kernel_optimize_test/arch/arm64/net
Linus Torvalds dfd437a257 arm64 updates for 5.3:
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
 
 - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
   manage the permissions of executable vmalloc regions more strictly
 
 - Slight performance improvement by keeping softirqs enabled while
   touching the FPSIMD/SVE state (kernel_neon_begin/end)
 
 - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG
   and AXFLAG instructions for floating point comparison flags
   manipulation) and FRINT (rounding floating point numbers to integers)
 
 - Re-instate ARM64_PSEUDO_NMI support which was previously marked as
   BROKEN due to some bugs (now fixed)
 
 - Improve parking of stopped CPUs and implement an arm64-specific
   panic_smp_self_stop() to avoid warning on not being able to stop
   secondary CPUs during panic
 
 - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
   platforms
 
 - perf: DDR performance monitor support for iMX8QXP
 
 - cache_line_size() can now be set from DT or ACPI/PPTT if provided to
   cope with a system cache info not exposed via the CPUID registers
 
 - Avoid warning on hardware cache line size greater than
   ARCH_DMA_MINALIGN if the system is fully coherent
 
 - arm64 do_page_fault() and hugetlb cleanups
 
 - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
 
 - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags'
   introduced in 5.1)
 
 - CONFIG_RANDOMIZE_BASE now enabled in defconfig
 
 - Allow the selection of ARM64_MODULE_PLTS, currently only done via
   RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
   over into the vmalloc area
 
 - Make ZONE_DMA32 configurable
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl0eHqcACgkQa9axLQDI
 XvFyNA/+L+bnkz8m3ncydlqqfXomQn4eJJVQ8Uksb0knJz+1+3CUxxbO4ry4jXZN
 fMkbggYrDPRKpDbsUl0lsRipj7jW9bqan+N37c3SWqCkgb6HqDaHViwxdx6Ec/Uk
 gHudozDSPh/8c7hxGcSyt/CFyuW6b+8eYIQU5rtIgz8aVY2BypBvS/7YtYCbIkx0
 w4CFleRTK1zXD5mJQhrc6jyDx659sVkrAvdhf6YIymOY8nBTv40vwdNo3beJMYp8
 Po/+0Ixu+VkHUNtmYYZQgP/AGH96xiTcRnUqd172JdtRPpCLqnLqwFokXeVIlUKT
 KZFMDPzK+756Ayn4z4huEePPAOGlHbJje8JVNnFyreKhVVcCotW7YPY/oJR10bnc
 eo7yD+DxABTn+93G2yP436bNVa8qO1UqjOBfInWBtnNFJfANIkZweij/MQ6MjaTA
 o7KtviHnZFClefMPoiI7HDzwL8XSmsBDbeQ04s2Wxku1Y2xUHLx4iLmadwLQ1ZPb
 lZMTZP3N/T1554MoURVA1afCjAwiqU3bt1xDUGjbBVjLfSPBAn/25IacsG9Li9AF
 7Rp1M9VhrfLftjFFkB2HwpbhRASOxaOSx+EI3kzEfCtM2O9I1WHgP3rvCdc3l0HU
 tbK0/IggQicNgz7GSZ8xDlWPwwSadXYGLys+xlMZEYd3pDIOiFc=
 =0TDT
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}

 - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
   manage the permissions of executable vmalloc regions more strictly

 - Slight performance improvement by keeping softirqs enabled while
   touching the FPSIMD/SVE state (kernel_neon_begin/end)

 - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new
   XAFLAG and AXFLAG instructions for floating point comparison flags
   manipulation) and FRINT (rounding floating point numbers to integers)

 - Re-instate ARM64_PSEUDO_NMI support which was previously marked as
   BROKEN due to some bugs (now fixed)

 - Improve parking of stopped CPUs and implement an arm64-specific
   panic_smp_self_stop() to avoid warning on not being able to stop
   secondary CPUs during panic

 - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
   platforms

 - perf: DDR performance monitor support for iMX8QXP

 - cache_line_size() can now be set from DT or ACPI/PPTT if provided to
   cope with a system cache info not exposed via the CPUID registers

 - Avoid warning on hardware cache line size greater than
   ARCH_DMA_MINALIGN if the system is fully coherent

 - arm64 do_page_fault() and hugetlb cleanups

 - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)

 - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the
   'arm_boot_flags' introduced in 5.1)

 - CONFIG_RANDOMIZE_BASE now enabled in defconfig

 - Allow the selection of ARM64_MODULE_PLTS, currently only done via
   RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
   over into the vmalloc area

 - Make ZONE_DMA32 configurable

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
  perf: arm_spe: Enable ACPI/Platform automatic module loading
  arm_pmu: acpi: spe: Add initial MADT/SPE probing
  ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
  ACPI/PPTT: Modify node flag detection to find last IDENTICAL
  x86/entry: Simplify _TIF_SYSCALL_EMU handling
  arm64: rename dump_instr as dump_kernel_instr
  arm64/mm: Drop [PTE|PMD]_TYPE_FAULT
  arm64: Implement panic_smp_self_stop()
  arm64: Improve parking of stopped CPUs
  arm64: Expose FRINT capabilities to userspace
  arm64: Expose ARMv8.5 CondM capability to userspace
  arm64: defconfig: enable CONFIG_RANDOMIZE_BASE
  arm64: ARM64_MODULES_PLTS must depend on MODULES
  arm64: bpf: do not allocate executable memory
  arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages
  arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP
  arm64: module: create module allocations without exec permissions
  arm64: Allow user selection of ARM64_MODULE_PLTS
  acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
  arm64: Allow selecting Pseudo-NMI again
  ...
2019-07-08 09:54:55 -07:00
..
bpf_jit_comp.c arm64 updates for 5.3: 2019-07-08 09:54:55 -07:00
bpf_jit.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234 2019-06-19 17:09:07 +02:00
Makefile treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00