forked from luck/tmp_suning_uos_patched
ac9eafbe93
According to Section 3.5 of the "Intel Low Power S0 Idle" document [1], Function 5 of the LPS0 _DSM is expected to be invoked when the system configuration matches the criteria for entering the target low-power state of the platform. In particular, this means that all devices should be suspended and in low-power states already when that function is invoked. This is not the case currently, however, because Function 5 of the LPS0 _DSM is invoked by it before the "noirq" phase of device suspend, which means that some devices may not have been put into low-power states yet at that point. That is a consequence of the previous design of the suspend-to-idle flow that allowed the "noirq" phase of device suspend and the "noirq" phase of device resume to be carried out for multiple times while "suspended" (if any spurious wakeup events were detected) and the point of the LPS0 _DSM Function 5 invocation was chosen so as to call it (and LPS0 _DSM Function 6 analogously) once per suspend-resume cycle (regardless of how many times the "noirq" phases of device suspend and resume were carried out while "suspended"). Now that the suspend-to-idle flow has been redesigned to carry out the "noirq" phases of device suspend and resume once in each cycle, the code can be reordered to follow the specification that it is based on more closely. For this purpose, add ->prepare_late and ->restore_early platform callbacks for suspend-to-idle, to be executed, respectively, after the "noirq" phase of suspending devices and before the "noirq" phase of resuming them and make ACPI use them for the invocation of LPS0 _DSM functions as appropriate. While at it, move the LPS0 entry requirements check to be made before invoking Functions 3 and 5 of the LPS0 _DSM (also once per cycle) as follows from the specification [1]. Link: https://uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf # [1] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
622 lines
15 KiB
C
622 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* kernel/power/suspend.c - Suspend to RAM and standby functionality.
|
|
*
|
|
* Copyright (c) 2003 Patrick Mochel
|
|
* Copyright (c) 2003 Open Source Development Lab
|
|
* Copyright (c) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "PM: " fmt
|
|
|
|
#include <linux/string.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/console.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/cpuidle.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/export.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/syscore_ops.h>
|
|
#include <linux/swait.h>
|
|
#include <linux/ftrace.h>
|
|
#include <trace/events/power.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/moduleparam.h>
|
|
|
|
#include "power.h"
|
|
|
|
const char * const pm_labels[] = {
|
|
[PM_SUSPEND_TO_IDLE] = "freeze",
|
|
[PM_SUSPEND_STANDBY] = "standby",
|
|
[PM_SUSPEND_MEM] = "mem",
|
|
};
|
|
const char *pm_states[PM_SUSPEND_MAX];
|
|
static const char * const mem_sleep_labels[] = {
|
|
[PM_SUSPEND_TO_IDLE] = "s2idle",
|
|
[PM_SUSPEND_STANDBY] = "shallow",
|
|
[PM_SUSPEND_MEM] = "deep",
|
|
};
|
|
const char *mem_sleep_states[PM_SUSPEND_MAX];
|
|
|
|
suspend_state_t mem_sleep_current = PM_SUSPEND_TO_IDLE;
|
|
suspend_state_t mem_sleep_default = PM_SUSPEND_MAX;
|
|
suspend_state_t pm_suspend_target_state;
|
|
EXPORT_SYMBOL_GPL(pm_suspend_target_state);
|
|
|
|
unsigned int pm_suspend_global_flags;
|
|
EXPORT_SYMBOL_GPL(pm_suspend_global_flags);
|
|
|
|
static const struct platform_suspend_ops *suspend_ops;
|
|
static const struct platform_s2idle_ops *s2idle_ops;
|
|
static DECLARE_SWAIT_QUEUE_HEAD(s2idle_wait_head);
|
|
|
|
enum s2idle_states __read_mostly s2idle_state;
|
|
static DEFINE_RAW_SPINLOCK(s2idle_lock);
|
|
|
|
/**
|
|
* pm_suspend_default_s2idle - Check if suspend-to-idle is the default suspend.
|
|
*
|
|
* Return 'true' if suspend-to-idle has been selected as the default system
|
|
* suspend method.
