AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
ab5137015f
kernel_optimize_test/include/scsi/iscsi_if.h
Mike Christie 88dfd340b9 [SCSI] iscsi class: Add session initiatorname and ifacename sysfs attrs. 
This adds two new attrs used for creating initiator ports and
binding sessions to hardware.

The session level initiatorname:

Since bnx2i does a scsi_host per host device, we need to add the
iface initiator port settings on the session, so we can create
multiple initiator ports (each with different inames) per device/scsi_host.

The current iname reflects that qla4xxx can have one iname per hba, and we are
allocating a host per session for software. The iname on the host will
remain so we can export and set the hba level qla4xxx setting.

The ifacename attr:

To bind a session to a some peice of hardware in userspace we maintain
some mappings, but during boot or iscsid restart (iscsid contains the user
space part of the driver) we need to be able to figure out which of those
host mappings abstractions maps to certain sessions. This patch adds
a ifacename attr, which userspace can set to id the host side of the
endpoint across pivot_roots and iscsid restarts.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:21 -05:00

397 lines
11 KiB
C
Raw Blame History

/*
* iSCSI User/Kernel Shares (Defines, Constants, Protocol definitions, etc)
*
* Copyright (C) 2005 Dmitry Yusupov
* Copyright (C) 2005 Alex Aizman
* maintained by open-iscsi@googlegroups.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published
* by the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* See the file COPYING included with this distribution for more details.
*/
#ifndef ISCSI_IF_H
#define ISCSI_IF_H
#include <scsi/iscsi_proto.h>
#define UEVENT_BASE 10
#define KEVENT_BASE 100
#define ISCSI_ERR_BASE 1000
enum iscsi_uevent_e {
ISCSI_UEVENT_UNKNOWN = 0,
/* down events */
ISCSI_UEVENT_CREATE_SESSION = UEVENT_BASE + 1,
ISCSI_UEVENT_DESTROY_SESSION = UEVENT_BASE + 2,
ISCSI_UEVENT_CREATE_CONN = UEVENT_BASE + 3,
ISCSI_UEVENT_DESTROY_CONN = UEVENT_BASE + 4,
ISCSI_UEVENT_BIND_CONN = UEVENT_BASE + 5,
ISCSI_UEVENT_SET_PARAM = UEVENT_BASE + 6,
ISCSI_UEVENT_START_CONN = UEVENT_BASE + 7,
ISCSI_UEVENT_STOP_CONN = UEVENT_BASE + 8,
ISCSI_UEVENT_SEND_PDU = UEVENT_BASE + 9,
ISCSI_UEVENT_GET_STATS = UEVENT_BASE + 10,
ISCSI_UEVENT_GET_PARAM = UEVENT_BASE + 11,
ISCSI_UEVENT_TRANSPORT_EP_CONNECT = UEVENT_BASE + 12,
ISCSI_UEVENT_TRANSPORT_EP_POLL = UEVENT_BASE + 13,
ISCSI_UEVENT_TRANSPORT_EP_DISCONNECT = UEVENT_BASE + 14,
ISCSI_UEVENT_TGT_DSCVR = UEVENT_BASE + 15,
ISCSI_UEVENT_SET_HOST_PARAM = UEVENT_BASE + 16,
ISCSI_UEVENT_UNBIND_SESSION = UEVENT_BASE + 17,
ISCSI_UEVENT_CREATE_BOUND_SESSION = UEVENT_BASE + 18,
/* up events */
ISCSI_KEVENT_RECV_PDU = KEVENT_BASE + 1,
ISCSI_KEVENT_CONN_ERROR = KEVENT_BASE + 2,
ISCSI_KEVENT_IF_ERROR = KEVENT_BASE + 3,
ISCSI_KEVENT_DESTROY_SESSION = KEVENT_BASE + 4,
ISCSI_KEVENT_UNBIND_SESSION = KEVENT_BASE + 5,
