AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
a581c2a469
kernel_optimize_test/arch/arm/mm/proc-arm6_7.S
Hyok S. Choi d090dddaba [ARM] nommu: Initial uCLinux support for MMU-based CPUs 
In noMMU mode, various of functions which are defined in mm/proc-*.S
is not valid or needed to be avoided. i.g. switch_mm is not needed,
just returns and this makes the I & D caches are valid which shows
great improvement of performance including task switching and IPC.

Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 17:59:56 +01:00

421 lines
11 KiB
ArmAsm
Raw Blame History

/*
* linux/arch/arm/mm/proc-arm6,7.S
*
* Copyright (C) 1997-2000 Russell King
* hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* These are the low level assembler for performing cache and TLB
* functions on the ARM610 & ARM710.
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/procinfo.h>
#include <asm/ptrace.h>
ENTRY(cpu_arm6_dcache_clean_area)
ENTRY(cpu_arm7_dcache_clean_area)
mov pc, lr
/*
* Function: arm6_7_data_abort ()
*
* Params : r2 = address of aborted instruction
* : sp = pointer to registers
*
* Purpose : obtain information about current aborted instruction
*
* Returns : r0 = address of abort
* : r1 = FSR
*/
ENTRY(cpu_arm7_data_abort)
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
ldr r8, [r0] @ read arm instruction
tst r8, #1 << 20 @ L = 0 -> write?
orreq r1, r1, #1 << 11 @ yes.
and r7, r8, #15 << 24
add pc, pc, r7, lsr #22 @ Now branch to the relevant processing routine
nop
/* 0 */ b .data_unknown
/* 1 */ mov pc, lr @ swp
/* 2 */ b .data_unknown
/* 3 */ b .data_unknown
/* 4 */ b .data_arm_lateldrpostconst @ ldr rd, [rn], #m
/* 5 */ b .data_arm_lateldrpreconst @ ldr rd, [rn, #m]
/* 6 */ b .data_arm_lateldrpostreg @ ldr rd, [rn], rm
/* 7 */ b .data_arm_lateldrprereg @ ldr rd, [rn, rm]
/* 8 */ b .data_arm_ldmstm @ ldm*a rn, <rlist>
/* 9 */ b .data_arm_ldmstm @ ldm*b rn, <rlist>
/* a */ b .data_unknown
/* b */ b .data_unknown
/* c */ mov pc, lr @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m
/* d */ mov pc, lr @ ldc rd, [rn, #m]
/* e */ b .data_unknown
/* f */
.data_unknown: @ Part of jumptable
mov r0, r2
mov r1, r8
mov r2, sp
bl baddataabort
b ret_from_exception
ENTRY(cpu_arm6_data_abort)
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
ldr r8, [r2] @ read arm instruction
tst r8, #1 << 20 @ L = 0 -> write?
orreq r1, r1, #1 << 11 @ yes.
and r7, r8, #14 << 24
teq r7, #8 << 24 @ was it ldm/stm
movne pc, lr
.data_arm_ldmstm:
tst r8, #1 << 21 @ check writeback bit
moveq pc, lr @ no writeback -> no fixup
mov r7, #0x11
orr r7, r7, #0x1100
and r6, r8, r7
and r2, r8, r7, lsl #1
add r6, r6, r2, lsr #1
and r2, r8, r7, lsl #2
add r6, r6, r2, lsr #2
and r2, r8, r7, lsl #3
add r6, r6, r2, lsr #3
add r6, r6, r6, lsr #8
add r6, r6, r6, lsr #4
and r6, r6, #15 @ r6 = no. of registers to transfer.