|
|
*/
|
|
bool pm_suspend_default_s2idle(void)
|
|
{
|
|
return mem_sleep_current == PM_SUSPEND_TO_IDLE;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pm_suspend_default_s2idle);
|
|
|
|
void s2idle_set_ops(const struct platform_s2idle_ops *ops)
|
|
{
|
|
lock_system_sleep();
|
|
s2idle_ops = ops;
|
|
unlock_system_sleep();
|
|
}
|
|
|
|
static void s2idle_begin(void)
|
|
{
|
|
s2idle_state = S2IDLE_STATE_NONE;
|
|
}
|
|
|
|
static void s2idle_enter(void)
|
|
{
|
|
trace_suspend_resume(TPS("machine_suspend"), PM_SUSPEND_TO_IDLE, true);
|
|
|
|
raw_spin_lock_irq(&s2idle_lock);
|
|
if (pm_wakeup_pending())
|
|
goto out;
|
|
|
|
s2idle_state = S2IDLE_STATE_ENTER;
|
|
raw_spin_unlock_irq(&s2idle_lock);
|
|
|
|
get_online_cpus();
|
|
cpuidle_resume();
|
|
|
|
/* Push all the CPUs into the idle loop. */
|
|
wake_up_all_idle_cpus();
|
|
/* Make the current CPU wait so it can enter the idle loop too. */
|
|
swait_event_exclusive(s2idle_wait_head,
|
|
s2idle_state == S2IDLE_STATE_WAKE);
|
|
|
|
cpuidle_pause();
|
|
put_online_cpus();
|
|
|
|
raw_spin_lock_irq(&s2idle_lock);
|
|
|
|
out:
|
|
s2idle_state = S2IDLE_STATE_NONE;
|
|
raw_spin_unlock_irq(&s2idle_lock);
|
|
|
|
trace_suspend_resume(TPS("machine_suspend"), PM_SUSPEND_TO_IDLE, false);
|
|
}
|
|
|
|
static void s2idle_loop(void)
|
|
{
|
|
pm_pr_dbg("suspend-to-idle\n");
|
|
|
|
/*
|
|
* Suspend-to-idle equals:
|
|
* frozen processes + suspended devices + idle processors.
|
|
* Thus s2idle_enter() should be called right after all devices have
|
|
* been suspended.
|
|
*
|
|
* Wakeups during the noirq suspend of devices may be spurious, so try
|
|
* to avoid them upfront.
|
|
*/
|
|
for (;;) {
|
|
if (s2idle_ops && s2idle_ops->wake)
|
|
s2idle_ops->wake();
|
|
|
|
if (pm_wakeup_pending())
|
|
break;
|
|
|
|
pm_wakeup_clear(false);
|
|
|
|
s2idle_enter();
|
|
}
|
|
|
|
pm_pr_dbg("resume from suspend-to-idle\n");
|
|
}
|
|
|
|
void s2idle_wake(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&s2idle_lock, flags);
|
|
if (s2idle_state > S2IDLE_STATE_NONE) {
|
|
s2idle_state = S2IDLE_STATE_WAKE;
|
|
swake_up_one(&s2idle_wait_head);
|
|
}
|
|
raw_spin_unlock_irqrestore(&s2idle_lock, flags);
|
|
}
|
|
EXPORT_SYMBOL_GPL(s2idle_wake);
|
|
|
|
static bool valid_state(suspend_state_t state)
|
|
{
|
|
/*
|
|
* PM_SUSPEND_STANDBY and PM_SUSPEND_MEM states need low level
|
|
* support and need to be valid to the low level
|
|
* implementation, no valid callback implies that none are valid.
|
|
*/
|
|
return suspend_ops && suspend_ops->valid && suspend_ops->valid(state);
|
|
}
|
|
|
|
void __init pm_states_init(void)
|
|
{
|
|
/* "mem" and "freeze" are always present in /sys/power/state. */
|
|
pm_states[PM_SUSPEND_MEM] = pm_labels[PM_SUSPEND_MEM];
|
|
pm_states[PM_SUSPEND_TO_IDLE] = pm_labels[PM_SUSPEND_TO_IDLE];
|
|
/*
|
|
* Suspend-to-idle should be supported even without any suspend_ops,
|
|
* initialize mem_sleep_states[] accordingly here.