ISCSI_KEVENT_CREATE_SESSION = KEVENT_BASE + 6,
};
enum iscsi_tgt_dscvr {
ISCSI_TGT_DSCVR_SEND_TARGETS = 1,
ISCSI_TGT_DSCVR_ISNS = 2,
ISCSI_TGT_DSCVR_SLP = 3,
};
struct iscsi_uevent {
uint32_t type; /* k/u events type */
uint32_t iferror; /* carries interface or resource errors */
uint64_t transport_handle;
union {
/* messages u -> k */
struct msg_create_session {
uint32_t initial_cmdsn;
uint16_t cmds_max;
uint16_t queue_depth;
} c_session;
struct msg_create_bound_session {
uint64_t ep_handle;
uint32_t initial_cmdsn;
uint16_t cmds_max;
uint16_t queue_depth;
} c_bound_session;
struct msg_destroy_session {
uint32_t sid;
} d_session;
struct msg_create_conn {
uint32_t sid;
uint32_t cid;
} c_conn;
struct msg_bind_conn {
uint32_t sid;
uint32_t cid;
uint64_t transport_eph;
uint32_t is_leading;
} b_conn;
struct msg_destroy_conn {
uint32_t sid;
uint32_t cid;
} d_conn;
struct msg_send_pdu {
uint32_t sid;
uint32_t cid;
uint32_t hdr_size;
uint32_t data_size;
} send_pdu;
struct msg_set_param {
uint32_t sid;
uint32_t cid;
uint32_t param; /* enum iscsi_param */
uint32_t len;
} set_param;
struct msg_start_conn {
uint32_t sid;
uint32_t cid;
} start_conn;
struct msg_stop_conn {
uint32_t sid;
uint32_t cid;
uint64_t conn_handle;
uint32_t flag;
} stop_conn;
struct msg_get_stats {
uint32_t sid;
uint32_t cid;
} get_stats;
struct msg_transport_connect {
uint32_t non_blocking;
} ep_connect;
struct msg_transport_poll {
uint64_t ep_handle;
uint32_t timeout_ms;
} ep_poll;
struct msg_transport_disconnect {
uint64_t ep_handle;
} ep_disconnect;
struct msg_tgt_dscvr {
enum iscsi_tgt_dscvr type;
uint32_t host_no;
/*
* enable = 1 to establish a new connection
* with the server. enable = 0 to disconnect
* from the server. Used primarily to switch
* from one iSNS server to another.
*/
uint32_t enable;
} tgt_dscvr;
struct msg_set_host_param {
uint32_t host_no;
uint32_t param; /* enum iscsi_host_param */
uint32_t len;
} set_host_param;
} u;
union {
/* messages k -> u */
int retcode;
struct msg_create_session_ret {
uint32_t sid;
uint32_t host_no;
} c_session_ret;
struct msg_create_conn_ret {
uint32_t sid;
uint32_t cid;
} c_conn_ret;
struct msg_unbind_session {
uint32_t sid;
uint32_t host_no;
} unbind_session;
struct msg_recv_req {
uint32_t sid;
uint32_t cid;
uint64_t recv_handle;
} recv_req;
struct msg_conn_error {
uint32_t sid;
uint32_t cid;
uint32_t error; /* enum iscsi_err */
} connerror;
struct msg_session_destroyed {
uint32_t host_no;
uint32_t sid;
} d_session;
struct msg_transport_connect_ret {
uint64_t handle;
} ep_connect_ret;
} r;
} __attribute__ ((aligned (sizeof(uint64_t))));
/*
* Common error codes
*/
enum iscsi_err {
ISCSI_OK = 0,
ISCSI_ERR_DATASN = ISCSI_ERR_BASE + 1,
ISCSI_ERR_DATA_OFFSET = ISCSI_ERR_BASE + 2,
ISCSI_ERR_MAX_CMDSN = ISCSI_ERR_BASE + 3,
ISCSI_ERR_EXP_CMDSN = ISCSI_ERR_BASE + 4,
ISCSI_ERR_BAD_OPCODE = ISCSI_ERR_BASE + 5,
ISCSI_ERR_DATALEN = ISCSI_ERR_BASE + 6,
ISCSI_ERR_AHSLEN = ISCSI_ERR_BASE + 7,
