kernel_optimize_test/Documentation/sound/oss/CS4232
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

24 lines
665 B
Plaintext

To configure the Crystal CS423x sound chip and activate its DSP functions,
modules may be loaded in this order:
modprobe sound
insmod ad1848
insmod uart401
insmod cs4232 io=* irq=* dma=* dma2=*
This is the meaning of the parameters:
io--I/O address of the Windows Sound System (normally 0x534)
irq--IRQ of this device
dma and dma2--DMA channels (DMA2 may be 0)
On some cards, the board attempts to do non-PnP setup, and fails. If you
have problems, use Linux' PnP facilities.
To get MIDI facilities add
insmod opl3 io=*
where "io" is the I/O address of the OPL3 synthesizer. This will be shown
in /proc/sys/pnp and is normally 0x388.