kernel_optimize_test/arch/avr32/kernel/vmlinux.lds.c
Haavard Skinnemoen 5f97f7f940 [PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.

AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.

The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from

http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf

The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.

Full data sheet is available from

http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf

while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from

http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf

Information about the AT32STK1000 development board can be found at

http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918

including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.

Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.

This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.

[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:54 -07:00

140 lines
2.6 KiB
C

/*
* AVR32 linker script for the Linux kernel
*
* Copyright (C) 2004-2006 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define LOAD_OFFSET 0x00000000
#include <asm-generic/vmlinux.lds.h>
OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
OUTPUT_ARCH(avr32)
ENTRY(_start)
/* Big endian */
jiffies = jiffies_64 + 4;
SECTIONS
{
. = CONFIG_ENTRY_ADDRESS;
.init : AT(ADDR(.init) - LOAD_OFFSET) {
_stext = .;
__init_begin = .;
_sinittext = .;
*(.text.reset)
*(.init.text)
_einittext = .;
. = ALIGN(4);
__tagtable_begin = .;
*(.taglist)
__tagtable_end = .;
*(.init.data)
. = ALIGN(16);
__setup_start = .;
*(.init.setup)
__setup_end = .;
. = ALIGN(4);
__initcall_start = .;
*(.initcall1.init)
*(.initcall2.init)
*(.initcall3.init)
*(.initcall4.init)
*(.initcall5.init)
*(.initcall6.init)
*(.initcall7.init)
__initcall_end = .;
__con_initcall_start = .;
*(.con_initcall.init)
__con_initcall_end = .;
__security_initcall_start = .;
*(.security_initcall.init)
__security_initcall_end = .;
. = ALIGN(32);
__initramfs_start = .;
*(.init.ramfs)
__initramfs_end = .;
. = ALIGN(4096);
__init_end = .;
}
. = ALIGN(8192);
.text : AT(ADDR(.text) - LOAD_OFFSET) {
_evba = .;
_text = .;
*(.ex.text)
. = 0x50;
*(.tlbx.ex.text)
. = 0x60;
*(.tlbr.ex.text)
. = 0x70;
*(.tlbw.ex.text)
. = 0x100;
*(.scall.text)
*(.irq.text)
*(.text)
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
*(.fixup)
*(.gnu.warning)
_etext = .;
} = 0xd703d703
. = ALIGN(4);
__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
__start___ex_table = .;
*(__ex_table)
__stop___ex_table = .;
}
RODATA
. = ALIGN(8192);
.data : AT(ADDR(.data) - LOAD_OFFSET) {
_data = .;
_sdata = .;
/*
* First, the init task union, aligned to an 8K boundary.
*/
*(.data.init_task)
/* Then, the cacheline aligned data */
. = ALIGN(32);
*(.data.cacheline_aligned)
/* And the rest... */
*(.data.rel*)
*(.data)
CONSTRUCTORS
_edata = .;
}
. = ALIGN(8);
.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
__bss_start = .;
*(.bss)
*(COMMON)
. = ALIGN(8);
__bss_stop = .;
_end = .;
}
/* When something in the kernel is NOT compiled as a module, the module
* cleanup code and data are put into these segments. Both can then be
* thrown away, as cleanup code is never called unless it's a module.
*/
/DISCARD/ : {
*(.exit.text)
*(.exit.data)
*(.exitcall.exit)
}
DWARF_DEBUG
}