ISCSI_ERR_PROTO = ISCSI_ERR_BASE + 8,
ISCSI_ERR_LUN = ISCSI_ERR_BASE + 9,
ISCSI_ERR_BAD_ITT = ISCSI_ERR_BASE + 10,
ISCSI_ERR_CONN_FAILED = ISCSI_ERR_BASE + 11,
ISCSI_ERR_R2TSN = ISCSI_ERR_BASE + 12,
ISCSI_ERR_SESSION_FAILED = ISCSI_ERR_BASE + 13,
ISCSI_ERR_HDR_DGST = ISCSI_ERR_BASE + 14,
ISCSI_ERR_DATA_DGST = ISCSI_ERR_BASE + 15,
ISCSI_ERR_PARAM_NOT_FOUND = ISCSI_ERR_BASE + 16,
ISCSI_ERR_NO_SCSI_CMD = ISCSI_ERR_BASE + 17,
};
/*
* iSCSI Parameters (RFC3720)
*/
enum iscsi_param {
/* passed in using netlink set param */
ISCSI_PARAM_MAX_RECV_DLENGTH,
ISCSI_PARAM_MAX_XMIT_DLENGTH,
ISCSI_PARAM_HDRDGST_EN,
ISCSI_PARAM_DATADGST_EN,
ISCSI_PARAM_INITIAL_R2T_EN,
ISCSI_PARAM_MAX_R2T,
ISCSI_PARAM_IMM_DATA_EN,
ISCSI_PARAM_FIRST_BURST,
ISCSI_PARAM_MAX_BURST,
ISCSI_PARAM_PDU_INORDER_EN,
ISCSI_PARAM_DATASEQ_INORDER_EN,
ISCSI_PARAM_ERL,
ISCSI_PARAM_IFMARKER_EN,
ISCSI_PARAM_OFMARKER_EN,
ISCSI_PARAM_EXP_STATSN,
ISCSI_PARAM_TARGET_NAME,
ISCSI_PARAM_TPGT,
ISCSI_PARAM_PERSISTENT_ADDRESS,
ISCSI_PARAM_PERSISTENT_PORT,
ISCSI_PARAM_SESS_RECOVERY_TMO,
/* pased in through bind conn using transport_fd */
ISCSI_PARAM_CONN_PORT,
ISCSI_PARAM_CONN_ADDRESS,
ISCSI_PARAM_USERNAME,
ISCSI_PARAM_USERNAME_IN,
ISCSI_PARAM_PASSWORD,
ISCSI_PARAM_PASSWORD_IN,
ISCSI_PARAM_FAST_ABORT,
ISCSI_PARAM_ABORT_TMO,
ISCSI_PARAM_LU_RESET_TMO,
ISCSI_PARAM_HOST_RESET_TMO,
ISCSI_PARAM_PING_TMO,
ISCSI_PARAM_RECV_TMO,
ISCSI_PARAM_IFACE_NAME,
ISCSI_PARAM_ISID,
ISCSI_PARAM_INITIATOR_NAME,
/* must always be last */
ISCSI_PARAM_MAX,
};
#define ISCSI_MAX_RECV_DLENGTH (1ULL << ISCSI_PARAM_MAX_RECV_DLENGTH)
#define ISCSI_MAX_XMIT_DLENGTH (1ULL << ISCSI_PARAM_MAX_XMIT_DLENGTH)
#define ISCSI_HDRDGST_EN (1ULL << ISCSI_PARAM_HDRDGST_EN)
#define ISCSI_DATADGST_EN (1ULL << ISCSI_PARAM_DATADGST_EN)
#define ISCSI_INITIAL_R2T_EN (1ULL << ISCSI_PARAM_INITIAL_R2T_EN)
#define ISCSI_MAX_R2T (1ULL << ISCSI_PARAM_MAX_R2T)
#define ISCSI_IMM_DATA_EN (1ULL << ISCSI_PARAM_IMM_DATA_EN)
#define ISCSI_FIRST_BURST (1ULL << ISCSI_PARAM_FIRST_BURST)
#define ISCSI_MAX_BURST (1ULL << ISCSI_PARAM_MAX_BURST)
#define ISCSI_PDU_INORDER_EN (1ULL << ISCSI_PARAM_PDU_INORDER_EN)
#define ISCSI_DATASEQ_INORDER_EN (1ULL << ISCSI_PARAM_DATASEQ_INORDER_EN)
#define ISCSI_ERL (1ULL << ISCSI_PARAM_ERL)
#define ISCSI_IFMARKER_EN (1ULL << ISCSI_PARAM_IFMARKER_EN)
#define ISCSI_OFMARKER_EN (1ULL << ISCSI_PARAM_OFMARKER_EN)
#define ISCSI_EXP_STATSN (1ULL << ISCSI_PARAM_EXP_STATSN)
#define ISCSI_TARGET_NAME (1ULL << ISCSI_PARAM_TARGET_NAME)
#define ISCSI_TPGT (1ULL << ISCSI_PARAM_TPGT)
#define ISCSI_PERSISTENT_ADDRESS (1ULL << ISCSI_PARAM_PERSISTENT_ADDRESS)
#define ISCSI_PERSISTENT_PORT (1ULL << ISCSI_PARAM_PERSISTENT_PORT)
#define ISCSI_SESS_RECOVERY_TMO (1ULL << ISCSI_PARAM_SESS_RECOVERY_TMO)
#define ISCSI_CONN_PORT (1ULL << ISCSI_PARAM_CONN_PORT)
#define ISCSI_CONN_ADDRESS (1ULL << ISCSI_PARAM_CONN_ADDRESS)
#define ISCSI_USERNAME (1ULL << ISCSI_PARAM_USERNAME)
