forked from luck/tmp_suning_uos_patched
ad4c9a09c7
Luckily, this wasn't reported or reproduced. The logical operation for setting duplex had wrong grouping. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
4172 lines
108 KiB
C
4172 lines
108 KiB
C
/*
|
|
* QLogic QLA3xxx NIC HBA Driver
|
|
* Copyright (c) 2003-2006 QLogic Corporation
|
|
*
|
|
* See LICENSE.qla3xxx for copyright and licensing details.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
#include <linux/list.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/dmapool.h>
|
|
#include <linux/mempool.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/in.h>
|
|
#include <linux/if_arp.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/rtnetlink.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mm.h>
|
|
|
|
#include "qla3xxx.h"
|
|
|
|
#define DRV_NAME "qla3xxx"
|
|
#define DRV_STRING "QLogic ISP3XXX Network Driver"
|
|
#define DRV_VERSION "v2.03.00-k4"
|
|
#define PFX DRV_NAME " "
|
|
|
|
static const char ql3xxx_driver_name[] = DRV_NAME;
|
|
static const char ql3xxx_driver_version[] = DRV_VERSION;
|
|
|
|
MODULE_AUTHOR("QLogic Corporation");
|
|
MODULE_DESCRIPTION("QLogic ISP3XXX Network Driver " DRV_VERSION " ");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
static const u32 default_msg
|
|
= NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
|
|
| NETIF_MSG_IFUP | NETIF_MSG_IFDOWN;
|
|
|
|
static int debug = -1; /* defaults above */
|
|
module_param(debug, int, 0);
|
|
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
|
|
|
|
static int msi;
|
|
module_param(msi, int, 0);
|
|
MODULE_PARM_DESC(msi, "Turn on Message Signaled Interrupts.");
|
|
|
|
static struct pci_device_id ql3xxx_pci_tbl[] __devinitdata = {
|
|
{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QL3022_DEVICE_ID)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QL3032_DEVICE_ID)},
|
|
/* required last entry */
|
|
{0,}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, ql3xxx_pci_tbl);
|
|
|
|
/*
|
|
* These are the known PHY's which are used
|
|
*/
|
|
typedef enum {
|
|
PHY_TYPE_UNKNOWN = 0,
|
|
PHY_VITESSE_VSC8211,
|
|
PHY_AGERE_ET1011C,
|
|
MAX_PHY_DEV_TYPES
|
|
} PHY_DEVICE_et;
|
|
|
|
typedef struct {
|
|
PHY_DEVICE_et phyDevice;
|
|
u32 phyIdOUI;
|
|
u16 phyIdModel;
|
|
char *name;
|
|
} PHY_DEVICE_INFO_t;
|
|
|
|
static const PHY_DEVICE_INFO_t PHY_DEVICES[] =
|
|
{{PHY_TYPE_UNKNOWN, 0x000000, 0x0, "PHY_TYPE_UNKNOWN"},
|
|
{PHY_VITESSE_VSC8211, 0x0003f1, 0xb, "PHY_VITESSE_VSC8211"},
|
|
{PHY_AGERE_ET1011C, 0x00a0bc, 0x1, "PHY_AGERE_ET1011C"},
|
|
};
|
|
|
|
|
|
/*
|
|
* Caller must take hw_lock.
|
|
*/
|
|
static int ql_sem_spinlock(struct ql3_adapter *qdev,
|
|
u32 sem_mask, u32 sem_bits)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
|
|
u32 value;
|
|
unsigned int seconds = 3;
|
|
|
|
do {
|
|
writel((sem_mask | sem_bits),
|
|
&port_regs->CommonRegs.semaphoreReg);
|
|
value = readl(&port_regs->CommonRegs.semaphoreReg);
|
|
if ((value & (sem_mask >> 16)) == sem_bits)
|
|
return 0;
|
|
ssleep(1);
|
|
} while(--seconds);
|
|
return -1;
|
|
}
|
|
|
|
static void ql_sem_unlock(struct ql3_adapter *qdev, u32 sem_mask)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
|
|
writel(sem_mask, &port_regs->CommonRegs.semaphoreReg);
|
|
readl(&port_regs->CommonRegs.semaphoreReg);
|
|
}
|
|
|
|
static int ql_sem_lock(struct ql3_adapter *qdev, u32 sem_mask, u32 sem_bits)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
|
|
u32 value;
|
|
|
|
writel((sem_mask | sem_bits), &port_regs->CommonRegs.semaphoreReg);
|
|
value = readl(&port_regs->CommonRegs.semaphoreReg);
|
|
return ((value & (sem_mask >> 16)) == sem_bits);
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static int ql_wait_for_drvr_lock(struct ql3_adapter *qdev)
|
|
{
|
|
int i = 0;
|
|
|
|
while (1) {
|
|
if (!ql_sem_lock(qdev,
|
|
QL_DRVR_SEM_MASK,
|
|
(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index)
|
|
* 2) << 1)) {
|
|
if (i < 10) {
|
|
ssleep(1);
|
|
i++;
|
|
} else {
|
|
printk(KERN_ERR PFX "%s: Timed out waiting for "
|
|
"driver lock...\n",
|
|
qdev->ndev->name);
|
|
return 0;
|
|
}
|
|
} else {
|
|
printk(KERN_DEBUG PFX
|
|
"%s: driver lock acquired.\n",
|
|
qdev->ndev->name);
|
|
return 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ql_set_register_page(struct ql3_adapter *qdev, u32 page)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
|
|
|
|
writel(((ISP_CONTROL_NP_MASK << 16) | page),
|
|
&port_regs->CommonRegs.ispControlStatus);
|
|
readl(&port_regs->CommonRegs.ispControlStatus);
|
|
qdev->current_page = page;
|
|
}
|
|
|
|
static u32 ql_read_common_reg_l(struct ql3_adapter *qdev,
|
|
u32 __iomem * reg)
|
|
{
|
|
u32 value;
|
|
unsigned long hw_flags;
|
|
|
|
spin_lock_irqsave(&qdev->hw_lock, hw_flags);
|
|
value = readl(reg);
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
|
|
return value;
|
|
}
|
|
|
|
static u32 ql_read_common_reg(struct ql3_adapter *qdev,
|
|
u32 __iomem * reg)
|
|
{
|
|
return readl(reg);
|
|
}
|
|
|
|
static u32 ql_read_page0_reg_l(struct ql3_adapter *qdev, u32 __iomem *reg)
|
|
{
|
|
u32 value;
|
|
unsigned long hw_flags;
|
|
|
|
spin_lock_irqsave(&qdev->hw_lock, hw_flags);
|
|
|
|
if (qdev->current_page != 0)
|
|
ql_set_register_page(qdev,0);
|
|
value = readl(reg);
|
|
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
return value;
|
|
}
|
|
|
|
static u32 ql_read_page0_reg(struct ql3_adapter *qdev, u32 __iomem *reg)
|
|
{
|
|
if (qdev->current_page != 0)
|
|
ql_set_register_page(qdev,0);
|
|
return readl(reg);
|
|
}
|
|
|
|
static void ql_write_common_reg_l(struct ql3_adapter *qdev,
|
|
u32 __iomem *reg, u32 value)
|
|
{
|
|
unsigned long hw_flags;
|
|
|
|
spin_lock_irqsave(&qdev->hw_lock, hw_flags);
|
|
writel(value, reg);
|
|
readl(reg);
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
return;
|
|
}
|
|
|
|
static void ql_write_common_reg(struct ql3_adapter *qdev,
|
|
u32 __iomem *reg, u32 value)
|
|
{
|
|
writel(value, reg);
|
|
readl(reg);
|
|
return;
|
|
}
|
|
|
|
static void ql_write_nvram_reg(struct ql3_adapter *qdev,
|
|
u32 __iomem *reg, u32 value)
|
|
{
|
|
writel(value, reg);
|
|
readl(reg);
|
|
udelay(1);
|
|
return;
|
|
}
|
|
|
|
static void ql_write_page0_reg(struct ql3_adapter *qdev,
|
|
u32 __iomem *reg, u32 value)
|
|
{
|
|
if (qdev->current_page != 0)
|
|
ql_set_register_page(qdev,0);
|
|
writel(value, reg);
|
|
readl(reg);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock. Only called during init.
|
|
*/
|
|
static void ql_write_page1_reg(struct ql3_adapter *qdev,
|
|
u32 __iomem *reg, u32 value)
|
|
{
|
|
if (qdev->current_page != 1)
|
|
ql_set_register_page(qdev,1);
|
|
writel(value, reg);
|
|
readl(reg);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock. Only called during init.
|
|
*/
|
|
static void ql_write_page2_reg(struct ql3_adapter *qdev,
|
|
u32 __iomem *reg, u32 value)
|
|
{
|
|
if (qdev->current_page != 2)
|
|
ql_set_register_page(qdev,2);
|
|
writel(value, reg);
|
|
readl(reg);
|
|
return;
|
|
}
|
|
|
|
static void ql_disable_interrupts(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
|
|
|
|
ql_write_common_reg_l(qdev, &port_regs->CommonRegs.ispInterruptMaskReg,
|
|
(ISP_IMR_ENABLE_INT << 16));
|
|
|
|
}
|
|
|
|
static void ql_enable_interrupts(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
|
|
|
|
ql_write_common_reg_l(qdev, &port_regs->CommonRegs.ispInterruptMaskReg,
|
|
((0xff << 16) | ISP_IMR_ENABLE_INT));
|
|
|
|
}
|
|
|
|
static void ql_release_to_lrg_buf_free_list(struct ql3_adapter *qdev,
|
|
struct ql_rcv_buf_cb *lrg_buf_cb)
|
|
{
|
|
dma_addr_t map;
|
|
int err;
|
|
lrg_buf_cb->next = NULL;
|
|
|
|
if (qdev->lrg_buf_free_tail == NULL) { /* The list is empty */
|
|
qdev->lrg_buf_free_head = qdev->lrg_buf_free_tail = lrg_buf_cb;
|
|
} else {
|
|
qdev->lrg_buf_free_tail->next = lrg_buf_cb;
|
|
qdev->lrg_buf_free_tail = lrg_buf_cb;
|
|
}
|
|
|
|
if (!lrg_buf_cb->skb) {
|
|
lrg_buf_cb->skb = netdev_alloc_skb(qdev->ndev,
|
|
qdev->lrg_buffer_len);
|
|
if (unlikely(!lrg_buf_cb->skb)) {
|
|
printk(KERN_ERR PFX "%s: failed netdev_alloc_skb().\n",
|
|
qdev->ndev->name);
|
|
qdev->lrg_buf_skb_check++;
|
|
} else {
|
|
/*
|
|
* We save some space to copy the ethhdr from first
|
|
* buffer
|
|
*/
|
|
skb_reserve(lrg_buf_cb->skb, QL_HEADER_SPACE);
|
|
map = pci_map_single(qdev->pdev,
|
|
lrg_buf_cb->skb->data,
|
|
qdev->lrg_buffer_len -
|
|
QL_HEADER_SPACE,
|
|
PCI_DMA_FROMDEVICE);
|
|
err = pci_dma_mapping_error(map);
|
|
if(err) {
|
|
printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
|
|
qdev->ndev->name, err);
|
|
dev_kfree_skb(lrg_buf_cb->skb);
|
|
lrg_buf_cb->skb = NULL;
|
|
|
|
qdev->lrg_buf_skb_check++;
|
|
return;
|
|
}
|
|
|
|
lrg_buf_cb->buf_phy_addr_low =
|
|
cpu_to_le32(LS_64BITS(map));
|
|
lrg_buf_cb->buf_phy_addr_high =
|
|
cpu_to_le32(MS_64BITS(map));
|
|
pci_unmap_addr_set(lrg_buf_cb, mapaddr, map);
|
|
pci_unmap_len_set(lrg_buf_cb, maplen,
|
|
qdev->lrg_buffer_len -
|
|
QL_HEADER_SPACE);
|
|
}
|
|
}
|
|
|
|
qdev->lrg_buf_free_count++;
|
|
}
|
|
|
|
static struct ql_rcv_buf_cb *ql_get_from_lrg_buf_free_list(struct ql3_adapter
|
|
*qdev)
|
|
{
|
|
struct ql_rcv_buf_cb *lrg_buf_cb;
|
|
|
|
if ((lrg_buf_cb = qdev->lrg_buf_free_head) != NULL) {
|
|
if ((qdev->lrg_buf_free_head = lrg_buf_cb->next) == NULL)
|
|
qdev->lrg_buf_free_tail = NULL;
|
|
qdev->lrg_buf_free_count--;
|
|
}
|
|
|
|
return lrg_buf_cb;
|
|
}
|
|
|
|
static u32 addrBits = EEPROM_NO_ADDR_BITS;
|
|
static u32 dataBits = EEPROM_NO_DATA_BITS;
|
|
|
|
static void fm93c56a_deselect(struct ql3_adapter *qdev);
|
|
static void eeprom_readword(struct ql3_adapter *qdev, u32 eepromAddr,
|
|
unsigned short *value);
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static void fm93c56a_select(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
|
|
qdev->eeprom_cmd_data = AUBURN_EEPROM_CS_1;
|
|
ql_write_nvram_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
|
|
ISP_NVRAM_MASK | qdev->eeprom_cmd_data);
|
|
ql_write_nvram_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
|
|
((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data));
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static void fm93c56a_cmd(struct ql3_adapter *qdev, u32 cmd, u32 eepromAddr)
|
|
{
|
|
int i;
|
|
u32 mask;
|
|
u32 dataBit;
|
|
u32 previousBit;
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
|
|
/* Clock in a zero, then do the start bit */
|
|
ql_write_nvram_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
|
|
ISP_NVRAM_MASK | qdev->eeprom_cmd_data |
|
|
AUBURN_EEPROM_DO_1);
|
|
ql_write_nvram_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
|
|
ISP_NVRAM_MASK | qdev->
|
|
eeprom_cmd_data | AUBURN_EEPROM_DO_1 |
|
|
AUBURN_EEPROM_CLK_RISE);
|
|
ql_write_nvram_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
|
|
ISP_NVRAM_MASK | qdev->
|
|
eeprom_cmd_data | AUBURN_EEPROM_DO_1 |
|
|
AUBURN_EEPROM_CLK_FALL);
|
|
|
|
mask = 1 << (FM93C56A_CMD_BITS - 1);
|
|
/* Force the previous data bit to be different */
|
|
previousBit = 0xffff;
|
|
for (i = 0; i < FM93C56A_CMD_BITS; i++) {
|
|
dataBit =
|
|
(cmd & mask) ? AUBURN_EEPROM_DO_1 : AUBURN_EEPROM_DO_0;
|
|
if (previousBit != dataBit) {
|
|
/*
|
|
* If the bit changed, then change the DO state to
|
|
* match
|
|
*/
|
|
ql_write_nvram_reg(qdev,
|
|
&port_regs->CommonRegs.
|
|
serialPortInterfaceReg,
|
|
ISP_NVRAM_MASK | qdev->
|
|
eeprom_cmd_data | dataBit);
|
|
previousBit = dataBit;
|
|
}
|
|
ql_write_nvram_reg(qdev,
|
|
&port_regs->CommonRegs.
|
|
serialPortInterfaceReg,
|
|
ISP_NVRAM_MASK | qdev->
|
|
eeprom_cmd_data | dataBit |
|
|
AUBURN_EEPROM_CLK_RISE);
|
|
ql_write_nvram_reg(qdev,
|
|
&port_regs->CommonRegs.
|
|
serialPortInterfaceReg,
|
|
ISP_NVRAM_MASK | qdev->
|
|
eeprom_cmd_data | dataBit |
|
|
AUBURN_EEPROM_CLK_FALL);
|
|
cmd = cmd << 1;
|
|
}
|
|
|
|
mask = 1 << (addrBits - 1);
|
|
/* Force the previous data bit to be different */
|
|
previousBit = 0xffff;
|
|
for (i = 0; i < addrBits; i++) {
|
|
dataBit =
|
|
(eepromAddr & mask) ? AUBURN_EEPROM_DO_1 :
|
|
AUBURN_EEPROM_DO_0;
|
|
if (previousBit != dataBit) {
|
|
/*
|
|
* If the bit changed, then change the DO state to
|
|
* match
|
|
*/
|
|
ql_write_nvram_reg(qdev,
|
|
&port_regs->CommonRegs.
|
|
serialPortInterfaceReg,
|
|
ISP_NVRAM_MASK | qdev->
|
|
eeprom_cmd_data | dataBit);
|
|
previousBit = dataBit;
|
|
}
|
|
ql_write_nvram_reg(qdev,
|
|
&port_regs->CommonRegs.
|
|
serialPortInterfaceReg,
|
|
ISP_NVRAM_MASK | qdev->
|
|
eeprom_cmd_data | dataBit |
|
|
AUBURN_EEPROM_CLK_RISE);
|
|
ql_write_nvram_reg(qdev,
|
|
&port_regs->CommonRegs.
|
|
serialPortInterfaceReg,
|
|
ISP_NVRAM_MASK | qdev->
|
|
eeprom_cmd_data | dataBit |
|
|
AUBURN_EEPROM_CLK_FALL);
|
|
eepromAddr = eepromAddr << 1;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static void fm93c56a_deselect(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
qdev->eeprom_cmd_data = AUBURN_EEPROM_CS_0;
|
|
ql_write_nvram_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
|
|
ISP_NVRAM_MASK | qdev->eeprom_cmd_data);
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static void fm93c56a_datain(struct ql3_adapter *qdev, unsigned short *value)
|
|
{
|
|
int i;
|
|
u32 data = 0;
|
|
u32 dataBit;
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
|
|
/* Read the data bits */
|
|
/* The first bit is a dummy. Clock right over it. */
|
|
for (i = 0; i < dataBits; i++) {
|
|
ql_write_nvram_reg(qdev,
|
|
&port_regs->CommonRegs.
|
|
serialPortInterfaceReg,
|
|
ISP_NVRAM_MASK | qdev->eeprom_cmd_data |
|
|
AUBURN_EEPROM_CLK_RISE);
|
|
ql_write_nvram_reg(qdev,
|
|
&port_regs->CommonRegs.
|
|
serialPortInterfaceReg,
|
|
ISP_NVRAM_MASK | qdev->eeprom_cmd_data |
|
|
AUBURN_EEPROM_CLK_FALL);
|
|
dataBit =
|
|
(ql_read_common_reg
|
|
(qdev,
|
|
&port_regs->CommonRegs.
