kernel_optimize_test/arch/arm/mach-omap2
Tony Lindgren 93c43f2561 omap: mux: Do keypad muxing in board-*.c files
This way we get pin muxing out of plat-omap and can convert H4 to use the
new mux functions.

Note that it should be safe to assume we can mux all the keypad pins
except on H4 which may have Menelaus connected.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:39 +03:00
..
include/mach omap4: Move SOC specific code from board file 2010-05-20 11:17:51 -07:00
board-2430sdp.c omap: mux: Select POP package for 2430SDP 2010-07-05 16:31:38 +03:00
board-3430sdp.c arm: omap: switch over to gpio_set_debounce 2010-05-27 09:12:42 -07:00
board-3630sdp.c omap3: 3630sdp: Explicitly enable all UARTs 2010-03-15 16:34:19 -05:00
board-4430sdp.c omap4: Adding hsmmc support to board file 2010-05-20 11:21:21 -07:00
board-am3517evm.c AM3517: rename the i2c boardinfo to make it more readable 2010-05-20 11:18:29 -07:00
board-apollon.c omap: mux: Select POP package for Apollon 2010-07-05 16:31:37 +03:00
board-cm-t35.c omap3: Fix compile for board-cm-t35 2010-05-04 13:19:16 -07:00
board-devkit8000.c omap: Devkit8000: Add mux initialization 2010-05-20 10:48:57 -07:00
board-generic.c
board-h4.c omap: mux: Do keypad muxing in board-*.c files 2010-07-05 16:31:39 +03:00
board-igep0020.c omap3: Fix EHCI port for IGEP v2 board 2010-04-23 15:35:11 -07:00
board-ldp.c arm: omap: switch over to gpio_set_debounce 2010-05-27 09:12:42 -07:00
board-n8x0.c omap: mux: Select POP package for N8X0 2010-07-05 16:31:38 +03:00
board-omap3beagle.c board-omap3-beagle: add DSS2 support 2010-05-18 15:06:07 +03:00
board-omap3evm.c arm: omap: switch over to gpio_set_debounce 2010-05-27 09:12:42 -07:00
board-omap3pandora.c arm: omap: switch over to gpio_set_debounce 2010-05-27 09:12:42 -07:00
board-omap3stalker.c omap: Stalker board: switch over to gpio_set_debounce 2010-06-09 13:53:05 +03:00
board-omap3touchbook.c arm: omap: switch over to gpio_set_debounce 2010-05-27 09:12:42 -07:00
board-overo.c omap: Overo: Add support for second ethernet port 2010-05-20 10:53:55 -07:00
board-rx51-peripherals.c Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux 2010-05-21 15:20:57 -07:00
board-rx51-sdram.c
board-rx51-video.c OMAP: RX51: Add LCD Panel support 2010-05-18 15:06:02 +03:00
board-rx51.c OMAP: RX51: Add LCD Panel support 2010-05-18 15:06:02 +03:00
board-sdp-flash.c omap: board-sdp-flash.c: Fix typos in debug output 2010-04-23 15:37:24 -07:00
board-zoom2.c omap2/3: Fix DEBUG_LL for omap zoom2/3 2010-05-03 17:53:08 -07:00
board-zoom3.c omap2/3: Fix DEBUG_LL for omap zoom2/3 2010-05-03 17:53:08 -07:00
board-zoom-debugboard.c omap2/3: Fix DEBUG_LL for omap zoom2/3 2010-05-03 17:53:08 -07:00
board-zoom-peripherals.c omap3: zoom2/3 / 3630sdp: Don't init always all uarts 2010-03-15 16:34:17 -05:00
clkt2xxx_apll.c OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
clkt2xxx_dpllcore.c
clkt2xxx_osc.c
clkt2xxx_sys.c
clkt2xxx_virt_prcm_set.c OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y 2010-05-20 12:31:14 -06:00
clkt34xx_dpll3m2.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clkt_clksel.c OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clkt_dpll.c
clock2xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock2xxx.h OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3xxx_data.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2010-05-21 14:46:51 -07:00
clock3xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock3xxx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx_data.c OMAP4: clock: Fix multi-omap boot with reset un-used clocks 2010-06-16 19:01:33 +03:00
clock44xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock2420_data.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2010-05-21 14:46:51 -07:00
clock2430_data.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2010-05-21 14:46:51 -07:00
clock2430.c OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3517.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock3517.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock_common_data.c OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality 2010-05-20 12:31:07 -06:00
clock.c OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clock.h OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clockdomain.c OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
clockdomains44xx.h OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention 2010-05-20 12:31:11 -06:00
clockdomains.h
cm4xxx.c OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function 2010-05-20 12:31:08 -06:00
cm44xx.h OMAP4: PRCM: Add offset defines for all CM registers 2010-05-20 12:31:12 -06:00
cm-regbits-24xx.h OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