|
|
*/
|
|
mem_sleep_states[PM_SUSPEND_TO_IDLE] = mem_sleep_labels[PM_SUSPEND_TO_IDLE];
|
|
}
|
|
|
|
static int __init mem_sleep_default_setup(char *str)
|
|
{
|
|
suspend_state_t state;
|
|
|
|
for (state = PM_SUSPEND_TO_IDLE; state <= PM_SUSPEND_MEM; state++)
|
|
if (mem_sleep_labels[state] &&
|
|
!strcmp(str, mem_sleep_labels[state])) {
|
|
mem_sleep_default = state;
|
|
break;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
__setup("mem_sleep_default=", mem_sleep_default_setup);
|
|
|
|
/**
|
|
* suspend_set_ops - Set the global suspend method table.
|
|
* @ops: Suspend operations to use.
|
|
*/
|
|
void suspend_set_ops(const struct platform_suspend_ops *ops)
|
|
{
|
|
lock_system_sleep();
|
|
|
|
suspend_ops = ops;
|
|
|
|
if (valid_state(PM_SUSPEND_STANDBY)) {
|
|
mem_sleep_states[PM_SUSPEND_STANDBY] = mem_sleep_labels[PM_SUSPEND_STANDBY];
|
|
pm_states[PM_SUSPEND_STANDBY] = pm_labels[PM_SUSPEND_STANDBY];
|
|
if (mem_sleep_default == PM_SUSPEND_STANDBY)
|
|
mem_sleep_current = PM_SUSPEND_STANDBY;
|
|
}
|
|
if (valid_state(PM_SUSPEND_MEM)) {
|
|
mem_sleep_states[PM_SUSPEND_MEM] = mem_sleep_labels[PM_SUSPEND_MEM];
|
|
if (mem_sleep_default >= PM_SUSPEND_MEM)
|
|
mem_sleep_current = PM_SUSPEND_MEM;
|
|
}
|
|
|
|
unlock_system_sleep();
|
|
}
|
|
EXPORT_SYMBOL_GPL(suspend_set_ops);
|
|
|
|
/**
|
|
* suspend_valid_only_mem - Generic memory-only valid callback.
|
|
*
|
|
* Platform drivers that implement mem suspend only and only need to check for
|
|
* that in their .valid() callback can use this instead of rolling their own
|
|
* .valid() callback.
|
|
*/
|
|
int suspend_valid_only_mem(suspend_state_t state)
|
|
{
|
|
return state == PM_SUSPEND_MEM;
|
|
}
|
|
EXPORT_SYMBOL_GPL(suspend_valid_only_mem);
|
|
|
|
static bool sleep_state_supported(suspend_state_t state)
|
|
{
|
|
return state == PM_SUSPEND_TO_IDLE || (suspend_ops && suspend_ops->enter);
|
|
}
|
|
|
|
static int platform_suspend_prepare(suspend_state_t state)
|
|
{
|
|
return state != PM_SUSPEND_TO_IDLE && suspend_ops->prepare ?
|
|
suspend_ops->prepare() : 0;
|
|
}
|
|
|
|
static int platform_suspend_prepare_late(suspend_state_t state)
|
|
{
|
|
return state == PM_SUSPEND_TO_IDLE && s2idle_ops && s2idle_ops->prepare ?