|
|
serialPortInterfaceReg) & AUBURN_EEPROM_DI_1) ? 1 : 0;
|
|
data = (data << 1) | dataBit;
|
|
}
|
|
*value = (u16) data;
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static void eeprom_readword(struct ql3_adapter *qdev,
|
|
u32 eepromAddr, unsigned short *value)
|
|
{
|
|
fm93c56a_select(qdev);
|
|
fm93c56a_cmd(qdev, (int)FM93C56A_READ, eepromAddr);
|
|
fm93c56a_datain(qdev, value);
|
|
fm93c56a_deselect(qdev);
|
|
}
|
|
|
|
static void ql_swap_mac_addr(u8 * macAddress)
|
|
{
|
|
#ifdef __BIG_ENDIAN
|
|
u8 temp;
|
|
temp = macAddress[0];
|
|
macAddress[0] = macAddress[1];
|
|
macAddress[1] = temp;
|
|
temp = macAddress[2];
|
|
macAddress[2] = macAddress[3];
|
|
macAddress[3] = temp;
|
|
temp = macAddress[4];
|
|
macAddress[4] = macAddress[5];
|
|
macAddress[5] = temp;
|
|
#endif
|
|
}
|
|
|
|
static int ql_get_nvram_params(struct ql3_adapter *qdev)
|
|
{
|
|
u16 *pEEPROMData;
|
|
u16 checksum = 0;
|
|
u32 index;
|
|
unsigned long hw_flags;
|
|
|
|
spin_lock_irqsave(&qdev->hw_lock, hw_flags);
|
|
|
|
pEEPROMData = (u16 *) & qdev->nvram_data;
|
|
qdev->eeprom_cmd_data = 0;
|
|
if(ql_sem_spinlock(qdev, QL_NVRAM_SEM_MASK,
|
|
(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
|
|
2) << 10)) {
|
|
printk(KERN_ERR PFX"%s: Failed ql_sem_spinlock().\n",
|
|
__func__);
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
return -1;
|
|
}
|
|
|
|
for (index = 0; index < EEPROM_SIZE; index++) {
|
|
eeprom_readword(qdev, index, pEEPROMData);
|
|
checksum += *pEEPROMData;
|
|
pEEPROMData++;
|
|
}
|
|
ql_sem_unlock(qdev, QL_NVRAM_SEM_MASK);
|
|
|
|
if (checksum != 0) {
|
|
printk(KERN_ERR PFX "%s: checksum should be zero, is %x!!\n",
|
|
qdev->ndev->name, checksum);
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* We have a problem with endianness for the MAC addresses
|
|
* and the two 8-bit values version, and numPorts. We
|
|
* have to swap them on big endian systems.
|
|
*/
|
|
ql_swap_mac_addr(qdev->nvram_data.funcCfg_fn0.macAddress);
|
|
ql_swap_mac_addr(qdev->nvram_data.funcCfg_fn1.macAddress);
|
|
ql_swap_mac_addr(qdev->nvram_data.funcCfg_fn2.macAddress);
|
|
ql_swap_mac_addr(qdev->nvram_data.funcCfg_fn3.macAddress);
|
|
pEEPROMData = (u16 *) & qdev->nvram_data.version;
|
|
*pEEPROMData = le16_to_cpu(*pEEPROMData);
|
|
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
return checksum;
|
|
}
|
|
|
|
static const u32 PHYAddr[2] = {
|
|
PORT0_PHY_ADDRESS, PORT1_PHY_ADDRESS
|
|
};
|
|
|
|
static int ql_wait_for_mii_ready(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
u32 temp;
|
|
int count = 1000;
|
|
|
|
while (count) {
|
|
temp = ql_read_page0_reg(qdev, &port_regs->macMIIStatusReg);
|
|
if (!(temp & MAC_MII_STATUS_BSY))
|
|
return 0;
|
|
udelay(10);
|
|
count--;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static void ql_mii_enable_scan_mode(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
u32 scanControl;
|
|
|
|
if (qdev->numPorts > 1) {
|
|
/* Auto scan will cycle through multiple ports */
|
|
scanControl = MAC_MII_CONTROL_AS | MAC_MII_CONTROL_SC;
|
|
} else {
|
|
scanControl = MAC_MII_CONTROL_SC;
|
|
}
|
|
|
|
/*
|
|
* Scan register 1 of PHY/PETBI,
|
|
* Set up to scan both devices
|
|
* The autoscan starts from the first register, completes
|
|
* the last one before rolling over to the first
|
|
*/
|
|
ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg,
|
|
PHYAddr[0] | MII_SCAN_REGISTER);
|
|
|
|
ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg,
|
|
(scanControl) |
|
|
((MAC_MII_CONTROL_SC | MAC_MII_CONTROL_AS) << 16));
|
|
}
|
|
|
|
static u8 ql_mii_disable_scan_mode(struct ql3_adapter *qdev)
|
|
{
|
|
u8 ret;
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
|
|
/* See if scan mode is enabled before we turn it off */
|
|
if (ql_read_page0_reg(qdev, &port_regs->macMIIMgmtControlReg) &
|
|
(MAC_MII_CONTROL_AS | MAC_MII_CONTROL_SC)) {
|
|
/* Scan is enabled */
|
|
ret = 1;
|
|
} else {
|
|
/* Scan is disabled */
|
|
ret = 0;
|
|
}
|
|
|
|
/*
|
|
* When disabling scan mode you must first change the MII register
|
|
* address
|
|
*/
|
|
ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg,
|
|
PHYAddr[0] | MII_SCAN_REGISTER);
|
|
|
|
ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg,
|
|
((MAC_MII_CONTROL_SC | MAC_MII_CONTROL_AS |
|
|
MAC_MII_CONTROL_RC) << 16));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ql_mii_write_reg_ex(struct ql3_adapter *qdev,
|
|
u16 regAddr, u16 value, u32 phyAddr)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
u8 scanWasEnabled;
|
|
|
|
scanWasEnabled = ql_mii_disable_scan_mode(qdev);
|
|
|
|
if (ql_wait_for_mii_ready(qdev)) {
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_WARNING PFX
|
|
"%s Timed out waiting for management port to "
|
|
"get free before issuing command.\n",
|
|
qdev->ndev->name);
|
|
return -1;
|
|
}
|
|
|
|
ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg,
|
|
phyAddr | regAddr);
|
|
|
|
ql_write_page0_reg(qdev, &port_regs->macMIIMgmtDataReg, value);
|
|
|
|
/* Wait for write to complete 9/10/04 SJP */
|
|
if (ql_wait_for_mii_ready(qdev)) {
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_WARNING PFX
|
|
"%s: Timed out waiting for management port to"
|
|
"get free before issuing command.\n",
|
|
qdev->ndev->name);
|
|
return -1;
|
|
}
|
|
|
|
if (scanWasEnabled)
|
|
ql_mii_enable_scan_mode(qdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ql_mii_read_reg_ex(struct ql3_adapter *qdev, u16 regAddr,
|
|
u16 * value, u32 phyAddr)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
u8 scanWasEnabled;
|
|
u32 temp;
|
|
|
|
scanWasEnabled = ql_mii_disable_scan_mode(qdev);
|
|
|
|
if (ql_wait_for_mii_ready(qdev)) {
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_WARNING PFX
|
|
"%s: Timed out waiting for management port to "
|
|
"get free before issuing command.\n",
|
|
qdev->ndev->name);
|
|
return -1;
|
|
}
|
|
|
|
ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg,
|
|
phyAddr | regAddr);
|
|
|
|
ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg,
|
|
(MAC_MII_CONTROL_RC << 16));
|
|
|
|
ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg,
|
|
(MAC_MII_CONTROL_RC << 16) | MAC_MII_CONTROL_RC);
|
|
|
|
/* Wait for the read to complete */
|
|
if (ql_wait_for_mii_ready(qdev)) {
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_WARNING PFX
|
|
"%s: Timed out waiting for management port to "
|
|
"get free after issuing command.\n",
|
|
qdev->ndev->name);
|
|
return -1;
|
|
}
|
|
|
|
temp = ql_read_page0_reg(qdev, &port_regs->macMIIMgmtDataReg);
|
|
*value = (u16) temp;
|
|
|
|
if (scanWasEnabled)
|
|
ql_mii_enable_scan_mode(qdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ql_mii_write_reg(struct ql3_adapter *qdev, u16 regAddr, u16 value)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
|
|
ql_mii_disable_scan_mode(qdev);
|
|
|
|
if (ql_wait_for_mii_ready(qdev)) {
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_WARNING PFX
|
|
"%s: Timed out waiting for management port to "
|
|
"get free before issuing command.\n",
|
|
qdev->ndev->name);
|
|
return -1;
|
|
}
|
|
|
|
ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg,
|
|
qdev->PHYAddr | regAddr);
|
|
|
|
ql_write_page0_reg(qdev, &port_regs->macMIIMgmtDataReg, value);
|
|
|
|
/* Wait for write to complete. */
|
|
if (ql_wait_for_mii_ready(qdev)) {
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_WARNING PFX
|
|
"%s: Timed out waiting for management port to "
|
|
"get free before issuing command.\n",
|
|
qdev->ndev->name);
|
|
return -1;
|
|
}
|
|
|
|
ql_mii_enable_scan_mode(qdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ql_mii_read_reg(struct ql3_adapter *qdev, u16 regAddr, u16 *value)
|
|
{
|
|
u32 temp;
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
|
|
ql_mii_disable_scan_mode(qdev);
|
|
|
|
if (ql_wait_for_mii_ready(qdev)) {
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_WARNING PFX
|
|
"%s: Timed out waiting for management port to "
|
|
"get free before issuing command.\n",
|
|
qdev->ndev->name);
|
|
return -1;
|
|
}
|
|
|
|
ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg,
|
|
qdev->PHYAddr | regAddr);
|
|
|
|
ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg,
|
|
(MAC_MII_CONTROL_RC << 16));
|
|
|
|
ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg,
|
|
(MAC_MII_CONTROL_RC << 16) | MAC_MII_CONTROL_RC);
|
|
|
|
/* Wait for the read to complete */
|
|
if (ql_wait_for_mii_ready(qdev)) {
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_WARNING PFX
|
|
"%s: Timed out waiting for management port to "
|
|
"get free before issuing command.\n",
|
|
qdev->ndev->name);
|
|
return -1;
|
|
}
|
|
|
|
temp = ql_read_page0_reg(qdev, &port_regs->macMIIMgmtDataReg);
|
|
*value = (u16) temp;
|
|
|
|
ql_mii_enable_scan_mode(qdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ql_petbi_reset(struct ql3_adapter *qdev)
|
|
{
|
|
ql_mii_write_reg(qdev, PETBI_CONTROL_REG, PETBI_CTRL_SOFT_RESET);
|
|
}
|
|
|
|
static void ql_petbi_start_neg(struct ql3_adapter *qdev)
|
|
{
|
|
u16 reg;
|
|
|
|
/* Enable Auto-negotiation sense */
|
|
ql_mii_read_reg(qdev, PETBI_TBI_CTRL, ®);
|
|
reg |= PETBI_TBI_AUTO_SENSE;
|
|
ql_mii_write_reg(qdev, PETBI_TBI_CTRL, reg);
|
|
|
|
ql_mii_write_reg(qdev, PETBI_NEG_ADVER,
|
|
PETBI_NEG_PAUSE | PETBI_NEG_DUPLEX);
|
|
|
|
ql_mii_write_reg(qdev, PETBI_CONTROL_REG,
|
|
PETBI_CTRL_AUTO_NEG | PETBI_CTRL_RESTART_NEG |
|
|
PETBI_CTRL_FULL_DUPLEX | PETBI_CTRL_SPEED_1000);
|
|
|
|
}
|
|
|
|
static void ql_petbi_reset_ex(struct ql3_adapter *qdev)
|
|
{
|
|
ql_mii_write_reg_ex(qdev, PETBI_CONTROL_REG, PETBI_CTRL_SOFT_RESET,
|
|
PHYAddr[qdev->mac_index]);
|
|
}
|
|
|
|
static void ql_petbi_start_neg_ex(struct ql3_adapter *qdev)
|
|
{
|
|
u16 reg;
|
|
|
|
/* Enable Auto-negotiation sense */
|
|
ql_mii_read_reg_ex(qdev, PETBI_TBI_CTRL, ®,
|
|
PHYAddr[qdev->mac_index]);
|
|
reg |= PETBI_TBI_AUTO_SENSE;
|
|
ql_mii_write_reg_ex(qdev, PETBI_TBI_CTRL, reg,
|
|
PHYAddr[qdev->mac_index]);
|
|
|
|
ql_mii_write_reg_ex(qdev, PETBI_NEG_ADVER,
|
|
PETBI_NEG_PAUSE | PETBI_NEG_DUPLEX,
|
|
PHYAddr[qdev->mac_index]);
|
|
|
|
ql_mii_write_reg_ex(qdev, PETBI_CONTROL_REG,
|
|
PETBI_CTRL_AUTO_NEG | PETBI_CTRL_RESTART_NEG |
|
|
PETBI_CTRL_FULL_DUPLEX | PETBI_CTRL_SPEED_1000,
|
|
PHYAddr[qdev->mac_index]);
|
|
}
|
|
|
|
static void ql_petbi_init(struct ql3_adapter *qdev)
|
|
{
|
|
ql_petbi_reset(qdev);
|
|
ql_petbi_start_neg(qdev);
|
|
}
|
|
|
|
static void ql_petbi_init_ex(struct ql3_adapter *qdev)
|
|
{
|
|
ql_petbi_reset_ex(qdev);
|
|
ql_petbi_start_neg_ex(qdev);
|
|
}
|
|
|
|
static int ql_is_petbi_neg_pause(struct ql3_adapter *qdev)
|
|
{
|
|
u16 reg;
|
|
|
|
if (ql_mii_read_reg(qdev, PETBI_NEG_PARTNER, ®) < 0)
|
|
return 0;
|
|
|
|
return (reg & PETBI_NEG_PAUSE_MASK) == PETBI_NEG_PAUSE;
|
|
}
|
|
|
|
static void phyAgereSpecificInit(struct ql3_adapter *qdev, u32 miiAddr)
|
|
{
|
|
printk(KERN_INFO "%s: enabling Agere specific PHY\n", qdev->ndev->name);
|
|
/* power down device bit 11 = 1 */
|
|
ql_mii_write_reg_ex(qdev, 0x00, 0x1940, miiAddr);
|
|
/* enable diagnostic mode bit 2 = 1 */
|
|
ql_mii_write_reg_ex(qdev, 0x12, 0x840e, miiAddr);
|
|
/* 1000MB amplitude adjust (see Agere errata) */
|
|
ql_mii_write_reg_ex(qdev, 0x10, 0x8805, miiAddr);
|
|
/* 1000MB amplitude adjust (see Agere errata) */
|
|
ql_mii_write_reg_ex(qdev, 0x11, 0xf03e, miiAddr);
|
|
/* 100MB amplitude adjust (see Agere errata) */
|
|
ql_mii_write_reg_ex(qdev, 0x10, 0x8806, miiAddr);
|
|
/* 100MB amplitude adjust (see Agere errata) */
|
|
ql_mii_write_reg_ex(qdev, 0x11, 0x003e, miiAddr);
|
|
/* 10MB amplitude adjust (see Agere errata) */
|
|
ql_mii_write_reg_ex(qdev, 0x10, 0x8807, miiAddr);
|
|
/* 10MB amplitude adjust (see Agere errata) */
|
|
ql_mii_write_reg_ex(qdev, 0x11, 0x1f00, miiAddr);
|
|
/* point to hidden reg 0x2806 */
|
|
ql_mii_write_reg_ex(qdev, 0x10, 0x2806, miiAddr);
|
|
/* Write new PHYAD w/bit 5 set */
|
|
ql_mii_write_reg_ex(qdev, 0x11, 0x0020 | (PHYAddr[qdev->mac_index] >> 8), miiAddr);
|
|
/*
|
|
* Disable diagnostic mode bit 2 = 0
|
|
* Power up device bit 11 = 0
|
|
* Link up (on) and activity (blink)
|
|
*/
|
|
ql_mii_write_reg(qdev, 0x12, 0x840a);
|
|
ql_mii_write_reg(qdev, 0x00, 0x1140);
|
|
ql_mii_write_reg(qdev, 0x1c, 0xfaf0);
|
|
}
|
|
|
|
static PHY_DEVICE_et getPhyType (struct ql3_adapter *qdev,
|
|
u16 phyIdReg0, u16 phyIdReg1)
|
|
{
|
|
PHY_DEVICE_et result = PHY_TYPE_UNKNOWN;
|
|
u32 oui;
|
|
u16 model;
|
|
int i;
|
|
|
|
if (phyIdReg0 == 0xffff) {
|
|
return result;
|
|
}
|
|
|
|
if (phyIdReg1 == 0xffff) {
|
|
return result;
|
|
}
|
|
|
|
/* oui is split between two registers */
|
|
oui = (phyIdReg0 << 6) | ((phyIdReg1 & PHY_OUI_1_MASK) >> 10);
|
|
|
|
model = (phyIdReg1 & PHY_MODEL_MASK) >> 4;
|
|
|
|
/* Scan table for this PHY */
|
|
for(i = 0; i < MAX_PHY_DEV_TYPES; i++) {
|
|
if ((oui == PHY_DEVICES[i].phyIdOUI) && (model == PHY_DEVICES[i].phyIdModel))
|
|
{
|
|
result = PHY_DEVICES[i].phyDevice;
|
|
|
|
printk(KERN_INFO "%s: Phy: %s\n",
|
|
qdev->ndev->name, PHY_DEVICES[i].name);
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
static int ql_phy_get_speed(struct ql3_adapter *qdev)
|
|
{
|
|
u16 reg;
|
|
|
|
switch(qdev->phyType) {
|
|
case PHY_AGERE_ET1011C:
|
|
{
|
|
if (ql_mii_read_reg(qdev, 0x1A, ®) < 0)
|
|
return 0;
|
|
|
|
reg = (reg >> 8) & 3;
|
|
break;
|
|
}
|
|
default:
|
|
if (ql_mii_read_reg(qdev, AUX_CONTROL_STATUS, ®) < 0)
|
|
return 0;
|
|
|
|
reg = (((reg & 0x18) >> 3) & 3);
|
|
}
|
|
|
|
switch(reg) {
|
|
case 2:
|
|
return SPEED_1000;
|
|
case 1:
|
|
return SPEED_100;
|
|
case 0:
|
|
return SPEED_10;
|
|
default:
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
static int ql_is_full_dup(struct ql3_adapter *qdev)
|
|
{
|
|
u16 reg;
|
|
|
|
switch(qdev->phyType) {
|
|
case PHY_AGERE_ET1011C:
|
|
{
|
|
if (ql_mii_read_reg(qdev, 0x1A, ®))
|
|
return 0;
|
|
|
|
return ((reg & 0x0080) && (reg & 0x1000)) != 0;
|
|
}
|
|
case PHY_VITESSE_VSC8211:
|
|
default:
|
|
{
|
|
if (ql_mii_read_reg(qdev, AUX_CONTROL_STATUS, ®) < 0)
|
|
return 0;
|
|
return (reg & PHY_AUX_DUPLEX_STAT) != 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int ql_is_phy_neg_pause(struct ql3_adapter *qdev)
|
|
{
|
|
u16 reg;
|
|
|
|
if (ql_mii_read_reg(qdev, PHY_NEG_PARTNER, ®) < 0)
|
|
return 0;
|
|
|
|
return (reg & PHY_NEG_PAUSE) != 0;
|
|
}
|
|
|
|
static int PHY_Setup(struct ql3_adapter *qdev)
|
|
{
|
|
u16 reg1;
|
|
u16 reg2;
|
|
bool agereAddrChangeNeeded = false;
|
|
u32 miiAddr = 0;
|
|
int err;
|
|
|
|
/* Determine the PHY we are using by reading the ID's */
|
|
err = ql_mii_read_reg(qdev, PHY_ID_0_REG, ®1);
|
|
if(err != 0) {
|
|
printk(KERN_ERR "%s: Could not read from reg PHY_ID_0_REG\n",
|
|
qdev->ndev->name);
|
|
return err;
|
|
}
|
|
|
|
err = ql_mii_read_reg(qdev, PHY_ID_1_REG, ®2);
|
|
if(err != 0) {
|
|
printk(KERN_ERR "%s: Could not read from reg PHY_ID_0_REG\n",
|
|
qdev->ndev->name);
|
|
return err;
|
|
}
|
|
|
|
/* Check if we have a Agere PHY */
|
|
if ((reg1 == 0xffff) || (reg2 == 0xffff)) {
|
|
|
|
/* Determine which MII address we should be using
|
|
determined by the index of the card */
|
|
if (qdev->mac_index == 0) {
|
|
miiAddr = MII_AGERE_ADDR_1;
|
|
} else {
|
|
miiAddr = MII_AGERE_ADDR_2;
|
|
}
|
|
|
|
err =ql_mii_read_reg_ex(qdev, PHY_ID_0_REG, ®1, miiAddr);
|
|
if(err != 0) {
|
|
