forked from luck/tmp_suning_uos_patched
d0d5049fb0
Ensure the the device_driver and usb_gadget_driver have their .owner fields initialised to associate the module owner to the driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2660 lines
66 KiB
C
2660 lines
66 KiB
C
/*
|
|
* linux/drivers/usb/gadget/pxa2xx_udc.c
|
|
* Intel PXA25x and IXP4xx on-chip full speed USB device controllers
|
|
*
|
|
* Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker)
|
|
* Copyright (C) 2003 Robert Schwebel, Pengutronix
|
|
* Copyright (C) 2003 Benedikt Spranger, Pengutronix
|
|
* Copyright (C) 2003 David Brownell
|
|
* Copyright (C) 2003 Joshua Wise
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#undef DEBUG
|
|
// #define VERBOSE DBG_VERBOSE
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/types.h>
|
|
#include <linux/version.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/list.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/system.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/unaligned.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/arch/pxa-regs.h>
|
|
|
|
#include <linux/usb_ch9.h>
|
|
#include <linux/usb_gadget.h>
|
|
|
|
#include <asm/arch/udc.h>
|
|
|
|
|
|
/*
|
|
* This driver handles the USB Device Controller (UDC) in Intel's PXA 25x
|
|
* series processors. The UDC for the IXP 4xx series is very similar.
|
|
* There are fifteen endpoints, in addition to ep0.
|
|
*
|
|
* Such controller drivers work with a gadget driver. The gadget driver
|
|
* returns descriptors, implements configuration and data protocols used
|
|
* by the host to interact with this device, and allocates endpoints to
|
|
* the different protocol interfaces. The controller driver virtualizes
|
|
* usb hardware so that the gadget drivers will be more portable.
|
|
*
|
|
* This UDC hardware wants to implement a bit too much USB protocol, so
|
|
* it constrains the sorts of USB configuration change events that work.
|
|
* The errata for these chips are misleading; some "fixed" bugs from
|
|
* pxa250 a0/a1 b0/b1/b2 sure act like they're still there.
|
|
*/
|
|
|
|
#define DRIVER_VERSION "4-May-2005"
|
|
#define DRIVER_DESC "PXA 25x USB Device Controller driver"
|
|
|
|
|
|
static const char driver_name [] = "pxa2xx_udc";
|
|
|
|
static const char ep0name [] = "ep0";
|
|
|
|
|
|
// #define USE_DMA
|
|
// #define USE_OUT_DMA
|
|
// #define DISABLE_TEST_MODE
|
|
|
|
#ifdef CONFIG_ARCH_IXP4XX
|
|
#undef USE_DMA
|
|
|
|
/* cpu-specific register addresses are compiled in to this code */
|
|
#ifdef CONFIG_ARCH_PXA
|
|
#error "Can't configure both IXP and PXA"
|
|
#endif
|
|
|
|
#endif
|
|
|
|
#include "pxa2xx_udc.h"
|
|
|
|
|
|
#ifdef USE_DMA
|
|
static int use_dma = 1;
|
|
module_param(use_dma, bool, 0);
|
|
MODULE_PARM_DESC (use_dma, "true to use dma");
|
|
|
|
static void dma_nodesc_handler (int dmach, void *_ep, struct pt_regs *r);
|
|
static void kick_dma(struct pxa2xx_ep *ep, struct pxa2xx_request *req);
|
|
|
|
#ifdef USE_OUT_DMA
|
|
#define DMASTR " (dma support)"
|
|
#else
|
|
#define DMASTR " (dma in)"
|
|
#endif
|
|
|
|
#else /* !USE_DMA */
|
|
#define DMASTR " (pio only)"
|
|
#undef USE_OUT_DMA
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_PXA2XX_SMALL
|
|
#define SIZE_STR " (small)"
|
|
#else
|
|
#define SIZE_STR ""
|
|
#endif
|
|
|
|
#ifdef DISABLE_TEST_MODE
|
|
/* (mode == 0) == no undocumented chip tweaks
|
|
* (mode & 1) == double buffer bulk IN
|
|
* (mode & 2) == double buffer bulk OUT
|
|
* ... so mode = 3 (or 7, 15, etc) does it for both
|
|
*/
|
|
static ushort fifo_mode = 0;
|
|
module_param(fifo_mode, ushort, 0);
|
|
MODULE_PARM_DESC (fifo_mode, "pxa2xx udc fifo mode");
|
|
#endif
|
|
|
|
/* ---------------------------------------------------------------------------
|
|
* endpoint related parts of the api to the usb controller hardware,
|
|
* used by gadget driver; and the inner talker-to-hardware core.
|
|
* ---------------------------------------------------------------------------
|
|
*/
|
|
|
|
static void pxa2xx_ep_fifo_flush (struct usb_ep *ep);
|
|
static void nuke (struct pxa2xx_ep *, int status);
|
|
|
|
static void pio_irq_enable(int bEndpointAddress)
|
|
{
|
|
bEndpointAddress &= 0xf;
|
|
if (bEndpointAddress < 8)
|
|
UICR0 &= ~(1 << bEndpointAddress);
|
|
else {
|
|
bEndpointAddress -= 8;
|
|
UICR1 &= ~(1 << bEndpointAddress);
|
|
}
|
|
}
|
|
|
|
static void pio_irq_disable(int bEndpointAddress)
|
|
{
|
|
bEndpointAddress &= 0xf;
|
|
if (bEndpointAddress < 8)
|
|
UICR0 |= 1 << bEndpointAddress;
|
|
else {
|
|
bEndpointAddress -= 8;
|
|
UICR1 |= 1 << bEndpointAddress;
|
|
}
|
|
}
|
|
|
|
/* The UDCCR reg contains mask and interrupt status bits,
|
|
* so using '|=' isn't safe as it may ack an interrupt.
|
|
*/
|
|
#define UDCCR_MASK_BITS (UDCCR_REM | UDCCR_SRM | UDCCR_UDE)
|
|
|
|
static inline void udc_set_mask_UDCCR(int mask)
|
|
{
|
|
UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS);
|
|
}
|
|
|
|
static inline void udc_clear_mask_UDCCR(int mask)
|
|
{
|
|
UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS);
|
|
}
|
|
|
|
static inline void udc_ack_int_UDCCR(int mask)
|
|
{
|
|
/* udccr contains the bits we dont want to change */
|
|
__u32 udccr = UDCCR & UDCCR_MASK_BITS;
|
|
|
|
UDCCR = udccr | (mask & ~UDCCR_MASK_BITS);
|
|
}
|
|
|
|
/*
|
|
* endpoint enable/disable
|
|
*
|
|
* we need to verify the descriptors used to enable endpoints. since pxa2xx
|
|
* endpoint configurations are fixed, and are pretty much always enabled,
|
|
* there's not a lot to manage here.
|
|
*
|
|
* because pxa2xx can't selectively initialize bulk (or interrupt) endpoints,
|
|
* (resetting endpoint halt and toggle), SET_INTERFACE is unusable except
|
|
* for a single interface (with only the default altsetting) and for gadget
|
|
* drivers that don't halt endpoints (not reset by set_interface). that also
|
|
* means that if you use ISO, you must violate the USB spec rule that all
|
|
* iso endpoints must be in non-default altsettings.
|
|
*/
|
|
static int pxa2xx_ep_enable (struct usb_ep *_ep,
|
|
const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
struct pxa2xx_ep *ep;
|
|
struct pxa2xx_udc *dev;
|
|
|
|
ep = container_of (_ep, struct pxa2xx_ep, ep);
|
|
if (!_ep || !desc || ep->desc || _ep->name == ep0name
|
|
|| desc->bDescriptorType != USB_DT_ENDPOINT
|
|
|| ep->bEndpointAddress != desc->bEndpointAddress
|
|
|| ep->fifo_size < le16_to_cpu
|
|
(desc->wMaxPacketSize)) {
|
|
DMSG("%s, bad ep or descriptor\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* xfer types must match, except that interrupt ~= bulk */
|
|
if (ep->bmAttributes != desc->bmAttributes
|
|
&& ep->bmAttributes != USB_ENDPOINT_XFER_BULK
|
|
&& desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
|
|
DMSG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* hardware _could_ do smaller, but driver doesn't */
|
|
if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
|
|
&& le16_to_cpu (desc->wMaxPacketSize)
|
|
!= BULK_FIFO_SIZE)
|
|
|| !desc->wMaxPacketSize) {
|
|
DMSG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name);
|
|
return -ERANGE;
|
|
}
|
|
|
|
dev = ep->dev;
|
|
if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
|
|
DMSG("%s, bogus device state\n", __FUNCTION__);
|
|
return -ESHUTDOWN;
|
|
}
|
|
|
|
ep->desc = desc;
|
|
ep->dma = -1;
|
|
ep->stopped = 0;
|
|
ep->pio_irqs = ep->dma_irqs = 0;
|
|
ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize);
|
|
|
|
/* flush fifo (mostly for OUT buffers) */
|
|
pxa2xx_ep_fifo_flush (_ep);
|
|
|
|
/* ... reset halt state too, if we could ... */
|
|
|
|
#ifdef USE_DMA
|
|
/* for (some) bulk and ISO endpoints, try to get a DMA channel and
|
|
* bind it to the endpoint. otherwise use PIO.
|
|
*/
|
|
switch (ep->bmAttributes) {
|
|
case USB_ENDPOINT_XFER_ISOC:
|
|
if (le16_to_cpu(desc->wMaxPacketSize) % 32)
|
|
break;
|
|
// fall through
|
|
case USB_ENDPOINT_XFER_BULK:
|
|
if (!use_dma || !ep->reg_drcmr)
|
|
break;
|
|
ep->dma = pxa_request_dma ((char *)_ep->name,
|
|
(le16_to_cpu (desc->wMaxPacketSize) > 64)
|
|
? DMA_PRIO_MEDIUM /* some iso */
|
|
: DMA_PRIO_LOW,
|
|
dma_nodesc_handler, ep);
|
|
if (ep->dma >= 0) {
|
|
*ep->reg_drcmr = DRCMR_MAPVLD | ep->dma;
|
|
DMSG("%s using dma%d\n", _ep->name, ep->dma);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
DBG(DBG_VERBOSE, "enabled %s\n", _ep->name);
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_ep_disable (struct usb_ep *_ep)
|
|
{
|
|
struct pxa2xx_ep *ep;
|
|
unsigned long flags;
|
|
|
|
ep = container_of (_ep, struct pxa2xx_ep, ep);
|
|
if (!_ep || !ep->desc) {
|
|
DMSG("%s, %s not enabled\n", __FUNCTION__,
|
|
_ep ? ep->ep.name : NULL);
|
|
return -EINVAL;
|
|
}
|
|
local_irq_save(flags);
|
|
|
|
nuke (ep, -ESHUTDOWN);
|
|
|
|
#ifdef USE_DMA
|
|
if (ep->dma >= 0) {
|
|
*ep->reg_drcmr = 0;
|
|
pxa_free_dma (ep->dma);
|
|
ep->dma = -1;
|
|
}
|
|
#endif
|
|
|
|
/* flush fifo (mostly for IN buffers) */
|
|
pxa2xx_ep_fifo_flush (_ep);
|
|
|
|
ep->desc = NULL;
|
|
ep->stopped = 1;
|
|
|
|
local_irq_restore(flags);
|
|
DBG(DBG_VERBOSE, "%s disabled\n", _ep->name);
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* for the pxa2xx, these can just wrap kmalloc/kfree. gadget drivers
|
|
* must still pass correctly initialized endpoints, since other controller
|
|
* drivers may care about how it's currently set up (dma issues etc).
