kernel_optimize_test/net/mac80211/pm.c
Johannes Berg c82c4a80bb mac80211: split aggregation stop by reason
The initiator/tx doesn't really identify why an
aggregation session is stopped, give a reason
for stopping that more clearly identifies what's
going on. This will help tell the driver clearly
what is expected of it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03 13:01:41 +01:00

231 lines
5.6 KiB
C

#include <net/mac80211.h>
#include <net/rtnetlink.h>
#include "ieee80211_i.h"
#include "mesh.h"
#include "driver-ops.h"
#include "led.h"
/* return value indicates whether the driver should be further notified */
static void ieee80211_quiesce(struct ieee80211_sub_if_data *sdata)
{
switch (sdata->vif.type) {
case NL80211_IFTYPE_STATION:
ieee80211_sta_quiesce(sdata);
break;
case NL80211_IFTYPE_ADHOC:
ieee80211_ibss_quiesce(sdata);
break;
case NL80211_IFTYPE_MESH_POINT:
ieee80211_mesh_quiesce(sdata);
break;
default:
break;
}
cancel_work_sync(&sdata->work);
}
int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
struct ieee80211_chanctx *ctx;
if (!local->open_count)
goto suspend;
ieee80211_scan_cancel(local);
if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) {
mutex_lock(&local->sta_mtx);
list_for_each_entry(sta, &local->sta_list, list) {
set_sta_flag(sta, WLAN_STA_BLOCK_BA);
ieee80211_sta_tear_down_BA_sessions(
sta, AGG_STOP_LOCAL_REQUEST);
}
mutex_unlock(&local->sta_mtx);
}
ieee80211_stop_queues_by_reason(hw,
IEEE80211_QUEUE_STOP_REASON_SUSPEND);
/* flush out all packets */
synchronize_net();
drv_flush(local, false);
local->quiescing = true;
/* make quiescing visible to timers everywhere */
mb();
flush_workqueue(local->workqueue);
/* Don't try to run timers while suspended. */
del_timer_sync(&local->sta_cleanup);
/*
* Note that this particular timer doesn't need to be
* restarted at resume.
*/
cancel_work_sync(&local->dynamic_ps_enable_work);
del_timer_sync(&local->dynamic_ps_timer);
local->wowlan = wowlan && local->open_count;
if (local->wowlan) {
int err = drv_suspend(local, wowlan);
if (err < 0) {
local->quiescing = false;
local->wowlan = false;
if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) {
mutex_lock(&local->sta_mtx);
list_for_each_entry(sta,
&local->sta_list, list) {
clear_sta_flag(sta, WLAN_STA_BLOCK_BA);
}
mutex_unlock(&local->sta_mtx);
}
ieee80211_wake_queues_by_reason(hw,
IEEE80211_QUEUE_STOP_REASON_SUSPEND);
return err;
} else if (err > 0) {
WARN_ON(err != 1);
local->wowlan = false;
} else {
list_for_each_entry(sdata, &local->interfaces, list)
if (ieee80211_sdata_running(sdata))
ieee80211_quiesce(sdata);
goto suspend;
}
}
/* disable keys */
list_for_each_entry(sdata, &local->interfaces, list)
ieee80211_disable_keys(sdata);
/* tear down aggregation sessions and remove STAs */
mutex_lock(&local->sta_mtx);
list_for_each_entry(sta, &local->sta_list, list) {
if (sta->uploaded) {
enum ieee80211_sta_state state;
state = sta->sta_state;
for (; state > IEEE80211_STA_NOTEXIST; state--)
WARN_ON(drv_sta_state(local, sta->sdata, sta,
state, state - 1));
}
mesh_plink_quiesce(sta);
}
mutex_unlock(&local->sta_mtx);
/* remove all interfaces */
list_for_each_entry(sdata, &local->interfaces, list) {
static u8 zero_addr[ETH_ALEN] = {};
u32 changed = 0;
if (!ieee80211_sdata_running(sdata))
continue;
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_MONITOR:
/* skip these */
continue;
case NL80211_IFTYPE_STATION:
if (sdata->vif.bss_conf.assoc)
changed = BSS_CHANGED_ASSOC |
BSS_CHANGED_BSSID |
BSS_CHANGED_IDLE;
break;
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_MESH_POINT:
if (sdata->vif.bss_conf.enable_beacon)
changed = BSS_CHANGED_BEACON_ENABLED;
break;
default:
break;
}
ieee80211_quiesce(sdata);
sdata->suspend_bss_conf = sdata->vif.bss_conf;
memset(&sdata->vif.bss_conf, 0, sizeof(sdata->vif.bss_conf));
sdata->vif.bss_conf.idle = true;
if (sdata->suspend_bss_conf.bssid)
sdata->vif.bss_conf.bssid = zero_addr;
/* disable beaconing or remove association */
ieee80211_bss_info_change_notify(sdata, changed);
if (sdata->vif.type == NL80211_IFTYPE_AP &&
rcu_access_pointer(sdata->u.ap.beacon))
drv_stop_ap(local, sdata);
if (local->use_chanctx) {
struct ieee80211_chanctx_conf *conf;
mutex_lock(&local->chanctx_mtx);
conf = rcu_dereference_protected(
sdata->vif.chanctx_conf,
lockdep_is_held(&local->chanctx_mtx));
if (conf) {
ctx = container_of(conf,
struct ieee80211_chanctx,
conf);
drv_unassign_vif_chanctx(local, sdata, ctx);
}
mutex_unlock(&local->chanctx_mtx);
}
drv_remove_interface(local, sdata);
}
sdata = rtnl_dereference(local->monitor_sdata);
if (sdata) {
if (local->use_chanctx) {
struct ieee80211_chanctx_conf *conf;
mutex_lock(&local->chanctx_mtx);
conf = rcu_dereference_protected(
sdata->vif.chanctx_conf,
lockdep_is_held(&local->chanctx_mtx));
if (conf) {
ctx = container_of(conf,
struct ieee80211_chanctx,
conf);
drv_unassign_vif_chanctx(local, sdata, ctx);
}
mutex_unlock(&local->chanctx_mtx);
}
drv_remove_interface(local, sdata);
}
mutex_lock(&local->chanctx_mtx);
list_for_each_entry(ctx, &local->chanctx_list, list)
drv_remove_chanctx(local, ctx);
mutex_unlock(&local->chanctx_mtx);
/* stop hardware - this must stop RX */
if (local->open_count)
ieee80211_stop_device(local);
suspend:
local->suspended = true;
/* need suspended to be visible before quiescing is false */
barrier();
local->quiescing = false;
return 0;
}
/*
* __ieee80211_resume() is a static inline which just calls
* ieee80211_reconfig(), which is also needed for hardware
* hang/firmware failure/etc. recovery.
*/