forked from luck/tmp_suning_uos_patched
ec0160891e
Commit711419e504
("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") unintentionally caused a dangling pointer page fault issue on firmware nodes that were freed after IRQ domain allocation. Commite3beca48a4
fixed that dangling pointer issue by only freeing the firmware node after an IRQ domain allocation failure. That fix no longer frees the firmware node immediately, but leaves the firmware node allocated after the domain is removed. The firmware node must be kept around through irq_domain_remove, but should be freed it afterwards. Add the missing free operations after domain removal where where appropriate. Fixes:e3beca48a4
("irqdomain/treewide: Keep firmware node unconditionally allocated") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1595363169-7157-1-git-send-email-jonathan.derrick@intel.com
677 lines
16 KiB
C
677 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* SGI IOC3 multifunction device driver
|
|
*
|
|
* Copyright (C) 2018, 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de>
|
|
*
|
|
* Based on work by:
|
|
* Stanislaw Skowronek <skylark@unaligned.org>
|
|
* Joshua Kinard <kumba@gentoo.org>
|
|
* Brent Casavant <bcasavan@sgi.com> - IOC4 master driver
|
|
* Pat Gefre <pfg@sgi.com> - IOC3 serial port IRQ demuxer
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/platform_data/sgi-w1.h>
|
|
#include <linux/rtc/ds1685.h>
|
|
|
|
#include <asm/pci/bridge.h>
|
|
#include <asm/sn/ioc3.h>
|
|
|
|
#define IOC3_IRQ_SERIAL_A 6
|
|
#define IOC3_IRQ_SERIAL_B 15
|
|
#define IOC3_IRQ_KBD 22
|
|
|
|
/* Bitmask for selecting which IRQs are level triggered */
|
|
#define IOC3_LVL_MASK (BIT(IOC3_IRQ_SERIAL_A) | BIT(IOC3_IRQ_SERIAL_B))
|
|
|
|
#define M48T35_REG_SIZE 32768 /* size of m48t35 registers */
|
|
|
|
/* 1.2 us latency timer (40 cycles at 33 MHz) */
|
|
#define IOC3_LATENCY 40
|
|
|
|
struct ioc3_priv_data {
|
|
struct irq_domain *domain;
|
|
struct ioc3 __iomem *regs;
|
|
struct pci_dev *pdev;
|
|
int domain_irq;
|
|
};
|
|
|
|
static void ioc3_irq_ack(struct irq_data *d)
|
|
{
|
|
struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d);
|
|
unsigned int hwirq = irqd_to_hwirq(d);
|
|
|
|
writel(BIT(hwirq), &ipd->regs->sio_ir);
|
|
}
|
|
|
|
static void ioc3_irq_mask(struct irq_data *d)
|
|
{
|
|
struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d);
|
|
unsigned int hwirq = irqd_to_hwirq(d);
|
|
|
|
writel(BIT(hwirq), &ipd->regs->sio_iec);
|
|
}
|
|
|
|
static void ioc3_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d);
|
|
unsigned int hwirq = irqd_to_hwirq(d);
|
|
|
|
writel(BIT(hwirq), &ipd->regs->sio_ies);
|
|
}
|
|
|
|
static struct irq_chip ioc3_irq_chip = {
|
|
.name = "IOC3",
|
|
.irq_ack = ioc3_irq_ack,
|
|
.irq_mask = ioc3_irq_mask,
|
|
.irq_unmask = ioc3_irq_unmask,
|
|
};
|
|
|
|
static int ioc3_irq_domain_map(struct irq_domain *d, unsigned int irq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
/* Set level IRQs for every interrupt contained in IOC3_LVL_MASK */
|
|
if (BIT(hwirq) & IOC3_LVL_MASK)
|
|
irq_set_chip_and_handler(irq, &ioc3_irq_chip, handle_level_irq);