|
|
*/
|
|
|
|
/*
|
|
* pxa2xx_ep_alloc_request - allocate a request data structure
|
|
*/
|
|
static struct usb_request *
|
|
pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
|
|
{
|
|
struct pxa2xx_request *req;
|
|
|
|
req = kmalloc (sizeof *req, gfp_flags);
|
|
if (!req)
|
|
return NULL;
|
|
|
|
memset (req, 0, sizeof *req);
|
|
INIT_LIST_HEAD (&req->queue);
|
|
return &req->req;
|
|
}
|
|
|
|
|
|
/*
|
|
* pxa2xx_ep_free_request - deallocate a request data structure
|
|
*/
|
|
static void
|
|
pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
|
|
{
|
|
struct pxa2xx_request *req;
|
|
|
|
req = container_of (_req, struct pxa2xx_request, req);
|
|
WARN_ON (!list_empty (&req->queue));
|
|
kfree(req);
|
|
}
|
|
|
|
|
|
/* PXA cache needs flushing with DMA I/O (it's dma-incoherent), but there's
|
|
* no device-affinity and the heap works perfectly well for i/o buffers.
|
|
* It wastes much less memory than dma_alloc_coherent() would, and even
|
|
* prevents cacheline (32 bytes wide) sharing problems.
|
|
*/
|
|
static void *
|
|
pxa2xx_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
|
|
dma_addr_t *dma, gfp_t gfp_flags)
|
|
{
|
|
char *retval;
|
|
|
|
retval = kmalloc (bytes, gfp_flags & ~(__GFP_DMA|__GFP_HIGHMEM));
|
|
if (retval)
|
|
#ifdef USE_DMA
|
|
*dma = virt_to_bus (retval);
|
|
#else
|
|
*dma = (dma_addr_t)~0;
|
|
#endif
|
|
return retval;
|
|
}
|
|
|
|
static void
|
|
pxa2xx_ep_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma,
|
|
unsigned bytes)
|
|
{
|
|
kfree (buf);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* done - retire a request; caller blocked irqs
|
|
*/
|
|
static void done(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int status)
|
|
{
|
|
unsigned stopped = ep->stopped;
|
|
|
|
list_del_init(&req->queue);
|
|
|
|
if (likely (req->req.status == -EINPROGRESS))
|
|
req->req.status = status;
|
|
else
|
|
status = req->req.status;
|
|
|
|
if (status && status != -ESHUTDOWN)
|
|
DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n",
|
|
ep->ep.name, &req->req, status,
|
|
req->req.actual, req->req.length);
|
|
|
|
/* don't modify queue heads during completion callback */
|
|
ep->stopped = 1;
|
|
req->req.complete(&ep->ep, &req->req);
|
|
ep->stopped = stopped;
|
|
}
|
|
|
|
|
|
static inline void ep0_idle (struct pxa2xx_udc *dev)
|
|
{
|
|
dev->ep0state = EP0_IDLE;
|
|
}
|
|
|
|
static int
|
|
write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max)
|
|
{
|
|
u8 *buf;
|
|
unsigned length, count;
|
|
|
|
buf = req->req.buf + req->req.actual;
|
|
prefetch(buf);
|
|
|
|
/* how big will this packet be? */
|
|
length = min(req->req.length - req->req.actual, max);
|
|
req->req.actual += length;
|
|
|
|
count = length;
|
|
while (likely(count--))
|
|
*uddr = *buf++;
|
|
|
|
return length;
|
|
}
|
|
|
|
/*
|
|
* write to an IN endpoint fifo, as many packets as possible.
|
|
* irqs will use this to write the rest later.
|
|
* caller guarantees at least one packet buffer is ready (or a zlp).
|
|
*/
|
|
static int
|
|
write_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
|
|
{
|
|
unsigned max;
|
|
|
|
max = le16_to_cpu(ep->desc->wMaxPacketSize);
|
|
do {
|
|
unsigned count;
|
|
int is_last, is_short;
|
|
|
|
count = write_packet(ep->reg_uddr, req, max);
|
|
|
|
/* last packet is usually short (or a zlp) */
|
|
if (unlikely (count != max))
|
|
is_last = is_short = 1;
|
|
else {
|
|
if (likely(req->req.length != req->req.actual)
|
|
|| req->req.zero)
|
|
is_last = 0;
|
|
else
|
|
is_last = 1;
|
|
/* interrupt/iso maxpacket may not fill the fifo */
|
|
is_short = unlikely (max < ep->fifo_size);
|
|
}
|
|
|
|
DBG(DBG_VERY_NOISY, "wrote %s %d bytes%s%s %d left %p\n",
|
|
ep->ep.name, count,
|
|
is_last ? "/L" : "", is_short ? "/S" : "",
|
|
req->req.length - req->req.actual, req);
|
|
|
|
/* let loose that packet. maybe try writing another one,
|
|
* double buffering might work. TSP, TPC, and TFS
|
|
* bit values are the same for all normal IN endpoints.
|
|
*/
|
|
*ep->reg_udccs = UDCCS_BI_TPC;
|
|
if (is_short)
|
|
*ep->reg_udccs = UDCCS_BI_TSP;
|
|
|
|
/* requests complete when all IN data is in the FIFO */
|
|
if (is_last) {
|
|
done (ep, req, 0);
|
|
if (list_empty(&ep->queue) || unlikely(ep->dma >= 0)) {
|
|
pio_irq_disable (ep->bEndpointAddress);
|
|
#ifdef USE_DMA
|
|
/* unaligned data and zlps couldn't use dma */
|
|
if (unlikely(!list_empty(&ep->queue))) {
|
|
req = list_entry(ep->queue.next,
|
|
struct pxa2xx_request, queue);
|
|
kick_dma(ep,req);
|
|
return 0;
|
|
}
|
|
#endif
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
// TODO experiment: how robust can fifo mode tweaking be?
|
|
// double buffering is off in the default fifo mode, which
|
|
// prevents TFS from being set here.
|
|
|
|
} while (*ep->reg_udccs & UDCCS_BI_TFS);
|
|
return 0;
|
|
}
|
|
|
|
/* caller asserts req->pending (ep0 irq status nyet cleared); starts
|
|
* ep0 data stage. these chips want very simple state transitions.
|
|
*/
|
|
static inline
|
|
void ep0start(struct pxa2xx_udc *dev, u32 flags, const char *tag)
|
|
{
|
|
UDCCS0 = flags|UDCCS0_SA|UDCCS0_OPR;
|
|
USIR0 = USIR0_IR0;
|
|
dev->req_pending = 0;
|
|
DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n",
|
|
__FUNCTION__, tag, UDCCS0, flags);
|
|
}
|
|
|
|
static int
|
|
write_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
|
|
{
|
|
unsigned count;
|
|
int is_short;
|
|
|
|
count = write_packet(&UDDR0, req, EP0_FIFO_SIZE);
|
|
ep->dev->stats.write.bytes += count;
|
|
|
|
/* last packet "must be" short (or a zlp) */
|
|
is_short = (count != EP0_FIFO_SIZE);
|
|
|
|
DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count,
|
|
req->req.length - req->req.actual, req);
|
|
|
|
if (unlikely (is_short)) {
|
|
if (ep->dev->req_pending)
|
|
ep0start(ep->dev, UDCCS0_IPR, "short IN");
|
|
else
|
|
UDCCS0 = UDCCS0_IPR;
|
|
|
|
count = req->req.length;
|
|
done (ep, req, 0);
|
|
ep0_idle(ep->dev);
|
|
#if 1
|
|
/* This seems to get rid of lost status irqs in some cases:
|
|
* host responds quickly, or next request involves config
|
|
* change automagic, or should have been hidden, or ...
|
|
*
|
|
* FIXME get rid of all udelays possible...
|
|
*/
|
|
if (count >= EP0_FIFO_SIZE) {
|
|
count = 100;
|
|
do {
|
|
if ((UDCCS0 & UDCCS0_OPR) != 0) {
|
|
/* clear OPR, generate ack */
|
|
UDCCS0 = UDCCS0_OPR;
|
|
break;
|
|
}
|
|
count--;
|
|
udelay(1);
|
|
} while (count);
|
|
}
|
|
#endif
|
|
} else if (ep->dev->req_pending)
|
|
ep0start(ep->dev, 0, "IN");
|
|
return is_short;
|
|
}
|
|
|
|
|
|
/*
|
|
* read_fifo - unload packet(s) from the fifo we use for usb OUT
|
|
* transfers and put them into the request. caller should have made
|
|
* sure there's at least one packet ready.
|
|
*
|
|
* returns true if the request completed because of short packet or the
|
|
* request buffer having filled (and maybe overran till end-of-packet).
|
|
*/
|
|
static int
|
|
read_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
|
|
{
|
|
for (;;) {
|
|
u32 udccs;
|
|
u8 *buf;
|
|
unsigned bufferspace, count, is_short;
|
|
|
|
/* make sure there's a packet in the FIFO.
|
|
* UDCCS_{BO,IO}_RPC are all the same bit value.
|
|
* UDCCS_{BO,IO}_RNE are all the same bit value.
|
|
*/
|
|
udccs = *ep->reg_udccs;
|
|
if (unlikely ((udccs & UDCCS_BO_RPC) == 0))
|
|
break;
|
|
buf = req->req.buf + req->req.actual;
|
|
prefetchw(buf);
|
|
bufferspace = req->req.length - req->req.actual;
|
|
|
|
/* read all bytes from this packet */
|
|
if (likely (udccs & UDCCS_BO_RNE)) {
|
|
count = 1 + (0x0ff & *ep->reg_ubcr);
|
|
req->req.actual += min (count, bufferspace);
|
|
} else /* zlp */
|
|
count = 0;
|
|
is_short = (count < ep->ep.maxpacket);
|
|
DBG(DBG_VERY_NOISY, "read %s %02x, %d bytes%s req %p %d/%d\n",
|
|
ep->ep.name, udccs, count,
|
|
is_short ? "/S" : "",
|
|
req, req->req.actual, req->req.length);
|
|
while (likely (count-- != 0)) {
|
|
u8 byte = (u8) *ep->reg_uddr;
|
|
|
|
if (unlikely (bufferspace == 0)) {
|
|
/* this happens when the driver's buffer
|
|
* is smaller than what the host sent.
|
|
* discard the extra data.
|
|
*/
|
|
if (req->req.status != -EOVERFLOW)
|
|
DMSG("%s overflow %d\n",
|
|
ep->ep.name, count);
|
|
req->req.status = -EOVERFLOW;
|
|
} else {
|
|
*buf++ = byte;
|
|
bufferspace--;
|
|
}
|
|
}
|
|
*ep->reg_udccs = UDCCS_BO_RPC;
|
|
/* RPC/RSP/RNE could now reflect the other packet buffer */
|
|
|
|
/* iso is one request per packet */
|
|
if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
|
|
if (udccs & UDCCS_IO_ROF)
|
|
req->req.status = -EHOSTUNREACH;
|
|
/* more like "is_done" */
|
|
is_short = 1;
|
|
}
|
|
|
|
/* completion */
|
|
if (is_short || req->req.actual == req->req.length) {
|
|
done (ep, req, 0);
|
|
if (list_empty(&ep->queue))
|
|
pio_irq_disable (ep->bEndpointAddress);
|
|
return 1;
|
|
}
|
|
|
|
/* finished that packet. the next one may be waiting... */
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* special ep0 version of the above. no UBCR0 or double buffering; status
|
|
* handshaking is magic. most device protocols don't need control-OUT.
|
|
* CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other
|
|
* protocols do use them.
|
|
*/
|
|
static int
|
|
read_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
|
|
{
|
|
u8 *buf, byte;
|
|
unsigned bufferspace;
|
|
|
|
buf = req->req.buf + req->req.actual;
|
|
bufferspace = req->req.length - req->req.actual;
|
|
|
|
while (UDCCS0 & UDCCS0_RNE) {
|
|
byte = (u8) UDDR0;
|
|
|
|
if (unlikely (bufferspace == 0)) {
|
|
/* this happens when the driver's buffer
|
|
* is smaller than what the host sent.
|
|
* discard the extra data.