printk(KERN_ERR "%s: Could not read from reg PHY_ID_0_REG after Agere detected\n",
|
|
qdev->ndev->name);
|
|
return err;
|
|
}
|
|
|
|
err = ql_mii_read_reg_ex(qdev, PHY_ID_1_REG, ®2, miiAddr);
|
|
if(err != 0) {
|
|
printk(KERN_ERR "%s: Could not read from reg PHY_ID_0_REG after Agere detected\n",
|
|
qdev->ndev->name);
|
|
return err;
|
|
}
|
|
|
|
/* We need to remember to initialize the Agere PHY */
|
|
agereAddrChangeNeeded = true;
|
|
}
|
|
|
|
/* Determine the particular PHY we have on board to apply
|
|
PHY specific initializations */
|
|
qdev->phyType = getPhyType(qdev, reg1, reg2);
|
|
|
|
if ((qdev->phyType == PHY_AGERE_ET1011C) && agereAddrChangeNeeded) {
|
|
/* need this here so address gets changed */
|
|
phyAgereSpecificInit(qdev, miiAddr);
|
|
} else if (qdev->phyType == PHY_TYPE_UNKNOWN) {
|
|
printk(KERN_ERR "%s: PHY is unknown\n", qdev->ndev->name);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static void ql_mac_enable(struct ql3_adapter *qdev, u32 enable)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
u32 value;
|
|
|
|
if (enable)
|
|
value = (MAC_CONFIG_REG_PE | (MAC_CONFIG_REG_PE << 16));
|
|
else
|
|
value = (MAC_CONFIG_REG_PE << 16);
|
|
|
|
if (qdev->mac_index)
|
|
ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value);
|
|
else
|
|
ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value);
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static void ql_mac_cfg_soft_reset(struct ql3_adapter *qdev, u32 enable)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
u32 value;
|
|
|
|
if (enable)
|
|
value = (MAC_CONFIG_REG_SR | (MAC_CONFIG_REG_SR << 16));
|
|
else
|
|
value = (MAC_CONFIG_REG_SR << 16);
|
|
|
|
if (qdev->mac_index)
|
|
ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value);
|
|
else
|
|
ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value);
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static void ql_mac_cfg_gig(struct ql3_adapter *qdev, u32 enable)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
u32 value;
|
|
|
|
if (enable)
|
|
value = (MAC_CONFIG_REG_GM | (MAC_CONFIG_REG_GM << 16));
|
|
else
|
|
value = (MAC_CONFIG_REG_GM << 16);
|
|
|
|
if (qdev->mac_index)
|
|
ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value);
|
|
else
|
|
ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value);
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static void ql_mac_cfg_full_dup(struct ql3_adapter *qdev, u32 enable)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
u32 value;
|
|
|
|
if (enable)
|
|
value = (MAC_CONFIG_REG_FD | (MAC_CONFIG_REG_FD << 16));
|
|
else
|
|
value = (MAC_CONFIG_REG_FD << 16);
|
|
|
|
if (qdev->mac_index)
|
|
ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value);
|
|
else
|
|
ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value);
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static void ql_mac_cfg_pause(struct ql3_adapter *qdev, u32 enable)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
u32 value;
|
|
|
|
if (enable)
|
|
value =
|
|
((MAC_CONFIG_REG_TF | MAC_CONFIG_REG_RF) |
|
|
((MAC_CONFIG_REG_TF | MAC_CONFIG_REG_RF) << 16));
|
|
else
|
|
value = ((MAC_CONFIG_REG_TF | MAC_CONFIG_REG_RF) << 16);
|
|
|
|
if (qdev->mac_index)
|
|
ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value);
|
|
else
|
|
ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value);
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static int ql_is_fiber(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
u32 bitToCheck = 0;
|
|
u32 temp;
|
|
|
|
switch (qdev->mac_index) {
|
|
case 0:
|
|
bitToCheck = PORT_STATUS_SM0;
|
|
break;
|
|
case 1:
|
|
bitToCheck = PORT_STATUS_SM1;
|
|
break;
|
|
}
|
|
|
|
temp = ql_read_page0_reg(qdev, &port_regs->portStatus);
|
|
return (temp & bitToCheck) != 0;
|
|
}
|
|
|
|
static int ql_is_auto_cfg(struct ql3_adapter *qdev)
|
|
{
|
|
u16 reg;
|
|
ql_mii_read_reg(qdev, 0x00, ®);
|
|
return (reg & 0x1000) != 0;
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static int ql_is_auto_neg_complete(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
u32 bitToCheck = 0;
|
|
u32 temp;
|
|
|
|
switch (qdev->mac_index) {
|
|
case 0:
|
|
bitToCheck = PORT_STATUS_AC0;
|
|
break;
|
|
case 1:
|
|
bitToCheck = PORT_STATUS_AC1;
|
|
break;
|
|
}
|
|
|
|
temp = ql_read_page0_reg(qdev, &port_regs->portStatus);
|
|
if (temp & bitToCheck) {
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_INFO PFX
|
|
"%s: Auto-Negotiate complete.\n",
|
|
qdev->ndev->name);
|
|
return 1;
|
|
} else {
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_WARNING PFX
|
|
"%s: Auto-Negotiate incomplete.\n",
|
|
qdev->ndev->name);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* ql_is_neg_pause() returns 1 if pause was negotiated to be on
|
|
*/
|
|
static int ql_is_neg_pause(struct ql3_adapter *qdev)
|
|
{
|
|
if (ql_is_fiber(qdev))
|
|
return ql_is_petbi_neg_pause(qdev);
|
|
else
|
|
return ql_is_phy_neg_pause(qdev);
|
|
}
|
|
|
|
static int ql_auto_neg_error(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
u32 bitToCheck = 0;
|
|
u32 temp;
|
|
|
|
switch (qdev->mac_index) {
|
|
case 0:
|
|
bitToCheck = PORT_STATUS_AE0;
|
|
break;
|
|
case 1:
|
|
bitToCheck = PORT_STATUS_AE1;
|
|
break;
|
|
}
|
|
temp = ql_read_page0_reg(qdev, &port_regs->portStatus);
|
|
return (temp & bitToCheck) != 0;
|
|
}
|
|
|
|
static u32 ql_get_link_speed(struct ql3_adapter *qdev)
|
|
{
|
|
if (ql_is_fiber(qdev))
|
|
return SPEED_1000;
|
|
else
|
|
return ql_phy_get_speed(qdev);
|
|
}
|
|
|
|
static int ql_is_link_full_dup(struct ql3_adapter *qdev)
|
|
{
|
|
if (ql_is_fiber(qdev))
|
|
return 1;
|
|
else
|
|
return ql_is_full_dup(qdev);
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static int ql_link_down_detect(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
u32 bitToCheck = 0;
|
|
u32 temp;
|
|
|
|
switch (qdev->mac_index) {
|
|
case 0:
|
|
bitToCheck = ISP_CONTROL_LINK_DN_0;
|
|
break;
|
|
case 1:
|
|
bitToCheck = ISP_CONTROL_LINK_DN_1;
|
|
break;
|
|
}
|
|
|
|
temp =
|
|
ql_read_common_reg(qdev, &port_regs->CommonRegs.ispControlStatus);
|
|
return (temp & bitToCheck) != 0;
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static int ql_link_down_detect_clear(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
|
|
switch (qdev->mac_index) {
|
|
case 0:
|
|
ql_write_common_reg(qdev,
|
|
&port_regs->CommonRegs.ispControlStatus,
|
|
(ISP_CONTROL_LINK_DN_0) |
|
|
(ISP_CONTROL_LINK_DN_0 << 16));
|
|
break;
|
|
|
|
case 1:
|
|
ql_write_common_reg(qdev,
|
|
&port_regs->CommonRegs.ispControlStatus,
|
|
(ISP_CONTROL_LINK_DN_1) |
|
|
(ISP_CONTROL_LINK_DN_1 << 16));
|
|
break;
|
|
|
|
default:
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static int ql_this_adapter_controls_port(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
u32 bitToCheck = 0;
|
|
u32 temp;
|
|
|
|
switch (qdev->mac_index) {
|
|
case 0:
|
|
bitToCheck = PORT_STATUS_F1_ENABLED;
|
|
break;
|
|
case 1:
|
|
bitToCheck = PORT_STATUS_F3_ENABLED;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
temp = ql_read_page0_reg(qdev, &port_regs->portStatus);
|
|
if (temp & bitToCheck) {
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_DEBUG PFX
|
|
"%s: is not link master.\n", qdev->ndev->name);
|
|
return 0;
|
|
} else {
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_DEBUG PFX
|
|
"%s: is link master.\n", qdev->ndev->name);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
static void ql_phy_reset_ex(struct ql3_adapter *qdev)
|
|
{
|
|
ql_mii_write_reg_ex(qdev, CONTROL_REG, PHY_CTRL_SOFT_RESET,
|
|
PHYAddr[qdev->mac_index]);
|
|
}
|
|
|
|
static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
|
|
{
|
|
u16 reg;
|
|
u16 portConfiguration;
|
|
|
|
if(qdev->phyType == PHY_AGERE_ET1011C) {
|
|
/* turn off external loopback */
|
|
ql_mii_write_reg(qdev, 0x13, 0x0000);
|
|
}
|
|
|
|
if(qdev->mac_index == 0)
|
|
portConfiguration = qdev->nvram_data.macCfg_port0.portConfiguration;
|
|
else
|
|
portConfiguration = qdev->nvram_data.macCfg_port1.portConfiguration;
|
|
|
|
/* Some HBA's in the field are set to 0 and they need to
|
|
be reinterpreted with a default value */
|
|
if(portConfiguration == 0)
|
|
portConfiguration = PORT_CONFIG_DEFAULT;
|
|
|
|
/* Set the 1000 advertisements */
|
|
ql_mii_read_reg_ex(qdev, PHY_GIG_CONTROL, ®,
|
|
PHYAddr[qdev->mac_index]);
|
|
reg &= ~PHY_GIG_ALL_PARAMS;
|
|
|
|
if(portConfiguration & PORT_CONFIG_1000MB_SPEED) {
|
|
if(portConfiguration & PORT_CONFIG_FULL_DUPLEX_ENABLED)
|
|
reg |= PHY_GIG_ADV_1000F;
|
|
else
|
|
reg |= PHY_GIG_ADV_1000H;
|
|
}
|
|
|
|
ql_mii_write_reg_ex(qdev, PHY_GIG_CONTROL, reg,
|
|
PHYAddr[qdev->mac_index]);
|
|
|
|
/* Set the 10/100 & pause negotiation advertisements */
|
|
ql_mii_read_reg_ex(qdev, PHY_NEG_ADVER, ®,
|
|
PHYAddr[qdev->mac_index]);
|
|
reg &= ~PHY_NEG_ALL_PARAMS;
|
|
|
|
if(portConfiguration & PORT_CONFIG_SYM_PAUSE_ENABLED)
|
|
reg |= PHY_NEG_ASY_PAUSE | PHY_NEG_SYM_PAUSE;
|
|
|
|
if(portConfiguration & PORT_CONFIG_FULL_DUPLEX_ENABLED) {
|
|
if(portConfiguration & PORT_CONFIG_100MB_SPEED)
|
|
reg |= PHY_NEG_ADV_100F;
|
|
|
|
if(portConfiguration & PORT_CONFIG_10MB_SPEED)
|
|
reg |= PHY_NEG_ADV_10F;
|
|
}
|
|
|
|
if(portConfiguration & PORT_CONFIG_HALF_DUPLEX_ENABLED) {
|
|
if(portConfiguration & PORT_CONFIG_100MB_SPEED)
|
|
reg |= PHY_NEG_ADV_100H;
|
|
|
|
if(portConfiguration & PORT_CONFIG_10MB_SPEED)
|
|
reg |= PHY_NEG_ADV_10H;
|
|
}
|
|
|
|
if(portConfiguration &
|
|
PORT_CONFIG_1000MB_SPEED) {
|
|
reg |= 1;
|
|
}
|
|
|
|
ql_mii_write_reg_ex(qdev, PHY_NEG_ADVER, reg,
|
|
PHYAddr[qdev->mac_index]);
|
|
|
|
ql_mii_read_reg_ex(qdev, CONTROL_REG, ®, PHYAddr[qdev->mac_index]);
|
|
|
|
ql_mii_write_reg_ex(qdev, CONTROL_REG,
|
|
reg | PHY_CTRL_RESTART_NEG | PHY_CTRL_AUTO_NEG,
|
|
PHYAddr[qdev->mac_index]);
|
|
}
|
|
|
|
static void ql_phy_init_ex(struct ql3_adapter *qdev)
|
|
{
|
|
ql_phy_reset_ex(qdev);
|
|
PHY_Setup(qdev);
|
|
ql_phy_start_neg_ex(qdev);
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static u32 ql_get_link_state(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
u32 bitToCheck = 0;
|
|
u32 temp, linkState;
|
|
|
|
switch (qdev->mac_index) {
|
|
case 0:
|
|
bitToCheck = PORT_STATUS_UP0;
|
|
break;
|
|
case 1:
|
|
bitToCheck = PORT_STATUS_UP1;
|
|
break;
|
|
}
|
|
temp = ql_read_page0_reg(qdev, &port_regs->portStatus);
|
|
if (temp & bitToCheck) {
|
|
linkState = LS_UP;
|
|
} else {
|
|
linkState = LS_DOWN;
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_WARNING PFX
|
|
"%s: Link is down.\n", qdev->ndev->name);
|
|
}
|
|
return linkState;
|
|
}
|
|
|
|
static int ql_port_start(struct ql3_adapter *qdev)
|
|
{
|
|
if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK,
|
|
(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
|
|
2) << 7)) {
|
|
printk(KERN_ERR "%s: Could not get hw lock for GIO\n",
|
|
qdev->ndev->name);
|
|
return -1;
|
|
}
|
|
|
|
if (ql_is_fiber(qdev)) {
|
|
ql_petbi_init(qdev);
|
|
} else {
|
|
/* Copper port */
|
|
ql_phy_init_ex(qdev);
|
|
}
|
|
|
|
ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
|
|
return 0;
|
|
}
|
|
|
|
static int ql_finish_auto_neg(struct ql3_adapter *qdev)
|
|
{
|
|
|
|
if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK,
|
|
(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
|
|
2) << 7))
|
|
return -1;
|
|
|
|
if (!ql_auto_neg_error(qdev)) {
|
|
if (test_bit(QL_LINK_MASTER,&qdev->flags)) {
|
|
/* configure the MAC */
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_DEBUG PFX
|
|
"%s: Configuring link.\n",
|
|
qdev->ndev->
|
|
name);
|
|
ql_mac_cfg_soft_reset(qdev, 1);
|
|
ql_mac_cfg_gig(qdev,
|
|
(ql_get_link_speed
|
|
(qdev) ==
|
|
SPEED_1000));
|
|
ql_mac_cfg_full_dup(qdev,
|
|
ql_is_link_full_dup
|
|
(qdev));
|
|
ql_mac_cfg_pause(qdev,
|
|
ql_is_neg_pause
|
|
(qdev));
|
|
ql_mac_cfg_soft_reset(qdev, 0);
|
|
|
|
/* enable the MAC */
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_DEBUG PFX
|
|
"%s: Enabling mac.\n",
|
|
qdev->ndev->
|
|
name);
|
|
ql_mac_enable(qdev, 1);
|
|
}
|
|
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_DEBUG PFX
|
|
"%s: Change port_link_state LS_DOWN to LS_UP.\n",
|
|
qdev->ndev->name);
|
|
qdev->port_link_state = LS_UP;
|
|
netif_start_queue(qdev->ndev);
|
|
netif_carrier_on(qdev->ndev);
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_INFO PFX
|
|
"%s: Link is up at %d Mbps, %s duplex.\n",
|
|
qdev->ndev->name,
|
|
ql_get_link_speed(qdev),
|
|
ql_is_link_full_dup(qdev)
|
|
? "full" : "half");
|
|
|
|
} else { /* Remote error detected */
|
|
|
|
if (test_bit(QL_LINK_MASTER,&qdev->flags)) {
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_DEBUG PFX
|
|
"%s: Remote error detected. "
|
|
"Calling ql_port_start().\n",
|
|
qdev->ndev->
|
|
name);
|
|
/*
|
|
* ql_port_start() is shared code and needs
|
|
* to lock the PHY on it's own.
|
|
*/
|
|
ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
|
|
if(ql_port_start(qdev)) {/* Restart port */
|
|
return -1;
|
|
} else
|
|
return 0;
|
|
}
|
|
}
|
|
ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
|
|
return 0;
|
|
}
|
|
|
|
static void ql_link_state_machine_work(struct work_struct *work)
|
|
{
|
|
struct ql3_adapter *qdev =
|
|
container_of(work, struct ql3_adapter, link_state_work.work);
|
|
|
|
u32 curr_link_state;
|
|
unsigned long hw_flags;
|
|
|
|
spin_lock_irqsave(&qdev->hw_lock, hw_flags);
|
|
|
|
curr_link_state = ql_get_link_state(qdev);
|
|
|
|
if (test_bit(QL_RESET_ACTIVE,&qdev->flags)) {
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_INFO PFX
|
|
"%s: Reset in progress, skip processing link "
|
|
"state.\n", qdev->ndev->name);
|
|
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
|
|
/* Restart timer on 2 second interval. */
|
|
mod_timer(&qdev->adapter_timer, jiffies + HZ * 1);\
|
|
|
|
return;
|
|
}
|
|
|
|
switch (qdev->port_link_state) {
|
|
default:
|
|
if (test_bit(QL_LINK_MASTER,&qdev->flags)) {
|
|
ql_port_start(qdev);
|
|
}
|
|
qdev->port_link_state = LS_DOWN;
|
|
/* Fall Through */
|
|
|
|
case LS_DOWN:
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_DEBUG PFX
|
|
"%s: port_link_state = LS_DOWN.\n",
|
|
qdev->ndev->name);
|
|
if (curr_link_state == LS_UP) {
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_DEBUG PFX
|
|
"%s: curr_link_state = LS_UP.\n",
|
|
qdev->ndev->name);
|
|
if (ql_is_auto_neg_complete(qdev))
|
|
ql_finish_auto_neg(qdev);
|
|
|
|
if (qdev->port_link_state == LS_UP)
|
|
ql_link_down_detect_clear(qdev);
|
|
|
|
}
|
|
break;
|
|
|
|
case LS_UP:
|
|
/*
|
|
* See if the link is currently down or went down and came
|
|
* back up
|
|
*/
|
|
if ((curr_link_state == LS_DOWN) || ql_link_down_detect(qdev)) {
|
|
if (netif_msg_link(qdev))
|
|
printk(KERN_INFO PFX "%s: Link is down.\n",
|
|
qdev->ndev->name);
|
|
qdev->port_link_state = LS_DOWN;
|
|
}
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
|
|
/* Restart timer on 2 second interval. */
|
|
mod_timer(&qdev->adapter_timer, jiffies + HZ * 1);
|
|
}
|
|
|
|
/*
|
|
* Caller must take hw_lock and QL_PHY_GIO_SEM.
|
|
*/
|
|
static void ql_get_phy_owner(struct ql3_adapter *qdev)
|
|
{
|
|
if (ql_this_adapter_controls_port(qdev))
|
|
set_bit(QL_LINK_MASTER,&qdev->flags);
|
|
else
|
|
clear_bit(QL_LINK_MASTER,&qdev->flags);
|
|
}
|
|
|
|
/*
|
|
* Caller must take hw_lock and QL_PHY_GIO_SEM.