|
|
else
|
|
irq_set_chip_and_handler(irq, &ioc3_irq_chip, handle_edge_irq);
|
|
|
|
irq_set_chip_data(irq, d->host_data);
|
|
return 0;
|
|
}
|
|
|
|
static void ioc3_irq_domain_unmap(struct irq_domain *d, unsigned int irq)
|
|
{
|
|
irq_set_chip_and_handler(irq, NULL, NULL);
|
|
irq_set_chip_data(irq, NULL);
|
|
}
|
|
|
|
static const struct irq_domain_ops ioc3_irq_domain_ops = {
|
|
.map = ioc3_irq_domain_map,
|
|
.unmap = ioc3_irq_domain_unmap,
|
|
};
|
|
|
|
static void ioc3_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct irq_domain *domain = irq_desc_get_handler_data(desc);
|
|
struct ioc3_priv_data *ipd = domain->host_data;
|
|
struct ioc3 __iomem *regs = ipd->regs;
|
|
u32 pending, mask;
|
|
unsigned int irq;
|
|
|
|
pending = readl(®s->sio_ir);
|
|
mask = readl(®s->sio_ies);
|
|
pending &= mask; /* Mask off not enabled interrupts */
|
|
|
|
if (pending) {
|
|
irq = irq_find_mapping(domain, __ffs(pending));
|
|
if (irq)
|
|
generic_handle_irq(irq);
|
|
} else {
|
|
spurious_interrupt();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* System boards/BaseIOs use more interrupt pins of the bridge ASIC
|
|
* to which the IOC3 is connected. Since the IOC3 MFD driver
|
|
* knows wiring of these extra pins, we use the map_irq function
|
|
* to get interrupts activated
|
|
*/
|
|
static int ioc3_map_irq(struct pci_dev *pdev, int slot, int pin)
|
|
{
|
|
struct pci_host_bridge *hbrg = pci_find_host_bridge(pdev->bus);
|
|
|
|
return hbrg->map_irq(pdev, slot, pin);
|
|
}
|
|
|
|
static int ioc3_irq_domain_setup(struct ioc3_priv_data *ipd, int irq)
|
|
{
|
|
struct irq_domain *domain;
|
|
struct fwnode_handle *fn;
|
|
|
|
fn = irq_domain_alloc_named_fwnode("IOC3");
|
|
if (!fn)
|
|
goto err;
|
|
|
|
domain = irq_domain_create_linear(fn, 24, &ioc3_irq_domain_ops, ipd);
|
|
if (!domain) {
|
|
irq_domain_free_fwnode(fn);
|
|
goto err;
|
|
}
|
|
|
|
ipd->domain = domain;
|
|
|
|
irq_set_chained_handler_and_data(irq, ioc3_irq_handler, domain);
|
|
ipd->domain_irq = irq;
|
|
return 0;
|
|
|
|
err:
|
|
dev_err(&ipd->pdev->dev, "irq domain setup failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static struct resource ioc3_uarta_resources[] = {
|
|
DEFINE_RES_MEM(offsetof(struct ioc3, sregs.uarta),
|
|
sizeof_field(struct ioc3, sregs.uarta)),
|
|
DEFINE_RES_IRQ(IOC3_IRQ_SERIAL_A)
|
|
};
|
|
|
|
static struct resource ioc3_uartb_resources[] = {
|
|
DEFINE_RES_MEM(offsetof(struct ioc3, sregs.uartb),
|
|
sizeof_field(struct ioc3, sregs.uartb)),
|
|
DEFINE_RES_IRQ(IOC3_IRQ_SERIAL_B)
|
|
};
|
|
|
|
static struct mfd_cell ioc3_serial_cells[] = {
|
|
{
|
|
.name = "ioc3-serial8250",
|
|
.resources = ioc3_uarta_resources,
|
|
.num_resources = ARRAY_SIZE(ioc3_uarta_resources),
|
|
},
|
|
{
|
|
.name = "ioc3-serial8250",
|
|
.resources = ioc3_uartb_resources,
|
|
.num_resources = ARRAY_SIZE(ioc3_uartb_resources),
|
|
}
|
|
};
|
|
|
|
static int ioc3_serial_setup(struct ioc3_priv_data *ipd)
|
|
{
|
|
int ret;
|
|
|
|
/* Set gpio pins for RS232/RS422 mode selection */
|
|
writel(GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL,
|
|
&ipd->regs->gpcr_s);
|
|