|
|
*/
|
|
if (req->req.status != -EOVERFLOW)
|
|
DMSG("%s overflow\n", ep->ep.name);
|
|
req->req.status = -EOVERFLOW;
|
|
} else {
|
|
*buf++ = byte;
|
|
req->req.actual++;
|
|
bufferspace--;
|
|
}
|
|
}
|
|
|
|
UDCCS0 = UDCCS0_OPR | UDCCS0_IPR;
|
|
|
|
/* completion */
|
|
if (req->req.actual >= req->req.length)
|
|
return 1;
|
|
|
|
/* finished that packet. the next one may be waiting... */
|
|
return 0;
|
|
}
|
|
|
|
#ifdef USE_DMA
|
|
|
|
#define MAX_IN_DMA ((DCMD_LENGTH + 1) - BULK_FIFO_SIZE)
|
|
|
|
static void
|
|
start_dma_nodesc(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int is_in)
|
|
{
|
|
u32 dcmd = req->req.length;
|
|
u32 buf = req->req.dma;
|
|
u32 fifo = io_v2p ((u32)ep->reg_uddr);
|
|
|
|
/* caller guarantees there's a packet or more remaining
|
|
* - IN may end with a short packet (TSP set separately),
|
|
* - OUT is always full length
|
|
*/
|
|
buf += req->req.actual;
|
|
dcmd -= req->req.actual;
|
|
ep->dma_fixup = 0;
|
|
|
|
/* no-descriptor mode can be simple for bulk-in, iso-in, iso-out */
|
|
DCSR(ep->dma) = DCSR_NODESC;
|
|
if (is_in) {
|
|
DSADR(ep->dma) = buf;
|
|
DTADR(ep->dma) = fifo;
|
|
if (dcmd > MAX_IN_DMA)
|
|
dcmd = MAX_IN_DMA;
|
|
else
|
|
ep->dma_fixup = (dcmd % ep->ep.maxpacket) != 0;
|
|
dcmd |= DCMD_BURST32 | DCMD_WIDTH1
|
|
| DCMD_FLOWTRG | DCMD_INCSRCADDR;
|
|
} else {
|
|
#ifdef USE_OUT_DMA
|
|
DSADR(ep->dma) = fifo;
|
|
DTADR(ep->dma) = buf;
|
|
if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC)
|
|
dcmd = ep->ep.maxpacket;
|
|
dcmd |= DCMD_BURST32 | DCMD_WIDTH1
|
|
| DCMD_FLOWSRC | DCMD_INCTRGADDR;
|
|
#endif
|
|
}
|
|
DCMD(ep->dma) = dcmd;
|
|
DCSR(ep->dma) = DCSR_RUN | DCSR_NODESC
|
|
| (unlikely(is_in)
|
|
? DCSR_STOPIRQEN /* use dma_nodesc_handler() */
|
|
: 0); /* use handle_ep() */
|
|
}
|
|
|
|
static void kick_dma(struct pxa2xx_ep *ep, struct pxa2xx_request *req)
|
|
{
|
|
int is_in = ep->bEndpointAddress & USB_DIR_IN;
|
|
|
|
if (is_in) {
|
|
/* unaligned tx buffers and zlps only work with PIO */
|
|
if ((req->req.dma & 0x0f) != 0
|
|
|| unlikely((req->req.length - req->req.actual)
|
|
== 0)) {
|
|
pio_irq_enable(ep->bEndpointAddress);
|
|
if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0)
|
|
(void) write_fifo(ep, req);
|
|
} else {
|
|
start_dma_nodesc(ep, req, USB_DIR_IN);
|
|
}
|
|
} else {
|
|
if ((req->req.length - req->req.actual) < ep->ep.maxpacket) {
|
|
DMSG("%s short dma read...\n", ep->ep.name);
|
|
/* we're always set up for pio out */
|
|
read_fifo (ep, req);
|
|
} else {
|
|
*ep->reg_udccs = UDCCS_BO_DME
|
|
| (*ep->reg_udccs & UDCCS_BO_FST);
|
|
start_dma_nodesc(ep, req, USB_DIR_OUT);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void cancel_dma(struct pxa2xx_ep *ep)
|
|
{
|
|
struct pxa2xx_request *req;
|
|
u32 tmp;
|
|
|
|
if (DCSR(ep->dma) == 0 || list_empty(&ep->queue))
|
|
return;
|
|
|
|
DCSR(ep->dma) = 0;
|
|
while ((DCSR(ep->dma) & DCSR_STOPSTATE) == 0)
|
|
cpu_relax();
|
|
|
|
req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
|
|
tmp = DCMD(ep->dma) & DCMD_LENGTH;
|
|
req->req.actual = req->req.length - (tmp & DCMD_LENGTH);
|
|
|
|
/* the last tx packet may be incomplete, so flush the fifo.
|
|
* FIXME correct req.actual if we can
|
|
*/
|
|
if (ep->bEndpointAddress & USB_DIR_IN)
|
|
*ep->reg_udccs = UDCCS_BI_FTF;
|
|
}
|
|
|
|
/* dma channel stopped ... normal tx end (IN), or on error (IN/OUT) */
|
|
static void dma_nodesc_handler(int dmach, void *_ep, struct pt_regs *r)
|
|
{
|
|
struct pxa2xx_ep *ep = _ep;
|
|
struct pxa2xx_request *req;
|
|
u32 tmp, completed;
|
|
|
|
local_irq_disable();
|
|
|
|
req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
|
|
|
|
ep->dma_irqs++;
|
|
ep->dev->stats.irqs++;
|
|
HEX_DISPLAY(ep->dev->stats.irqs);
|
|
|
|
/* ack/clear */
|
|
tmp = DCSR(ep->dma);
|
|
DCSR(ep->dma) = tmp;
|
|
if ((tmp & DCSR_STOPSTATE) == 0
|
|
|| (DDADR(ep->dma) & DDADR_STOP) != 0) {
|
|
DBG(DBG_VERBOSE, "%s, dcsr %08x ddadr %08x\n",
|
|
ep->ep.name, DCSR(ep->dma), DDADR(ep->dma));
|
|
goto done;
|
|
}
|
|
DCSR(ep->dma) = 0; /* clear DCSR_STOPSTATE */
|
|
|
|
/* update transfer status */
|
|
completed = tmp & DCSR_BUSERR;
|
|
if (ep->bEndpointAddress & USB_DIR_IN)
|
|
tmp = DSADR(ep->dma);
|
|
else
|
|
tmp = DTADR(ep->dma);
|
|
req->req.actual = tmp - req->req.dma;
|
|
|
|
/* FIXME seems we sometimes see partial transfers... */
|
|
|
|
if (unlikely(completed != 0))
|
|
req->req.status = -EIO;
|
|
else if (req->req.actual) {
|
|
/* these registers have zeroes in low bits; they miscount
|
|
* some (end-of-transfer) short packets: tx 14 as tx 12
|
|
*/
|
|
if (ep->dma_fixup)
|
|
req->req.actual = min(req->req.actual + 3,
|
|
req->req.length);
|
|
|
|
tmp = (req->req.length - req->req.actual);
|
|
completed = (tmp == 0);
|
|
if (completed && (ep->bEndpointAddress & USB_DIR_IN)) {
|
|
|
|
/* maybe validate final short packet ... */
|
|
if ((req->req.actual % ep->ep.maxpacket) != 0)
|
|
*ep->reg_udccs = UDCCS_BI_TSP/*|UDCCS_BI_TPC*/;
|
|
|
|
/* ... or zlp, using pio fallback */
|
|
else if (ep->bmAttributes == USB_ENDPOINT_XFER_BULK
|
|
&& req->req.zero) {
|
|
DMSG("%s zlp terminate ...\n", ep->ep.name);
|
|
completed = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (likely(completed)) {
|
|
done(ep, req, 0);
|
|
|
|
/* maybe re-activate after completion */
|
|
if (ep->stopped || list_empty(&ep->queue))
|
|
goto done;
|
|
req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
|
|
}
|
|
kick_dma(ep, req);
|
|
done:
|
|
local_irq_enable();
|
|
}
|
|
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int
|
|
pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
|
|
{
|
|
struct pxa2xx_request *req;
|
|
struct pxa2xx_ep *ep;
|
|
struct pxa2xx_udc *dev;
|
|
unsigned long flags;
|
|
|
|
req = container_of(_req, struct pxa2xx_request, req);
|
|
if (unlikely (!_req || !_req->complete || !_req->buf
|
|
|| !list_empty(&req->queue))) {
|
|
DMSG("%s, bad params\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ep = container_of(_ep, struct pxa2xx_ep, ep);
|
|
if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) {
|
|
DMSG("%s, bad ep\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev = ep->dev;
|
|
if (unlikely (!dev->driver
|
|
|| dev->gadget.speed == USB_SPEED_UNKNOWN)) {
|
|
DMSG("%s, bogus device state\n", __FUNCTION__);
|
|
return -ESHUTDOWN;
|
|
}
|
|
|
|
/* iso is always one packet per request, that's the only way
|
|
* we can report per-packet status. that also helps with dma.
|
|
*/
|
|
if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
|
|
&& req->req.length > le16_to_cpu
|
|
(ep->desc->wMaxPacketSize)))
|
|
return -EMSGSIZE;
|
|
|
|
#ifdef USE_DMA
|
|
// FIXME caller may already have done the dma mapping
|
|
if (ep->dma >= 0) {
|
|
_req->dma = dma_map_single(dev->dev,
|
|
_req->buf, _req->length,
|
|
((ep->bEndpointAddress & USB_DIR_IN) != 0)
|
|
? DMA_TO_DEVICE
|
|
: DMA_FROM_DEVICE);
|
|
}
|
|
#endif
|
|
|
|
DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n",
|
|
_ep->name, _req, _req->length, _req->buf);
|
|
|
|
local_irq_save(flags);
|
|
|
|
_req->status = -EINPROGRESS;
|
|
_req->actual = 0;
|
|
|
|
/* kickstart this i/o queue? */
|
|
if (list_empty(&ep->queue) && !ep->stopped) {
|
|
if (ep->desc == 0 /* ep0 */) {
|
|
unsigned length = _req->length;
|
|
|
|
switch (dev->ep0state) {
|
|
case EP0_IN_DATA_PHASE:
|
|
dev->stats.write.ops++;
|
|
if (write_ep0_fifo(ep, req))
|
|
req = NULL;
|
|
break;
|
|
|
|
case EP0_OUT_DATA_PHASE:
|
|
dev->stats.read.ops++;
|
|
/* messy ... */
|
|
if (dev->req_config) {
|
|
DBG(DBG_VERBOSE, "ep0 config ack%s\n",
|
|
dev->has_cfr ? "" : " raced");
|
|
if (dev->has_cfr)
|
|
UDCCFR = UDCCFR_AREN|UDCCFR_ACM
|
|
|UDCCFR_MB1;
|
|
done(ep, req, 0);
|
|
dev->ep0state = EP0_END_XFER;
|
|
local_irq_restore (flags);
|
|
return 0;
|
|
}
|
|
if (dev->req_pending)
|
|
ep0start(dev, UDCCS0_IPR, "OUT");
|
|
if (length == 0 || ((UDCCS0 & UDCCS0_RNE) != 0
|
|
&& read_ep0_fifo(ep, req))) {
|
|
ep0_idle(dev);
|
|
done(ep, req, 0);
|
|
req = NULL;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
DMSG("ep0 i/o, odd state %d\n", dev->ep0state);
|
|
local_irq_restore (flags);
|
|
return -EL2HLT;
|
|
}
|
|
#ifdef USE_DMA
|
|
/* either start dma or prime pio pump */
|
|
} else if (ep->dma >= 0) {
|
|
kick_dma(ep, req);
|
|
#endif
|
|
/* can the FIFO can satisfy the request immediately? */
|
|
} else if ((ep->bEndpointAddress & USB_DIR_IN) != 0) {
|
|
if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0
|
|
&& write_fifo(ep, req))
|
|
req = NULL;
|
|
} else if ((*ep->reg_udccs & UDCCS_BO_RFS) != 0
|
|
&& read_fifo(ep, req)) {
|
|
req = NULL;
|
|
}
|
|
|
|
if (likely (req && ep->desc) && ep->dma < 0)
|
|
pio_irq_enable(ep->bEndpointAddress);
|
|
}
|
|
|
|
/* pio or dma irq handler advances the queue. */
|
|
if (likely (req != 0))
|
|
list_add_tail(&req->queue, &ep->queue);
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* nuke - dequeue ALL requests
|
|
*/
|
|
static void nuke(struct pxa2xx_ep *ep, int status)
|
|
{
|
|
struct pxa2xx_request *req;
|
|
|
|
/* called with irqs blocked */
|
|
#ifdef USE_DMA
|
|
if (ep->dma >= 0 && !ep->stopped)
|
|
cancel_dma(ep);
|
|
#endif
|
|
while (!list_empty(&ep->queue)) {
|
|
req = list_entry(ep->queue.next,
|
|
struct pxa2xx_request,
|
|
queue);
|
|
done(ep, req, status);
|
|
}
|
|
if (ep->desc)
|
|
pio_irq_disable (ep->bEndpointAddress);
|
|
}
|
|
|
|
|
|
/* dequeue JUST ONE request */
|
|
static int pxa2xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
|
|
{
|
|
struct pxa2xx_ep *ep;
|
|
struct pxa2xx_request *req;
|
|
unsigned long flags;
|
|
|
|
ep = container_of(_ep, struct pxa2xx_ep, ep);
|
|
if (!_ep || ep->ep.name == ep0name)
|
|
return -EINVAL;
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* make sure it's actually queued on this endpoint */
|
|
list_for_each_entry (req, &ep->queue, queue) {
|
|
if (&req->req == _req)
|
|
break;
|
|
}
|
|
if (&req->req != _req) {
|
|
local_irq_restore(flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
#ifdef USE_DMA
|
|
if (ep->dma >= 0 && ep->queue.next == &req->queue && !ep->stopped) {
|
|
cancel_dma(ep);
|
|
done(ep, req, -ECONNRESET);
|
|
/* restart i/o */
|
|
if (!list_empty(&ep->queue)) {
|
|
req = list_entry(ep->queue.next,
|
|
struct pxa2xx_request, queue);
|
|
kick_dma(ep, req);
|
|
}
|
|
} else
|
|
#endif
|
|
done(ep, req, -ECONNRESET);
|
|
|
|
local_irq_restore(flags);
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int pxa2xx_ep_set_halt(struct usb_ep *_ep, int value)
|
|
{
|
|
struct pxa2xx_ep *ep;
|
|
unsigned long flags;
|
|
|
|
ep = container_of(_ep, struct pxa2xx_ep, ep);
|
|
if (unlikely (!_ep
|
|
|| (!ep->desc && ep->ep.name != ep0name))
|
|
|| ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
|
|
DMSG("%s, bad ep\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
if (value == 0) {
|
|
/* this path (reset toggle+halt) is needed to implement
|
|
* SET_INTERFACE on normal hardware. but it can't be
|
|
* done from software on the PXA UDC, and the hardware
|
|
* forgets to do it as part of SET_INTERFACE automagic.