|
|
s2idle_ops->prepare() : 0;
|
|
}
|
|
|
|
static int platform_suspend_prepare_noirq(suspend_state_t state)
|
|
{
|
|
if (state == PM_SUSPEND_TO_IDLE) {
|
|
if (s2idle_ops && s2idle_ops->prepare_late)
|
|
return s2idle_ops->prepare_late();
|
|
}
|
|
return suspend_ops->prepare_late ? suspend_ops->prepare_late() : 0;
|
|
}
|
|
|
|
static void platform_resume_noirq(suspend_state_t state)
|
|
{
|
|
if (state == PM_SUSPEND_TO_IDLE) {
|
|
if (s2idle_ops && s2idle_ops->restore_early)
|
|
s2idle_ops->restore_early();
|
|
} else if (suspend_ops->wake)
|
|
suspend_ops->wake();
|
|
}
|
|
|
|
static void platform_resume_early(suspend_state_t state)
|
|
{
|
|
if (state == PM_SUSPEND_TO_IDLE && s2idle_ops && s2idle_ops->restore)
|
|
s2idle_ops->restore();
|
|
}
|
|
|
|
static void platform_resume_finish(suspend_state_t state)
|
|
{
|
|
if (state != PM_SUSPEND_TO_IDLE && suspend_ops->finish)
|
|
suspend_ops->finish();
|
|
}
|
|
|
|
static int platform_suspend_begin(suspend_state_t state)
|
|
{
|
|
if (state == PM_SUSPEND_TO_IDLE && s2idle_ops && s2idle_ops->begin)
|
|
return s2idle_ops->begin();
|
|
else if (suspend_ops && suspend_ops->begin)
|
|
return suspend_ops->begin(state);
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static void platform_resume_end(suspend_state_t state)
|
|
{
|
|
if (state == PM_SUSPEND_TO_IDLE && s2idle_ops && s2idle_ops->end)
|
|
s2idle_ops->end();
|
|
else if (suspend_ops && suspend_ops->end)
|
|
suspend_ops->end();
|
|
}
|
|
|
|
static void platform_recover(suspend_state_t state)
|
|
{
|
|
if (state != PM_SUSPEND_TO_IDLE && suspend_ops->recover)
|
|
suspend_ops->recover();
|
|
}
|
|
|
|
static bool platform_suspend_again(suspend_state_t state)
|
|
{
|
|
return state != PM_SUSPEND_TO_IDLE && suspend_ops->suspend_again ?
|
|
suspend_ops->suspend_again() : false;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_DEBUG
|
|
static unsigned int pm_test_delay = 5;
|
|
module_param(pm_test_delay, uint, 0644);
|
|
MODULE_PARM_DESC(pm_test_delay,
|
|
"Number of seconds to wait before resuming from suspend test");
|
|
#endif
|
|
|
|
static int suspend_test(int level)
|
|
{
|
|
#ifdef CONFIG_PM_DEBUG
|
|
if (pm_test_level == level) {
|
|
pr_info("suspend debug: Waiting for %d second(s).\n",
|
|
pm_test_delay);
|
|
mdelay(pm_test_delay * 1000);
|
|
return 1;
|
|
}
|
|
#endif /* !CONFIG_PM_DEBUG */
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* suspend_prepare - Prepare for entering system sleep state.
|
|
*
|
|
* Common code run for every system sleep state that can be entered (except for
|
|
* hibernation). Run suspend notifiers, allocate the "suspend" console and
|
|
* freeze processes.
|
|
*/
|
|
static int suspend_prepare(suspend_state_t state)
|
|
{
|
|
int error, nr_calls = 0;
|
|
|
|
if (!sleep_state_supported(state))
|
|
return -EPERM;
|
|
|
|
pm_prepare_console();
|
|
|
|
error = __pm_notifier_call_chain(PM_SUSPEND_PREPARE, -1, &nr_calls);
|
|
if (error) {
|
|
nr_calls--;
|
|
goto Finish;
|
|
}
|
|
|
|
trace_suspend_resume(TPS("freeze_processes"), 0, true);
|
|
error = suspend_freeze_processes();
|
|
trace_suspend_resume(TPS("freeze_processes"), 0, false);
|
|
if (!error)
|
|
return 0;
|
|
|
|
suspend_stats.failed_freeze++;
|
|
dpm_save_failed_step(SUSPEND_FREEZE);
|
|
Finish:
|
|
__pm_notifier_call_chain(PM_POST_SUSPEND, nr_calls, NULL);
|
|
pm_restore_console();
|
|
return error;
|
|
}
|
|
|
|
/* default implementation */
|
|
void __weak arch_suspend_disable_irqs(void)
|
|
{
|
|
local_irq_disable();
|
|
}
|
|
|
|
/* default implementation */
|
|
void __weak arch_suspend_enable_irqs(void)
|
|
{
|
|
local_irq_enable();
|
|
}
|
|
|
|
/**
|
|
* suspend_enter - Make the system enter the given sleep state.
|
|
* @state: System sleep state to enter.
|
|
* @wakeup: Returns information that the sleep state should not be re-entered.
|
|
*
|
|
* This function should be called after devices have been suspended.