/* Select RS232 mode for uart a */
|
|
writel(0, &ipd->regs->gppr[6]);
|
|
/* Select RS232 mode for uart b */
|
|
writel(0, &ipd->regs->gppr[7]);
|
|
|
|
/* Switch both ports to 16650 mode */
|
|
writel(readl(&ipd->regs->port_a.sscr) & ~SSCR_DMA_EN,
|
|
&ipd->regs->port_a.sscr);
|
|
writel(readl(&ipd->regs->port_b.sscr) & ~SSCR_DMA_EN,
|
|
&ipd->regs->port_b.sscr);
|
|
udelay(1000); /* Wait until mode switch is done */
|
|
|
|
ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO,
|
|
ioc3_serial_cells, ARRAY_SIZE(ioc3_serial_cells),
|
|
&ipd->pdev->resource[0], 0, ipd->domain);
|
|
if (ret) {
|
|
dev_err(&ipd->pdev->dev, "Failed to add 16550 subdevs\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct resource ioc3_kbd_resources[] = {
|
|
DEFINE_RES_MEM(offsetof(struct ioc3, serio),
|
|
sizeof_field(struct ioc3, serio)),
|
|
DEFINE_RES_IRQ(IOC3_IRQ_KBD)
|
|
};
|
|
|
|
static struct mfd_cell ioc3_kbd_cells[] = {
|
|
{
|
|
.name = "ioc3-kbd",
|
|
.resources = ioc3_kbd_resources,
|
|
.num_resources = ARRAY_SIZE(ioc3_kbd_resources),
|
|
}
|
|
};
|
|
|
|
static int ioc3_kbd_setup(struct ioc3_priv_data *ipd)
|
|
{
|
|
int ret;
|
|
|
|
ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO,
|
|
ioc3_kbd_cells, ARRAY_SIZE(ioc3_kbd_cells),
|
|
&ipd->pdev->resource[0], 0, ipd->domain);
|
|
if (ret) {
|
|
dev_err(&ipd->pdev->dev, "Failed to add 16550 subdevs\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct resource ioc3_eth_resources[] = {
|
|
DEFINE_RES_MEM(offsetof(struct ioc3, eth),
|
|
sizeof_field(struct ioc3, eth)),
|
|
DEFINE_RES_MEM(offsetof(struct ioc3, ssram),
|
|
sizeof_field(struct ioc3, ssram)),
|
|
DEFINE_RES_IRQ(0)
|
|
};
|
|
|
|
static struct resource ioc3_w1_resources[] = {
|
|
DEFINE_RES_MEM(offsetof(struct ioc3, mcr),
|
|
sizeof_field(struct ioc3, mcr)),
|
|
};
|
|
static struct sgi_w1_platform_data ioc3_w1_platform_data;
|
|
|
|
static struct mfd_cell ioc3_eth_cells[] = {
|
|
{
|
|
.name = "ioc3-eth",
|
|
.resources = ioc3_eth_resources,
|
|
.num_resources = ARRAY_SIZE(ioc3_eth_resources),
|
|
},
|
|
{
|
|
.name = "sgi_w1",
|
|
.resources = ioc3_w1_resources,
|
|
.num_resources = ARRAY_SIZE(ioc3_w1_resources),
|
|
.platform_data = &ioc3_w1_platform_data,
|
|
.pdata_size = sizeof(ioc3_w1_platform_data),
|
|
}
|
|
};
|
|
|
|
static int ioc3_eth_setup(struct ioc3_priv_data *ipd)
|
|
{
|
|
int ret;
|
|
|
|
/* Enable One-Wire bus */
|
|
writel(GPCR_MLAN_EN, &ipd->regs->gpcr_s);
|
|
|
|
/* Generate unique identifier */
|
|
snprintf(ioc3_w1_platform_data.dev_id,
|
|
sizeof(ioc3_w1_platform_data.dev_id), "ioc3-%012llx",
|
|
ipd->pdev->resource->start);
|
|
|
|
ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO,
|
|
ioc3_eth_cells, ARRAY_SIZE(ioc3_eth_cells),
|
|
&ipd->pdev->resource[0], ipd->pdev->irq, NULL);
|
|
if (ret) {
|
|
dev_err(&ipd->pdev->dev, "Failed to add ETH/W1 subdev\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct resource ioc3_m48t35_resources[] = {
|
|
DEFINE_RES_MEM(IOC3_BYTEBUS_DEV0, M48T35_REG_SIZE)
|
|
};
|
|
|
|
static struct mfd_cell ioc3_m48t35_cells[] = {
|
|
{
|
|
.name = "rtc-m48t35",
|
|
.resources = ioc3_m48t35_resources,
|
|