|
|
*/
|
|
DMSG("only host can clear %s halt\n", _ep->name);
|
|
return -EROFS;
|
|
}
|
|
|
|
local_irq_save(flags);
|
|
|
|
if ((ep->bEndpointAddress & USB_DIR_IN) != 0
|
|
&& ((*ep->reg_udccs & UDCCS_BI_TFS) == 0
|
|
|| !list_empty(&ep->queue))) {
|
|
local_irq_restore(flags);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/* FST bit is the same for control, bulk in, bulk out, interrupt in */
|
|
*ep->reg_udccs = UDCCS_BI_FST|UDCCS_BI_FTF;
|
|
|
|
/* ep0 needs special care */
|
|
if (!ep->desc) {
|
|
start_watchdog(ep->dev);
|
|
ep->dev->req_pending = 0;
|
|
ep->dev->ep0state = EP0_STALL;
|
|
|
|
/* and bulk/intr endpoints like dropping stalls too */
|
|
} else {
|
|
unsigned i;
|
|
for (i = 0; i < 1000; i += 20) {
|
|
if (*ep->reg_udccs & UDCCS_BI_SST)
|
|
break;
|
|
udelay(20);
|
|
}
|
|
}
|
|
local_irq_restore(flags);
|
|
|
|
DBG(DBG_VERBOSE, "%s halt\n", _ep->name);
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_ep_fifo_status(struct usb_ep *_ep)
|
|
{
|
|
struct pxa2xx_ep *ep;
|
|
|
|
ep = container_of(_ep, struct pxa2xx_ep, ep);
|
|
if (!_ep) {
|
|
DMSG("%s, bad ep\n", __FUNCTION__);
|
|
return -ENODEV;
|
|
}
|
|
/* pxa can't report unclaimed bytes from IN fifos */
|
|
if ((ep->bEndpointAddress & USB_DIR_IN) != 0)
|
|
return -EOPNOTSUPP;
|
|
if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN
|
|
|| (*ep->reg_udccs & UDCCS_BO_RFS) == 0)
|
|
return 0;
|
|
else
|
|
return (*ep->reg_ubcr & 0xfff) + 1;
|
|
}
|
|
|
|
static void pxa2xx_ep_fifo_flush(struct usb_ep *_ep)
|
|
{
|
|
struct pxa2xx_ep *ep;
|
|
|
|
ep = container_of(_ep, struct pxa2xx_ep, ep);
|
|
if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) {
|
|
DMSG("%s, bad ep\n", __FUNCTION__);
|
|
return;
|
|
}
|
|
|
|
/* toggle and halt bits stay unchanged */
|
|
|
|
/* for OUT, just read and discard the FIFO contents. */
|
|
if ((ep->bEndpointAddress & USB_DIR_IN) == 0) {
|
|
while (((*ep->reg_udccs) & UDCCS_BO_RNE) != 0)
|
|
(void) *ep->reg_uddr;
|
|
return;
|
|
}
|
|
|
|
/* most IN status is the same, but ISO can't stall */
|
|
*ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR
|
|
| (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
|
|
? 0 : UDCCS_BI_SST;
|
|
}
|
|
|
|
|
|
static struct usb_ep_ops pxa2xx_ep_ops = {
|
|
.enable = pxa2xx_ep_enable,
|
|
.disable = pxa2xx_ep_disable,
|
|
|
|
.alloc_request = pxa2xx_ep_alloc_request,
|
|
.free_request = pxa2xx_ep_free_request,
|
|
|
|
.alloc_buffer = pxa2xx_ep_alloc_buffer,
|
|
.free_buffer = pxa2xx_ep_free_buffer,
|
|
|
|
.queue = pxa2xx_ep_queue,
|
|
.dequeue = pxa2xx_ep_dequeue,
|
|
|
|
.set_halt = pxa2xx_ep_set_halt,
|
|
.fifo_status = pxa2xx_ep_fifo_status,
|
|
.fifo_flush = pxa2xx_ep_fifo_flush,
|
|
};
|
|
|
|
|
|
/* ---------------------------------------------------------------------------
|
|
* device-scoped parts of the api to the usb controller hardware
|
|
* ---------------------------------------------------------------------------
|
|
*/
|
|
|
|
static int pxa2xx_udc_get_frame(struct usb_gadget *_gadget)
|
|
{
|
|
return ((UFNRH & 0x07) << 8) | (UFNRL & 0xff);
|
|
}
|
|
|
|
static int pxa2xx_udc_wakeup(struct usb_gadget *_gadget)
|
|
{
|
|
/* host may not have enabled remote wakeup */
|
|
if ((UDCCS0 & UDCCS0_DRWF) == 0)
|
|
return -EHOSTUNREACH;
|
|
udc_set_mask_UDCCR(UDCCR_RSM);
|
|
return 0;
|
|
}
|
|
|
|
static void stop_activity(struct pxa2xx_udc *, struct usb_gadget_driver *);
|
|
static void udc_enable (struct pxa2xx_udc *);
|
|
static void udc_disable(struct pxa2xx_udc *);
|
|
|
|
/* We disable the UDC -- and its 48 MHz clock -- whenever it's not
|
|
* in active use.
|
|
*/
|
|
static int pullup(struct pxa2xx_udc *udc, int is_active)
|
|
{
|
|
is_active = is_active && udc->vbus && udc->pullup;
|
|
DMSG("%s\n", is_active ? "active" : "inactive");
|
|
if (is_active)
|
|
udc_enable(udc);
|
|
else {
|
|
if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
|
|
DMSG("disconnect %s\n", udc->driver
|
|
? udc->driver->driver.name
|
|
: "(no driver)");
|
|
stop_activity(udc, udc->driver);
|
|
}
|
|
udc_disable(udc);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* VBUS reporting logically comes from a transceiver */
|
|
static int pxa2xx_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
|
|
{
|
|
struct pxa2xx_udc *udc;
|
|
|
|
udc = container_of(_gadget, struct pxa2xx_udc, gadget);
|
|
udc->vbus = is_active = (is_active != 0);
|
|
DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
|
|
pullup(udc, is_active);
|
|
return 0;
|
|
}
|
|
|
|
/* drivers may have software control over D+ pullup */
|
|
static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active)
|
|
{
|
|
struct pxa2xx_udc *udc;
|
|
|
|
udc = container_of(_gadget, struct pxa2xx_udc, gadget);
|
|
|
|
/* not all boards support pullup control */
|
|
if (!udc->mach->udc_command)
|
|
return -EOPNOTSUPP;
|
|
|
|
is_active = (is_active != 0);
|
|
udc->pullup = is_active;
|
|
pullup(udc, is_active);
|
|
return 0;
|
|
}
|
|
|
|
static const struct usb_gadget_ops pxa2xx_udc_ops = {
|
|
.get_frame = pxa2xx_udc_get_frame,
|
|
.wakeup = pxa2xx_udc_wakeup,
|
|
.vbus_session = pxa2xx_udc_vbus_session,
|
|
.pullup = pxa2xx_udc_pullup,
|
|
|
|
// .vbus_draw ... boards may consume current from VBUS, up to
|
|
// 100-500mA based on config. the 500uA suspend ceiling means
|
|
// that exclusively vbus-powered PXA designs violate USB specs.