|
|
*/
|
|
static int suspend_enter(suspend_state_t state, bool *wakeup)
|
|
{
|
|
int error;
|
|
|
|
error = platform_suspend_prepare(state);
|
|
if (error)
|
|
goto Platform_finish;
|
|
|
|
error = dpm_suspend_late(PMSG_SUSPEND);
|
|
if (error) {
|
|
pr_err("late suspend of devices failed\n");
|
|
goto Platform_finish;
|
|
}
|
|
error = platform_suspend_prepare_late(state);
|
|
if (error)
|
|
goto Devices_early_resume;
|
|
|
|
error = dpm_suspend_noirq(PMSG_SUSPEND);
|
|
if (error) {
|
|
pr_err("noirq suspend of devices failed\n");
|
|
goto Platform_early_resume;
|
|
}
|
|
error = platform_suspend_prepare_noirq(state);
|
|
if (error)
|
|
goto Platform_wake;
|
|
|
|
if (suspend_test(TEST_PLATFORM))
|
|
goto Platform_wake;
|
|
|
|
if (state == PM_SUSPEND_TO_IDLE) {
|
|
s2idle_loop();
|
|
goto Platform_wake;
|
|
}
|
|
|
|
error = suspend_disable_secondary_cpus();
|
|
if (error || suspend_test(TEST_CPUS))
|
|
goto Enable_cpus;
|
|
|
|
arch_suspend_disable_irqs();
|
|
BUG_ON(!irqs_disabled());
|
|
|
|
system_state = SYSTEM_SUSPEND;
|
|
|
|
error = syscore_suspend();
|
|
if (!error) {
|
|
*wakeup = pm_wakeup_pending();
|
|
if (!(suspend_test(TEST_CORE) || *wakeup)) {
|
|
trace_suspend_resume(TPS("machine_suspend"),
|
|
state, true);
|
|
error = suspend_ops->enter(state);
|
|
trace_suspend_resume(TPS("machine_suspend"),
|
|
state, false);
|
|
} else if (*wakeup) {
|
|
error = -EBUSY;
|
|
}
|
|
syscore_resume();
|
|
}
|
|
|
|
system_state = SYSTEM_RUNNING;
|
|
|
|
arch_suspend_enable_irqs();
|
|
BUG_ON(irqs_disabled());
|
|
|
|
Enable_cpus:
|
|
suspend_enable_secondary_cpus();
|
|
|
|
Platform_wake:
|
|
platform_resume_noirq(state);
|
|
dpm_resume_noirq(PMSG_RESUME);
|
|
|
|
Platform_early_resume:
|
|
platform_resume_early(state);
|
|
|
|
Devices_early_resume:
|
|
dpm_resume_early(PMSG_RESUME);
|
|
|
|
Platform_finish:
|
|
platform_resume_finish(state);
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* suspend_devices_and_enter - Suspend devices and enter system sleep state.
|
|
* @state: System sleep state to enter.
|
|
*/
|
|
int suspend_devices_and_enter(suspend_state_t state)
|
|
{
|
|
int error;
|
|
bool wakeup = false;
|
|
|
|
if (!sleep_state_supported(state))
|
|
return -ENOSYS;
|
|
|
|
pm_suspend_target_state = state;
|
|
|
|
if (state == PM_SUSPEND_TO_IDLE)
|
|
pm_set_suspend_no_platform();
|
|
|
|
error = platform_suspend_begin(state);
|
|
if (error)
|
|
goto Close;
|
|
|
|
suspend_console();
|
|
suspend_test_start();
|
|
error = dpm_suspend_start(PMSG_SUSPEND);
|
|
if (error) {
|
|
pr_err("Some devices failed to suspend, or early wake event detected\n");
|
|
goto Recover_platform;
|
|
}
|
|
suspend_test_finish("suspend devices");
|
|
if (suspend_test(TEST_DEVICES))
|
|
goto Recover_platform;
|
|
|
|
do {
|
|
error = suspend_enter(state, &wakeup);
|
|
} while (!error && !wakeup && platform_suspend_again(state));
|
|
|
|
Resume_devices:
|
|
suspend_test_start();
|
|
dpm_resume_end(PMSG_RESUME);
|
|
suspend_test_finish("resume devices");
|
|
trace_suspend_resume(TPS("resume_console"), state, true);
|
|
resume_console();
|
|
trace_suspend_resume(TPS("resume_console"), state, false);
|
|
|
|
Close:
|
|
platform_resume_end(state);
|
|
pm_suspend_target_state = PM_SUSPEND_ON;
|
|
return error;
|
|
|
|
Recover_platform:
|
|
platform_recover(state);
|
|
goto Resume_devices;
|
|
}
|
|
|
|
/**
|
|
* suspend_finish - Clean up before finishing the suspend sequence.