.num_resources = ARRAY_SIZE(ioc3_m48t35_resources),
|
|
}
|
|
};
|
|
|
|
static int ioc3_m48t35_setup(struct ioc3_priv_data *ipd)
|
|
{
|
|
int ret;
|
|
|
|
ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO,
|
|
ioc3_m48t35_cells, ARRAY_SIZE(ioc3_m48t35_cells),
|
|
&ipd->pdev->resource[0], 0, ipd->domain);
|
|
if (ret)
|
|
dev_err(&ipd->pdev->dev, "Failed to add M48T35 subdev\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct ds1685_rtc_platform_data ip30_rtc_platform_data = {
|
|
.bcd_mode = false,
|
|
.no_irq = false,
|
|
.uie_unsupported = true,
|
|
.access_type = ds1685_reg_indirect,
|
|
};
|
|
|
|
static struct resource ioc3_rtc_ds1685_resources[] = {
|
|
DEFINE_RES_MEM(IOC3_BYTEBUS_DEV1, 1),
|
|
DEFINE_RES_MEM(IOC3_BYTEBUS_DEV2, 1),
|
|
DEFINE_RES_IRQ(0)
|
|
};
|
|
|
|
static struct mfd_cell ioc3_ds1685_cells[] = {
|
|
{
|
|
.name = "rtc-ds1685",
|
|
.resources = ioc3_rtc_ds1685_resources,
|
|
.num_resources = ARRAY_SIZE(ioc3_rtc_ds1685_resources),
|
|
.platform_data = &ip30_rtc_platform_data,
|
|
.pdata_size = sizeof(ip30_rtc_platform_data),
|
|
.id = PLATFORM_DEVID_NONE,
|
|
}
|
|
};
|
|
|
|
static int ioc3_ds1685_setup(struct ioc3_priv_data *ipd)
|
|
{
|
|
int ret, irq;
|
|
|
|
irq = ioc3_map_irq(ipd->pdev, 6, 0);
|
|
|
|
ret = mfd_add_devices(&ipd->pdev->dev, 0, ioc3_ds1685_cells,
|
|
ARRAY_SIZE(ioc3_ds1685_cells),
|
|
&ipd->pdev->resource[0], irq, NULL);
|
|
if (ret)
|
|
dev_err(&ipd->pdev->dev, "Failed to add DS1685 subdev\n");
|
|
|
|
return ret;
|
|
};
|
|
|
|
|
|
static struct resource ioc3_leds_resources[] = {
|
|
DEFINE_RES_MEM(offsetof(struct ioc3, gppr[0]),
|
|
sizeof_field(struct ioc3, gppr[0])),
|
|
DEFINE_RES_MEM(offsetof(struct ioc3, gppr[1]),
|
|
sizeof_field(struct ioc3, gppr[1])),
|
|
};
|
|
|
|
static struct mfd_cell ioc3_led_cells[] = {
|
|
{
|
|
.name = "ip30-leds",
|
|
.resources = ioc3_leds_resources,
|
|
.num_resources = ARRAY_SIZE(ioc3_leds_resources),
|
|
.id = PLATFORM_DEVID_NONE,
|
|
}
|
|
};
|
|
|
|
static int ioc3_led_setup(struct ioc3_priv_data *ipd)
|
|
{
|
|
int ret;
|
|
|
|
ret = mfd_add_devices(&ipd->pdev->dev, 0, ioc3_led_cells,
|
|
ARRAY_SIZE(ioc3_led_cells),
|
|
&ipd->pdev->resource[0], 0, ipd->domain);
|
|
if (ret)
|
|
dev_err(&ipd->pdev->dev, "Failed to add LED subdev\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ip27_baseio_setup(struct ioc3_priv_data *ipd)
|
|
{
|
|
int ret, io_irq;
|
|
|
|
io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn),
|
|
PCI_INTERRUPT_INTB);
|
|
ret = ioc3_irq_domain_setup(ipd, io_irq);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ioc3_eth_setup(ipd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ioc3_serial_setup(ipd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ioc3_m48t35_setup(ipd);
|
|
}
|
|
|
|
static int ip27_baseio6g_setup(struct ioc3_priv_data *ipd)
|
|
{
|
|
int ret, io_irq;
|
|
|
|
io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn),
|
|
PCI_INTERRUPT_INTB);
|
|
ret = ioc3_irq_domain_setup(ipd, io_irq);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ioc3_eth_setup(ipd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ioc3_serial_setup(ipd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ioc3_m48t35_setup(ipd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ioc3_kbd_setup(ipd);