|
|
};
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
|
|
|
|
static const char proc_node_name [] = "driver/udc";
|
|
|
|
static int
|
|
udc_proc_read(char *page, char **start, off_t off, int count,
|
|
int *eof, void *_dev)
|
|
{
|
|
char *buf = page;
|
|
struct pxa2xx_udc *dev = _dev;
|
|
char *next = buf;
|
|
unsigned size = count;
|
|
unsigned long flags;
|
|
int i, t;
|
|
u32 tmp;
|
|
|
|
if (off != 0)
|
|
return 0;
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* basic device status */
|
|
t = scnprintf(next, size, DRIVER_DESC "\n"
|
|
"%s version: %s\nGadget driver: %s\nHost %s\n\n",
|
|
driver_name, DRIVER_VERSION SIZE_STR DMASTR,
|
|
dev->driver ? dev->driver->driver.name : "(none)",
|
|
is_vbus_present() ? "full speed" : "disconnected");
|
|
size -= t;
|
|
next += t;
|
|
|
|
/* registers for device and ep0 */
|
|
t = scnprintf(next, size,
|
|
"uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
|
|
UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL);
|
|
size -= t;
|
|
next += t;
|
|
|
|
tmp = UDCCR;
|
|
t = scnprintf(next, size,
|
|
"udccr %02X =%s%s%s%s%s%s%s%s\n", tmp,
|
|
(tmp & UDCCR_REM) ? " rem" : "",
|
|
(tmp & UDCCR_RSTIR) ? " rstir" : "",
|
|
(tmp & UDCCR_SRM) ? " srm" : "",
|
|
(tmp & UDCCR_SUSIR) ? " susir" : "",
|
|
(tmp & UDCCR_RESIR) ? " resir" : "",
|
|
(tmp & UDCCR_RSM) ? " rsm" : "",
|
|
(tmp & UDCCR_UDA) ? " uda" : "",
|
|
(tmp & UDCCR_UDE) ? " ude" : "");
|
|
size -= t;
|
|
next += t;
|
|
|
|
tmp = UDCCS0;
|
|
t = scnprintf(next, size,
|
|
"udccs0 %02X =%s%s%s%s%s%s%s%s\n", tmp,
|
|
(tmp & UDCCS0_SA) ? " sa" : "",
|
|
(tmp & UDCCS0_RNE) ? " rne" : "",
|
|
(tmp & UDCCS0_FST) ? " fst" : "",
|
|
(tmp & UDCCS0_SST) ? " sst" : "",
|
|
(tmp & UDCCS0_DRWF) ? " dwrf" : "",
|
|
(tmp & UDCCS0_FTF) ? " ftf" : "",
|
|
(tmp & UDCCS0_IPR) ? " ipr" : "",
|
|
(tmp & UDCCS0_OPR) ? " opr" : "");
|
|
size -= t;
|
|
next += t;
|
|
|
|
if (dev->has_cfr) {
|
|
tmp = UDCCFR;
|
|
t = scnprintf(next, size,
|
|
"udccfr %02X =%s%s\n", tmp,
|
|
(tmp & UDCCFR_AREN) ? " aren" : "",
|
|
(tmp & UDCCFR_ACM) ? " acm" : "");
|
|
size -= t;
|
|
next += t;
|
|
}
|
|
|
|
if (!is_vbus_present() || !dev->driver)
|
|
goto done;
|
|
|
|
t = scnprintf(next, size, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
|
|
dev->stats.write.bytes, dev->stats.write.ops,
|
|
dev->stats.read.bytes, dev->stats.read.ops,
|
|
dev->stats.irqs);
|
|
size -= t;
|
|
next += t;
|
|
|
|
/* dump endpoint queues */
|
|
for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
|
|
struct pxa2xx_ep *ep = &dev->ep [i];
|
|
struct pxa2xx_request *req;
|
|
int t;
|
|
|
|
if (i != 0) {
|
|
const struct usb_endpoint_descriptor *d;
|
|
|
|
d = ep->desc;
|
|
if (!d)
|
|
continue;
|
|
tmp = *dev->ep [i].reg_udccs;
|
|
t = scnprintf(next, size,
|
|
"%s max %d %s udccs %02x irqs %lu/%lu\n",
|
|
ep->ep.name, le16_to_cpu (d->wMaxPacketSize),
|
|
(ep->dma >= 0) ? "dma" : "pio", tmp,
|
|
ep->pio_irqs, ep->dma_irqs);
|
|
/* TODO translate all five groups of udccs bits! */
|
|
|
|
} else /* ep0 should only have one transfer queued */
|
|
t = scnprintf(next, size, "ep0 max 16 pio irqs %lu\n",
|
|
ep->pio_irqs);
|
|
if (t <= 0 || t > size)
|
|
goto done;
|
|
size -= t;
|
|
next += t;
|
|
|
|
if (list_empty(&ep->queue)) {
|
|
t = scnprintf(next, size, "\t(nothing queued)\n");
|
|
if (t <= 0 || t > size)
|
|
goto done;
|
|
size -= t;
|
|
next += t;
|
|
continue;
|
|
}
|
|
list_for_each_entry(req, &ep->queue, queue) {
|
|
#ifdef USE_DMA
|
|
if (ep->dma >= 0 && req->queue.prev == &ep->queue)
|
|
t = scnprintf(next, size,
|
|
"\treq %p len %d/%d "
|
|
"buf %p (dma%d dcmd %08x)\n",
|
|
&req->req, req->req.actual,
|
|
req->req.length, req->req.buf,
|
|
ep->dma, DCMD(ep->dma)
|
|
// low 13 bits == bytes-to-go
|
|
);
|
|
else
|
|
#endif
|
|
t = scnprintf(next, size,
|
|
"\treq %p len %d/%d buf %p\n",
|
|
&req->req, req->req.actual,
|
|
req->req.length, req->req.buf);
|
|
if (t <= 0 || t > size)
|
|
goto done;
|
|
size -= t;
|
|
next += t;
|
|
}
|
|
}
|
|
|
|
done:
|
|
local_irq_restore(flags);
|
|
*eof = 1;
|
|
return count - size;
|
|
}
|
|
|
|
#define create_proc_files() \
|
|
create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev)
|
|
#define remove_proc_files() \
|
|
remove_proc_entry(proc_node_name, NULL)
|
|
|
|
#else /* !CONFIG_USB_GADGET_DEBUG_FILES */
|
|
|
|
#define create_proc_files() do {} while (0)
|
|
#define remove_proc_files() do {} while (0)
|
|
|
|
#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
|
|
|
|
/* "function" sysfs attribute */
|
|
static ssize_t
|
|
show_function (struct device *_dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct pxa2xx_udc *dev = dev_get_drvdata (_dev);
|
|
|
|
if (!dev->driver
|
|
|| !dev->driver->function
|
|
|| strlen (dev->driver->function) > PAGE_SIZE)
|
|
return 0;
|
|
return scnprintf (buf, PAGE_SIZE, "%s\n", dev->driver->function);
|
|
}
|
|
static DEVICE_ATTR (function, S_IRUGO, show_function, NULL);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* udc_disable - disable USB device controller
|
|
*/
|
|
static void udc_disable(struct pxa2xx_udc *dev)
|
|
{
|
|
/* block all irqs */
|
|
udc_set_mask_UDCCR(UDCCR_SRM|UDCCR_REM);
|
|
UICR0 = UICR1 = 0xff;
|
|
UFNRH = UFNRH_SIM;
|
|
|
|
/* if hardware supports it, disconnect from usb */
|
|
pullup_off();
|
|
|
|
udc_clear_mask_UDCCR(UDCCR_UDE);
|
|
|
|
#ifdef CONFIG_ARCH_PXA
|
|
/* Disable clock for USB device */
|
|
pxa_set_cken(CKEN11_USB, 0);
|
|
#endif
|
|
|
|
ep0_idle (dev);
|
|
dev->gadget.speed = USB_SPEED_UNKNOWN;
|
|
LED_CONNECTED_OFF;
|
|
}
|
|
|
|
|
|
/*
|
|
* udc_reinit - initialize software state
|
|
*/
|
|
static void udc_reinit(struct pxa2xx_udc *dev)
|
|
{
|
|
u32 i;
|
|
|
|
/* device/ep0 records init */
|
|
INIT_LIST_HEAD (&dev->gadget.ep_list);
|
|
INIT_LIST_HEAD (&dev->gadget.ep0->ep_list);
|
|
dev->ep0state = EP0_IDLE;
|
|
|
|
/* basic endpoint records init */
|
|
for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
|
|
struct pxa2xx_ep *ep = &dev->ep[i];
|
|
|
|
if (i != 0)
|
|
list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
|
|
|
|
ep->desc = NULL;
|
|
ep->stopped = 0;
|
|
INIT_LIST_HEAD (&ep->queue);
|
|
ep->pio_irqs = ep->dma_irqs = 0;
|
|
}
|
|
|
|
/* the rest was statically initialized, and is read-only */
|
|
}
|
|
|
|
/* until it's enabled, this UDC should be completely invisible
|
|
* to any USB host.
|
|
*/
|
|
static void udc_enable (struct pxa2xx_udc *dev)
|
|
{
|
|
udc_clear_mask_UDCCR(UDCCR_UDE);
|
|
|
|
#ifdef CONFIG_ARCH_PXA
|
|
/* Enable clock for USB device */
|
|
pxa_set_cken(CKEN11_USB, 1);
|
|
udelay(5);
|
|
#endif
|
|
|
|
/* try to clear these bits before we enable the udc */
|
|
udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR);
|
|
|
|
ep0_idle(dev);
|
|
dev->gadget.speed = USB_SPEED_UNKNOWN;
|
|
dev->stats.irqs = 0;
|
|
|
|
/*
|
|
* sequence taken from chapter 12.5.10, PXA250 AppProcDevManual:
|
|
* - enable UDC
|
|
* - if RESET is already in progress, ack interrupt
|
|
* - unmask reset interrupt
|
|
*/
|
|
udc_set_mask_UDCCR(UDCCR_UDE);
|
|
if (!(UDCCR & UDCCR_UDA))
|
|
udc_ack_int_UDCCR(UDCCR_RSTIR);
|
|
|
|
if (dev->has_cfr /* UDC_RES2 is defined */) {
|
|
/* pxa255 (a0+) can avoid a set_config race that could
|
|
* prevent gadget drivers from configuring correctly
|
|
*/
|
|
UDCCFR = UDCCFR_ACM | UDCCFR_MB1;
|
|
} else {
|
|
/* "USB test mode" for pxa250 errata 40-42 (stepping a0, a1)
|
|
* which could result in missing packets and interrupts.
|
|
* supposedly one bit per endpoint, controlling whether it
|
|
* double buffers or not; ACM/AREN bits fit into the holes.
|
|
* zero bits (like USIR0_IRx) disable double buffering.
|
|
*/
|
|
UDC_RES1 = 0x00;
|
|
UDC_RES2 = 0x00;
|
|
}
|
|
|
|
#ifdef DISABLE_TEST_MODE
|
|
/* "test mode" seems to have become the default in later chip
|
|
* revs, preventing double buffering (and invalidating docs).
|
|
* this EXPERIMENT enables it for bulk endpoints by tweaking
|
|
* undefined/reserved register bits (that other drivers clear).
|
|
* Belcarra code comments noted this usage.
|
|
*/
|
|
if (fifo_mode & 1) { /* IN endpoints */
|
|
UDC_RES1 |= USIR0_IR1|USIR0_IR6;
|
|
UDC_RES2 |= USIR1_IR11;
|
|
}
|
|
if (fifo_mode & 2) { /* OUT endpoints */
|
|
UDC_RES1 |= USIR0_IR2|USIR0_IR7;
|
|
UDC_RES2 |= USIR1_IR12;
|
|
}
|
|
#endif
|
|
|
|
/* enable suspend/resume and reset irqs */
|
|
udc_clear_mask_UDCCR(UDCCR_SRM | UDCCR_REM);
|
|
|
|
/* enable ep0 irqs */
|
|
UICR0 &= ~UICR0_IM0;
|
|
|
|
/* if hardware supports it, pullup D+ and wait for reset */
|
|
pullup_on();
|
|
}
|
|
|
|
|
|
/* when a driver is successfully registered, it will receive
|
|
* control requests including set_configuration(), which enables
|
|
* non-control requests. then usb traffic follows until a
|
|
* disconnect is reported. then a host may connect again, or
|
|
* the driver might get unbound.
|
|
*/
|
|
int usb_gadget_register_driver(struct usb_gadget_driver *driver)
|
|
{
|
|
struct pxa2xx_udc *dev = the_controller;
|
|
int retval;
|
|
|
|
if (!driver
|
|
|| driver->speed != USB_SPEED_FULL
|
|
|| !driver->bind
|
|
|| !driver->unbind
|
|
|| !driver->disconnect
|
|
|| !driver->setup)
|
|
return -EINVAL;
|
|
if (!dev)
|
|
return -ENODEV;
|
|
if (dev->driver)
|
|
return -EBUSY;
|
|
|
|
/* first hook up the driver ... */
|
|
dev->driver = driver;
|
|
dev->gadget.dev.driver = &driver->driver;
|
|
dev->pullup = 1;
|
|
|
|
device_add (&dev->gadget.dev);
|
|
retval = driver->bind(&dev->gadget);
|
|
if (retval) {
|
|
DMSG("bind to driver %s --> error %d\n",
|
|
driver->driver.name, retval);
|
|
device_del (&dev->gadget.dev);
|
|
|
|
dev->driver = NULL;
|
|
dev->gadget.dev.driver = NULL;
|
|
return retval;
|
|
}
|
|
device_create_file(dev->dev, &dev_attr_function);
|
|
|
|
/* ... then enable host detection and ep0; and we're ready
|
|
* for set_configuration as well as eventual disconnect.
