kernel_optimize_test/drivers/scsi/sym53c8xx_2
Tony Battersby cedefa13db [SCSI] sym53c8xx: fix "irq X: nobody cared" regression
The patch described by the following excerpt from ChangeLog-2.6.24-rc1
eventually causes a "irq X: nobody cared" error after a while:

commit 99c9e0a1d6
Author: Matthew Wilcox <matthew@wil.cx>
Date:   Fri Oct 5 15:55:12 2007 -0400

    [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE

After this happens, the kernel disables the IRQ, causing the SCSI card
to stop working until the next reboot.  The problem is caused by the
interrupt handler returning IRQ_NONE instead of IRQ_HANDLED after
handling an interrupt-on-the-fly (INTF) condition.  The following patch
fixes the problem.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Acked-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-18 16:04:09 -06:00
..
Makefile Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
sym53c8xx.h [SCSI] sym53c8xx: Remove tag_ctrl module parameter 2007-10-23 15:11:57 -04:00
sym_defs.h [SCSI] Version 2.2.3 2006-04-13 10:13:26 -05:00
sym_fw1.h Fix misspellings of "agressive". 2007-02-17 19:20:16 +01:00
sym_fw2.h Spelling fix: explicitly 2007-10-19 23:22:55 +02:00
sym_fw.c [SCSI] sym53c8xx: Remove pci_dev pointer from sym_shcb 2007-10-23 15:26:34 -04:00
sym_fw.h [SCSI] sym53c8xx: Remove pci_dev pointer from sym_shcb 2007-10-23 15:26:34 -04:00
sym_glue.c [SCSI] sym53c8xx: fix free_irq() regression 2007-12-18 16:03:09 -06:00
sym_glue.h [SCSI] sym53c8xx: Remove sym_xpt_async_sent_bdr 2007-10-23 15:26:56 -04:00
sym_hipd.c [SCSI] sym53c8xx: fix "irq X: nobody cared" regression 2007-12-18 16:04:09 -06:00
sym_hipd.h [SCSI] sym53c8xx: Remove pci_dev pointer from sym_shcb 2007-10-23 15:26:34 -04:00
sym_malloc.c [SCSI] sym2: Remove FreeBSD ifdefs 2005-12-13 18:11:27 -07:00
sym_misc.h Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
sym_nvram.c [SCSI] sym53c8xx: Remove ->device_id 2007-10-23 15:11:10 -04:00
sym_nvram.h [SCSI] sym2: Allow NVRAM settings to limit speed and width 2005-12-13 18:11:45 -07:00