|
|
*/
|
|
static void ql_init_scan_mode(struct ql3_adapter *qdev)
|
|
{
|
|
ql_mii_enable_scan_mode(qdev);
|
|
|
|
if (test_bit(QL_LINK_OPTICAL,&qdev->flags)) {
|
|
if (ql_this_adapter_controls_port(qdev))
|
|
ql_petbi_init_ex(qdev);
|
|
} else {
|
|
if (ql_this_adapter_controls_port(qdev))
|
|
ql_phy_init_ex(qdev);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* MII_Setup needs to be called before taking the PHY out of reset so that the
|
|
* management interface clock speed can be set properly. It would be better if
|
|
* we had a way to disable MDC until after the PHY is out of reset, but we
|
|
* don't have that capability.
|
|
*/
|
|
static int ql_mii_setup(struct ql3_adapter *qdev)
|
|
{
|
|
u32 reg;
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
|
|
if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK,
|
|
(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
|
|
2) << 7))
|
|
return -1;
|
|
|
|
if (qdev->device_id == QL3032_DEVICE_ID)
|
|
ql_write_page0_reg(qdev,
|
|
&port_regs->macMIIMgmtControlReg, 0x0f00000);
|
|
|
|
/* Divide 125MHz clock by 28 to meet PHY timing requirements */
|
|
reg = MAC_MII_CONTROL_CLK_SEL_DIV28;
|
|
|
|
ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg,
|
|
reg | ((MAC_MII_CONTROL_CLK_SEL_MASK) << 16));
|
|
|
|
ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
|
|
return 0;
|
|
}
|
|
|
|
static u32 ql_supported_modes(struct ql3_adapter *qdev)
|
|
{
|
|
u32 supported;
|
|
|
|
if (test_bit(QL_LINK_OPTICAL,&qdev->flags)) {
|
|
supported = SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE
|
|
| SUPPORTED_Autoneg;
|
|
} else {
|
|
supported = SUPPORTED_10baseT_Half
|
|
| SUPPORTED_10baseT_Full
|
|
| SUPPORTED_100baseT_Half
|
|
| SUPPORTED_100baseT_Full
|
|
| SUPPORTED_1000baseT_Half
|
|
| SUPPORTED_1000baseT_Full
|
|
| SUPPORTED_Autoneg | SUPPORTED_TP;
|
|
}
|
|
|
|
return supported;
|
|
}
|
|
|
|
static int ql_get_auto_cfg_status(struct ql3_adapter *qdev)
|
|
{
|
|
int status;
|
|
unsigned long hw_flags;
|
|
spin_lock_irqsave(&qdev->hw_lock, hw_flags);
|
|
if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK,
|
|
(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
|
|
2) << 7)) {
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
return 0;
|
|
}
|
|
status = ql_is_auto_cfg(qdev);
|
|
ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
return status;
|
|
}
|
|
|
|
static u32 ql_get_speed(struct ql3_adapter *qdev)
|
|
{
|
|
u32 status;
|
|
unsigned long hw_flags;
|
|
spin_lock_irqsave(&qdev->hw_lock, hw_flags);
|
|
if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK,
|
|
(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
|
|
2) << 7)) {
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
return 0;
|
|
}
|
|
status = ql_get_link_speed(qdev);
|
|
ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
return status;
|
|
}
|
|
|
|
static int ql_get_full_dup(struct ql3_adapter *qdev)
|
|
{
|
|
int status;
|
|
unsigned long hw_flags;
|
|
spin_lock_irqsave(&qdev->hw_lock, hw_flags);
|
|
if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK,
|
|
(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
|
|
2) << 7)) {
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
return 0;
|
|
}
|
|
status = ql_is_link_full_dup(qdev);
|
|
ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
return status;
|
|
}
|
|
|
|
|
|
static int ql_get_settings(struct net_device *ndev, struct ethtool_cmd *ecmd)
|
|
{
|
|
struct ql3_adapter *qdev = netdev_priv(ndev);
|
|
|
|
ecmd->transceiver = XCVR_INTERNAL;
|
|
ecmd->supported = ql_supported_modes(qdev);
|
|
|
|
if (test_bit(QL_LINK_OPTICAL,&qdev->flags)) {
|
|
ecmd->port = PORT_FIBRE;
|
|
} else {
|
|
ecmd->port = PORT_TP;
|
|
ecmd->phy_address = qdev->PHYAddr;
|
|
}
|
|
ecmd->advertising = ql_supported_modes(qdev);
|
|
ecmd->autoneg = ql_get_auto_cfg_status(qdev);
|
|
ecmd->speed = ql_get_speed(qdev);
|
|
ecmd->duplex = ql_get_full_dup(qdev);
|
|
return 0;
|
|
}
|
|
|
|
static void ql_get_drvinfo(struct net_device *ndev,
|
|
struct ethtool_drvinfo *drvinfo)
|
|
{
|
|
struct ql3_adapter *qdev = netdev_priv(ndev);
|
|
strncpy(drvinfo->driver, ql3xxx_driver_name, 32);
|
|
strncpy(drvinfo->version, ql3xxx_driver_version, 32);
|
|
strncpy(drvinfo->fw_version, "N/A", 32);
|
|
strncpy(drvinfo->bus_info, pci_name(qdev->pdev), 32);
|
|
drvinfo->regdump_len = 0;
|
|
drvinfo->eedump_len = 0;
|
|
}
|
|
|
|
static u32 ql_get_msglevel(struct net_device *ndev)
|
|
{
|
|
struct ql3_adapter *qdev = netdev_priv(ndev);
|
|
return qdev->msg_enable;
|
|
}
|
|
|
|
static void ql_set_msglevel(struct net_device *ndev, u32 value)
|
|
{
|
|
struct ql3_adapter *qdev = netdev_priv(ndev);
|
|
qdev->msg_enable = value;
|
|
}
|
|
|
|
static void ql_get_pauseparam(struct net_device *ndev,
|
|
struct ethtool_pauseparam *pause)
|
|
{
|
|
struct ql3_adapter *qdev = netdev_priv(ndev);
|
|
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
|
|
|
|
u32 reg;
|
|
if(qdev->mac_index == 0)
|
|
reg = ql_read_page0_reg(qdev, &port_regs->mac0ConfigReg);
|
|
else
|
|
reg = ql_read_page0_reg(qdev, &port_regs->mac1ConfigReg);
|
|
|
|
pause->autoneg = ql_get_auto_cfg_status(qdev);
|
|
pause->rx_pause = (reg & MAC_CONFIG_REG_RF) >> 2;
|
|
pause->tx_pause = (reg & MAC_CONFIG_REG_TF) >> 1;
|
|
}
|
|
|
|
static const struct ethtool_ops ql3xxx_ethtool_ops = {
|
|
.get_settings = ql_get_settings,
|
|
.get_drvinfo = ql_get_drvinfo,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_msglevel = ql_get_msglevel,
|
|
.set_msglevel = ql_set_msglevel,
|
|
.get_pauseparam = ql_get_pauseparam,
|
|
};
|
|
|
|
static int ql_populate_free_queue(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql_rcv_buf_cb *lrg_buf_cb = qdev->lrg_buf_free_head;
|
|
dma_addr_t map;
|
|
int err;
|
|
|
|
while (lrg_buf_cb) {
|
|
if (!lrg_buf_cb->skb) {
|
|
lrg_buf_cb->skb = netdev_alloc_skb(qdev->ndev,
|
|
qdev->lrg_buffer_len);
|
|
if (unlikely(!lrg_buf_cb->skb)) {
|
|
printk(KERN_DEBUG PFX
|
|
"%s: Failed netdev_alloc_skb().\n",
|
|
qdev->ndev->name);
|
|
break;
|
|
} else {
|
|
/*
|
|
* We save some space to copy the ethhdr from
|
|
* first buffer
|
|
*/
|
|
skb_reserve(lrg_buf_cb->skb, QL_HEADER_SPACE);
|
|
map = pci_map_single(qdev->pdev,
|
|
lrg_buf_cb->skb->data,
|
|
qdev->lrg_buffer_len -
|
|
QL_HEADER_SPACE,
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
err = pci_dma_mapping_error(map);
|
|
if(err) {
|
|
printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
|
|
qdev->ndev->name, err);
|
|
dev_kfree_skb(lrg_buf_cb->skb);
|
|
lrg_buf_cb->skb = NULL;
|
|
break;
|
|
}
|
|
|
|
|
|
lrg_buf_cb->buf_phy_addr_low =
|
|
cpu_to_le32(LS_64BITS(map));
|
|
lrg_buf_cb->buf_phy_addr_high =
|
|
cpu_to_le32(MS_64BITS(map));
|
|
pci_unmap_addr_set(lrg_buf_cb, mapaddr, map);
|
|
pci_unmap_len_set(lrg_buf_cb, maplen,
|
|
qdev->lrg_buffer_len -
|
|
QL_HEADER_SPACE);
|
|
--qdev->lrg_buf_skb_check;
|
|
if (!qdev->lrg_buf_skb_check)
|
|
return 1;
|
|
}
|
|
}
|
|
lrg_buf_cb = lrg_buf_cb->next;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static void ql_update_small_bufq_prod_index(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
|
|
if (qdev->small_buf_release_cnt >= 16) {
|
|
while (qdev->small_buf_release_cnt >= 16) {
|
|
qdev->small_buf_q_producer_index++;
|
|
|
|
if (qdev->small_buf_q_producer_index ==
|
|
NUM_SBUFQ_ENTRIES)
|
|
qdev->small_buf_q_producer_index = 0;
|
|
qdev->small_buf_release_cnt -= 8;
|
|
}
|
|
wmb();
|
|
writel(qdev->small_buf_q_producer_index,
|
|
&port_regs->CommonRegs.rxSmallQProducerIndex);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static void ql_update_lrg_bufq_prod_index(struct ql3_adapter *qdev)
|
|
{
|
|
struct bufq_addr_element *lrg_buf_q_ele;
|
|
int i;
|
|
struct ql_rcv_buf_cb *lrg_buf_cb;
|
|
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
|
|
|
|
if ((qdev->lrg_buf_free_count >= 8)
|
|
&& (qdev->lrg_buf_release_cnt >= 16)) {
|
|
|
|
if (qdev->lrg_buf_skb_check)
|
|
if (!ql_populate_free_queue(qdev))
|
|
return;
|
|
|
|
lrg_buf_q_ele = qdev->lrg_buf_next_free;
|
|
|
|
while ((qdev->lrg_buf_release_cnt >= 16)
|
|
&& (qdev->lrg_buf_free_count >= 8)) {
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
lrg_buf_cb =
|
|
ql_get_from_lrg_buf_free_list(qdev);
|
|
lrg_buf_q_ele->addr_high =
|
|
lrg_buf_cb->buf_phy_addr_high;
|
|
lrg_buf_q_ele->addr_low =
|
|
lrg_buf_cb->buf_phy_addr_low;
|
|
lrg_buf_q_ele++;
|
|
|
|
qdev->lrg_buf_release_cnt--;
|
|
}
|
|
|
|
qdev->lrg_buf_q_producer_index++;
|
|
|
|
if (qdev->lrg_buf_q_producer_index == qdev->num_lbufq_entries)
|
|
qdev->lrg_buf_q_producer_index = 0;
|
|
|
|
if (qdev->lrg_buf_q_producer_index ==
|
|
(qdev->num_lbufq_entries - 1)) {
|
|
lrg_buf_q_ele = qdev->lrg_buf_q_virt_addr;
|
|
}
|
|
}
|
|
wmb();
|
|
qdev->lrg_buf_next_free = lrg_buf_q_ele;
|
|
writel(qdev->lrg_buf_q_producer_index,
|
|
&port_regs->CommonRegs.rxLargeQProducerIndex);
|
|
}
|
|
}
|
|
|
|
static void ql_process_mac_tx_intr(struct ql3_adapter *qdev,
|
|
struct ob_mac_iocb_rsp *mac_rsp)
|
|
{
|
|
struct ql_tx_buf_cb *tx_cb;
|
|
int i;
|
|
int retval = 0;
|
|
|
|
if(mac_rsp->flags & OB_MAC_IOCB_RSP_S) {
|
|
printk(KERN_WARNING "Frame short but, frame was padded and sent.\n");
|
|
}
|
|
|
|
tx_cb = &qdev->tx_buf[mac_rsp->transaction_id];
|
|
|
|
/* Check the transmit response flags for any errors */
|
|
if(mac_rsp->flags & OB_MAC_IOCB_RSP_S) {
|
|
printk(KERN_ERR "Frame too short to be legal, frame not sent.\n");
|
|
|
|
qdev->ndev->stats.tx_errors++;
|
|
retval = -EIO;
|
|
goto frame_not_sent;
|
|
}
|
|
|
|
if(tx_cb->seg_count == 0) {
|
|
printk(KERN_ERR "tx_cb->seg_count == 0: %d\n", mac_rsp->transaction_id);
|
|
|
|
qdev->ndev->stats.tx_errors++;
|
|
retval = -EIO;
|
|
goto invalid_seg_count;
|
|
}
|
|
|
|
pci_unmap_single(qdev->pdev,
|
|
pci_unmap_addr(&tx_cb->map[0], mapaddr),
|
|
pci_unmap_len(&tx_cb->map[0], maplen),
|
|
PCI_DMA_TODEVICE);
|
|
tx_cb->seg_count--;
|
|
if (tx_cb->seg_count) {
|
|
for (i = 1; i < tx_cb->seg_count; i++) {
|
|
pci_unmap_page(qdev->pdev,
|
|
pci_unmap_addr(&tx_cb->map[i],
|
|
mapaddr),
|
|
pci_unmap_len(&tx_cb->map[i], maplen),
|
|
PCI_DMA_TODEVICE);
|
|
}
|
|
}
|
|
qdev->ndev->stats.tx_packets++;
|
|
qdev->ndev->stats.tx_bytes += tx_cb->skb->len;
|
|
|
|
frame_not_sent:
|
|
dev_kfree_skb_irq(tx_cb->skb);
|
|
tx_cb->skb = NULL;
|
|
|
|
invalid_seg_count:
|
|
atomic_inc(&qdev->tx_count);
|
|
}
|
|
|
|
static void ql_get_sbuf(struct ql3_adapter *qdev)
|
|
{
|
|
if (++qdev->small_buf_index == NUM_SMALL_BUFFERS)
|
|
qdev->small_buf_index = 0;
|
|
qdev->small_buf_release_cnt++;
|
|
}
|
|
|
|
static struct ql_rcv_buf_cb *ql_get_lbuf(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql_rcv_buf_cb *lrg_buf_cb = NULL;
|
|
lrg_buf_cb = &qdev->lrg_buf[qdev->lrg_buf_index];
|
|
qdev->lrg_buf_release_cnt++;
|
|
if (++qdev->lrg_buf_index == qdev->num_large_buffers)
|
|
qdev->lrg_buf_index = 0;
|
|
return(lrg_buf_cb);
|
|
}
|
|
|
|
/*
|
|
* The difference between 3022 and 3032 for inbound completions:
|
|
* 3022 uses two buffers per completion. The first buffer contains
|
|
* (some) header info, the second the remainder of the headers plus
|
|
* the data. For this chip we reserve some space at the top of the
|
|
* receive buffer so that the header info in buffer one can be
|
|
* prepended to the buffer two. Buffer two is the sent up while
|
|
* buffer one is returned to the hardware to be reused.
|
|
* 3032 receives all of it's data and headers in one buffer for a
|
|
* simpler process. 3032 also supports checksum verification as
|
|
* can be seen in ql_process_macip_rx_intr().
|
|
*/
|
|
static void ql_process_mac_rx_intr(struct ql3_adapter *qdev,
|
|
struct ib_mac_iocb_rsp *ib_mac_rsp_ptr)
|
|
{
|
|
struct ql_rcv_buf_cb *lrg_buf_cb1 = NULL;
|
|
struct ql_rcv_buf_cb *lrg_buf_cb2 = NULL;
|
|
struct sk_buff *skb;
|
|
u16 length = le16_to_cpu(ib_mac_rsp_ptr->length);
|
|
|
|
/*
|
|
* Get the inbound address list (small buffer).
|
|
*/
|
|
ql_get_sbuf(qdev);
|
|
|
|
if (qdev->device_id == QL3022_DEVICE_ID)
|
|
lrg_buf_cb1 = ql_get_lbuf(qdev);
|
|
|
|
/* start of second buffer */
|
|
lrg_buf_cb2 = ql_get_lbuf(qdev);
|
|
skb = lrg_buf_cb2->skb;
|
|
|
|
qdev->ndev->stats.rx_packets++;
|
|
qdev->ndev->stats.rx_bytes += length;
|
|
|
|
skb_put(skb, length);
|
|
pci_unmap_single(qdev->pdev,
|
|
pci_unmap_addr(lrg_buf_cb2, mapaddr),
|
|
pci_unmap_len(lrg_buf_cb2, maplen),
|
|
PCI_DMA_FROMDEVICE);
|
|
prefetch(skb->data);
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
skb->protocol = eth_type_trans(skb, qdev->ndev);
|
|
|
|
netif_receive_skb(skb);
|
|
qdev->ndev->last_rx = jiffies;
|
|
lrg_buf_cb2->skb = NULL;
|
|
|
|
if (qdev->device_id == QL3022_DEVICE_ID)
|
|
ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb1);
|
|
ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb2);
|
|
}
|
|
|
|
static void ql_process_macip_rx_intr(struct ql3_adapter *qdev,
|
|
struct ib_ip_iocb_rsp *ib_ip_rsp_ptr)
|
|
{
|
|
struct ql_rcv_buf_cb *lrg_buf_cb1 = NULL;
|
|
struct ql_rcv_buf_cb *lrg_buf_cb2 = NULL;
|
|
struct sk_buff *skb1 = NULL, *skb2;
|
|
struct net_device *ndev = qdev->ndev;
|
|
u16 length = le16_to_cpu(ib_ip_rsp_ptr->length);
|
|
u16 size = 0;
|
|
|
|
/*
|
|
* Get the inbound address list (small buffer).
|
|
*/
|
|
|
|
ql_get_sbuf(qdev);
|
|
|
|
if (qdev->device_id == QL3022_DEVICE_ID) {
|
|
/* start of first buffer on 3022 */
|
|
lrg_buf_cb1 = ql_get_lbuf(qdev);
|
|
skb1 = lrg_buf_cb1->skb;
|
|
size = ETH_HLEN;
|
|
if (*((u16 *) skb1->data) != 0xFFFF)
|
|
size += VLAN_ETH_HLEN - ETH_HLEN;
|
|
}
|
|
|
|
/* start of second buffer */
|
|
lrg_buf_cb2 = ql_get_lbuf(qdev);
|
|
skb2 = lrg_buf_cb2->skb;
|
|
|
|
skb_put(skb2, length); /* Just the second buffer length here. */
|
|
pci_unmap_single(qdev->pdev,
|
|
pci_unmap_addr(lrg_buf_cb2, mapaddr),
|
|
pci_unmap_len(lrg_buf_cb2, maplen),
|
|
PCI_DMA_FROMDEVICE);
|
|
prefetch(skb2->data);
|
|
|
|
skb2->ip_summed = CHECKSUM_NONE;
|
|
if (qdev->device_id == QL3022_DEVICE_ID) {
|
|
/*
|
|
* Copy the ethhdr from first buffer to second. This
|
|
* is necessary for 3022 IP completions.
