kernel_optimize_test/arch/arm/boot/dts/highbank.dts
Linus Torvalds ca41cc96b2 Merge branch 'for-v3.7' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull CMA and DMA-mapping updates from Marek Szyprowski:
 "This time the pull request is rather small, because the further
  redesign patches were not ready on time.

  This pull request consists of the patches which extend ARM DMA-mapping
  subsystem with support for CPU coherent (ACP) DMA busses.  The first
  client of the new version is HighBank SATA driver.  The second part of
  the pull request includes various cleanup for both CMA common code and
  ARM DMA-mapping subsystem."

Fix up trivial add-add conflict due to the "dma-coherent" DT property
being added next to the "calxeda,port-phys" property for the Calxeda
AHCI controller.

* 'for-v3.7' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma-mapping: Remove unsed var at arm_coherent_iommu_unmap_page
  ARM: highbank: add coherent DMA setup
  ARM: kill off arch_is_coherent
  ARM: add coherent iommu dma ops
  ARM: add coherent dma ops
  ARM: dma-mapping: Refrain noisy console message
  ARM: dma-mapping: Small logical clean up
  drivers: dma-contiguous: refactor dma_alloc_from_contiguous()
2012-10-02 19:13:12 -07:00

329 lines
6.8 KiB
Plaintext

/*
* Copyright 2011-2012 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
/dts-v1/;
/* First 4KB has pen for secondary cores. */
/memreserve/ 0x00000000 0x0001000;
/ {
model = "Calxeda Highbank";
compatible = "calxeda,highbank";
#address-cells = <1>;
#size-cells = <1>;
clock-ranges;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a9";
reg = <0>;
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
};
cpu@1 {
compatible = "arm,cortex-a9";
reg = <1>;
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
};
cpu@2 {
compatible = "arm,cortex-a9";
reg = <2>;
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
};
cpu@3 {
compatible = "arm,cortex-a9";
reg = <3>;
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
};
};
memory {
name = "memory";
device_type = "memory";
reg = <0x00000000 0xff900000>;
};
chosen {
bootargs = "console=ttyAMA0";
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&intc>;
ranges;
timer@fff10600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xfff10600 0x20>;
interrupts = <1 13 0xf01>;
clocks = <&a9periphclk>;
};
watchdog@fff10620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0xfff10620 0x20>;
interrupts = <1 14 0xf01>;
clocks = <&a9periphclk>;
};
intc: interrupt-controller@fff11000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#size-cells = <0>;
#address-cells = <1>;
interrupt-controller;
reg = <0xfff11000 0x1000>,
<0xfff10100 0x100>;
};
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0xfff12000 0x1000>;
interrupts = <0 70 4>;
cache-unified;
cache-level = <2>;
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>;
};
sata@ffe08000 {
compatible = "calxeda,hb-ahci";
reg = <0xffe08000 0x10000>;
interrupts = <0 83 4>;
calxeda,port-phys = <&combophy5 0 &combophy0 0
&combophy0 1 &combophy0 2
&combophy0 3>;
dma-coherent;
};
sdhci@ffe0e000 {
compatible = "calxeda,hb-sdhci";
reg = <0xffe0e000 0x1000>;
interrupts = <0 90 4>;
clocks = <&eclk>;
};
memory-controller@fff00000 {
compatible = "calxeda,hb-ddr-ctrl";
reg = <0xfff00000 0x1000>;
interrupts = <0 91 4>;
};
ipc@fff20000 {
compatible = "arm,pl320", "arm,primecell";
reg = <0xfff20000 0x1000>;
interrupts = <0 7 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
gpioe: gpio@fff30000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff30000 0x1000>;
interrupts = <0 14 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
gpiof: gpio@fff31000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff31000 0x1000>;
interrupts = <0 15 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
gpiog: gpio@fff32000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff32000 0x1000>;
interrupts = <0 16 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
gpioh: gpio@fff33000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff33000 0x1000>;
interrupts = <0 17 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
timer {
compatible = "arm,sp804", "arm,primecell";
reg = <0xfff34000 0x1000>;
interrupts = <0 18 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
rtc@fff35000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0xfff35000 0x1000>;
interrupts = <0 19 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
serial@fff36000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xfff36000 0x1000>;
interrupts = <0 20 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
smic@fff3a000 {
compatible = "ipmi-smic";
device_type = "ipmi";
reg = <0xfff3a000 0x1000>;
interrupts = <0 24 4>;
reg-size = <4>;
reg-spacing = <4>;
};
sregs@fff3c000 {
compatible = "calxeda,hb-sregs";
reg = <0xfff3c000 0x1000>;
clocks {
#address-cells = <1>;
#size-cells = <0>;
osc: oscillator {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <33333000>;
};
ddrpll: ddrpll {
#clock-cells = <0>;
compatible = "calxeda,hb-pll-clock";
clocks = <&osc>;
reg = <0x108>;
};
a9pll: a9pll {
#clock-cells = <0>;
compatible = "calxeda,hb-pll-clock";
clocks = <&osc>;
reg = <0x100>;
};
a9periphclk: a9periphclk {
#clock-cells = <0>;
compatible = "calxeda,hb-a9periph-clock";
clocks = <&a9pll>;
reg = <0x104>;
};
a9bclk: a9bclk {
#clock-cells = <0>;
compatible = "calxeda,hb-a9bus-clock";
clocks = <&a9pll>;
reg = <0x104>;
};
emmcpll: emmcpll {
#clock-cells = <0>;
compatible = "calxeda,hb-pll-clock";
clocks = <&osc>;
reg = <0x10C>;
};
eclk: eclk {
#clock-cells = <0>;
compatible = "calxeda,hb-emmc-clock";
clocks = <&emmcpll>;
reg = <0x114>;
};
pclk: pclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <150000000>;
};
};
};
sregs@fff3c200 {
compatible = "calxeda,hb-sregs-l2-ecc";
reg = <0xfff3c200 0x100>;
interrupts = <0 71 4 0 72 4>;
};
dma@fff3d000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xfff3d000 0x1000>;
interrupts = <0 92 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
ethernet@fff50000 {
compatible = "calxeda,hb-xgmac";
reg = <0xfff50000 0x1000>;
interrupts = <0 77 4 0 78 4 0 79 4>;
};
ethernet@fff51000 {
compatible = "calxeda,hb-xgmac";
reg = <0xfff51000 0x1000>;
interrupts = <0 80 4 0 81 4 0 82 4>;
};
combophy0: combo-phy@fff58000 {
compatible = "calxeda,hb-combophy";
#phy-cells = <1>;
reg = <0xfff58000 0x1000>;
phydev = <5>;
};
combophy5: combo-phy@fff5d000 {
compatible = "calxeda,hb-combophy";
#phy-cells = <1>;
reg = <0xfff5d000 0x1000>;
phydev = <31>;
};
};
};