|
|
}
|
|
|
|
static int ip27_mio_setup(struct ioc3_priv_data *ipd)
|
|
{
|
|
int ret;
|
|
|
|
ret = ioc3_irq_domain_setup(ipd, ipd->pdev->irq);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ioc3_serial_setup(ipd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ioc3_kbd_setup(ipd);
|
|
}
|
|
|
|
static int ip30_sysboard_setup(struct ioc3_priv_data *ipd)
|
|
{
|
|
int ret, io_irq;
|
|
|
|
io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn),
|
|
PCI_INTERRUPT_INTB);
|
|
ret = ioc3_irq_domain_setup(ipd, io_irq);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ioc3_eth_setup(ipd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ioc3_serial_setup(ipd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ioc3_kbd_setup(ipd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ioc3_ds1685_setup(ipd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ioc3_led_setup(ipd);
|
|
}
|
|
|
|
static int ioc3_menet_setup(struct ioc3_priv_data *ipd)
|
|
{
|
|
int ret, io_irq;
|
|
|
|
io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn),
|
|
PCI_INTERRUPT_INTB);
|
|
ret = ioc3_irq_domain_setup(ipd, io_irq);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ioc3_eth_setup(ipd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ioc3_serial_setup(ipd);
|
|
}
|
|
|
|
static int ioc3_menet4_setup(struct ioc3_priv_data *ipd)
|
|
{
|
|
return ioc3_eth_setup(ipd);
|
|
}
|
|
|
|
static int ioc3_cad_duo_setup(struct ioc3_priv_data *ipd)
|
|
{
|
|
int ret, io_irq;
|
|
|
|
io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn),
|
|
PCI_INTERRUPT_INTB);
|
|
ret = ioc3_irq_domain_setup(ipd, io_irq);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ioc3_eth_setup(ipd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ioc3_kbd_setup(ipd);
|
|
}
|
|
|
|
/* Helper macro for filling ioc3_info array */
|
|
#define IOC3_SID(_name, _sid, _setup) \
|
|
{ \
|
|
.name = _name, \
|
|
.sid = PCI_VENDOR_ID_SGI | (IOC3_SUBSYS_ ## _sid << 16), \
|
|
.setup = _setup, \
|
|
}
|
|
|
|
static struct {
|
|
const char *name;
|
|
u32 sid;
|
|
int (*setup)(struct ioc3_priv_data *ipd);
|
|
} ioc3_infos[] = {
|
|
IOC3_SID("IP27 BaseIO6G", IP27_BASEIO6G, &ip27_baseio6g_setup),
|
|
IOC3_SID("IP27 MIO", IP27_MIO, &ip27_mio_setup),
|
|
IOC3_SID("IP27 BaseIO", IP27_BASEIO, &ip27_baseio_setup),
|
|
IOC3_SID("IP29 System Board", IP29_SYSBOARD, &ip27_baseio6g_setup),
|
|
IOC3_SID("IP30 System Board", IP30_SYSBOARD, &ip30_sysboard_setup),
|
|
IOC3_SID("MENET", MENET, &ioc3_menet_setup),
|
|
IOC3_SID("MENET4", MENET4, &ioc3_menet4_setup)
|
|
};
|
|
#undef IOC3_SID
|
|
|
|
static int ioc3_setup(struct ioc3_priv_data *ipd)
|
|
{
|
|
u32 sid;
|
|
int i;
|
|
|
|
/* Clear IRQs */
|
|
writel(~0, &ipd->regs->sio_iec);
|
|
writel(~0, &ipd->regs->sio_ir);
|
|
writel(0, &ipd->regs->eth.eier);
|
|
writel(~0, &ipd->regs->eth.eisr);
|
|
|
|
/* Read subsystem vendor id and subsystem id */
|
|
pci_read_config_dword(ipd->pdev, PCI_SUBSYSTEM_VENDOR_ID, &sid);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ioc3_infos); i++)
|
|
if (sid == ioc3_infos[i].sid) {
|
|
pr_info("ioc3: %s\n", ioc3_infos[i].name);
|
|
return ioc3_infos[i].setup(ipd);
|
|
}
|
|
|
|
/* Treat everything not identified by PCI subid as CAD DUO */
|
|
pr_info("ioc3: CAD DUO\n");
|
|
return ioc3_cad_duo_setup(ipd);
|
|
}
|
|
|
|
static int ioc3_mfd_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *pci_id)
|
|
{
|
|
struct ioc3_priv_data *ipd;
|
|
struct ioc3 __iomem *regs;
|
|
int ret;
|
|
|
|
ret = pci_enable_device(pdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, IOC3_LATENCY);
|
|
pci_set_master(pdev);
|
|
|
|
ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
|
|
if (ret) {
|
|
pr_err("%s: No usable DMA configuration, aborting.\n",
|
|
pci_name(pdev));
|
|
goto out_disable_device;
|
|
}
|
|
|
|
/* Set up per-IOC3 data */
|
|
ipd = devm_kzalloc(&pdev->dev, sizeof(struct ioc3_priv_data),
|
|
GFP_KERNEL);
|
|
if (!ipd) {
|
|
ret = -ENOMEM;
|
|
goto out_disable_device;
|
|
}
|
|
ipd->pdev = pdev;
|
|
|
|
/*
|
|
* Map all IOC3 registers. These are shared between subdevices
|
|
* so the main IOC3 module manages them.
|
|
*/
|
|
regs = pci_ioremap_bar(pdev, 0);
|
|
if (!regs) {
|
|
dev_warn(&pdev->dev, "ioc3: Unable to remap PCI BAR for %s.\n",
|
|
pci_name(pdev));
|
|
ret = -ENOMEM;
|
|
goto out_disable_device;
|
|
}
|
|
ipd->regs = regs;
|
|
|
|
/* Track PCI-device specific data */
|
|
pci_set_drvdata(pdev, ipd);
|
|
|
|
ret = ioc3_setup(ipd);
|
|
if (ret) {
|
|
/* Remove all already added MFD devices */
|
|
mfd_remove_devices(&ipd->pdev->dev);
|
|
if (ipd->domain) {
|
|
struct fwnode_handle *fn = ipd->domain->fwnode;
|
|
|
|
irq_domain_remove(ipd->domain);
|
|
irq_domain_free_fwnode(fn);
|
|
free_irq(ipd->domain_irq, (void *)ipd);
|
|
}
|
|
pci_iounmap(pdev, regs);
|
|
goto out_disable_device;
|
|
}
|
|
|
|
return 0;
|
|
|
|
out_disable_device:
|
|
pci_disable_device(pdev);
|
|
return ret;
|
|
}
|
|
|
|
static void ioc3_mfd_remove(struct pci_dev *pdev)
|
|
{
|
|
struct ioc3_priv_data *ipd;
|
|
|
|
ipd = pci_get_drvdata(pdev);
|
|
|
|
/* Clear and disable all IRQs */
|
|
writel(~0, &ipd->regs->sio_iec);
|
|
writel(~0, &ipd->regs->sio_ir);
|
|
|
|
/* Release resources */
|
|
mfd_remove_devices(&ipd->pdev->dev);
|
|
if (ipd->domain) {
|
|
struct fwnode_handle *fn = ipd->domain->fwnode;
|
|
|
|
irq_domain_remove(ipd->domain);
|
|
irq_domain_free_fwnode(fn);
|
|
free_irq(ipd->domain_irq, (void *)ipd);
|
|
}
|
|
pci_iounmap(pdev, ipd->regs);
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
static struct pci_device_id ioc3_mfd_id_table[] = {
|
|
{ PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, PCI_ANY_ID, PCI_ANY_ID },
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, ioc3_mfd_id_table);
|
|
|
|
static struct pci_driver ioc3_mfd_driver = {
|
|
.name = "IOC3",
|
|
.id_table = ioc3_mfd_id_table,
|
|
.probe = ioc3_mfd_probe,
|
|
.remove = ioc3_mfd_remove,
|
|
};
|
|
|
|
module_pci_driver(ioc3_mfd_driver);
|
|
|
|
MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>");
|
|
MODULE_DESCRIPTION("SGI IOC3 MFD driver");
|
|
MODULE_LICENSE("GPL v2");
|