|
|
*/
|
|
DMSG("registered gadget driver '%s'\n", driver->driver.name);
|
|
pullup(dev, 1);
|
|
dump_state(dev);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(usb_gadget_register_driver);
|
|
|
|
static void
|
|
stop_activity(struct pxa2xx_udc *dev, struct usb_gadget_driver *driver)
|
|
{
|
|
int i;
|
|
|
|
/* don't disconnect drivers more than once */
|
|
if (dev->gadget.speed == USB_SPEED_UNKNOWN)
|
|
driver = NULL;
|
|
dev->gadget.speed = USB_SPEED_UNKNOWN;
|
|
|
|
/* prevent new request submissions, kill any outstanding requests */
|
|
for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
|
|
struct pxa2xx_ep *ep = &dev->ep[i];
|
|
|
|
ep->stopped = 1;
|
|
nuke(ep, -ESHUTDOWN);
|
|
}
|
|
del_timer_sync(&dev->timer);
|
|
|
|
/* report disconnect; the driver is already quiesced */
|
|
LED_CONNECTED_OFF;
|
|
if (driver)
|
|
driver->disconnect(&dev->gadget);
|
|
|
|
/* re-init driver-visible data structures */
|
|
udc_reinit(dev);
|
|
}
|
|
|
|
int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
|
|
{
|
|
struct pxa2xx_udc *dev = the_controller;
|
|
|
|
if (!dev)
|
|
return -ENODEV;
|
|
if (!driver || driver != dev->driver)
|
|
return -EINVAL;
|
|
|
|
local_irq_disable();
|
|
pullup(dev, 0);
|
|
stop_activity(dev, driver);
|
|
local_irq_enable();
|
|
|
|
driver->unbind(&dev->gadget);
|
|
dev->driver = NULL;
|
|
|
|
device_del (&dev->gadget.dev);
|
|
device_remove_file(dev->dev, &dev_attr_function);
|
|
|
|
DMSG("unregistered gadget driver '%s'\n", driver->driver.name);
|
|
dump_state(dev);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(usb_gadget_unregister_driver);
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_ARCH_LUBBOCK
|
|
|
|
/* Lubbock has separate connect and disconnect irqs. More typical designs
|
|
* use one GPIO as the VBUS IRQ, and another to control the D+ pullup.
|
|
*/
|
|
|
|
static irqreturn_t
|
|
lubbock_vbus_irq(int irq, void *_dev, struct pt_regs *r)
|
|
{
|
|
struct pxa2xx_udc *dev = _dev;
|
|
int vbus;
|
|
|
|
dev->stats.irqs++;
|
|
HEX_DISPLAY(dev->stats.irqs);
|
|
switch (irq) {
|
|
case LUBBOCK_USB_IRQ:
|
|
LED_CONNECTED_ON;
|
|
vbus = 1;
|
|
disable_irq(LUBBOCK_USB_IRQ);
|
|
enable_irq(LUBBOCK_USB_DISC_IRQ);
|
|
break;
|
|
case LUBBOCK_USB_DISC_IRQ:
|
|
LED_CONNECTED_OFF;
|
|
vbus = 0;
|
|
disable_irq(LUBBOCK_USB_DISC_IRQ);
|
|
enable_irq(LUBBOCK_USB_IRQ);
|
|
break;
|
|
default:
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
pxa2xx_udc_vbus_session(&dev->gadget, vbus);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static inline void clear_ep_state (struct pxa2xx_udc *dev)
|
|
{
|
|
unsigned i;
|
|
|
|
/* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint
|
|
* fifos, and pending transactions mustn't be continued in any case.
|
|
*/
|
|
for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++)
|
|
nuke(&dev->ep[i], -ECONNABORTED);
|
|
}
|
|
|
|
static void udc_watchdog(unsigned long _dev)
|
|
{
|
|
struct pxa2xx_udc *dev = (void *)_dev;
|
|
|
|
local_irq_disable();
|
|
if (dev->ep0state == EP0_STALL
|
|
&& (UDCCS0 & UDCCS0_FST) == 0
|
|
&& (UDCCS0 & UDCCS0_SST) == 0) {
|
|
UDCCS0 = UDCCS0_FST|UDCCS0_FTF;
|
|
DBG(DBG_VERBOSE, "ep0 re-stall\n");
|
|
start_watchdog(dev);
|
|
}
|
|
local_irq_enable();
|
|
}
|
|
|
|
static void handle_ep0 (struct pxa2xx_udc *dev)
|
|
{
|
|
u32 udccs0 = UDCCS0;
|
|
struct pxa2xx_ep *ep = &dev->ep [0];
|
|
struct pxa2xx_request *req;
|
|
union {
|
|
struct usb_ctrlrequest r;
|
|
u8 raw [8];
|
|
u32 word [2];
|
|
} u;
|
|
|
|
if (list_empty(&ep->queue))
|
|
req = NULL;
|
|
else
|
|
req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
|
|
|
|
/* clear stall status */
|
|
if (udccs0 & UDCCS0_SST) {
|
|
nuke(ep, -EPIPE);
|
|
UDCCS0 = UDCCS0_SST;
|
|
del_timer(&dev->timer);
|
|
ep0_idle(dev);
|
|
}
|
|
|
|
/* previous request unfinished? non-error iff back-to-back ... */
|
|
if ((udccs0 & UDCCS0_SA) != 0 && dev->ep0state != EP0_IDLE) {
|
|
nuke(ep, 0);
|
|
del_timer(&dev->timer);
|
|
ep0_idle(dev);
|
|
}
|
|
|
|
switch (dev->ep0state) {
|
|
case EP0_IDLE:
|
|
/* late-breaking status? */
|
|
udccs0 = UDCCS0;
|
|
|
|
/* start control request? */
|
|
if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))
|
|
== (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))) {
|
|
int i;
|
|
|
|
nuke (ep, -EPROTO);
|
|
|
|
/* read SETUP packet */
|
|
for (i = 0; i < 8; i++) {
|
|
if (unlikely(!(UDCCS0 & UDCCS0_RNE))) {
|
|
bad_setup:
|
|
DMSG("SETUP %d!\n", i);
|
|
goto stall;
|
|
}
|
|
u.raw [i] = (u8) UDDR0;
|
|
}
|
|
if (unlikely((UDCCS0 & UDCCS0_RNE) != 0))
|
|
goto bad_setup;
|
|
|
|
got_setup:
|
|
DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n",
|
|
u.r.bRequestType, u.r.bRequest,
|
|
le16_to_cpu(u.r.wValue),
|
|
le16_to_cpu(u.r.wIndex),
|
|
le16_to_cpu(u.r.wLength));
|
|
|
|
/* cope with automagic for some standard requests. */
|
|
dev->req_std = (u.r.bRequestType & USB_TYPE_MASK)
|
|
== USB_TYPE_STANDARD;
|
|
dev->req_config = 0;
|
|
dev->req_pending = 1;
|
|
switch (u.r.bRequest) {
|
|
/* hardware restricts gadget drivers here! */
|
|
case USB_REQ_SET_CONFIGURATION:
|
|
if (u.r.bRequestType == USB_RECIP_DEVICE) {
|
|
/* reflect hardware's automagic
|
|
* up to the gadget driver.
|
|
*/
|
|
config_change:
|
|
dev->req_config = 1;
|
|
clear_ep_state(dev);
|
|
/* if !has_cfr, there's no synch
|
|
* else use AREN (later) not SA|OPR
|
|
* USIR0_IR0 acts edge sensitive
|
|
*/
|
|
}
|
|
break;
|
|
/* ... and here, even more ... */
|
|
case USB_REQ_SET_INTERFACE:
|
|
if (u.r.bRequestType == USB_RECIP_INTERFACE) {
|
|
/* udc hardware is broken by design:
|
|
* - altsetting may only be zero;
|
|
* - hw resets all interfaces' eps;
|
|
* - ep reset doesn't include halt(?).
|
|
*/
|
|
DMSG("broken set_interface (%d/%d)\n",
|
|
le16_to_cpu(u.r.wIndex),
|
|
le16_to_cpu(u.r.wValue));
|
|
goto config_change;
|
|
}
|
|
break;
|
|
/* hardware was supposed to hide this */
|
|
case USB_REQ_SET_ADDRESS:
|
|
if (u.r.bRequestType == USB_RECIP_DEVICE) {
|
|
ep0start(dev, 0, "address");
|
|
return;
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (u.r.bRequestType & USB_DIR_IN)
|
|
dev->ep0state = EP0_IN_DATA_PHASE;
|
|
else
|
|
dev->ep0state = EP0_OUT_DATA_PHASE;
|
|
|
|
i = dev->driver->setup(&dev->gadget, &u.r);
|
|
if (i < 0) {
|
|
/* hardware automagic preventing STALL... */
|
|
if (dev->req_config) {
|
|
/* hardware sometimes neglects to tell
|
|
* tell us about config change events,
|
|
* so later ones may fail...
|
|
*/
|
|
WARN("config change %02x fail %d?\n",
|
|
u.r.bRequest, i);
|
|
return;
|
|
/* TODO experiment: if has_cfr,
|
|
* hardware didn't ACK; maybe we
|
|
* could actually STALL!
|
|
*/
|
|
}
|
|
DBG(DBG_VERBOSE, "protocol STALL, "
|
|
"%02x err %d\n", UDCCS0, i);
|
|
stall:
|
|
/* the watchdog timer helps deal with cases
|
|
* where udc seems to clear FST wrongly, and
|
|
* then NAKs instead of STALLing.
|
|
*/
|
|
ep0start(dev, UDCCS0_FST|UDCCS0_FTF, "stall");
|
|
start_watchdog(dev);
|
|
dev->ep0state = EP0_STALL;
|
|
|
|
/* deferred i/o == no response yet */
|
|
} else if (dev->req_pending) {
|
|
if (likely(dev->ep0state == EP0_IN_DATA_PHASE
|
|
|| dev->req_std || u.r.wLength))
|
|
ep0start(dev, 0, "defer");
|
|
else
|
|
ep0start(dev, UDCCS0_IPR, "defer/IPR");
|
|
}
|
|
|
|
/* expect at least one data or status stage irq */
|
|
return;
|
|
|
|
} else if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA))
|
|
== (UDCCS0_OPR|UDCCS0_SA))) {
|
|
unsigned i;
|
|
|
|
/* pxa210/250 erratum 131 for B0/B1 says RNE lies.
|
|
* still observed on a pxa255 a0.
|
|
*/
|
|
DBG(DBG_VERBOSE, "e131\n");
|
|
nuke(ep, -EPROTO);
|
|
|
|
/* read SETUP data, but don't trust it too much */
|
|
for (i = 0; i < 8; i++)
|
|
u.raw [i] = (u8) UDDR0;
|
|
if ((u.r.bRequestType & USB_RECIP_MASK)
|
|
> USB_RECIP_OTHER)
|
|
goto stall;
|
|
if (u.word [0] == 0 && u.word [1] == 0)
|
|
goto stall;
|
|
goto got_setup;
|
|
} else {
|
|
/* some random early IRQ:
|
|
* - we acked FST
|
|
* - IPR cleared
|
|
* - OPR got set, without SA (likely status stage)
|
|
*/
|
|
UDCCS0 = udccs0 & (UDCCS0_SA|UDCCS0_OPR);
|
|
}
|
|
break;
|
|
case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */
|
|
if (udccs0 & UDCCS0_OPR) {
|
|
UDCCS0 = UDCCS0_OPR|UDCCS0_FTF;
|
|
DBG(DBG_VERBOSE, "ep0in premature status\n");
|
|
if (req)
|
|
done(ep, req, 0);
|
|
ep0_idle(dev);
|
|
} else /* irq was IPR clearing */ {
|
|
if (req) {
|
|
/* this IN packet might finish the request */
|
|
(void) write_ep0_fifo(ep, req);
|
|
} /* else IN token before response was written */
|
|
}
|
|
break;
|
|
case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */
|
|
if (udccs0 & UDCCS0_OPR) {
|
|
if (req) {
|
|
/* this OUT packet might finish the request */
|
|
if (read_ep0_fifo(ep, req))
|
|
done(ep, req, 0);
|
|
/* else more OUT packets expected */
|
|
} /* else OUT token before read was issued */
|
|
} else /* irq was IPR clearing */ {
|
|
DBG(DBG_VERBOSE, "ep0out premature status\n");
|
|
if (req)
|
|
done(ep, req, 0);
|
|
ep0_idle(dev);
|
|
}
|
|
break;
|
|
case EP0_END_XFER:
|
|
if (req)
|
|
done(ep, req, 0);
|
|
/* ack control-IN status (maybe in-zlp was skipped)
|
|
* also appears after some config change events.