|
|
*/
|
|
skb_copy_from_linear_data_offset(skb1, VLAN_ID_LEN,
|
|
skb_push(skb2, size), size);
|
|
} else {
|
|
u16 checksum = le16_to_cpu(ib_ip_rsp_ptr->checksum);
|
|
if (checksum &
|
|
(IB_IP_IOCB_RSP_3032_ICE |
|
|
IB_IP_IOCB_RSP_3032_CE)) {
|
|
printk(KERN_ERR
|
|
"%s: Bad checksum for this %s packet, checksum = %x.\n",
|
|
__func__,
|
|
((checksum &
|
|
IB_IP_IOCB_RSP_3032_TCP) ? "TCP" :
|
|
"UDP"),checksum);
|
|
} else if ((checksum & IB_IP_IOCB_RSP_3032_TCP) ||
|
|
(checksum & IB_IP_IOCB_RSP_3032_UDP &&
|
|
!(checksum & IB_IP_IOCB_RSP_3032_NUC))) {
|
|
skb2->ip_summed = CHECKSUM_UNNECESSARY;
|
|
}
|
|
}
|
|
skb2->protocol = eth_type_trans(skb2, qdev->ndev);
|
|
|
|
netif_receive_skb(skb2);
|
|
ndev->stats.rx_packets++;
|
|
ndev->stats.rx_bytes += length;
|
|
ndev->last_rx = jiffies;
|
|
lrg_buf_cb2->skb = NULL;
|
|
|
|
if (qdev->device_id == QL3022_DEVICE_ID)
|
|
ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb1);
|
|
ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb2);
|
|
}
|
|
|
|
static int ql_tx_rx_clean(struct ql3_adapter *qdev,
|
|
int *tx_cleaned, int *rx_cleaned, int work_to_do)
|
|
{
|
|
struct net_rsp_iocb *net_rsp;
|
|
struct net_device *ndev = qdev->ndev;
|
|
int work_done = 0;
|
|
|
|
/* While there are entries in the completion queue. */
|
|
while ((le32_to_cpu(*(qdev->prsp_producer_index)) !=
|
|
qdev->rsp_consumer_index) && (work_done < work_to_do)) {
|
|
|
|
net_rsp = qdev->rsp_current;
|
|
rmb();
|
|
/*
|
|
* Fix 4032 chipe undocumented "feature" where bit-8 is set if the
|
|
* inbound completion is for a VLAN.
|
|
*/
|
|
if (qdev->device_id == QL3032_DEVICE_ID)
|
|
net_rsp->opcode &= 0x7f;
|
|
switch (net_rsp->opcode) {
|
|
|
|
case OPCODE_OB_MAC_IOCB_FN0:
|
|
case OPCODE_OB_MAC_IOCB_FN2:
|
|
ql_process_mac_tx_intr(qdev, (struct ob_mac_iocb_rsp *)
|
|
net_rsp);
|
|
(*tx_cleaned)++;
|
|
break;
|
|
|
|
case OPCODE_IB_MAC_IOCB:
|
|
case OPCODE_IB_3032_MAC_IOCB:
|
|
ql_process_mac_rx_intr(qdev, (struct ib_mac_iocb_rsp *)
|
|
net_rsp);
|
|
(*rx_cleaned)++;
|
|
break;
|
|
|
|
case OPCODE_IB_IP_IOCB:
|
|
case OPCODE_IB_3032_IP_IOCB:
|
|
ql_process_macip_rx_intr(qdev, (struct ib_ip_iocb_rsp *)
|
|
net_rsp);
|
|
(*rx_cleaned)++;
|
|
break;
|
|
default:
|
|
{
|
|
u32 *tmp = (u32 *) net_rsp;
|
|
printk(KERN_ERR PFX
|
|
"%s: Hit default case, not "
|
|
"handled!\n"
|
|
" dropping the packet, opcode = "
|
|
"%x.\n",
|
|
ndev->name, net_rsp->opcode);
|
|
printk(KERN_ERR PFX
|
|
"0x%08lx 0x%08lx 0x%08lx 0x%08lx \n",
|
|
(unsigned long int)tmp[0],
|
|
(unsigned long int)tmp[1],
|
|
(unsigned long int)tmp[2],
|
|
(unsigned long int)tmp[3]);
|
|
}
|
|
}
|
|
|
|
qdev->rsp_consumer_index++;
|
|
|
|
if (qdev->rsp_consumer_index == NUM_RSP_Q_ENTRIES) {
|
|
qdev->rsp_consumer_index = 0;
|
|
qdev->rsp_current = qdev->rsp_q_virt_addr;
|
|
} else {
|
|
qdev->rsp_current++;
|
|
}
|
|
|
|
work_done = *tx_cleaned + *rx_cleaned;
|
|
}
|
|
|
|
return work_done;
|
|
}
|
|
|
|
static int ql_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct ql3_adapter *qdev = container_of(napi, struct ql3_adapter, napi);
|
|
struct net_device *ndev = qdev->ndev;
|
|
int rx_cleaned = 0, tx_cleaned = 0;
|
|
unsigned long hw_flags;
|
|
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
|
|
|
|
if (!netif_carrier_ok(ndev))
|
|
goto quit_polling;
|
|
|
|
ql_tx_rx_clean(qdev, &tx_cleaned, &rx_cleaned, budget);
|
|
|
|
if (tx_cleaned + rx_cleaned != budget ||
|
|
!netif_running(ndev)) {
|
|
quit_polling:
|
|
spin_lock_irqsave(&qdev->hw_lock, hw_flags);
|
|
__netif_rx_complete(ndev, napi);
|
|
ql_update_small_bufq_prod_index(qdev);
|
|
ql_update_lrg_bufq_prod_index(qdev);
|
|
writel(qdev->rsp_consumer_index,
|
|
&port_regs->CommonRegs.rspQConsumerIndex);
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
|
|
ql_enable_interrupts(qdev);
|
|
}
|
|
return tx_cleaned + rx_cleaned;
|
|
}
|
|
|
|
static irqreturn_t ql3xxx_isr(int irq, void *dev_id)
|
|
{
|
|
|
|
struct net_device *ndev = dev_id;
|
|
struct ql3_adapter *qdev = netdev_priv(ndev);
|
|
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
|
|
u32 value;
|
|
int handled = 1;
|
|
u32 var;
|
|
|
|
port_regs = qdev->mem_map_registers;
|
|
|
|
value =
|
|
ql_read_common_reg_l(qdev, &port_regs->CommonRegs.ispControlStatus);
|
|
|
|
if (value & (ISP_CONTROL_FE | ISP_CONTROL_RI)) {
|
|
spin_lock(&qdev->adapter_lock);
|
|
netif_stop_queue(qdev->ndev);
|
|
netif_carrier_off(qdev->ndev);
|
|
ql_disable_interrupts(qdev);
|
|
qdev->port_link_state = LS_DOWN;
|
|
set_bit(QL_RESET_ACTIVE,&qdev->flags) ;
|
|
|
|
if (value & ISP_CONTROL_FE) {
|
|
/*
|
|
* Chip Fatal Error.
|
|
*/
|
|
var =
|
|
ql_read_page0_reg_l(qdev,
|
|
&port_regs->PortFatalErrStatus);
|
|
printk(KERN_WARNING PFX
|
|
"%s: Resetting chip. PortFatalErrStatus "
|
|
"register = 0x%x\n", ndev->name, var);
|
|
set_bit(QL_RESET_START,&qdev->flags) ;
|
|
} else {
|
|
/*
|
|
* Soft Reset Requested.
|
|
*/
|
|
set_bit(QL_RESET_PER_SCSI,&qdev->flags) ;
|
|
printk(KERN_ERR PFX
|
|
"%s: Another function issued a reset to the "
|
|
"chip. ISR value = %x.\n", ndev->name, value);
|
|
}
|
|
queue_delayed_work(qdev->workqueue, &qdev->reset_work, 0);
|
|
spin_unlock(&qdev->adapter_lock);
|
|
} else if (value & ISP_IMR_DISABLE_CMPL_INT) {
|
|
ql_disable_interrupts(qdev);
|
|
if (likely(netif_rx_schedule_prep(ndev, &qdev->napi))) {
|
|
__netif_rx_schedule(ndev, &qdev->napi);
|
|
}
|
|
} else {
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
/*
|
|
* Get the total number of segments needed for the
|
|
* given number of fragments. This is necessary because
|
|
* outbound address lists (OAL) will be used when more than
|
|
* two frags are given. Each address list has 5 addr/len
|
|
* pairs. The 5th pair in each AOL is used to point to
|
|
* the next AOL if more frags are coming.
|
|
* That is why the frags:segment count ratio is not linear.
|
|
*/
|
|
static int ql_get_seg_count(struct ql3_adapter *qdev,
|
|
unsigned short frags)
|
|
{
|
|
if (qdev->device_id == QL3022_DEVICE_ID)
|
|
return 1;
|
|
|
|
switch(frags) {
|
|
case 0: return 1; /* just the skb->data seg */
|
|
case 1: return 2; /* skb->data + 1 frag */
|
|
case 2: return 3; /* skb->data + 2 frags */
|
|
case 3: return 5; /* skb->data + 1 frag + 1 AOL containting 2 frags */
|
|
case 4: return 6;
|
|
case 5: return 7;
|
|
case 6: return 8;
|
|
case 7: return 10;
|
|
case 8: return 11;
|
|
case 9: return 12;
|
|
case 10: return 13;
|
|
case 11: return 15;
|
|
case 12: return 16;
|
|
case 13: return 17;
|
|
case 14: return 18;
|
|
case 15: return 20;
|
|
case 16: return 21;
|
|
case 17: return 22;
|
|
case 18: return 23;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static void ql_hw_csum_setup(const struct sk_buff *skb,
|
|
struct ob_mac_iocb_req *mac_iocb_ptr)
|
|
{
|
|
const struct iphdr *ip = ip_hdr(skb);
|
|
|
|
mac_iocb_ptr->ip_hdr_off = skb_network_offset(skb);
|
|
mac_iocb_ptr->ip_hdr_len = ip->ihl;
|
|
|
|
if (ip->protocol == IPPROTO_TCP) {
|
|
mac_iocb_ptr->flags1 |= OB_3032MAC_IOCB_REQ_TC |
|
|
OB_3032MAC_IOCB_REQ_IC;
|
|
} else {
|
|
mac_iocb_ptr->flags1 |= OB_3032MAC_IOCB_REQ_UC |
|
|
OB_3032MAC_IOCB_REQ_IC;
|
|
}
|
|
|
|
}
|
|
|
|
/*
|
|
* Map the buffers for this transmit. This will return
|
|
* NETDEV_TX_BUSY or NETDEV_TX_OK based on success.
|
|
*/
|
|
static int ql_send_map(struct ql3_adapter *qdev,
|
|
struct ob_mac_iocb_req *mac_iocb_ptr,
|
|
struct ql_tx_buf_cb *tx_cb,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct oal *oal;
|
|
struct oal_entry *oal_entry;
|
|
int len = skb_headlen(skb);
|
|
dma_addr_t map;
|
|
int err;
|
|
int completed_segs, i;
|
|
int seg_cnt, seg = 0;
|
|
int frag_cnt = (int)skb_shinfo(skb)->nr_frags;
|
|
|
|
seg_cnt = tx_cb->seg_count;
|
|
/*
|
|
* Map the skb buffer first.
|
|
*/
|
|
map = pci_map_single(qdev->pdev, skb->data, len, PCI_DMA_TODEVICE);
|
|
|
|
err = pci_dma_mapping_error(map);
|
|
if(err) {
|
|
printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
|
|
qdev->ndev->name, err);
|
|
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
oal_entry = (struct oal_entry *)&mac_iocb_ptr->buf_addr0_low;
|
|
oal_entry->dma_lo = cpu_to_le32(LS_64BITS(map));
|
|
oal_entry->dma_hi = cpu_to_le32(MS_64BITS(map));
|
|
oal_entry->len = cpu_to_le32(len);
|
|
pci_unmap_addr_set(&tx_cb->map[seg], mapaddr, map);
|
|
pci_unmap_len_set(&tx_cb->map[seg], maplen, len);
|
|
seg++;
|
|
|
|
if (seg_cnt == 1) {
|
|
/* Terminate the last segment. */
|
|
oal_entry->len =
|
|
cpu_to_le32(le32_to_cpu(oal_entry->len) | OAL_LAST_ENTRY);
|
|
} else {
|
|
oal = tx_cb->oal;
|
|
for (completed_segs=0; completed_segs<frag_cnt; completed_segs++,seg++) {
|
|
skb_frag_t *frag = &skb_shinfo(skb)->frags[completed_segs];
|
|
oal_entry++;
|
|
if ((seg == 2 && seg_cnt > 3) || /* Check for continuation */
|
|
(seg == 7 && seg_cnt > 8) || /* requirements. It's strange */
|
|
(seg == 12 && seg_cnt > 13) || /* but necessary. */
|
|
(seg == 17 && seg_cnt > 18)) {
|
|
/* Continuation entry points to outbound address list. */
|
|
map = pci_map_single(qdev->pdev, oal,
|
|
sizeof(struct oal),
|
|
PCI_DMA_TODEVICE);
|
|
|
|
err = pci_dma_mapping_error(map);
|
|
if(err) {
|
|
|
|
printk(KERN_ERR "%s: PCI mapping outbound address list with error: %d\n",
|
|
qdev->ndev->name, err);
|
|
goto map_error;
|
|
}
|
|
|
|
oal_entry->dma_lo = cpu_to_le32(LS_64BITS(map));
|
|
oal_entry->dma_hi = cpu_to_le32(MS_64BITS(map));
|
|
oal_entry->len =
|
|
cpu_to_le32(sizeof(struct oal) |
|
|
OAL_CONT_ENTRY);
|
|
pci_unmap_addr_set(&tx_cb->map[seg], mapaddr,
|
|
map);
|
|
pci_unmap_len_set(&tx_cb->map[seg], maplen,
|
|
sizeof(struct oal));
|
|
oal_entry = (struct oal_entry *)oal;
|
|
oal++;
|
|
seg++;
|
|
}
|
|
|
|
map =
|
|
pci_map_page(qdev->pdev, frag->page,
|
|
frag->page_offset, frag->size,
|
|
PCI_DMA_TODEVICE);
|
|
|
|
err = pci_dma_mapping_error(map);
|
|
if(err) {
|
|
printk(KERN_ERR "%s: PCI mapping frags failed with error: %d\n",
|
|
qdev->ndev->name, err);
|
|
goto map_error;
|
|
}
|
|
|
|
oal_entry->dma_lo = cpu_to_le32(LS_64BITS(map));
|
|
oal_entry->dma_hi = cpu_to_le32(MS_64BITS(map));
|
|
oal_entry->len = cpu_to_le32(frag->size);
|
|
pci_unmap_addr_set(&tx_cb->map[seg], mapaddr, map);
|
|
pci_unmap_len_set(&tx_cb->map[seg], maplen,
|
|
frag->size);
|
|
}
|
|
/* Terminate the last segment. */
|
|
oal_entry->len =
|
|
cpu_to_le32(le32_to_cpu(oal_entry->len) | OAL_LAST_ENTRY);
|
|
}
|
|
|
|
return NETDEV_TX_OK;
|
|
|
|
map_error:
|
|
/* A PCI mapping failed and now we will need to back out
|
|
* We need to traverse through the oal's and associated pages which
|
|
* have been mapped and now we must unmap them to clean up properly
|
|
*/
|
|
|
|
seg = 1;
|
|
oal_entry = (struct oal_entry *)&mac_iocb_ptr->buf_addr0_low;
|
|
oal = tx_cb->oal;
|
|
for (i=0; i<completed_segs; i++,seg++) {
|
|
oal_entry++;
|
|
|
|
if((seg == 2 && seg_cnt > 3) || /* Check for continuation */
|
|
(seg == 7 && seg_cnt > 8) || /* requirements. It's strange */
|
|
(seg == 12 && seg_cnt > 13) || /* but necessary. */
|
|
(seg == 17 && seg_cnt > 18)) {
|
|
pci_unmap_single(qdev->pdev,
|
|
pci_unmap_addr(&tx_cb->map[seg], mapaddr),
|
|
pci_unmap_len(&tx_cb->map[seg], maplen),
|
|
PCI_DMA_TODEVICE);
|
|
oal++;
|
|
seg++;
|
|
}
|
|
|
|
pci_unmap_page(qdev->pdev,
|
|
pci_unmap_addr(&tx_cb->map[seg], mapaddr),
|
|
pci_unmap_len(&tx_cb->map[seg], maplen),
|
|
PCI_DMA_TODEVICE);
|
|
}
|
|
|
|
pci_unmap_single(qdev->pdev,
|
|
pci_unmap_addr(&tx_cb->map[0], mapaddr),
|
|
pci_unmap_addr(&tx_cb->map[0], maplen),
|
|
PCI_DMA_TODEVICE);
|
|
|
|
return NETDEV_TX_BUSY;
|
|
|
|
}
|
|
|
|
/*
|
|
* The difference between 3022 and 3032 sends:
|
|
* 3022 only supports a simple single segment transmission.
|
|
* 3032 supports checksumming and scatter/gather lists (fragments).
|
|
* The 3032 supports sglists by using the 3 addr/len pairs (ALP)
|
|
* in the IOCB plus a chain of outbound address lists (OAL) that
|
|
* each contain 5 ALPs. The last ALP of the IOCB (3rd) or OAL (5th)
|
|
* will used to point to an OAL when more ALP entries are required.
|
|
* The IOCB is always the top of the chain followed by one or more
|
|
* OALs (when necessary).
