forked from luck/tmp_suning_uos_patched
95006188cb
This patch adds ATAPI support to the sata_promise driver. This has been tested on both first- and second-generation chips (20378 and 20575), and with both SATAPI and PATAPI devices. CD-writing works. SATAPI DMA works on second-generation chips, but on first-generation chips SATAPI is limited to PIO due to what appears to be HW limitations. PATAPI DMA works on both first- and second-generation chips, but requires the separate PATA support patch before it can be used on TX2plus chips. The functional changes to the driver are: - remove ATA_FLAG_NO_ATAPI from PDC_COMMON_FLAGS - add ->check_atapi_dma() operation to enable DMA for bulk data transfers but force PIO for other ATAPI commands; this filter is from Promise's driver and largely matches pata_pdc207x.c - use a more restrictive ->check_atapi_dma() on first-generation chips to force SATAPI to always use PIO - add handling of ATAPI protocols to pdc_qc_prep(), pdc_host_intr(), and pdc_qc_issue_prot(): ATAPI_DMA is handled by the driver while non-DMA protocols are handed over to libata generic code - add pdc_issue_atapi_pkt_cmd() to handle the initial steps in issuing ATAPI DMA commands before sending the actual CDB; this procedure was ported from Promise's driver Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org> |
||
---|---|---|
.. | ||
acorn | ||
acpi | ||
amba | ||
ata | ||
atm | ||
base | ||
block | ||
bluetooth | ||
cdrom | ||
char | ||
clocksource | ||
connector | ||
cpufreq | ||
crypto | ||
dio | ||
dma | ||
edac | ||
eisa | ||
fc4 | ||
firmware | ||
hid | ||
hwmon | ||
i2c | ||
ide | ||
ieee1394 | ||
infiniband | ||
input | ||
isdn | ||
kvm | ||
leds | ||
macintosh | ||
mca | ||
md | ||
media | ||
message | ||
mfd | ||
misc | ||
mmc | ||
mtd | ||
net | ||
nubus | ||
oprofile | ||
parisc | ||
parport | ||
pci | ||
pcmcia | ||
pnp | ||
ps3 | ||
rapidio | ||
rtc | ||
s390 | ||
sbus | ||
scsi | ||
serial | ||
sh | ||
sn | ||
spi | ||
tc | ||
telephony | ||
usb | ||
video | ||
w1 | ||
zorro | ||
Kconfig | ||
Makefile |