|
|
*/
|
|
if (udccs0 & UDCCS0_OPR)
|
|
UDCCS0 = UDCCS0_OPR;
|
|
ep0_idle(dev);
|
|
break;
|
|
case EP0_STALL:
|
|
UDCCS0 = UDCCS0_FST;
|
|
break;
|
|
}
|
|
USIR0 = USIR0_IR0;
|
|
}
|
|
|
|
static void handle_ep(struct pxa2xx_ep *ep)
|
|
{
|
|
struct pxa2xx_request *req;
|
|
int is_in = ep->bEndpointAddress & USB_DIR_IN;
|
|
int completed;
|
|
u32 udccs, tmp;
|
|
|
|
do {
|
|
completed = 0;
|
|
if (likely (!list_empty(&ep->queue)))
|
|
req = list_entry(ep->queue.next,
|
|
struct pxa2xx_request, queue);
|
|
else
|
|
req = NULL;
|
|
|
|
// TODO check FST handling
|
|
|
|
udccs = *ep->reg_udccs;
|
|
if (unlikely(is_in)) { /* irq from TPC, SST, or (ISO) TUR */
|
|
tmp = UDCCS_BI_TUR;
|
|
if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK))
|
|
tmp |= UDCCS_BI_SST;
|
|
tmp &= udccs;
|
|
if (likely (tmp))
|
|
*ep->reg_udccs = tmp;
|
|
if (req && likely ((udccs & UDCCS_BI_TFS) != 0))
|
|
completed = write_fifo(ep, req);
|
|
|
|
} else { /* irq from RPC (or for ISO, ROF) */
|
|
if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK))
|
|
tmp = UDCCS_BO_SST | UDCCS_BO_DME;
|
|
else
|
|
tmp = UDCCS_IO_ROF | UDCCS_IO_DME;
|
|
tmp &= udccs;
|
|
if (likely(tmp))
|
|
*ep->reg_udccs = tmp;
|
|
|
|
/* fifos can hold packets, ready for reading... */
|
|
if (likely(req)) {
|
|
#ifdef USE_OUT_DMA
|
|
// TODO didn't yet debug out-dma. this approach assumes
|
|
// the worst about short packets and RPC; it might be better.
|
|
|
|
if (likely(ep->dma >= 0)) {
|
|
if (!(udccs & UDCCS_BO_RSP)) {
|
|
*ep->reg_udccs = UDCCS_BO_RPC;
|
|
ep->dma_irqs++;
|
|
return;
|
|
}
|
|
}
|
|
#endif
|
|
completed = read_fifo(ep, req);
|
|
} else
|
|
pio_irq_disable (ep->bEndpointAddress);
|
|
}
|
|
ep->pio_irqs++;
|
|
} while (completed);
|
|
}
|
|
|
|
/*
|
|
* pxa2xx_udc_irq - interrupt handler
|
|
*
|
|
* avoid delays in ep0 processing. the control handshaking isn't always
|
|
* under software control (pxa250c0 and the pxa255 are better), and delays
|
|
* could cause usb protocol errors.
|
|
*/
|
|
static irqreturn_t
|
|
pxa2xx_udc_irq(int irq, void *_dev, struct pt_regs *r)
|
|
{
|
|
struct pxa2xx_udc *dev = _dev;
|
|
int handled;
|
|
|
|
dev->stats.irqs++;
|
|
HEX_DISPLAY(dev->stats.irqs);
|
|
do {
|
|
u32 udccr = UDCCR;
|
|
|
|
handled = 0;
|
|
|
|
/* SUSpend Interrupt Request */
|
|
if (unlikely(udccr & UDCCR_SUSIR)) {
|
|
udc_ack_int_UDCCR(UDCCR_SUSIR);
|
|
handled = 1;
|
|
DBG(DBG_VERBOSE, "USB suspend%s\n", is_vbus_present()
|
|
? "" : "+disconnect");
|
|
|
|
if (!is_vbus_present())
|
|
stop_activity(dev, dev->driver);
|
|
else if (dev->gadget.speed != USB_SPEED_UNKNOWN
|
|
&& dev->driver
|
|
&& dev->driver->suspend)
|
|
dev->driver->suspend(&dev->gadget);
|
|
ep0_idle (dev);
|
|
}
|
|
|
|
/* RESume Interrupt Request */
|
|
if (unlikely(udccr & UDCCR_RESIR)) {
|
|
udc_ack_int_UDCCR(UDCCR_RESIR);
|
|
handled = 1;
|
|
DBG(DBG_VERBOSE, "USB resume\n");
|
|
|
|
if (dev->gadget.speed != USB_SPEED_UNKNOWN
|
|
&& dev->driver
|
|
&& dev->driver->resume
|
|
&& is_vbus_present())
|
|
dev->driver->resume(&dev->gadget);
|
|
}
|
|
|
|
/* ReSeT Interrupt Request - USB reset */
|
|
if (unlikely(udccr & UDCCR_RSTIR)) {
|
|
udc_ack_int_UDCCR(UDCCR_RSTIR);
|
|
handled = 1;
|
|
|
|
if ((UDCCR & UDCCR_UDA) == 0) {
|
|
DBG(DBG_VERBOSE, "USB reset start\n");
|
|
|
|
/* reset driver and endpoints,
|
|
* in case that's not yet done
|
|
*/
|
|
stop_activity (dev, dev->driver);
|
|
|
|
} else {
|
|
DBG(DBG_VERBOSE, "USB reset end\n");
|
|
dev->gadget.speed = USB_SPEED_FULL;
|
|
LED_CONNECTED_ON;
|
|
memset(&dev->stats, 0, sizeof dev->stats);
|
|
/* driver and endpoints are still reset */
|
|
}
|
|
|
|
} else {
|
|
u32 usir0 = USIR0 & ~UICR0;
|
|
u32 usir1 = USIR1 & ~UICR1;
|
|
int i;
|
|
|
|
if (unlikely (!usir0 && !usir1))
|
|
continue;
|
|
|
|
DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", usir1, usir0);
|
|
|
|
/* control traffic */
|
|
if (usir0 & USIR0_IR0) {
|
|
dev->ep[0].pio_irqs++;
|
|
handle_ep0(dev);
|
|
handled = 1;
|
|
}
|
|
|
|
/* endpoint data transfers */
|
|
for (i = 0; i < 8; i++) {
|
|
u32 tmp = 1 << i;
|
|
|
|
if (i && (usir0 & tmp)) {
|
|
handle_ep(&dev->ep[i]);
|
|
USIR0 |= tmp;
|
|
handled = 1;
|
|
}
|
|
if (usir1 & tmp) {
|
|
handle_ep(&dev->ep[i+8]);
|
|
USIR1 |= tmp;
|
|
handled = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* we could also ask for 1 msec SOF (SIR) interrupts */
|
|
|
|
} while (handled);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static void nop_release (struct device *dev)
|
|
{
|
|
DMSG("%s %s\n", __FUNCTION__, dev->bus_id);
|
|
}
|
|
|
|
/* this uses load-time allocation and initialization (instead of
|
|
* doing it at run-time) to save code, eliminate fault paths, and
|
|
* be more obviously correct.
|
|
*/
|
|
static struct pxa2xx_udc memory = {
|
|
.gadget = {
|
|
.ops = &pxa2xx_udc_ops,
|
|
.ep0 = &memory.ep[0].ep,
|
|
.name = driver_name,
|
|
.dev = {
|
|
.bus_id = "gadget",
|
|
.release = nop_release,
|
|
},
|
|
},
|
|
|
|
/* control endpoint */
|
|
.ep[0] = {
|
|
.ep = {
|
|
.name = ep0name,
|
|
.ops = &pxa2xx_ep_ops,
|
|
.maxpacket = EP0_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.reg_udccs = &UDCCS0,
|
|
.reg_uddr = &UDDR0,
|
|
},
|
|
|
|
/* first group of endpoints */
|
|
.ep[1] = {
|
|
.ep = {
|
|
.name = "ep1in-bulk",
|
|
.ops = &pxa2xx_ep_ops,
|
|
.maxpacket = BULK_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = BULK_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 1,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.reg_udccs = &UDCCS1,
|
|
.reg_uddr = &UDDR1,
|
|
drcmr (25)
|
|
},
|
|
.ep[2] = {
|
|
.ep = {
|
|
.name = "ep2out-bulk",
|
|
.ops = &pxa2xx_ep_ops,
|
|
.maxpacket = BULK_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = BULK_FIFO_SIZE,
|
|
.bEndpointAddress = 2,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.reg_udccs = &UDCCS2,
|
|
.reg_ubcr = &UBCR2,
|
|
.reg_uddr = &UDDR2,
|
|
drcmr (26)
|
|
},
|
|
#ifndef CONFIG_USB_PXA2XX_SMALL
|
|
.ep[3] = {
|
|
.ep = {
|
|
.name = "ep3in-iso",
|
|
.ops = &pxa2xx_ep_ops,
|
|
.maxpacket = ISO_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = ISO_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 3,
|
|
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
|
|
.reg_udccs = &UDCCS3,
|
|
.reg_uddr = &UDDR3,
|
|
drcmr (27)
|
|
},
|
|
.ep[4] = {
|
|
.ep = {
|
|
.name = "ep4out-iso",
|
|
.ops = &pxa2xx_ep_ops,
|
|
.maxpacket = ISO_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = ISO_FIFO_SIZE,
|
|
.bEndpointAddress = 4,
|
|
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
|
|
.reg_udccs = &UDCCS4,
|
|
.reg_ubcr = &UBCR4,
|
|
.reg_uddr = &UDDR4,
|
|
drcmr (28)
|
|
},
|
|
.ep[5] = {
|
|
.ep = {
|
|
.name = "ep5in-int",
|
|
.ops = &pxa2xx_ep_ops,
|
|
.maxpacket = INT_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = INT_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 5,
|
|
.bmAttributes = USB_ENDPOINT_XFER_INT,
|
|
.reg_udccs = &UDCCS5,
|
|
.reg_uddr = &UDDR5,
|
|
},
|
|
|
|
/* second group of endpoints */
|
|
.ep[6] = {
|
|
.ep = {
|
|
.name = "ep6in-bulk",
|
|
.ops = &pxa2xx_ep_ops,
|
|
.maxpacket = BULK_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = BULK_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 6,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.reg_udccs = &UDCCS6,
|
|
.reg_uddr = &UDDR6,
|
|
drcmr (30)
|
|
},
|
|
.ep[7] = {
|
|
.ep = {
|
|
.name = "ep7out-bulk",
|
|
.ops = &pxa2xx_ep_ops,
|
|
.maxpacket = BULK_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = BULK_FIFO_SIZE,
|
|
.bEndpointAddress = 7,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.reg_udccs = &UDCCS7,
|
|
.reg_ubcr = &UBCR7,
|
|
.reg_uddr = &UDDR7,
|
|
drcmr (31)
|
|
},
|
|
.ep[8] = {
|
|
.ep = {
|
|
.name = "ep8in-iso",
|
|
.ops = &pxa2xx_ep_ops,
|
|
.maxpacket = ISO_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = ISO_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 8,
|
|
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
|
|
.reg_udccs = &UDCCS8,
|
|
.reg_uddr = &UDDR8,
|
|
drcmr (32)
|
|
},
|
|
.ep[9] = {
|
|
.ep = {
|
|
.name = "ep9out-iso",
|
|
.ops = &pxa2xx_ep_ops,
|
|
.maxpacket = ISO_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = ISO_FIFO_SIZE,
|
|
.bEndpointAddress = 9,
|
|
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
|
|
.reg_udccs = &UDCCS9,
|
|
.reg_ubcr = &UBCR9,
|
|
.reg_uddr = &UDDR9,
|
|
drcmr (33)
|
|
},
|
|
.ep[10] = {
|
|
.ep = {
|
|
.name = "ep10in-int",
|
|
.ops = &pxa2xx_ep_ops,
|
|
.maxpacket = INT_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = INT_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 10,
|
|
.bmAttributes = USB_ENDPOINT_XFER_INT,
|
|
.reg_udccs = &UDCCS10,
|
|
.reg_uddr = &UDDR10,
|
|
},
|
|
|
|
/* third group of endpoints */
|
|
.ep[11] = {
|
|
.ep = {
|
|
.name = "ep11in-bulk",