cm-regbits-34xx.h OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
cm-regbits-44xx.h
cm.c OMAP: CM: Move MAX_MODULE_READY_TIME to cm.h 2010-05-20 12:31:08 -06:00
cm.h OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function 2010-05-20 12:31:08 -06:00
control.c OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
cpuidle34xx.c
devices.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2010-05-21 14:46:51 -07:00
dpll3xxx.c
emu.c
gpmc-nand.c omap: fix a gpmc nand problem 2010-04-23 15:35:11 -07:00
gpmc-onenand.c
gpmc-smc91x.c
gpmc.c
hsmmc.c omap4: Adding PBIAS Configuration for MMC1 Controller 2010-05-20 11:21:22 -07:00
hsmmc.h
i2c.c omap: i2c: Fix muxing for command line enabled bus 2010-02-25 14:45:08 -08:00
id.c Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus 2010-02-24 20:53:03 -08:00
io.c omap2/3: Fix DEBUG_LL for omap zoom2/3 2010-05-03 17:53:08 -07:00
iommu2.c omap iommu: move iommu_disable at fault to the above layer 2010-06-29 07:55:07 +03:00
irq.c
Kconfig omap: mux: Select POP package for 2430SDP 2010-07-05 16:31:38 +03:00
mailbox.c omap2/3/4: mailbox: remove compiler warning 2010-03-11 14:50:00 -08:00
Makefile omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
Makefile.boot
mcbsp.c Merge branch 'topic/asoc' into for-linus 2010-05-20 12:00:43 +02:00
mux34xx.c omap: mux: Remove unncessary parens from mux34xx.c 2010-07-05 16:31:36 +03:00
mux34xx.h
mux2420.c omap: mux: Add data for 2420 2010-07-05 16:31:36 +03:00
mux2420.h omap: mux: Add data for 2420 2010-07-05 16:31:36 +03:00
mux2430.c omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
mux2430.h omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
mux.c omap: mux: Allow compiling in new mux code on all mach-omap2 systems 2010-07-05 16:31:36 +03:00
mux.h omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
omap4-common.c omap4: Move SOC specific code from board file 2010-05-20 11:17:51 -07:00
omap44xx-smc.S omap4: Fix build break when used with gcc-4.4.1 (2009-q3) 2010-04-23 15:35:11 -07:00
omap_hwmod_3xxx_data.c OMAP: hwmod: Rename hwmod name for the MPU 2010-05-20 12:31:10 -06:00
omap_hwmod_2420_data.c OMAP: hwmod: Rename hwmod name for the MPU 2010-05-20 12:31:10 -06:00
omap_hwmod_2430_data.c OMAP: hwmod: Rename hwmod name for the MPU 2010-05-20 12:31:10 -06:00
omap_hwmod_common_data.c OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod_common_data.h OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod.c OMAP: hwmod: Fix the missing braces 2010-06-23 18:15:12 -06:00
omap-headsmp.S omap4: Fix build break when used with gcc-4.4.1 (2009-q3) 2010-04-23 15:35:11 -07:00
omap-iommu.c omap iommu: update ducati mmu irq define name 2010-06-29 07:55:08 +03:00
omap-smp.c omap4: Move SOC specific code from board file 2010-05-20 11:17:51 -07:00
opp2xxx.h
opp2420_data.c
opp2430_data.c
pm24xx.c OMAP2+ PRCM: convert remaining PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
pm34xx.c OMAP3: PM: fix IO daisy chain enable to use PM_WKEN reg 2010-06-10 15:37:41 +03:00
pm-debug.c OMAP3: PM: Add milliseconds interface to suspend wakeup timer 2010-05-12 09:39:00 -07:00
pm.h OMAP3: PM: Add milliseconds interface to suspend wakeup timer 2010-05-12 09:39:00 -07:00
powerdomain.c OMAP powerdomain, hwmod, omap_device: add some credits 2010-05-20 12:31:14 -06:00
powerdomains24xx.h
powerdomains34xx.h
powerdomains44xx.h OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains 2010-05-20 12:31:13 -06:00
powerdomains.h
prcm-common.h OMAP4: PRCM: Remove duplicate definition of base addresses 2010-05-20 12:31:12 -06:00
prcm.c OMAP2+ PRCM: convert remaining PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
prm44xx.h OMAP4: PRCM: Add offset defines for all PRM registers 2010-05-20 12:31:12 -06:00
prm-regbits-24xx.h OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
prm-regbits-34xx.h OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
prm-regbits-44xx.h
prm.h OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention 2010-05-20 12:31:11 -06:00
sdram-hynix-h8mbx00u0mer-0em.h
sdram-micron-mt46h32m32lf-6.h
sdram-numonyx-m65kxxxxam.h
sdram-qimonda-hyb18m512160af-6.h
sdrc2xxx.c
sdrc.c
sdrc.h
serial.c omap2/3/4: serial: Remove condition for getting uart4_phys 2010-03-15 16:34:16 -05:00
sleep24xx.S
sleep34xx.S
sram34xx.S
sram242x.S
sram243x.S
timer-gp.c OMAP4: clock: Remove clock hacks from timer-gp.c 2010-02-24 17:45:17 -07:00
timer-mpu.c
usb-ehci.c omap: fix build failure due to missing include dma-mapping.h 2010-06-09 13:53:05 +03:00
usb-fs.c omap: mux: Make omap2 FS USB code use new mux functions 2010-07-05 16:31:38 +03:00
usb-musb.c usb: musb: Add extvbus in musb_board_data 2010-05-20 13:21:36 -07:00
usb-tusb6010.c