
|
|
{PIRQC, PIRQD, PIRQA, PIRQB},
|
|
{PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */
|
|
};
|
|
|
|
const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4;
|
|
return PCI_IRQ_TABLE_LOOKUP;
|
|
}
|
|
|
|
int
|
|
mpc85xx_exclude_device(u_char bus, u_char devfn)
|
|
{
|
|
if (bus == 0 && PCI_SLOT(devfn) == 0)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
else
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
#endif /* CONFIG_PCI */
|
|
|
|
|
|
void __init mpc85xx_ads_pic_init(void)
|
|
{
|
|
struct mpic *mpic1;
|
|
phys_addr_t OpenPIC_PAddr;
|
|
|
|
/* Determine the Physical Address of the OpenPIC regs */
|
|
OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET;
|
|
|
|
mpic1 = mpic_alloc(OpenPIC_PAddr,
|
|
MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
|
|
4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250,
|
|
mpc85xx_ads_openpic_initsenses,
|
|
sizeof(mpc85xx_ads_openpic_initsenses),
|
|
" OpenPIC ");
|
|
BUG_ON(mpic1 == NULL);
|
|
mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
|
|
mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280);
|
|
mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300);
|
|
mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380);
|
|
mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400);
|
|
mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480);
|
|
mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500);
|
|
mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580);
|
|
|
|
/* dummy mappings to get to 48 */
|
|
mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600);
|
|
mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680);
|
|
mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700);
|
|
mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780);
|
|
|
|
/* External ints */
|
|
mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000);
|
|
mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080);
|
|
mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100);
|
|
mpic_init(mpic1);
|
|
}
|
|
|
|
/*
|
|
* Setup the architecture
|
|
*/
|
|
static void __init mpc85xx_ads_setup_arch(void)
|
|
{
|
|
struct device_node *cpu;
|
|
struct device_node *np;
|
|
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("mpc85xx_ads_setup_arch()", 0);
|
|
|
|
cpu = of_find_node_by_type(NULL, "cpu");
|
|
if (cpu != 0) {
|
|
unsigned int *fp;
|
|
|
|
fp = (int *)get_property(cpu, "clock-frequency", NULL);
|
|
if (fp != 0)
|
|
loops_per_jiffy = *fp / HZ;
|
|
else
|
|
loops_per_jiffy = 50000000 / HZ;
|
|
of_node_put(cpu);
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
|
|
add_bridge(np);
|
|
|
|
ppc_md.pci_swizzle = common_swizzle;
|
|
ppc_md.pci_map_irq = mpc85xx_map_irq;
|
|
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
|
|
#endif
|
|
|
|
#ifdef CONFIG_ROOT_NFS
|
|
ROOT_DEV = Root_NFS;
|
|
#else
|
|
ROOT_DEV = Root_HDA1;
|
|
#endif
|
|
}
|
|
|
|
void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
|
|
{
|
|
uint pvid, svid, phid1;
|
|
uint memsize = total_memory;
|
|
|
|
pvid = mfspr(SPRN_PVR);
|
|
svid = mfspr(SPRN_SVR);
|
|
|
|
seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
|
|
seq_printf(m, "Machine\t\t: mpc85xx\n");
|
|
seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
|
|
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
|
|
|
|
/* Display cpu Pll setting */
|
|
phid1 = mfspr(SPRN_HID1);
|
|
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
|
|
|
|
/* Display the amount of memory */
|
|
seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
|
|
}
|
|
|
|
/*
|
|
* Called very early, device-tree isn't unflattened
|
|
*/
|
|
static int __init mpc85xx_ads_probe(void)
|
|
{
|
|
/* We always match for now, eventually we should look at the flat
|
|
dev tree to ensure this is the board we are suppose to run on
|
|
*/
|
|
return 1;
|
|
}
|
|
|
|
define_machine(mpc85xx_ads) {
|
|
.name = "MPC85xx ADS",
|
|
.probe = mpc85xx_ads_probe,
|
|
.setup_arch = mpc85xx_ads_setup_arch,
|
|
.init_IRQ = mpc85xx_ads_pic_init,
|
|
.show_cpuinfo = mpc85xx_ads_show_cpuinfo,
|
|
.get_irq = mpic_get_irq,
|
|
.restart = mpc85xx_restart,
|
|
.calibrate_decr = generic_calibrate_decr,
|
|
.progress = udbg_progress,
|
|
};
|