|
|
.ops = &pxa2xx_ep_ops,
|
|
.maxpacket = BULK_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = BULK_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 11,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.reg_udccs = &UDCCS11,
|
|
.reg_uddr = &UDDR11,
|
|
drcmr (35)
|
|
},
|
|
.ep[12] = {
|
|
.ep = {
|
|
.name = "ep12out-bulk",
|
|
.ops = &pxa2xx_ep_ops,
|
|
.maxpacket = BULK_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = BULK_FIFO_SIZE,
|
|
.bEndpointAddress = 12,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.reg_udccs = &UDCCS12,
|
|
.reg_ubcr = &UBCR12,
|
|
.reg_uddr = &UDDR12,
|
|
drcmr (36)
|
|
},
|
|
.ep[13] = {
|
|
.ep = {
|
|
.name = "ep13in-iso",
|
|
.ops = &pxa2xx_ep_ops,
|
|
.maxpacket = ISO_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = ISO_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 13,
|
|
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
|
|
.reg_udccs = &UDCCS13,
|
|
.reg_uddr = &UDDR13,
|
|
drcmr (37)
|
|
},
|
|
.ep[14] = {
|
|
.ep = {
|
|
.name = "ep14out-iso",
|
|
.ops = &pxa2xx_ep_ops,
|
|
.maxpacket = ISO_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = ISO_FIFO_SIZE,
|
|
.bEndpointAddress = 14,
|
|
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
|
|
.reg_udccs = &UDCCS14,
|
|
.reg_ubcr = &UBCR14,
|
|
.reg_uddr = &UDDR14,
|
|
drcmr (38)
|
|
},
|
|
.ep[15] = {
|
|
.ep = {
|
|
.name = "ep15in-int",
|
|
.ops = &pxa2xx_ep_ops,
|
|
.maxpacket = INT_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = INT_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 15,
|
|
.bmAttributes = USB_ENDPOINT_XFER_INT,
|
|
.reg_udccs = &UDCCS15,
|
|
.reg_uddr = &UDDR15,
|
|
},
|
|
#endif /* !CONFIG_USB_PXA2XX_SMALL */
|
|
};
|
|
|
|
#define CP15R0_VENDOR_MASK 0xffffe000
|
|
|
|
#if defined(CONFIG_ARCH_PXA)
|
|
#define CP15R0_XSCALE_VALUE 0x69052000 /* intel/arm/xscale */
|
|
|
|
#elif defined(CONFIG_ARCH_IXP4XX)
|
|
#define CP15R0_XSCALE_VALUE 0x69054000 /* intel/arm/ixp4xx */
|
|
|
|
#endif
|
|
|
|
#define CP15R0_PROD_MASK 0x000003f0
|
|
#define PXA25x 0x00000100 /* and PXA26x */
|
|
#define PXA210 0x00000120
|
|
|
|
#define CP15R0_REV_MASK 0x0000000f
|
|
|
|
#define CP15R0_PRODREV_MASK (CP15R0_PROD_MASK | CP15R0_REV_MASK)
|
|
|
|
#define PXA255_A0 0x00000106 /* or PXA260_B1 */
|
|
#define PXA250_C0 0x00000105 /* or PXA26x_B0 */
|
|
#define PXA250_B2 0x00000104
|
|
#define PXA250_B1 0x00000103 /* or PXA260_A0 */
|
|
#define PXA250_B0 0x00000102
|
|
#define PXA250_A1 0x00000101
|
|
#define PXA250_A0 0x00000100
|
|
|
|
#define PXA210_C0 0x00000125
|
|
#define PXA210_B2 0x00000124
|
|
#define PXA210_B1 0x00000123
|
|
#define PXA210_B0 0x00000122
|
|
#define IXP425_A0 0x000001c1
|
|
|
|
/*
|
|
* probe - binds to the platform device
|
|
*/
|
|
static int __init pxa2xx_udc_probe(struct device *_dev)
|
|
{
|
|
struct pxa2xx_udc *dev = &memory;
|
|
int retval, out_dma = 1;
|
|
u32 chiprev;
|
|
|
|
/* insist on Intel/ARM/XScale */
|
|
asm("mrc%? p15, 0, %0, c0, c0" : "=r" (chiprev));
|
|
if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) {
|
|
printk(KERN_ERR "%s: not XScale!\n", driver_name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* trigger chiprev-specific logic */
|
|
switch (chiprev & CP15R0_PRODREV_MASK) {
|
|
#if defined(CONFIG_ARCH_PXA)
|
|
case PXA255_A0:
|
|
dev->has_cfr = 1;
|
|
break;
|
|
case PXA250_A0:
|
|
case PXA250_A1:
|
|
/* A0/A1 "not released"; ep 13, 15 unusable */
|
|
/* fall through */
|
|
case PXA250_B2: case PXA210_B2:
|
|
case PXA250_B1: case PXA210_B1:
|
|
case PXA250_B0: case PXA210_B0:
|
|
out_dma = 0;
|
|
/* fall through */
|
|
case PXA250_C0: case PXA210_C0:
|
|
break;
|
|
#elif defined(CONFIG_ARCH_IXP4XX)
|
|
case IXP425_A0:
|
|
out_dma = 0;
|
|
break;
|
|
#endif
|
|
default:
|
|
out_dma = 0;
|
|
printk(KERN_ERR "%s: unrecognized processor: %08x\n",
|
|
driver_name, chiprev);
|
|
/* iop3xx, ixp4xx, ... */
|
|
return -ENODEV;
|
|
}
|
|
|
|
pr_debug("%s: IRQ %d%s%s%s\n", driver_name, IRQ_USB,
|
|
dev->has_cfr ? "" : " (!cfr)",
|
|
out_dma ? "" : " (broken dma-out)",
|
|
SIZE_STR DMASTR
|
|
);
|
|
|
|
#ifdef USE_DMA
|
|
#ifndef USE_OUT_DMA
|
|
out_dma = 0;
|
|
#endif
|
|
/* pxa 250 erratum 130 prevents using OUT dma (fixed C0) */
|
|
if (!out_dma) {
|
|
DMSG("disabled OUT dma\n");
|
|
dev->ep[ 2].reg_drcmr = dev->ep[ 4].reg_drcmr = 0;
|
|
dev->ep[ 7].reg_drcmr = dev->ep[ 9].reg_drcmr = 0;
|
|
dev->ep[12].reg_drcmr = dev->ep[14].reg_drcmr = 0;
|
|
}
|
|
#endif
|
|
|
|
/* other non-static parts of init */
|
|
dev->dev = _dev;
|
|
dev->mach = _dev->platform_data;
|
|
|
|
init_timer(&dev->timer);
|
|
dev->timer.function = udc_watchdog;
|
|
dev->timer.data = (unsigned long) dev;
|
|
|
|
device_initialize(&dev->gadget.dev);
|
|
dev->gadget.dev.parent = _dev;
|
|
dev->gadget.dev.dma_mask = _dev->dma_mask;
|
|
|
|
the_controller = dev;
|
|
dev_set_drvdata(_dev, dev);
|
|
|
|
udc_disable(dev);
|
|
udc_reinit(dev);
|
|
|
|
dev->vbus = is_vbus_present();
|
|
|
|
/* irq setup after old hardware state is cleaned up */
|
|
retval = request_irq(IRQ_USB, pxa2xx_udc_irq,
|
|
SA_INTERRUPT, driver_name, dev);
|
|
if (retval != 0) {
|
|
printk(KERN_ERR "%s: can't get irq %i, err %d\n",
|
|
driver_name, IRQ_USB, retval);
|
|
return -EBUSY;
|
|
}
|
|
dev->got_irq = 1;
|
|
|
|
#ifdef CONFIG_ARCH_LUBBOCK
|
|
if (machine_is_lubbock()) {
|
|
retval = request_irq(LUBBOCK_USB_DISC_IRQ,
|
|
lubbock_vbus_irq,
|
|
SA_INTERRUPT | SA_SAMPLE_RANDOM,
|
|
driver_name, dev);
|
|
if (retval != 0) {
|
|
printk(KERN_ERR "%s: can't get irq %i, err %d\n",
|
|
driver_name, LUBBOCK_USB_DISC_IRQ, retval);
|
|
lubbock_fail0:
|
|
free_irq(IRQ_USB, dev);
|
|
return -EBUSY;
|
|
}
|
|
retval = request_irq(LUBBOCK_USB_IRQ,
|
|
lubbock_vbus_irq,
|
|
SA_INTERRUPT | SA_SAMPLE_RANDOM,
|
|
driver_name, dev);
|
|
if (retval != 0) {
|
|
printk(KERN_ERR "%s: can't get irq %i, err %d\n",
|
|
driver_name, LUBBOCK_USB_IRQ, retval);
|
|
free_irq(LUBBOCK_USB_DISC_IRQ, dev);
|
|
goto lubbock_fail0;
|
|
}
|
|
#ifdef DEBUG
|
|
/* with U-Boot (but not BLOB), hex is off by default */
|
|
HEX_DISPLAY(dev->stats.irqs);
|
|
LUB_DISC_BLNK_LED &= 0xff;
|
|
#endif
|
|
}
|
|
#endif
|
|
create_proc_files();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pxa2xx_udc_shutdown(struct device *_dev)
|
|
{
|
|
pullup_off();
|
|
}
|
|
|
|
static int __exit pxa2xx_udc_remove(struct device *_dev)
|
|
{
|
|
struct pxa2xx_udc *dev = dev_get_drvdata(_dev);
|
|
|
|
udc_disable(dev);
|
|
remove_proc_files();
|
|
usb_gadget_unregister_driver(dev->driver);
|
|
|
|
if (dev->got_irq) {
|
|
free_irq(IRQ_USB, dev);
|
|
dev->got_irq = 0;
|
|
}
|
|
if (machine_is_lubbock()) {
|
|
free_irq(LUBBOCK_USB_DISC_IRQ, dev);
|
|
free_irq(LUBBOCK_USB_IRQ, dev);
|
|
}
|
|
dev_set_drvdata(_dev, NULL);
|
|
the_controller = NULL;
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/* USB suspend (controlled by the host) and system suspend (controlled
|
|
* by the PXA) don't necessarily work well together. If USB is active,
|
|
* the 48 MHz clock is required; so the system can't enter 33 MHz idle
|
|
* mode, or any deeper PM saving state.
|
|
*
|
|
* For now, we punt and forcibly disconnect from the USB host when PXA
|
|
* enters any suspend state. While we're disconnected, we always disable
|
|
* the 48MHz USB clock ... allowing PXA sleep and/or 33 MHz idle states.
|
|
* Boards without software pullup control shouldn't use those states.
|
|
* VBUS IRQs should probably be ignored so that the PXA device just acts
|
|
* "dead" to USB hosts until system resume.
|
|
*/
|
|
static int pxa2xx_udc_suspend(struct device *dev, pm_message_t state)
|
|
{
|
|
struct pxa2xx_udc *udc = dev_get_drvdata(dev);
|
|
|
|
if (!udc->mach->udc_command)
|
|
WARN("USB host won't detect disconnect!\n");
|
|
pullup(udc, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_udc_resume(struct device *dev)
|
|
{
|
|
struct pxa2xx_udc *udc = dev_get_drvdata(dev);
|
|
|
|
pullup(udc, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define pxa2xx_udc_suspend NULL
|
|
#define pxa2xx_udc_resume NULL
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static struct device_driver udc_driver = {
|
|
.name = "pxa2xx-udc",
|
|
.owner = THIS_MODULE,
|
|
.bus = &platform_bus_type,
|
|
.probe = pxa2xx_udc_probe,
|
|
.shutdown = pxa2xx_udc_shutdown,
|
|
.remove = __exit_p(pxa2xx_udc_remove),
|
|
.suspend = pxa2xx_udc_suspend,
|
|
.resume = pxa2xx_udc_resume,
|
|
};
|
|
|
|
static int __init udc_init(void)
|
|
{
|
|
printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
|
|
return driver_register(&udc_driver);
|
|
}
|
|
module_init(udc_init);
|
|
|
|
static void __exit udc_exit(void)
|
|
{
|
|
driver_unregister(&udc_driver);
|
|
}
|
|
module_exit(udc_exit);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell");
|
|
MODULE_LICENSE("GPL");
|
|
|