|
|
*/
|
|
static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
|
|
{
|
|
struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
|
|
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
|
|
struct ql_tx_buf_cb *tx_cb;
|
|
u32 tot_len = skb->len;
|
|
struct ob_mac_iocb_req *mac_iocb_ptr;
|
|
|
|
if (unlikely(atomic_read(&qdev->tx_count) < 2)) {
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
tx_cb = &qdev->tx_buf[qdev->req_producer_index] ;
|
|
if((tx_cb->seg_count = ql_get_seg_count(qdev,
|
|
(skb_shinfo(skb)->nr_frags))) == -1) {
|
|
printk(KERN_ERR PFX"%s: invalid segment count!\n",__func__);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
mac_iocb_ptr = tx_cb->queue_entry;
|
|
memset((void *)mac_iocb_ptr, 0, sizeof(struct ob_mac_iocb_req));
|
|
mac_iocb_ptr->opcode = qdev->mac_ob_opcode;
|
|
mac_iocb_ptr->flags = OB_MAC_IOCB_REQ_X;
|
|
mac_iocb_ptr->flags |= qdev->mb_bit_mask;
|
|
mac_iocb_ptr->transaction_id = qdev->req_producer_index;
|
|
mac_iocb_ptr->data_len = cpu_to_le16((u16) tot_len);
|
|
tx_cb->skb = skb;
|
|
if (qdev->device_id == QL3032_DEVICE_ID &&
|
|
skb->ip_summed == CHECKSUM_PARTIAL)
|
|
ql_hw_csum_setup(skb, mac_iocb_ptr);
|
|
|
|
if(ql_send_map(qdev,mac_iocb_ptr,tx_cb,skb) != NETDEV_TX_OK) {
|
|
printk(KERN_ERR PFX"%s: Could not map the segments!\n",__func__);
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
wmb();
|
|
qdev->req_producer_index++;
|
|
if (qdev->req_producer_index == NUM_REQ_Q_ENTRIES)
|
|
qdev->req_producer_index = 0;
|
|
wmb();
|
|
ql_write_common_reg_l(qdev,
|
|
&port_regs->CommonRegs.reqQProducerIndex,
|
|
qdev->req_producer_index);
|
|
|
|
ndev->trans_start = jiffies;
|
|
if (netif_msg_tx_queued(qdev))
|
|
printk(KERN_DEBUG PFX "%s: tx queued, slot %d, len %d\n",
|
|
ndev->name, qdev->req_producer_index, skb->len);
|
|
|
|
atomic_dec(&qdev->tx_count);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static int ql_alloc_net_req_rsp_queues(struct ql3_adapter *qdev)
|
|
{
|
|
qdev->req_q_size =
|
|
(u32) (NUM_REQ_Q_ENTRIES * sizeof(struct ob_mac_iocb_req));
|
|
|
|
qdev->req_q_virt_addr =
|
|
pci_alloc_consistent(qdev->pdev,
|
|
(size_t) qdev->req_q_size,
|
|
&qdev->req_q_phy_addr);
|
|
|
|
if ((qdev->req_q_virt_addr == NULL) ||
|
|
LS_64BITS(qdev->req_q_phy_addr) & (qdev->req_q_size - 1)) {
|
|
printk(KERN_ERR PFX "%s: reqQ failed.\n",
|
|
qdev->ndev->name);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
qdev->rsp_q_size = NUM_RSP_Q_ENTRIES * sizeof(struct net_rsp_iocb);
|
|
|
|
qdev->rsp_q_virt_addr =
|
|
pci_alloc_consistent(qdev->pdev,
|
|
(size_t) qdev->rsp_q_size,
|
|
&qdev->rsp_q_phy_addr);
|
|
|
|
if ((qdev->rsp_q_virt_addr == NULL) ||
|
|
LS_64BITS(qdev->rsp_q_phy_addr) & (qdev->rsp_q_size - 1)) {
|
|
printk(KERN_ERR PFX
|
|
"%s: rspQ allocation failed\n",
|
|
qdev->ndev->name);
|
|
pci_free_consistent(qdev->pdev, (size_t) qdev->req_q_size,
|
|
qdev->req_q_virt_addr,
|
|
qdev->req_q_phy_addr);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
set_bit(QL_ALLOC_REQ_RSP_Q_DONE,&qdev->flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ql_free_net_req_rsp_queues(struct ql3_adapter *qdev)
|
|
{
|
|
if (!test_bit(QL_ALLOC_REQ_RSP_Q_DONE,&qdev->flags)) {
|
|
printk(KERN_INFO PFX
|
|
"%s: Already done.\n", qdev->ndev->name);
|
|
return;
|
|
}
|
|
|
|
pci_free_consistent(qdev->pdev,
|
|
qdev->req_q_size,
|
|
qdev->req_q_virt_addr, qdev->req_q_phy_addr);
|
|
|
|
qdev->req_q_virt_addr = NULL;
|
|
|
|
pci_free_consistent(qdev->pdev,
|
|
qdev->rsp_q_size,
|
|
qdev->rsp_q_virt_addr, qdev->rsp_q_phy_addr);
|
|
|
|
qdev->rsp_q_virt_addr = NULL;
|
|
|
|
clear_bit(QL_ALLOC_REQ_RSP_Q_DONE,&qdev->flags);
|
|
}
|
|
|
|
static int ql_alloc_buffer_queues(struct ql3_adapter *qdev)
|
|
{
|
|
/* Create Large Buffer Queue */
|
|
qdev->lrg_buf_q_size =
|
|
qdev->num_lbufq_entries * sizeof(struct lrg_buf_q_entry);
|
|
if (qdev->lrg_buf_q_size < PAGE_SIZE)
|
|
qdev->lrg_buf_q_alloc_size = PAGE_SIZE;
|
|
else
|
|
qdev->lrg_buf_q_alloc_size = qdev->lrg_buf_q_size * 2;
|
|
|
|
qdev->lrg_buf = kmalloc(qdev->num_large_buffers * sizeof(struct ql_rcv_buf_cb),GFP_KERNEL);
|
|
if (qdev->lrg_buf == NULL) {
|
|
printk(KERN_ERR PFX
|
|
"%s: qdev->lrg_buf alloc failed.\n", qdev->ndev->name);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
qdev->lrg_buf_q_alloc_virt_addr =
|
|
pci_alloc_consistent(qdev->pdev,
|
|
qdev->lrg_buf_q_alloc_size,
|
|
&qdev->lrg_buf_q_alloc_phy_addr);
|
|
|
|
if (qdev->lrg_buf_q_alloc_virt_addr == NULL) {
|
|
printk(KERN_ERR PFX
|
|
"%s: lBufQ failed\n", qdev->ndev->name);
|
|
return -ENOMEM;
|
|
}
|
|
qdev->lrg_buf_q_virt_addr = qdev->lrg_buf_q_alloc_virt_addr;
|
|
qdev->lrg_buf_q_phy_addr = qdev->lrg_buf_q_alloc_phy_addr;
|
|
|
|
/* Create Small Buffer Queue */
|
|
qdev->small_buf_q_size =
|
|
NUM_SBUFQ_ENTRIES * sizeof(struct lrg_buf_q_entry);
|
|
if (qdev->small_buf_q_size < PAGE_SIZE)
|
|
qdev->small_buf_q_alloc_size = PAGE_SIZE;
|
|
else
|
|
qdev->small_buf_q_alloc_size = qdev->small_buf_q_size * 2;
|
|
|
|
qdev->small_buf_q_alloc_virt_addr =
|
|
pci_alloc_consistent(qdev->pdev,
|
|
qdev->small_buf_q_alloc_size,
|
|
&qdev->small_buf_q_alloc_phy_addr);
|
|
|
|
if (qdev->small_buf_q_alloc_virt_addr == NULL) {
|
|
printk(KERN_ERR PFX
|
|
"%s: Small Buffer Queue allocation failed.\n",
|
|
qdev->ndev->name);
|
|
pci_free_consistent(qdev->pdev, qdev->lrg_buf_q_alloc_size,
|
|
qdev->lrg_buf_q_alloc_virt_addr,
|
|
qdev->lrg_buf_q_alloc_phy_addr);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
qdev->small_buf_q_virt_addr = qdev->small_buf_q_alloc_virt_addr;
|
|
qdev->small_buf_q_phy_addr = qdev->small_buf_q_alloc_phy_addr;
|
|
set_bit(QL_ALLOC_BUFQS_DONE,&qdev->flags);
|
|
return 0;
|
|
}
|
|
|
|
static void ql_free_buffer_queues(struct ql3_adapter *qdev)
|
|
{
|
|
if (!test_bit(QL_ALLOC_BUFQS_DONE,&qdev->flags)) {
|
|
printk(KERN_INFO PFX
|
|
"%s: Already done.\n", qdev->ndev->name);
|
|
return;
|
|
}
|
|
if(qdev->lrg_buf) kfree(qdev->lrg_buf);
|
|
pci_free_consistent(qdev->pdev,
|
|
qdev->lrg_buf_q_alloc_size,
|
|
qdev->lrg_buf_q_alloc_virt_addr,
|
|
qdev->lrg_buf_q_alloc_phy_addr);
|
|
|
|
qdev->lrg_buf_q_virt_addr = NULL;
|
|
|
|
pci_free_consistent(qdev->pdev,
|
|
qdev->small_buf_q_alloc_size,
|
|
qdev->small_buf_q_alloc_virt_addr,
|
|
qdev->small_buf_q_alloc_phy_addr);
|
|
|
|
qdev->small_buf_q_virt_addr = NULL;
|
|
|
|
clear_bit(QL_ALLOC_BUFQS_DONE,&qdev->flags);
|
|
}
|
|
|
|
static int ql_alloc_small_buffers(struct ql3_adapter *qdev)
|
|
{
|
|
int i;
|
|
struct bufq_addr_element *small_buf_q_entry;
|
|
|
|
/* Currently we allocate on one of memory and use it for smallbuffers */
|
|
qdev->small_buf_total_size =
|
|
(QL_ADDR_ELE_PER_BUFQ_ENTRY * NUM_SBUFQ_ENTRIES *
|
|
QL_SMALL_BUFFER_SIZE);
|
|
|
|
qdev->small_buf_virt_addr =
|
|
pci_alloc_consistent(qdev->pdev,
|
|
qdev->small_buf_total_size,
|
|
&qdev->small_buf_phy_addr);
|
|
|
|
if (qdev->small_buf_virt_addr == NULL) {
|
|
printk(KERN_ERR PFX
|
|
"%s: Failed to get small buffer memory.\n",
|
|
qdev->ndev->name);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
qdev->small_buf_phy_addr_low = LS_64BITS(qdev->small_buf_phy_addr);
|
|
qdev->small_buf_phy_addr_high = MS_64BITS(qdev->small_buf_phy_addr);
|
|
|
|
small_buf_q_entry = qdev->small_buf_q_virt_addr;
|
|
|
|
/* Initialize the small buffer queue. */
|
|
for (i = 0; i < (QL_ADDR_ELE_PER_BUFQ_ENTRY * NUM_SBUFQ_ENTRIES); i++) {
|
|
small_buf_q_entry->addr_high =
|
|
cpu_to_le32(qdev->small_buf_phy_addr_high);
|
|
small_buf_q_entry->addr_low =
|
|
cpu_to_le32(qdev->small_buf_phy_addr_low +
|
|
(i * QL_SMALL_BUFFER_SIZE));
|
|
small_buf_q_entry++;
|
|
}
|
|
qdev->small_buf_index = 0;
|
|
set_bit(QL_ALLOC_SMALL_BUF_DONE,&qdev->flags);
|
|
return 0;
|
|
}
|
|
|
|
static void ql_free_small_buffers(struct ql3_adapter *qdev)
|
|
{
|
|
if (!test_bit(QL_ALLOC_SMALL_BUF_DONE,&qdev->flags)) {
|
|
printk(KERN_INFO PFX
|
|
"%s: Already done.\n", qdev->ndev->name);
|
|
return;
|
|
}
|
|
if (qdev->small_buf_virt_addr != NULL) {
|
|
pci_free_consistent(qdev->pdev,
|
|
qdev->small_buf_total_size,
|
|
qdev->small_buf_virt_addr,
|
|
qdev->small_buf_phy_addr);
|
|
|
|
qdev->small_buf_virt_addr = NULL;
|
|
}
|
|
}
|
|
|
|
static void ql_free_large_buffers(struct ql3_adapter *qdev)
|
|
{
|
|
int i = 0;
|
|
struct ql_rcv_buf_cb *lrg_buf_cb;
|
|
|
|
for (i = 0; i < qdev->num_large_buffers; i++) {
|
|
lrg_buf_cb = &qdev->lrg_buf[i];
|
|
if (lrg_buf_cb->skb) {
|
|
dev_kfree_skb(lrg_buf_cb->skb);
|
|
pci_unmap_single(qdev->pdev,
|
|
pci_unmap_addr(lrg_buf_cb, mapaddr),
|
|
pci_unmap_len(lrg_buf_cb, maplen),
|
|
PCI_DMA_FROMDEVICE);
|
|
memset(lrg_buf_cb, 0, sizeof(struct ql_rcv_buf_cb));
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ql_init_large_buffers(struct ql3_adapter *qdev)
|
|
{
|
|
int i;
|
|
struct ql_rcv_buf_cb *lrg_buf_cb;
|
|
struct bufq_addr_element *buf_addr_ele = qdev->lrg_buf_q_virt_addr;
|
|
|
|
for (i = 0; i < qdev->num_large_buffers; i++) {
|
|
lrg_buf_cb = &qdev->lrg_buf[i];
|
|
buf_addr_ele->addr_high = lrg_buf_cb->buf_phy_addr_high;
|
|
buf_addr_ele->addr_low = lrg_buf_cb->buf_phy_addr_low;
|
|
buf_addr_ele++;
|
|
}
|
|
qdev->lrg_buf_index = 0;
|
|
qdev->lrg_buf_skb_check = 0;
|
|
}
|
|
|
|
static int ql_alloc_large_buffers(struct ql3_adapter *qdev)
|
|
{
|
|
int i;
|
|
struct ql_rcv_buf_cb *lrg_buf_cb;
|
|
struct sk_buff *skb;
|
|
dma_addr_t map;
|
|
int err;
|
|
|
|
for (i = 0; i < qdev->num_large_buffers; i++) {
|
|
skb = netdev_alloc_skb(qdev->ndev,
|
|
qdev->lrg_buffer_len);
|
|
if (unlikely(!skb)) {
|
|
/* Better luck next round */
|
|
printk(KERN_ERR PFX
|
|
"%s: large buff alloc failed, "
|
|
"for %d bytes at index %d.\n",
|
|
qdev->ndev->name,
|
|
qdev->lrg_buffer_len * 2, i);
|
|
ql_free_large_buffers(qdev);
|
|
return -ENOMEM;
|
|
} else {
|
|
|
|
lrg_buf_cb = &qdev->lrg_buf[i];
|
|
memset(lrg_buf_cb, 0, sizeof(struct ql_rcv_buf_cb));
|
|
lrg_buf_cb->index = i;
|
|
lrg_buf_cb->skb = skb;
|
|
/*
|
|
* We save some space to copy the ethhdr from first
|
|
* buffer
|
|
*/
|
|
skb_reserve(skb, QL_HEADER_SPACE);
|
|
map = pci_map_single(qdev->pdev,
|
|
skb->data,
|
|
qdev->lrg_buffer_len -
|
|
QL_HEADER_SPACE,
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
err = pci_dma_mapping_error(map);
|
|
if(err) {
|
|
printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
|
|
qdev->ndev->name, err);
|
|
ql_free_large_buffers(qdev);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pci_unmap_addr_set(lrg_buf_cb, mapaddr, map);
|
|
pci_unmap_len_set(lrg_buf_cb, maplen,
|
|
qdev->lrg_buffer_len -
|
|
QL_HEADER_SPACE);
|
|
lrg_buf_cb->buf_phy_addr_low =
|
|
cpu_to_le32(LS_64BITS(map));
|
|
lrg_buf_cb->buf_phy_addr_high =
|
|
cpu_to_le32(MS_64BITS(map));
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void ql_free_send_free_list(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql_tx_buf_cb *tx_cb;
|
|
int i;
|
|
|
|
tx_cb = &qdev->tx_buf[0];
|
|
for (i = 0; i < NUM_REQ_Q_ENTRIES; i++) {
|
|
if (tx_cb->oal) {
|
|
kfree(tx_cb->oal);
|
|
tx_cb->oal = NULL;
|
|
}
|
|
tx_cb++;
|
|
}
|
|
}
|
|
|
|
static int ql_create_send_free_list(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql_tx_buf_cb *tx_cb;
|
|
int i;
|
|
struct ob_mac_iocb_req *req_q_curr =
|
|
qdev->req_q_virt_addr;
|
|
|
|
/* Create free list of transmit buffers */
|
|
for (i = 0; i < NUM_REQ_Q_ENTRIES; i++) {
|
|
|
|
tx_cb = &qdev->tx_buf[i];
|
|
tx_cb->skb = NULL;
|
|
tx_cb->queue_entry = req_q_curr;
|
|
req_q_curr++;
|
|
tx_cb->oal = kmalloc(512, GFP_KERNEL);
|
|
if (tx_cb->oal == NULL)
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int ql_alloc_mem_resources(struct ql3_adapter *qdev)
|
|
{
|
|
if (qdev->ndev->mtu == NORMAL_MTU_SIZE) {
|
|
qdev->num_lbufq_entries = NUM_LBUFQ_ENTRIES;
|
|
qdev->lrg_buffer_len = NORMAL_MTU_SIZE;
|
|
}
|
|
else if (qdev->ndev->mtu == JUMBO_MTU_SIZE) {
|
|
/*
|
|
* Bigger buffers, so less of them.
