forked from luck/tmp_suning_uos_patched
9a0b5817ad
Implement SMP alternatives, i.e. switching at runtime between different
code versions for UP and SMP. The code can patch both SMP->UP and UP->SMP.
The UP->SMP case is useful for CPU hotplug.
With CONFIG_CPU_HOTPLUG enabled the code switches to UP at boot time and
when the number of CPUs goes down to 1, and switches to SMP when the number
of CPUs goes up to 2.
Without CONFIG_CPU_HOTPLUG or on non-SMP-capable systems the code is
patched once at boot time (if needed) and the tables are released
afterwards.
The changes in detail:
* The current alternatives bits are moved to a separate file,
the SMP alternatives code is added there.
* The patch adds some new elf sections to the kernel:
.smp_altinstructions
like .altinstructions, also contains a list
of alt_instr structs.
.smp_altinstr_replacement
like .altinstr_replacement, but also has some space to
save original instruction before replaving it.
.smp_locks
list of pointers to lock prefixes which can be nop'ed
out on UP.
The first two are used to replace more complex instruction
sequences such as spinlocks and semaphores. It would be possible
to deal with the lock prefixes with that as well, but by handling
them as special case the table sizes become much smaller.
* The sections are page-aligned and padded up to page size, so they
can be free if they are not needed.
* Splitted the code to release init pages to a separate function and
use it to release the elf sections if they are unused.
Signed-off-by: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
79 lines
2.8 KiB
Makefile
79 lines
2.8 KiB
Makefile
#
|
|
# Makefile for the linux kernel.
|
|
#
|
|
|
|
extra-y := head.o init_task.o vmlinux.lds
|
|
|
|
obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \
|
|
ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
|
|
pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \
|
|
quirks.o i8237.o topology.o alternative.o
|
|
|
|
obj-y += cpu/
|
|
obj-y += timers/
|
|
obj-y += acpi/
|
|
obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o
|
|
obj-$(CONFIG_MCA) += mca.o
|
|
obj-$(CONFIG_X86_MSR) += msr.o
|
|
obj-$(CONFIG_X86_CPUID) += cpuid.o
|
|
obj-$(CONFIG_MICROCODE) += microcode.o
|
|
obj-$(CONFIG_APM) += apm.o
|
|
obj-$(CONFIG_X86_SMP) += smp.o smpboot.o
|
|
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
|
|
obj-$(CONFIG_X86_MPPARSE) += mpparse.o
|
|
obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o
|
|
obj-$(CONFIG_X86_IO_APIC) += io_apic.o
|
|
obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups.o
|
|
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
|
|
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
|
|
obj-$(CONFIG_X86_NUMAQ) += numaq.o
|
|
obj-$(CONFIG_X86_SUMMIT_NUMA) += summit.o
|
|
obj-$(CONFIG_KPROBES) += kprobes.o
|
|
obj-$(CONFIG_MODULES) += module.o
|
|
obj-y += sysenter.o vsyscall.o
|
|
obj-$(CONFIG_ACPI_SRAT) += srat.o
|
|
obj-$(CONFIG_HPET_TIMER) += time_hpet.o
|
|
obj-$(CONFIG_EFI) += efi.o efi_stub.o
|
|
obj-$(CONFIG_DOUBLEFAULT) += doublefault.o
|
|
obj-$(CONFIG_VM86) += vm86.o
|
|
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
|
|
|
EXTRA_AFLAGS := -traditional
|
|
|
|
obj-$(CONFIG_SCx200) += scx200.o
|
|
|
|
# vsyscall.o contains the vsyscall DSO images as __initdata.
|
|
# We must build both images before we can assemble it.
|
|
# Note: kbuild does not track this dependency due to usage of .incbin
|
|
$(obj)/vsyscall.o: $(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so
|
|
targets += $(foreach F,int80 sysenter,vsyscall-$F.o vsyscall-$F.so)
|
|
targets += vsyscall-note.o vsyscall.lds
|
|
|
|
# The DSO images are built using a special linker script.
|
|
quiet_cmd_syscall = SYSCALL $@
|
|
cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \
|
|
-Wl,-T,$(filter-out FORCE,$^) -o $@
|
|
|
|
export CPPFLAGS_vsyscall.lds += -P -C -U$(ARCH)
|
|
|
|
vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1
|
|
SYSCFLAGS_vsyscall-sysenter.so = $(vsyscall-flags)
|
|
SYSCFLAGS_vsyscall-int80.so = $(vsyscall-flags)
|
|
|
|
$(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so: \
|
|
$(obj)/vsyscall-%.so: $(src)/vsyscall.lds \
|
|
$(obj)/vsyscall-%.o $(obj)/vsyscall-note.o FORCE
|
|
$(call if_changed,syscall)
|
|
|
|
# We also create a special relocatable object that should mirror the symbol
|
|
# table and layout of the linked DSO. With ld -R we can then refer to
|
|
# these symbols in the kernel code rather than hand-coded addresses.
|
|
extra-y += vsyscall-syms.o
|
|
$(obj)/built-in.o: $(obj)/vsyscall-syms.o
|
|
$(obj)/built-in.o: ld_flags += -R $(obj)/vsyscall-syms.o
|
|
|
|
SYSCFLAGS_vsyscall-syms.o = -r
|
|
$(obj)/vsyscall-syms.o: $(src)/vsyscall.lds \
|
|
$(obj)/vsyscall-sysenter.o $(obj)/vsyscall-note.o FORCE
|
|
$(call if_changed,syscall)
|