and r5, r8, #15 << 16 @ Extract 'n' from instruction
ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
tst r8, #1 << 23 @ Check U bit
subne r7, r7, r6, lsl #2 @ Undo increment
addeq r7, r7, r6, lsl #2 @ Undo decrement
str r7, [sp, r5, lsr #14] @ Put register 'Rn'
mov pc, lr
.data_arm_apply_r6_and_rn:
and r5, r8, #15 << 16 @ Extract 'n' from instruction
ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
tst r8, #1 << 23 @ Check U bit
subne r7, r7, r6 @ Undo incrmenet
addeq r7, r7, r6 @ Undo decrement
str r7, [sp, r5, lsr #14] @ Put register 'Rn'
mov pc, lr
.data_arm_lateldrpreconst:
tst r8, #1 << 21 @ check writeback bit
moveq pc, lr @ no writeback -> no fixup
.data_arm_lateldrpostconst:
movs r2, r8, lsl #20 @ Get offset
moveq pc, lr @ zero -> no fixup
and r5, r8, #15 << 16 @ Extract 'n' from instruction
ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
tst r8, #1 << 23 @ Check U bit
subne r7, r7, r2, lsr #20 @ Undo increment
addeq r7, r7, r2, lsr #20 @ Undo decrement
str r7, [sp, r5, lsr #14] @ Put register 'Rn'
mov pc, lr
.data_arm_lateldrprereg:
tst r8, #1 << 21 @ check writeback bit
moveq pc, lr @ no writeback -> no fixup
.data_arm_lateldrpostreg:
and r7, r8, #15 @ Extract 'm' from instruction
ldr r6, [sp, r7, lsl #2] @ Get register 'Rm'
mov r5, r8, lsr #7 @ get shift count
ands r5, r5, #31
and r7, r8, #0x70 @ get shift type
orreq r7, r7, #8 @ shift count = 0
add pc, pc, r7
nop
mov r6, r6, lsl r5 @ 0: LSL #!0
b .data_arm_apply_r6_and_rn
b .data_arm_apply_r6_and_rn @ 1: LSL #0
nop
b .data_unknown @ 2: MUL?
nop
b .data_unknown @ 3: MUL?
nop
mov r6, r6, lsr r5 @ 4: LSR #!0
b .data_arm_apply_r6_and_rn
mov r6, r6, lsr #32 @ 5: LSR #32
b .data_arm_apply_r6_and_rn
b .data_unknown @ 6: MUL?
nop
b .data_unknown @ 7: MUL?
nop
mov r6, r6, asr r5 @ 8: ASR #!0
b .data_arm_apply_r6_and_rn
mov r6, r6, asr #32 @ 9: ASR #32
b .data_arm_apply_r6_and_rn
b .data_unknown @ A: MUL?
nop
b .data_unknown @ B: MUL?
nop
mov r6, r6, ror r5 @ C: ROR #!0
b .data_arm_apply_r6_and_rn
mov r6, r6, rrx @ D: RRX
b .data_arm_apply_r6_and_rn
b .data_unknown @ E: MUL?
nop
b .data_unknown @ F: MUL?
/*
* Function: arm6_7_proc_init (void)
* : arm6_7_proc_fin (void)
*
* Notes : This processor does not require these
*/
ENTRY(cpu_arm6_proc_init)
ENTRY(cpu_arm7_proc_init)
mov pc, lr
ENTRY(cpu_arm6_proc_fin)
ENTRY(cpu_arm7_proc_fin)
mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
msr cpsr_c, r0
mov r0, #0x31 @ ....S..DP...M
mcr p15, 0, r0, c1, c0, 0 @ disable caches
mov pc, lr
ENTRY(cpu_arm6_do_idle)
ENTRY(cpu_arm7_do_idle)
mov pc, lr
/*
* Function: arm6_7_switch_mm(unsigned long pgd_phys)
* Params : pgd_phys Physical address of page table
* Purpose : Perform a task switch, saving the old processes state, and restoring
* the new.
*/
ENTRY(cpu_arm6_switch_mm)
ENTRY(cpu_arm7_switch_mm)
#ifdef CONFIG_MMU
mov r1, #0
mcr p15, 0, r1, c7, c0, 0 @ flush cache
mcr p15, 0, r0, c2, c0, 0 @ update page table ptr
mcr p15, 0, r1, c5, c0, 0 @ flush TLBs
#endif
mov pc, lr
/*
* Function: arm6_7_set_pte(pte_t *ptep, pte_t pte)
* Params : r0 = Address to set
* : r1 = value to set
* Purpose : Set a PTE and flush it out of any WB cache
*/
.align 5
ENTRY(cpu_arm6_set_pte)
ENTRY(cpu_arm7_set_pte)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
bic r2, r1, #PTE_SMALL_AP_MASK
bic r2, r2, #PTE_TYPE_MASK
orr r2, r2, #PTE_TYPE_SMALL
tst r1, #L_PTE_USER @ User?
orrne r2, r2, #PTE_SMALL_AP_URO_SRW
tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young
movne r2, #0
str r2, [r0] @ hardware version
#endif /* CONFIG_MMU */
mov pc, lr
/*
* Function: _arm6_7_reset
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
ENTRY(cpu_arm6_reset)
ENTRY(cpu_arm7_reset)
mov r1, #0
mcr p15, 0, r1, c7, c0, 0 @ flush cache
#ifdef CONFIG_MMU
mcr p15, 0, r1, c5, c0, 0 @ flush TLB
#endif
mov r1, #0x30
mcr p15, 0, r1, c1, c0, 0 @ turn off MMU etc
mov pc, r0
__INIT
.type __arm6_setup, #function
__arm6_setup: mov r0, #0
mcr p15, 0, r0, c7, c0 @ flush caches on v3
#ifdef CONFIG_MMU
mcr p15, 0, r0, c5, c0 @ flush TLBs on v3
mov r0, #0x3d @ . ..RS BLDP WCAM
orr r0, r0, #0x100 @ . ..01 0011 1101
#else
mov r0, #0x3c @ . ..RS BLDP WCA.