|
|
*/
|
|
qdev->num_lbufq_entries = JUMBO_NUM_LBUFQ_ENTRIES;
|
|
qdev->lrg_buffer_len = JUMBO_MTU_SIZE;
|
|
} else {
|
|
printk(KERN_ERR PFX
|
|
"%s: Invalid mtu size. Only 1500 and 9000 are accepted.\n",
|
|
qdev->ndev->name);
|
|
return -ENOMEM;
|
|
}
|
|
qdev->num_large_buffers = qdev->num_lbufq_entries * QL_ADDR_ELE_PER_BUFQ_ENTRY;
|
|
qdev->lrg_buffer_len += VLAN_ETH_HLEN + VLAN_ID_LEN + QL_HEADER_SPACE;
|
|
qdev->max_frame_size =
|
|
(qdev->lrg_buffer_len - QL_HEADER_SPACE) + ETHERNET_CRC_SIZE;
|
|
|
|
/*
|
|
* First allocate a page of shared memory and use it for shadow
|
|
* locations of Network Request Queue Consumer Address Register and
|
|
* Network Completion Queue Producer Index Register
|
|
*/
|
|
qdev->shadow_reg_virt_addr =
|
|
pci_alloc_consistent(qdev->pdev,
|
|
PAGE_SIZE, &qdev->shadow_reg_phy_addr);
|
|
|
|
if (qdev->shadow_reg_virt_addr != NULL) {
|
|
qdev->preq_consumer_index = (u16 *) qdev->shadow_reg_virt_addr;
|
|
qdev->req_consumer_index_phy_addr_high =
|
|
MS_64BITS(qdev->shadow_reg_phy_addr);
|
|
qdev->req_consumer_index_phy_addr_low =
|
|
LS_64BITS(qdev->shadow_reg_phy_addr);
|
|
|
|
qdev->prsp_producer_index =
|
|
(u32 *) (((u8 *) qdev->preq_consumer_index) + 8);
|
|
qdev->rsp_producer_index_phy_addr_high =
|
|
qdev->req_consumer_index_phy_addr_high;
|
|
qdev->rsp_producer_index_phy_addr_low =
|
|
qdev->req_consumer_index_phy_addr_low + 8;
|
|
} else {
|
|
printk(KERN_ERR PFX
|
|
"%s: shadowReg Alloc failed.\n", qdev->ndev->name);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (ql_alloc_net_req_rsp_queues(qdev) != 0) {
|
|
printk(KERN_ERR PFX
|
|
"%s: ql_alloc_net_req_rsp_queues failed.\n",
|
|
qdev->ndev->name);
|
|
goto err_req_rsp;
|
|
}
|
|
|
|
if (ql_alloc_buffer_queues(qdev) != 0) {
|
|
printk(KERN_ERR PFX
|
|
"%s: ql_alloc_buffer_queues failed.\n",
|
|
qdev->ndev->name);
|
|
goto err_buffer_queues;
|
|
}
|
|
|
|
if (ql_alloc_small_buffers(qdev) != 0) {
|
|
printk(KERN_ERR PFX
|
|
"%s: ql_alloc_small_buffers failed\n", qdev->ndev->name);
|
|
goto err_small_buffers;
|
|
}
|
|
|
|
if (ql_alloc_large_buffers(qdev) != 0) {
|
|
printk(KERN_ERR PFX
|
|
"%s: ql_alloc_large_buffers failed\n", qdev->ndev->name);
|
|
goto err_small_buffers;
|
|
}
|
|
|
|
/* Initialize the large buffer queue. */
|
|
ql_init_large_buffers(qdev);
|
|
if (ql_create_send_free_list(qdev))
|
|
goto err_free_list;
|
|
|
|
qdev->rsp_current = qdev->rsp_q_virt_addr;
|
|
|
|
return 0;
|
|
err_free_list:
|
|
ql_free_send_free_list(qdev);
|
|
err_small_buffers:
|
|
ql_free_buffer_queues(qdev);
|
|
err_buffer_queues:
|
|
ql_free_net_req_rsp_queues(qdev);
|
|
err_req_rsp:
|
|
pci_free_consistent(qdev->pdev,
|
|
PAGE_SIZE,
|
|
qdev->shadow_reg_virt_addr,
|
|
qdev->shadow_reg_phy_addr);
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void ql_free_mem_resources(struct ql3_adapter *qdev)
|
|
{
|
|
ql_free_send_free_list(qdev);
|
|
ql_free_large_buffers(qdev);
|
|
ql_free_small_buffers(qdev);
|
|
ql_free_buffer_queues(qdev);
|
|
ql_free_net_req_rsp_queues(qdev);
|
|
if (qdev->shadow_reg_virt_addr != NULL) {
|
|
pci_free_consistent(qdev->pdev,
|
|
PAGE_SIZE,
|
|
qdev->shadow_reg_virt_addr,
|
|
qdev->shadow_reg_phy_addr);
|
|
qdev->shadow_reg_virt_addr = NULL;
|
|
}
|
|
}
|
|
|
|
static int ql_init_misc_registers(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_local_ram_registers __iomem *local_ram =
|
|
(void __iomem *)qdev->mem_map_registers;
|
|
|
|
if(ql_sem_spinlock(qdev, QL_DDR_RAM_SEM_MASK,
|
|
(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
|
|
2) << 4))
|
|
return -1;
|
|
|
|
ql_write_page2_reg(qdev,
|
|
&local_ram->bufletSize, qdev->nvram_data.bufletSize);
|
|
|
|
ql_write_page2_reg(qdev,
|
|
&local_ram->maxBufletCount,
|
|
qdev->nvram_data.bufletCount);
|
|
|
|
ql_write_page2_reg(qdev,
|
|
&local_ram->freeBufletThresholdLow,
|
|
(qdev->nvram_data.tcpWindowThreshold25 << 16) |
|
|
(qdev->nvram_data.tcpWindowThreshold0));
|
|
|
|
ql_write_page2_reg(qdev,
|
|
&local_ram->freeBufletThresholdHigh,
|
|
qdev->nvram_data.tcpWindowThreshold50);
|
|
|
|
ql_write_page2_reg(qdev,
|
|
&local_ram->ipHashTableBase,
|
|
(qdev->nvram_data.ipHashTableBaseHi << 16) |
|
|
qdev->nvram_data.ipHashTableBaseLo);
|
|
ql_write_page2_reg(qdev,
|
|
&local_ram->ipHashTableCount,
|
|
qdev->nvram_data.ipHashTableSize);
|
|
ql_write_page2_reg(qdev,
|
|
&local_ram->tcpHashTableBase,
|
|
(qdev->nvram_data.tcpHashTableBaseHi << 16) |
|
|
qdev->nvram_data.tcpHashTableBaseLo);
|
|
ql_write_page2_reg(qdev,
|
|
&local_ram->tcpHashTableCount,
|
|
qdev->nvram_data.tcpHashTableSize);
|
|
ql_write_page2_reg(qdev,
|
|
&local_ram->ncbBase,
|
|
(qdev->nvram_data.ncbTableBaseHi << 16) |
|
|
qdev->nvram_data.ncbTableBaseLo);
|
|
ql_write_page2_reg(qdev,
|
|
&local_ram->maxNcbCount,
|
|
qdev->nvram_data.ncbTableSize);
|
|
ql_write_page2_reg(qdev,
|
|
&local_ram->drbBase,
|
|
(qdev->nvram_data.drbTableBaseHi << 16) |
|
|
qdev->nvram_data.drbTableBaseLo);
|
|
ql_write_page2_reg(qdev,
|
|
&local_ram->maxDrbCount,
|
|
qdev->nvram_data.drbTableSize);
|
|
ql_sem_unlock(qdev, QL_DDR_RAM_SEM_MASK);
|
|
return 0;
|
|
}
|
|
|
|
static int ql_adapter_initialize(struct ql3_adapter *qdev)
|
|
{
|
|
u32 value;
|
|
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
|
|
struct ql3xxx_host_memory_registers __iomem *hmem_regs =
|
|
(void __iomem *)port_regs;
|
|
u32 delay = 10;
|
|
int status = 0;
|
|
|
|
if(ql_mii_setup(qdev))
|
|
return -1;
|
|
|
|
/* Bring out PHY out of reset */
|
|
ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
|
|
(ISP_SERIAL_PORT_IF_WE |
|
|
(ISP_SERIAL_PORT_IF_WE << 16)));
|
|
|
|
qdev->port_link_state = LS_DOWN;
|
|
netif_carrier_off(qdev->ndev);
|
|
|
|
/* V2 chip fix for ARS-39168. */
|
|
ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
|
|
(ISP_SERIAL_PORT_IF_SDE |
|
|
(ISP_SERIAL_PORT_IF_SDE << 16)));
|
|
|
|
/* Request Queue Registers */
|
|
*((u32 *) (qdev->preq_consumer_index)) = 0;
|
|
atomic_set(&qdev->tx_count,NUM_REQ_Q_ENTRIES);
|
|
qdev->req_producer_index = 0;
|
|
|
|
ql_write_page1_reg(qdev,
|
|
&hmem_regs->reqConsumerIndexAddrHigh,
|
|
qdev->req_consumer_index_phy_addr_high);
|
|
ql_write_page1_reg(qdev,
|
|
&hmem_regs->reqConsumerIndexAddrLow,
|
|
qdev->req_consumer_index_phy_addr_low);
|
|
|
|
ql_write_page1_reg(qdev,
|
|
&hmem_regs->reqBaseAddrHigh,
|
|
MS_64BITS(qdev->req_q_phy_addr));
|
|
ql_write_page1_reg(qdev,
|
|
&hmem_regs->reqBaseAddrLow,
|
|
LS_64BITS(qdev->req_q_phy_addr));
|
|
ql_write_page1_reg(qdev, &hmem_regs->reqLength, NUM_REQ_Q_ENTRIES);
|
|
|
|
/* Response Queue Registers */
|
|
*((u16 *) (qdev->prsp_producer_index)) = 0;
|
|
qdev->rsp_consumer_index = 0;
|
|
qdev->rsp_current = qdev->rsp_q_virt_addr;
|
|
|
|
ql_write_page1_reg(qdev,
|
|
&hmem_regs->rspProducerIndexAddrHigh,
|
|
qdev->rsp_producer_index_phy_addr_high);
|
|
|
|
ql_write_page1_reg(qdev,
|
|
&hmem_regs->rspProducerIndexAddrLow,
|
|
qdev->rsp_producer_index_phy_addr_low);
|
|
|
|
ql_write_page1_reg(qdev,
|
|
&hmem_regs->rspBaseAddrHigh,
|
|
MS_64BITS(qdev->rsp_q_phy_addr));
|
|
|
|
ql_write_page1_reg(qdev,
|
|
&hmem_regs->rspBaseAddrLow,
|
|
LS_64BITS(qdev->rsp_q_phy_addr));
|
|
|
|
ql_write_page1_reg(qdev, &hmem_regs->rspLength, NUM_RSP_Q_ENTRIES);
|
|
|
|
/* Large Buffer Queue */
|
|
ql_write_page1_reg(qdev,
|
|
&hmem_regs->rxLargeQBaseAddrHigh,
|
|
MS_64BITS(qdev->lrg_buf_q_phy_addr));
|
|
|
|
ql_write_page1_reg(qdev,
|
|
&hmem_regs->rxLargeQBaseAddrLow,
|
|
LS_64BITS(qdev->lrg_buf_q_phy_addr));
|
|
|
|
ql_write_page1_reg(qdev, &hmem_regs->rxLargeQLength, qdev->num_lbufq_entries);
|
|
|
|
ql_write_page1_reg(qdev,
|
|
&hmem_regs->rxLargeBufferLength,
|
|
qdev->lrg_buffer_len);
|
|
|
|
/* Small Buffer Queue */
|
|
ql_write_page1_reg(qdev,
|
|
&hmem_regs->rxSmallQBaseAddrHigh,
|
|
MS_64BITS(qdev->small_buf_q_phy_addr));
|
|
|
|
ql_write_page1_reg(qdev,
|
|
&hmem_regs->rxSmallQBaseAddrLow,
|
|
LS_64BITS(qdev->small_buf_q_phy_addr));
|
|
|
|
ql_write_page1_reg(qdev, &hmem_regs->rxSmallQLength, NUM_SBUFQ_ENTRIES);
|
|
ql_write_page1_reg(qdev,
|
|
&hmem_regs->rxSmallBufferLength,
|
|
QL_SMALL_BUFFER_SIZE);
|
|
|
|
qdev->small_buf_q_producer_index = NUM_SBUFQ_ENTRIES - 1;
|
|
qdev->small_buf_release_cnt = 8;
|
|
qdev->lrg_buf_q_producer_index = qdev->num_lbufq_entries - 1;
|
|
qdev->lrg_buf_release_cnt = 8;
|
|
qdev->lrg_buf_next_free =
|
|
(struct bufq_addr_element *)qdev->lrg_buf_q_virt_addr;
|
|
qdev->small_buf_index = 0;
|
|
qdev->lrg_buf_index = 0;
|
|
qdev->lrg_buf_free_count = 0;
|
|
qdev->lrg_buf_free_head = NULL;
|
|
qdev->lrg_buf_free_tail = NULL;
|
|
|
|
ql_write_common_reg(qdev,
|
|
&port_regs->CommonRegs.
|
|
rxSmallQProducerIndex,
|
|
qdev->small_buf_q_producer_index);
|
|
ql_write_common_reg(qdev,
|
|
&port_regs->CommonRegs.
|
|
rxLargeQProducerIndex,
|
|
qdev->lrg_buf_q_producer_index);
|
|
|
|
/*
|
|
* Find out if the chip has already been initialized. If it has, then
|
|
* we skip some of the initialization.
|
|
*/
|
|
clear_bit(QL_LINK_MASTER, &qdev->flags);
|
|
value = ql_read_page0_reg(qdev, &port_regs->portStatus);
|
|
if ((value & PORT_STATUS_IC) == 0) {
|
|
|
|
/* Chip has not been configured yet, so let it rip. */
|
|
if(ql_init_misc_registers(qdev)) {
|
|
status = -1;
|
|
goto out;
|
|
}
|
|
|
|
value = qdev->nvram_data.tcpMaxWindowSize;
|
|
ql_write_page0_reg(qdev, &port_regs->tcpMaxWindow, value);
|
|
|
|
value = (0xFFFF << 16) | qdev->nvram_data.extHwConfig;
|
|
|
|
if(ql_sem_spinlock(qdev, QL_FLASH_SEM_MASK,
|
|
(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index)
|
|
* 2) << 13)) {
|
|
status = -1;
|
|
goto out;
|
|
}
|
|
ql_write_page0_reg(qdev, &port_regs->ExternalHWConfig, value);
|
|
ql_write_page0_reg(qdev, &port_regs->InternalChipConfig,
|
|
(((INTERNAL_CHIP_SD | INTERNAL_CHIP_WE) <<
|
|
16) | (INTERNAL_CHIP_SD |
|
|
INTERNAL_CHIP_WE)));
|
|
ql_sem_unlock(qdev, QL_FLASH_SEM_MASK);
|
|
}
|
|
|
|
if (qdev->mac_index)
|
|
ql_write_page0_reg(qdev,
|
|
&port_regs->mac1MaxFrameLengthReg,
|
|
qdev->max_frame_size);
|
|
else
|
|
ql_write_page0_reg(qdev,
|
|
&port_regs->mac0MaxFrameLengthReg,
|
|
qdev->max_frame_size);
|
|
|
|
if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK,
|
|
(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
|
|
2) << 7)) {
|
|
status = -1;
|
|
goto out;
|
|
}
|
|
|
|
PHY_Setup(qdev);
|
|
ql_init_scan_mode(qdev);
|
|
ql_get_phy_owner(qdev);
|
|
|
|
/* Load the MAC Configuration */
|
|
|
|
/* Program lower 32 bits of the MAC address */
|
|
ql_write_page0_reg(qdev, &port_regs->macAddrIndirectPtrReg,
|
|
(MAC_ADDR_INDIRECT_PTR_REG_RP_MASK << 16));
|
|
ql_write_page0_reg(qdev, &port_regs->macAddrDataReg,
|
|
((qdev->ndev->dev_addr[2] << 24)
|
|
| (qdev->ndev->dev_addr[3] << 16)
|
|
| (qdev->ndev->dev_addr[4] << 8)
|
|
| qdev->ndev->dev_addr[5]));
|
|
|
|
/* Program top 16 bits of the MAC address */
|
|
ql_write_page0_reg(qdev, &port_regs->macAddrIndirectPtrReg,
|
|
((MAC_ADDR_INDIRECT_PTR_REG_RP_MASK << 16) | 1));
|
|
ql_write_page0_reg(qdev, &port_regs->macAddrDataReg,
|
|
((qdev->ndev->dev_addr[0] << 8)
|
|
| qdev->ndev->dev_addr[1]));
|
|
|
|
/* Enable Primary MAC */
|
|
ql_write_page0_reg(qdev, &port_regs->macAddrIndirectPtrReg,
|
|
((MAC_ADDR_INDIRECT_PTR_REG_PE << 16) |
|
|
MAC_ADDR_INDIRECT_PTR_REG_PE));
|
|
|
|
/* Clear Primary and Secondary IP addresses */
|
|
ql_write_page0_reg(qdev, &port_regs->ipAddrIndexReg,
|
|
((IP_ADDR_INDEX_REG_MASK << 16) |
|
|
(qdev->mac_index << 2)));
|
|
ql_write_page0_reg(qdev, &port_regs->ipAddrDataReg, 0);
|
|
|
|
ql_write_page0_reg(qdev, &port_regs->ipAddrIndexReg,
|
|
((IP_ADDR_INDEX_REG_MASK << 16) |
|
|
((qdev->mac_index << 2) + 1)));
|
|
ql_write_page0_reg(qdev, &port_regs->ipAddrDataReg, 0);
|
|
|
|
ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
|
|
|
|
/* Indicate Configuration Complete */
|
|
ql_write_page0_reg(qdev,
|
|
&port_regs->portControl,
|
|
((PORT_CONTROL_CC << 16) | PORT_CONTROL_CC));
|
|
|
|
do {
|
|
value = ql_read_page0_reg(qdev, &port_regs->portStatus);
|
|
if (value & PORT_STATUS_IC)
|
|
break;
|
|
msleep(500);
|
|
} while (--delay);
|
|
|
|
if (delay == 0) {
|
|
printk(KERN_ERR PFX
|
|
"%s: Hw Initialization timeout.\n", qdev->ndev->name);
|
|
status = -1;
|
|
goto out;
|
|
}
|
|
|
|
/* Enable Ethernet Function */
|
|
if (qdev->device_id == QL3032_DEVICE_ID) {
|
|
value =
|
|
(QL3032_PORT_CONTROL_EF | QL3032_PORT_CONTROL_KIE |
|
|
QL3032_PORT_CONTROL_EIv6 | QL3032_PORT_CONTROL_EIv4 |
|
|
QL3032_PORT_CONTROL_ET);
|
|
ql_write_page0_reg(qdev, &port_regs->functionControl,
|
|
((value << 16) | value));
|
|
} else {
|
|
value =
|
|
(PORT_CONTROL_EF | PORT_CONTROL_ET | PORT_CONTROL_EI |
|
|
PORT_CONTROL_HH);
|
|
ql_write_page0_reg(qdev, &port_regs->portControl,
|
|
((value << 16) | value));
|
|
}
|
|
|
|
|
|
out:
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Caller holds hw_lock.
|
|
*/
|
|
static int ql_adapter_reset(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
|
|
int status = 0;
|
|
u16 value;
|
|
int max_wait_time;
|
|
|
|
set_bit(QL_RESET_ACTIVE, &qdev->flags);
|
|
clear_bit(QL_RESET_DONE, &qdev->flags);
|
|
|
|
/*
|
|
* Issue soft reset to chip.
|
|
*/
|
|
printk(KERN_DEBUG PFX
|
|
"%s: Issue soft reset to chip.\n",
|
|
qdev->ndev->name);
|
|
ql_write_common_reg(qdev,
|
|
&port_regs->CommonRegs.ispControlStatus,
|
|
((ISP_CONTROL_SR << 16) | ISP_CONTROL_SR));
|
|
|
|
/* Wait 3 seconds for reset to complete. */
|
|
printk(KERN_DEBUG PFX
|
|
"%s: Wait 10 milliseconds for reset to complete.\n",
|
|
qdev->ndev->name);
|
|
|
|
/* Wait until the firmware tells us the Soft Reset is done */
|
|
max_wait_time = 5;
|
|
do {
|
|
value =
|
|
ql_read_common_reg(qdev,
|
|
&port_regs->CommonRegs.ispControlStatus);
|
|
if ((value & ISP_CONTROL_SR) == 0)
|
|
break;
|
|
|
|
ssleep(1);
|
|
} while ((--max_wait_time));
|
|
|
|
/*
|
|
* Also, make sure that the Network Reset Interrupt bit has been
|
|
* cleared after the soft reset has taken place.
|
|
*/
|
|
value =
|
|
ql_read_common_reg(qdev, &port_regs->CommonRegs.ispControlStatus);
|
|
if (value & ISP_CONTROL_RI) {
|
|
printk(KERN_DEBUG PFX
|
|
"ql_adapter_reset: clearing RI after reset.\n");
|
|
ql_write_common_reg(qdev,
|
|
&port_regs->CommonRegs.
|
|
ispControlStatus,
|
|
((ISP_CONTROL_RI << 16) | ISP_CONTROL_RI));
|
|
}
|
|
|
|
if (max_wait_time == 0) {
|
|
/* Issue Force Soft Reset */
|
|
ql_write_common_reg(qdev,
|
|
&port_regs->CommonRegs.
|
|
ispControlStatus,
|
|
((ISP_CONTROL_FSR << 16) |
|
|
ISP_CONTROL_FSR));
|
|
/*
|
|
* Wait until the firmware tells us the Force Soft Reset is
|
|
* done
|
|
*/
|
|
max_wait_time = 5;
|
|
do {
|
|
value =
|
|
ql_read_common_reg(qdev,
|
|
&port_regs->CommonRegs.
|
|
ispControlStatus);
|
|
if ((value & ISP_CONTROL_FSR) == 0) {
|
|
break;
|
|
}
|
|
ssleep(1);
|
|
} while ((--max_wait_time));
|
|
}
|
|
if (max_wait_time == 0)
|
|
status = 1;
|
|
|
|
clear_bit(QL_RESET_ACTIVE, &qdev->flags);
|
|
set_bit(QL_RESET_DONE, &qdev->flags);
|
|
return status;
|
|
}
|
|
|
|
static void ql_set_mac_info(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
|
|
u32 value, port_status;
|
|
u8 func_number;
|
|
|
|
/* Get the function number */
|
|
value =
|
|
ql_read_common_reg_l(qdev, &port_regs->CommonRegs.ispControlStatus);
|
|
func_number = (u8) ((value >> 4) & OPCODE_FUNC_ID_MASK);
|
|
port_status = ql_read_page0_reg(qdev, &port_regs->portStatus);
|
|
switch (value & ISP_CONTROL_FN_MASK) {
|
|
case ISP_CONTROL_FN0_NET:
|
|
qdev->mac_index = 0;
|
|
qdev->mac_ob_opcode = OUTBOUND_MAC_IOCB | func_number;
|
|
qdev->tcp_ob_opcode = OUTBOUND_TCP_IOCB | func_number;
|
|
qdev->update_ob_opcode = UPDATE_NCB_IOCB | func_number;
|
|
qdev->mb_bit_mask = FN0_MA_BITS_MASK;
|
|
qdev->PHYAddr = PORT0_PHY_ADDRESS;
|
|
if (port_status & PORT_STATUS_SM0)
|
|
set_bit(QL_LINK_OPTICAL,&qdev->flags);
|
|
else
|
|
clear_bit(QL_LINK_OPTICAL,&qdev->flags);
|
|
break;
|
|
|
|
case ISP_CONTROL_FN1_NET:
|
|
qdev->mac_index = 1;
|
|
qdev->mac_ob_opcode = OUTBOUND_MAC_IOCB | func_number;
|
|
qdev->tcp_ob_opcode = OUTBOUND_TCP_IOCB | func_number;
|
|
qdev->update_ob_opcode = UPDATE_NCB_IOCB | func_number;
|
|
qdev->mb_bit_mask = FN1_MA_BITS_MASK;
|
|
qdev->PHYAddr = PORT1_PHY_ADDRESS;
|
|
if (port_status & PORT_STATUS_SM1)
|
|
set_bit(QL_LINK_OPTICAL,&qdev->flags);
|
|
else
|
|
clear_bit(QL_LINK_OPTICAL,&qdev->flags);
|
|
break;
|
|
|
|
case ISP_CONTROL_FN0_SCSI:
|
|
case ISP_CONTROL_FN1_SCSI:
|
|
default:
|
|
printk(KERN_DEBUG PFX
|
|
"%s: Invalid function number, ispControlStatus = 0x%x\n",
|
|
qdev->ndev->name,value);
|
|
break;
|
|
}
|
|
qdev->numPorts = qdev->nvram_data.numPorts;
|
|
}
|
|
|
|
static void ql_display_dev_info(struct net_device *ndev)
|
|
{
|
|
struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
|
|
struct pci_dev *pdev = qdev->pdev;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
printk(KERN_INFO PFX
|
|
"\n%s Adapter %d RevisionID %d found %s on PCI slot %d.\n",
|
|
DRV_NAME, qdev->index, qdev->chip_rev_id,
|
|
(qdev->device_id == QL3032_DEVICE_ID) ? "QLA3032" : "QLA3022",
|
|
qdev->pci_slot);
|
|
printk(KERN_INFO PFX
|
|
"%s Interface.\n",
|
|
test_bit(QL_LINK_OPTICAL,&qdev->flags) ? "OPTICAL" : "COPPER");
|
|
|
|
/*
|
|
* Print PCI bus width/type.