|
|
*
|
|
* Call platform code to clean up, restart processes, and free the console that
|
|
* we've allocated. This routine is not called for hibernation.
|
|
*/
|
|
static void suspend_finish(void)
|
|
{
|
|
suspend_thaw_processes();
|
|
pm_notifier_call_chain(PM_POST_SUSPEND);
|
|
pm_restore_console();
|
|
}
|
|
|
|
/**
|
|
* enter_state - Do common work needed to enter system sleep state.
|
|
* @state: System sleep state to enter.
|
|
*
|
|
* Make sure that no one else is trying to put the system into a sleep state.
|
|
* Fail if that's not the case. Otherwise, prepare for system suspend, make the
|
|
* system enter the given sleep state and clean up after wakeup.
|
|
*/
|
|
static int enter_state(suspend_state_t state)
|
|
{
|
|
int error;
|
|
|
|
trace_suspend_resume(TPS("suspend_enter"), state, true);
|
|
if (state == PM_SUSPEND_TO_IDLE) {
|
|
#ifdef CONFIG_PM_DEBUG
|
|
if (pm_test_level != TEST_NONE && pm_test_level <= TEST_CPUS) {
|
|
pr_warn("Unsupported test mode for suspend to idle, please choose none/freezer/devices/platform.\n");
|
|
return -EAGAIN;
|
|
}
|
|
#endif
|
|
} else if (!valid_state(state)) {
|
|
return -EINVAL;
|
|
}
|
|
if (!mutex_trylock(&system_transition_mutex))
|
|
return -EBUSY;
|
|
|
|
if (state == PM_SUSPEND_TO_IDLE)
|
|
s2idle_begin();
|
|
|
|
if (!IS_ENABLED(CONFIG_SUSPEND_SKIP_SYNC)) {
|
|
trace_suspend_resume(TPS("sync_filesystems"), 0, true);
|
|
ksys_sync_helper();
|
|
trace_suspend_resume(TPS("sync_filesystems"), 0, false);
|
|
}
|
|
|
|
pm_pr_dbg("Preparing system for sleep (%s)\n", mem_sleep_labels[state]);
|
|
pm_suspend_clear_flags();
|
|
error = suspend_prepare(state);
|
|
if (error)
|
|
goto Unlock;
|
|
|
|
if (suspend_test(TEST_FREEZER))
|
|
goto Finish;
|
|
|
|
trace_suspend_resume(TPS("suspend_enter"), state, false);
|
|
pm_pr_dbg("Suspending system (%s)\n", mem_sleep_labels[state]);
|
|
pm_restrict_gfp_mask();
|
|
error = suspend_devices_and_enter(state);
|
|
pm_restore_gfp_mask();
|
|
|
|
Finish:
|
|
events_check_enabled = false;
|
|
pm_pr_dbg("Finishing wakeup.\n");
|
|
suspend_finish();
|
|
Unlock:
|
|
mutex_unlock(&system_transition_mutex);
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* pm_suspend - Externally visible function for suspending the system.
|
|
* @state: System sleep state to enter.
|
|
*
|
|
* Check if the value of @state represents one of the supported states,
|
|
* execute enter_state() and update system suspend statistics.
|
|
*/
|
|
int pm_suspend(suspend_state_t state)
|
|
{
|
|
int error;
|
|
|
|
if (state <= PM_SUSPEND_ON || state >= PM_SUSPEND_MAX)
|
|
return -EINVAL;
|
|
|
|
pr_info("suspend entry (%s)\n", mem_sleep_labels[state]);
|
|
error = enter_state(state);
|
|
if (error) {
|
|
suspend_stats.fail++;
|
|
dpm_save_failed_errno(error);
|
|
} else {
|
|
suspend_stats.success++;
|
|
}
|
|
pr_info("suspend exit\n");
|
|
return error;
|
|
}
|
|
EXPORT_SYMBOL(pm_suspend);
|