kernel_optimize_test/arch/arm/plat-mxc/ssi-fiq.S
Dave Martin 0575b4b83e ARM: mxc: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL
Directives such as .long and .word do not magically cause the
assembler location counter to become aligned in gas.  As a
result, using these directives in code sections can result in
misaligned data words when building a Thumb-2 kernel
(CONFIG_THUMB2_KERNEL).

This is a Bad Thing, since the ABI permits the compiler to
assume that fundamental types of word size or above are word-
aligned when accessing them from C.  If the data is not really
word-aligned, this can cause impaired performance and stray
alignment faults in some circumstances.

In general, the following rules should be applied when using
data word declaration directives inside code sections:

    * .quad and .double:
         .align 3

    * .long, .word, .single, .float:
         .align (or .align 2)

    * .short:
        No explicit alignment required, since Thumb-2
        instructions are always 2 or 4 bytes in size.
        immediately after an instruction.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
LAKML-Reference: 1289913217-8672-1-git-send-email-dave.martin@linaro.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-04-12 09:48:10 +02:00

137 lines
2.5 KiB
ArmAsm

/*
* Copyright (C) 2009 Sascha Hauer <s.hauer@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
/*
* r8 = bit 0-15: tx offset, bit 16-31: tx buffer size
* r9 = bit 0-15: rx offset, bit 16-31: rx buffer size
*/
#define SSI_STX0 0x00
#define SSI_SRX0 0x08
#define SSI_SISR 0x14
#define SSI_SIER 0x18
#define SSI_SACNT 0x38
#define SSI_SACNT_AC97EN (1 << 0)
#define SSI_SIER_TFE0_EN (1 << 0)
#define SSI_SISR_TFE0 (1 << 0)
#define SSI_SISR_RFF0 (1 << 2)
#define SSI_SIER_RFF0_EN (1 << 2)
.text
.global imx_ssi_fiq_start
.global imx_ssi_fiq_end
.global imx_ssi_fiq_base
.global imx_ssi_fiq_rx_buffer
.global imx_ssi_fiq_tx_buffer
imx_ssi_fiq_start:
ldr r12, imx_ssi_fiq_base
/* TX */
ldr r11, imx_ssi_fiq_tx_buffer
/* shall we send? */
ldr r13, [r12, #SSI_SIER]
tst r13, #SSI_SIER_TFE0_EN
beq 1f
/* TX FIFO empty? */
ldr r13, [r12, #SSI_SISR]
tst r13, #SSI_SISR_TFE0
beq 1f
mov r10, #0x10000
sub r10, #1
and r10, r10, r8 /* r10: current buffer offset */
add r11, r11, r10
ldrh r13, [r11]
strh r13, [r12, #SSI_STX0]
ldrh r13, [r11, #2]
strh r13, [r12, #SSI_STX0]
ldrh r13, [r11, #4]
strh r13, [r12, #SSI_STX0]
ldrh r13, [r11, #6]
strh r13, [r12, #SSI_STX0]
add r10, #8
lsr r13, r8, #16 /* r13: buffer size */
cmp r10, r13
lslgt r8, r13, #16
addle r8, #8
1:
/* RX */
/* shall we receive? */
ldr r13, [r12, #SSI_SIER]
tst r13, #SSI_SIER_RFF0_EN
beq 1f
/* RX FIFO full? */
ldr r13, [r12, #SSI_SISR]
tst r13, #SSI_SISR_RFF0
beq 1f
ldr r11, imx_ssi_fiq_rx_buffer
mov r10, #0x10000
sub r10, #1
and r10, r10, r9 /* r10: current buffer offset */
add r11, r11, r10
ldr r13, [r12, #SSI_SACNT]
tst r13, #SSI_SACNT_AC97EN
ldr r13, [r12, #SSI_SRX0]
strh r13, [r11]
ldr r13, [r12, #SSI_SRX0]
strh r13, [r11, #2]
/* dummy read to skip slot 12 */
ldrne r13, [r12, #SSI_SRX0]
ldr r13, [r12, #SSI_SRX0]
strh r13, [r11, #4]
ldr r13, [r12, #SSI_SRX0]
strh r13, [r11, #6]
/* dummy read to skip slot 12 */
ldrne r13, [r12, #SSI_SRX0]
add r10, #8
lsr r13, r9, #16 /* r13: buffer size */
cmp r10, r13
lslgt r9, r13, #16
addle r9, #8
1:
@ return from FIQ
subs pc, lr, #4
.align
imx_ssi_fiq_base:
.word 0x0
imx_ssi_fiq_rx_buffer:
.word 0x0
imx_ssi_fiq_tx_buffer:
.word 0x0
imx_ssi_fiq_end: