AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
a393c46b49
kernel_optimize_test/arch/arm/mach-pxa
History
Jaya Kumar a393c46b49 [ARM] 5006/1: Gumstix GPIO header fixup and defconfig fixup 
This patch adds the include of the GPIO header needed to make gumstix
build. The defconfig is updated to 2.6.25 and disables PCMCIA since
that has not yet been implemented for gumstix.

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-21 12:47:46 +01:00
..
akita-ioexp.c i2c: normal_i2c can be made const (remaining drivers) 2008-01-27 18:14:47 +01:00
clock.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
clock.h [ARM] pxa: introduce clk support for PXA SoC clocks 2007-10-12 21:14:55 +01:00
cm-x270-pci.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
cm-x270-pci.h [ARM] 4576/1: CM-X270 machine support 2007-10-15 18:53:57 +01:00
cm-x270.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
colibri.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
corgi_lcd.c [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix 2008-01-28 13:13:25 +00:00
corgi_pm.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
corgi_ssp.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
corgi.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
cpu-pxa.c [ARM] eliminate MODULE_PARM() usage 2008-02-29 22:47:17 +00:00
devices.c [ARM] pxa: V4L2 soc_camera driver for PXA270 2008-04-19 17:14:30 +01:00
devices.h [ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info() 2008-04-19 11:29:05 +01:00
dma.c [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
em-x270.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
eseries.c [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. 2008-01-28 13:13:13 +00:00
generic.c [ARM] pxa: move GPIO sysdev outside of generic.c into gpio.c 2008-04-19 11:29:04 +01:00
generic.h [ARM] pxa: move ARRAY_AND_SIZE definition to generic.h 2008-04-19 11:29:04 +01:00
gpio.c [ARM] 5003/1: Shut up sparse warnings 2008-04-19 11:29:09 +01:00
gumstix.c [ARM] 5006/1: Gumstix GPIO header fixup and defconfig fixup 2008-04-21 12:47:46 +01:00
idp.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
irq.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
Kconfig [ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards 2008-04-19 11:29:06 +01:00
leds-idp.c Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
leds-lubbock.c Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
leds-mainstone.c Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
leds-trizeps4.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
leds.c [ARM] 3666/1: TRIZEPS4 [1/5] core 2006-06-29 16:25:37 +01:00
leds.h fix file specification in comments 2006-10-03 23:01:26 +02:00
littleton.c [ARM] pxa: add keypad support for littleton 2008-04-19 11:29:06 +01:00
lpd270.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
lubbock.c [ARM] pxa: lubbock: move mis-placed SPI info 2008-04-19 11:29:08 +01:00
magician.c [ARM] 4966/1: magician: add MFP pin configuration 2008-04-19 11:29:08 +01:00
mainstone.c [ARM] 4901/3: mainstone: Register primary I2C bus 2008-04-19 11:29:06 +01:00
Makefile [ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards 2008-04-19 11:29:06 +01:00
Makefile.boot
mfp-pxa2xx.c [ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x} 2008-04-19 11:29:05 +01:00
mfp-pxa3xx.c [ARM] pxa: move mfp sysdev registeration out for suspend/resume order 2008-04-19 11:29:04 +01:00
pcm027.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
pcm990-baseboard.c [ARM] pxa: Phycore pcm-990-specific code for the PXA270 Quick Capture driver 2008-04-19 17:14:30 +01:00
pm.c [ARM] pxa: skip registers saving/restoring if entering standby mode 2008-01-26 15:07:57 +00:00
poodle.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
pxa3xx.c [ARM] pxa: initialise PXA devices before platform init code 2008-04-19 11:29:09 +01:00
pxa25x.c [ARM] pxa: initialise PXA devices before platform init code 2008-04-19 11:29:09 +01:00
pxa27x.c [ARM] pxa: initialise PXA devices before platform init code 2008-04-19 11:29:09 +01:00
pxa300.c [ARM] 4635/1: pxa: Change Eric Miao's email address to eric.miao@marvell.com 2007-10-31 15:21:48 +00:00
pxa320.c [ARM] 4675/1: pxa: fix mfp address definition error for pxa320 2007-11-29 20:52:54 +00:00
sharpsl_pm.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
sharpsl.h [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix 2008-01-28 13:13:25 +00:00
sleep.S [ARM] pxa: add preliminary suspend/resume code for pxa3xx 2008-02-04 13:17:33 +00:00
smemc.c [ARM] pxa: introduce sysdev for pxa3xx static memory controller 2008-02-04 13:17:33 +00:00
spitz_pm.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
spitz.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
ssp.c Merge branch 'pxa-plat' into devel 2008-01-28 13:21:38 +00:00
standby.S [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme 2008-01-26 15:07:56 +00:00
time.c [ARM] pxa: fix PXA27x resume 2008-01-26 15:07:57 +00:00
tosa.c [ARM] 5002/1: tosa: add two more leds 2008-04-19 11:29:09 +01:00
trizeps4.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
zylonite_pxa300.c [ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line 2008-04-19 11:29:09 +01:00
zylonite_pxa320.c [ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line 2008-04-19 11:29:09 +01:00
zylonite.c [ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line 2008-04-19 11:29:09 +01:00