#endif
mov pc, lr
.size __arm6_setup, . - __arm6_setup
.type __arm7_setup, #function
__arm7_setup: mov r0, #0
mcr p15, 0, r0, c7, c0 @ flush caches on v3
#ifdef CONFIG_MMU
mcr p15, 0, r0, c5, c0 @ flush TLBs on v3
mcr p15, 0, r0, c3, c0 @ load domain access register
mov r0, #0x7d @ . ..RS BLDP WCAM
orr r0, r0, #0x100 @ . ..01 0111 1101
#else
mov r0, #0x7c @ . ..RS BLDP WCA.
#endif
mov pc, lr
.size __arm7_setup, . - __arm7_setup
__INITDATA
/*
* Purpose : Function pointers used to access above functions - all calls
* come through these
*/
.type arm6_processor_functions, #object
ENTRY(arm6_processor_functions)
.word cpu_arm6_data_abort
.word cpu_arm6_proc_init
.word cpu_arm6_proc_fin
.word cpu_arm6_reset
.word cpu_arm6_do_idle
.word cpu_arm6_dcache_clean_area
.word cpu_arm6_switch_mm
.word cpu_arm6_set_pte
.size arm6_processor_functions, . - arm6_processor_functions
/*
* Purpose : Function pointers used to access above functions - all calls
* come through these
*/
.type arm7_processor_functions, #object
ENTRY(arm7_processor_functions)
.word cpu_arm7_data_abort
.word cpu_arm7_proc_init
.word cpu_arm7_proc_fin
.word cpu_arm7_reset
.word cpu_arm7_do_idle
.word cpu_arm7_dcache_clean_area
.word cpu_arm7_switch_mm
.word cpu_arm7_set_pte
.size arm7_processor_functions, . - arm7_processor_functions
.section ".rodata"
.type cpu_arch_name, #object
cpu_arch_name: .asciz "armv3"
.size cpu_arch_name, . - cpu_arch_name
.type cpu_elf_name, #object
cpu_elf_name: .asciz "v3"
.size cpu_elf_name, . - cpu_elf_name
.type cpu_arm6_name, #object
cpu_arm6_name: .asciz "ARM6"
.size cpu_arm6_name, . - cpu_arm6_name
.type cpu_arm610_name, #object
cpu_arm610_name:
.asciz "ARM610"
.size cpu_arm610_name, . - cpu_arm610_name
.type cpu_arm7_name, #object
cpu_arm7_name: .asciz "ARM7"
.size cpu_arm7_name, . - cpu_arm7_name
.type cpu_arm710_name, #object
cpu_arm710_name:
.asciz "ARM710"
.size cpu_arm710_name, . - cpu_arm710_name
.align
.section ".proc.info.init", #alloc, #execinstr
.type __arm6_proc_info, #object
__arm6_proc_info:
.long 0x41560600
.long 0xfffffff0
.long 0x00000c1e
b __arm6_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_26BIT
.long cpu_arm6_name
.long arm6_processor_functions
.long v3_tlb_fns
.long v3_user_fns
.long v3_cache_fns
.size __arm6_proc_info, . - __arm6_proc_info
.type __arm610_proc_info, #object
__arm610_proc_info:
.long 0x41560610
.long 0xfffffff0
.long 0x00000c1e
b __arm6_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_26BIT
.long cpu_arm610_name
.long arm6_processor_functions
.long v3_tlb_fns
.long v3_user_fns
.long v3_cache_fns
.size __arm610_proc_info, . - __arm610_proc_info
.type __arm7_proc_info, #object
__arm7_proc_info:
.long 0x41007000
.long 0xffffff00
.long 0x00000c1e
b __arm7_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_26BIT
.long cpu_arm7_name
.long arm7_processor_functions
.long v3_tlb_fns
.long v3_user_fns
.long v3_cache_fns
.size __arm7_proc_info, . - __arm7_proc_info
.type __arm710_proc_info, #object
__arm710_proc_info:
.long 0x41007100
.long 0xfff8ff00
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __arm7_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_26BIT
.long cpu_arm710_name
.long arm7_processor_functions
.long v3_tlb_fns
.long v3_user_fns
.long v3_cache_fns
.size __arm710_proc_info, . - __arm710_proc_info
View Git Blame Copy Permalink