#define ISCSI_USERNAME_IN (1ULL << ISCSI_PARAM_USERNAME_IN)
#define ISCSI_PASSWORD (1ULL << ISCSI_PARAM_PASSWORD)
#define ISCSI_PASSWORD_IN (1ULL << ISCSI_PARAM_PASSWORD_IN)
#define ISCSI_FAST_ABORT (1ULL << ISCSI_PARAM_FAST_ABORT)
#define ISCSI_ABORT_TMO (1ULL << ISCSI_PARAM_ABORT_TMO)
#define ISCSI_LU_RESET_TMO (1ULL << ISCSI_PARAM_LU_RESET_TMO)
#define ISCSI_HOST_RESET_TMO (1ULL << ISCSI_PARAM_HOST_RESET_TMO)
#define ISCSI_PING_TMO (1ULL << ISCSI_PARAM_PING_TMO)
#define ISCSI_RECV_TMO (1ULL << ISCSI_PARAM_RECV_TMO)
#define ISCSI_IFACE_NAME (1ULL << ISCSI_PARAM_IFACE_NAME)
#define ISCSI_ISID (1ULL << ISCSI_PARAM_ISID)
#define ISCSI_INITIATOR_NAME (1ULL << ISCSI_PARAM_INITIATOR_NAME)
/* iSCSI HBA params */
enum iscsi_host_param {
ISCSI_HOST_PARAM_HWADDRESS,
ISCSI_HOST_PARAM_INITIATOR_NAME,
ISCSI_HOST_PARAM_NETDEV_NAME,
ISCSI_HOST_PARAM_IPADDRESS,
ISCSI_HOST_PARAM_MAX,
};
#define ISCSI_HOST_HWADDRESS (1ULL << ISCSI_HOST_PARAM_HWADDRESS)
#define ISCSI_HOST_INITIATOR_NAME (1ULL << ISCSI_HOST_PARAM_INITIATOR_NAME)
#define ISCSI_HOST_NETDEV_NAME (1ULL << ISCSI_HOST_PARAM_NETDEV_NAME)
#define ISCSI_HOST_IPADDRESS (1ULL << ISCSI_HOST_PARAM_IPADDRESS)
#define iscsi_ptr(_handle) ((void*)(unsigned long)_handle)
#define iscsi_handle(_ptr) ((uint64_t)(unsigned long)_ptr)
/*
* These flags presents iSCSI Data-Path capabilities.
*/
#define CAP_RECOVERY_L0 0x1
#define CAP_RECOVERY_L1 0x2
#define CAP_RECOVERY_L2 0x4
#define CAP_MULTI_R2T 0x8
#define CAP_HDRDGST 0x10
#define CAP_DATADGST 0x20
#define CAP_MULTI_CONN 0x40
#define CAP_TEXT_NEGO 0x80
#define CAP_MARKERS 0x100
#define CAP_FW_DB 0x200
#define CAP_SENDTARGETS_OFFLOAD 0x400
#define CAP_DATA_PATH_OFFLOAD 0x800
/*
* These flags describes reason of stop_conn() call
*/
#define STOP_CONN_TERM 0x1
#define STOP_CONN_SUSPEND 0x2
#define STOP_CONN_RECOVER 0x3
#define ISCSI_STATS_CUSTOM_MAX 32
#define ISCSI_STATS_CUSTOM_DESC_MAX 64
struct iscsi_stats_custom {
char desc[ISCSI_STATS_CUSTOM_DESC_MAX];
uint64_t value;
};
/*
* struct iscsi_stats - iSCSI Statistics (iSCSI MIB)
*
* Note: this structure contains counters collected on per-connection basis.
*/
struct iscsi_stats {
/* octets */
uint64_t txdata_octets;
uint64_t rxdata_octets;
/* xmit pdus */
uint32_t noptx_pdus;
uint32_t scsicmd_pdus;
uint32_t tmfcmd_pdus;
uint32_t login_pdus;
uint32_t text_pdus;
uint32_t dataout_pdus;
uint32_t logout_pdus;
uint32_t snack_pdus;
/* recv pdus */
uint32_t noprx_pdus;
uint32_t scsirsp_pdus;
uint32_t tmfrsp_pdus;
uint32_t textrsp_pdus;
uint32_t datain_pdus;
uint32_t logoutrsp_pdus;
uint32_t r2t_pdus;
uint32_t async_pdus;
uint32_t rjt_pdus;
/* errors */
uint32_t digest_err;
uint32_t timeout_err;
/*
* iSCSI Custom Statistics support, i.e. Transport could
* extend existing MIB statistics with its own specific statistics
* up to ISCSI_STATS_CUSTOM_MAX
*/
uint32_t custom_length;
struct iscsi_stats_custom custom[0]
__attribute__ ((aligned (sizeof(uint64_t))));
};
#endif
View Git Blame Copy Permalink