|
|
*/
|
|
printk(KERN_INFO PFX
|
|
"Bus interface is %s %s.\n",
|
|
((qdev->pci_width == 64) ? "64-bit" : "32-bit"),
|
|
((qdev->pci_x) ? "PCI-X" : "PCI"));
|
|
|
|
printk(KERN_INFO PFX
|
|
"mem IO base address adjusted = 0x%p\n",
|
|
qdev->mem_map_registers);
|
|
printk(KERN_INFO PFX "Interrupt number = %d\n", pdev->irq);
|
|
|
|
if (netif_msg_probe(qdev))
|
|
printk(KERN_INFO PFX
|
|
"%s: MAC address %s\n",
|
|
ndev->name, print_mac(mac, ndev->dev_addr));
|
|
}
|
|
|
|
static int ql_adapter_down(struct ql3_adapter *qdev, int do_reset)
|
|
{
|
|
struct net_device *ndev = qdev->ndev;
|
|
int retval = 0;
|
|
|
|
netif_stop_queue(ndev);
|
|
netif_carrier_off(ndev);
|
|
|
|
clear_bit(QL_ADAPTER_UP,&qdev->flags);
|
|
clear_bit(QL_LINK_MASTER,&qdev->flags);
|
|
|
|
ql_disable_interrupts(qdev);
|
|
|
|
free_irq(qdev->pdev->irq, ndev);
|
|
|
|
if (qdev->msi && test_bit(QL_MSI_ENABLED,&qdev->flags)) {
|
|
printk(KERN_INFO PFX
|
|
"%s: calling pci_disable_msi().\n", qdev->ndev->name);
|
|
clear_bit(QL_MSI_ENABLED,&qdev->flags);
|
|
pci_disable_msi(qdev->pdev);
|
|
}
|
|
|
|
del_timer_sync(&qdev->adapter_timer);
|
|
|
|
napi_disable(&qdev->napi);
|
|
|
|
if (do_reset) {
|
|
int soft_reset;
|
|
unsigned long hw_flags;
|
|
|
|
spin_lock_irqsave(&qdev->hw_lock, hw_flags);
|
|
if (ql_wait_for_drvr_lock(qdev)) {
|
|
if ((soft_reset = ql_adapter_reset(qdev))) {
|
|
printk(KERN_ERR PFX
|
|
"%s: ql_adapter_reset(%d) FAILED!\n",
|
|
ndev->name, qdev->index);
|
|
}
|
|
printk(KERN_ERR PFX
|
|
"%s: Releaseing driver lock via chip reset.\n",ndev->name);
|
|
} else {
|
|
printk(KERN_ERR PFX
|
|
"%s: Could not acquire driver lock to do "
|
|
"reset!\n", ndev->name);
|
|
retval = -1;
|
|
}
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
}
|
|
ql_free_mem_resources(qdev);
|
|
return retval;
|
|
}
|
|
|
|
static int ql_adapter_up(struct ql3_adapter *qdev)
|
|
{
|
|
struct net_device *ndev = qdev->ndev;
|
|
int err;
|
|
unsigned long irq_flags = IRQF_SAMPLE_RANDOM | IRQF_SHARED;
|
|
unsigned long hw_flags;
|
|
|
|
if (ql_alloc_mem_resources(qdev)) {
|
|
printk(KERN_ERR PFX
|
|
"%s Unable to allocate buffers.\n", ndev->name);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (qdev->msi) {
|
|
if (pci_enable_msi(qdev->pdev)) {
|
|
printk(KERN_ERR PFX
|
|
"%s: User requested MSI, but MSI failed to "
|
|
"initialize. Continuing without MSI.\n",
|
|
qdev->ndev->name);
|
|
qdev->msi = 0;
|
|
} else {
|
|
printk(KERN_INFO PFX "%s: MSI Enabled...\n", qdev->ndev->name);
|
|
set_bit(QL_MSI_ENABLED,&qdev->flags);
|
|
irq_flags &= ~IRQF_SHARED;
|
|
}
|
|
}
|
|
|
|
if ((err = request_irq(qdev->pdev->irq,
|
|
ql3xxx_isr,
|
|
irq_flags, ndev->name, ndev))) {
|
|
printk(KERN_ERR PFX
|
|
"%s: Failed to reserve interrupt %d already in use.\n",
|
|
ndev->name, qdev->pdev->irq);
|
|
goto err_irq;
|
|
}
|
|
|
|
spin_lock_irqsave(&qdev->hw_lock, hw_flags);
|
|
|
|
if ((err = ql_wait_for_drvr_lock(qdev))) {
|
|
if ((err = ql_adapter_initialize(qdev))) {
|
|
printk(KERN_ERR PFX
|
|
"%s: Unable to initialize adapter.\n",
|
|
ndev->name);
|
|
goto err_init;
|
|
}
|
|
printk(KERN_ERR PFX
|
|
"%s: Releaseing driver lock.\n",ndev->name);
|
|
ql_sem_unlock(qdev, QL_DRVR_SEM_MASK);
|
|
} else {
|
|
printk(KERN_ERR PFX
|
|
"%s: Could not aquire driver lock.\n",
|
|
ndev->name);
|
|
goto err_lock;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
|
|
set_bit(QL_ADAPTER_UP,&qdev->flags);
|
|
|
|
mod_timer(&qdev->adapter_timer, jiffies + HZ * 1);
|
|
|
|
napi_enable(&qdev->napi);
|
|
ql_enable_interrupts(qdev);
|
|
return 0;
|
|
|
|
err_init:
|
|
ql_sem_unlock(qdev, QL_DRVR_SEM_MASK);
|
|
err_lock:
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
free_irq(qdev->pdev->irq, ndev);
|
|
err_irq:
|
|
if (qdev->msi && test_bit(QL_MSI_ENABLED,&qdev->flags)) {
|
|
printk(KERN_INFO PFX
|
|
"%s: calling pci_disable_msi().\n",
|
|
qdev->ndev->name);
|
|
clear_bit(QL_MSI_ENABLED,&qdev->flags);
|
|
pci_disable_msi(qdev->pdev);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static int ql_cycle_adapter(struct ql3_adapter *qdev, int reset)
|
|
{
|
|
if( ql_adapter_down(qdev,reset) || ql_adapter_up(qdev)) {
|
|
printk(KERN_ERR PFX
|
|
"%s: Driver up/down cycle failed, "
|
|
"closing device\n",qdev->ndev->name);
|
|
dev_close(qdev->ndev);
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int ql3xxx_close(struct net_device *ndev)
|
|
{
|
|
struct ql3_adapter *qdev = netdev_priv(ndev);
|
|
|
|
/*
|
|
* Wait for device to recover from a reset.
|
|
* (Rarely happens, but possible.)
|
|
*/
|
|
while (!test_bit(QL_ADAPTER_UP,&qdev->flags))
|
|
msleep(50);
|
|
|
|
ql_adapter_down(qdev,QL_DO_RESET);
|
|
return 0;
|
|
}
|
|
|
|
static int ql3xxx_open(struct net_device *ndev)
|
|
{
|
|
struct ql3_adapter *qdev = netdev_priv(ndev);
|
|
return (ql_adapter_up(qdev));
|
|
}
|
|
|
|
static void ql3xxx_set_multicast_list(struct net_device *ndev)
|
|
{
|
|
/*
|
|
* We are manually parsing the list in the net_device structure.
|
|
*/
|
|
return;
|
|
}
|
|
|
|
static int ql3xxx_set_mac_address(struct net_device *ndev, void *p)
|
|
{
|
|
struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
|
|
struct ql3xxx_port_registers __iomem *port_regs =
|
|
qdev->mem_map_registers;
|
|
struct sockaddr *addr = p;
|
|
unsigned long hw_flags;
|
|
|
|
if (netif_running(ndev))
|
|
return -EBUSY;
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
|
|
|
|
spin_lock_irqsave(&qdev->hw_lock, hw_flags);
|
|
/* Program lower 32 bits of the MAC address */
|
|
ql_write_page0_reg(qdev, &port_regs->macAddrIndirectPtrReg,
|
|
(MAC_ADDR_INDIRECT_PTR_REG_RP_MASK << 16));
|
|
ql_write_page0_reg(qdev, &port_regs->macAddrDataReg,
|
|
((ndev->dev_addr[2] << 24) | (ndev->
|
|
dev_addr[3] << 16) |
|
|
(ndev->dev_addr[4] << 8) | ndev->dev_addr[5]));
|
|
|
|
/* Program top 16 bits of the MAC address */
|
|
ql_write_page0_reg(qdev, &port_regs->macAddrIndirectPtrReg,
|
|
((MAC_ADDR_INDIRECT_PTR_REG_RP_MASK << 16) | 1));
|
|
ql_write_page0_reg(qdev, &port_regs->macAddrDataReg,
|
|
((ndev->dev_addr[0] << 8) | ndev->dev_addr[1]));
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ql3xxx_tx_timeout(struct net_device *ndev)
|
|
{
|
|
struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
|
|
|
|
printk(KERN_ERR PFX "%s: Resetting...\n", ndev->name);
|
|
/*
|
|
* Stop the queues, we've got a problem.
|
|
*/
|
|
netif_stop_queue(ndev);
|
|
|
|
/*
|
|
* Wake up the worker to process this event.
|
|
*/
|
|
queue_delayed_work(qdev->workqueue, &qdev->tx_timeout_work, 0);
|
|
}
|
|
|
|
static void ql_reset_work(struct work_struct *work)
|
|
{
|
|
struct ql3_adapter *qdev =
|
|
container_of(work, struct ql3_adapter, reset_work.work);
|
|
struct net_device *ndev = qdev->ndev;
|
|
u32 value;
|
|
struct ql_tx_buf_cb *tx_cb;
|
|
int max_wait_time, i;
|
|
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
|
|
unsigned long hw_flags;
|
|
|
|
if (test_bit((QL_RESET_PER_SCSI | QL_RESET_START),&qdev->flags)) {
|
|
clear_bit(QL_LINK_MASTER,&qdev->flags);
|
|
|
|
/*
|
|
* Loop through the active list and return the skb.
|
|
*/
|
|
for (i = 0; i < NUM_REQ_Q_ENTRIES; i++) {
|
|
int j;
|
|
tx_cb = &qdev->tx_buf[i];
|
|
if (tx_cb->skb) {
|
|
printk(KERN_DEBUG PFX
|
|
"%s: Freeing lost SKB.\n",
|
|
qdev->ndev->name);
|
|
pci_unmap_single(qdev->pdev,
|
|
pci_unmap_addr(&tx_cb->map[0], mapaddr),
|
|
pci_unmap_len(&tx_cb->map[0], maplen),
|
|
PCI_DMA_TODEVICE);
|
|
for(j=1;j<tx_cb->seg_count;j++) {
|
|
pci_unmap_page(qdev->pdev,
|
|
pci_unmap_addr(&tx_cb->map[j],mapaddr),
|
|
pci_unmap_len(&tx_cb->map[j],maplen),
|
|
PCI_DMA_TODEVICE);
|
|
}
|
|
dev_kfree_skb(tx_cb->skb);
|
|
tx_cb->skb = NULL;
|
|
}
|
|
}
|
|
|
|
printk(KERN_ERR PFX
|
|
"%s: Clearing NRI after reset.\n", qdev->ndev->name);
|
|
spin_lock_irqsave(&qdev->hw_lock, hw_flags);
|
|
ql_write_common_reg(qdev,
|
|
&port_regs->CommonRegs.
|
|
ispControlStatus,
|
|
((ISP_CONTROL_RI << 16) | ISP_CONTROL_RI));
|
|
/*
|
|
* Wait the for Soft Reset to Complete.
|
|
*/
|
|
max_wait_time = 10;
|
|
do {
|
|
value = ql_read_common_reg(qdev,
|
|
&port_regs->CommonRegs.
|
|
|
|
ispControlStatus);
|
|
if ((value & ISP_CONTROL_SR) == 0) {
|
|
printk(KERN_DEBUG PFX
|
|
"%s: reset completed.\n",
|
|
qdev->ndev->name);
|
|
break;
|
|
}
|
|
|
|
if (value & ISP_CONTROL_RI) {
|
|
printk(KERN_DEBUG PFX
|
|
"%s: clearing NRI after reset.\n",
|
|
qdev->ndev->name);
|
|
ql_write_common_reg(qdev,
|
|
&port_regs->
|
|
CommonRegs.
|
|
ispControlStatus,
|
|
((ISP_CONTROL_RI <<
|
|
16) | ISP_CONTROL_RI));
|
|
}
|
|
|
|
ssleep(1);
|
|
} while (--max_wait_time);
|
|
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
|
|
|
|
if (value & ISP_CONTROL_SR) {
|
|
|
|
/*
|
|
* Set the reset flags and clear the board again.
|
|
* Nothing else to do...
|
|
*/
|
|
printk(KERN_ERR PFX
|
|
"%s: Timed out waiting for reset to "
|
|
"complete.\n", ndev->name);
|
|
printk(KERN_ERR PFX
|
|
"%s: Do a reset.\n", ndev->name);
|
|
clear_bit(QL_RESET_PER_SCSI,&qdev->flags);
|
|
clear_bit(QL_RESET_START,&qdev->flags);
|
|
ql_cycle_adapter(qdev,QL_DO_RESET);
|
|
return;
|
|
}
|
|
|
|
clear_bit(QL_RESET_ACTIVE,&qdev->flags);
|
|
clear_bit(QL_RESET_PER_SCSI,&qdev->flags);
|
|
clear_bit(QL_RESET_START,&qdev->flags);
|
|
ql_cycle_adapter(qdev,QL_NO_RESET);
|
|
}
|
|
}
|
|
|
|
static void ql_tx_timeout_work(struct work_struct *work)
|
|
{
|
|
struct ql3_adapter *qdev =
|
|
container_of(work, struct ql3_adapter, tx_timeout_work.work);
|
|
|
|
ql_cycle_adapter(qdev, QL_DO_RESET);
|
|
}
|
|
|
|
static void ql_get_board_info(struct ql3_adapter *qdev)
|
|
{
|
|
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
|
|
u32 value;
|
|
|
|
value = ql_read_page0_reg_l(qdev, &port_regs->portStatus);
|
|
|
|
qdev->chip_rev_id = ((value & PORT_STATUS_REV_ID_MASK) >> 12);
|
|
if (value & PORT_STATUS_64)
|
|
qdev->pci_width = 64;
|
|
else
|
|
qdev->pci_width = 32;
|
|
if (value & PORT_STATUS_X)
|
|
qdev->pci_x = 1;
|
|
else
|
|
qdev->pci_x = 0;
|
|
qdev->pci_slot = (u8) PCI_SLOT(qdev->pdev->devfn);
|
|
}
|
|
|
|
static void ql3xxx_timer(unsigned long ptr)
|
|
{
|
|
struct ql3_adapter *qdev = (struct ql3_adapter *)ptr;
|
|
queue_delayed_work(qdev->workqueue, &qdev->link_state_work, 0);
|
|
}
|
|
|
|
static int __devinit ql3xxx_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *pci_entry)
|
|
{
|
|
struct net_device *ndev = NULL;
|
|
struct ql3_adapter *qdev = NULL;
|
|
static int cards_found = 0;
|
|
int pci_using_dac, err;
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "%s cannot enable PCI device\n",
|
|
pci_name(pdev));
|
|
goto err_out;
|
|
}
|
|
|
|
err = pci_request_regions(pdev, DRV_NAME);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "%s cannot obtain PCI resources\n",
|
|
pci_name(pdev));
|
|
goto err_out_disable_pdev;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
|
|
pci_using_dac = 1;
|
|
err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
|
|
} else if (!(err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
|
|
pci_using_dac = 0;
|
|
err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
}
|
|
|
|
if (err) {
|
|
printk(KERN_ERR PFX "%s no usable DMA configuration\n",
|
|
pci_name(pdev));
|
|
goto err_out_free_regions;
|
|
}
|
|
|
|
ndev = alloc_etherdev(sizeof(struct ql3_adapter));
|
|
if (!ndev) {
|
|
printk(KERN_ERR PFX "%s could not alloc etherdev\n",
|
|
pci_name(pdev));
|
|
err = -ENOMEM;
|
|
goto err_out_free_regions;
|
|
}
|
|
|
|
SET_NETDEV_DEV(ndev, &pdev->dev);
|
|
|
|
pci_set_drvdata(pdev, ndev);
|
|
|
|
qdev = netdev_priv(ndev);
|
|
qdev->index = cards_found;
|
|
qdev->ndev = ndev;
|
|
qdev->pdev = pdev;
|
|
qdev->device_id = pci_entry->device;
|
|
qdev->port_link_state = LS_DOWN;
|
|
if (msi)
|
|
qdev->msi = 1;
|
|
|
|
qdev->msg_enable = netif_msg_init(debug, default_msg);
|
|
|
|
if (pci_using_dac)
|
|
ndev->features |= NETIF_F_HIGHDMA;
|
|
if (qdev->device_id == QL3032_DEVICE_ID)
|
|
ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
|
|
|
|
qdev->mem_map_registers =
|
|
ioremap_nocache(pci_resource_start(pdev, 1),
|
|
pci_resource_len(qdev->pdev, 1));
|
|
if (!qdev->mem_map_registers) {
|
|
printk(KERN_ERR PFX "%s: cannot map device registers\n",
|
|
pci_name(pdev));
|
|
err = -EIO;
|
|
goto err_out_free_ndev;
|
|
}
|
|
|
|
spin_lock_init(&qdev->adapter_lock);
|
|
spin_lock_init(&qdev->hw_lock);
|
|
|
|
/* Set driver entry points */
|
|
ndev->open = ql3xxx_open;
|
|
ndev->hard_start_xmit = ql3xxx_send;
|
|
ndev->stop = ql3xxx_close;
|
|
ndev->set_multicast_list = ql3xxx_set_multicast_list;
|
|
SET_ETHTOOL_OPS(ndev, &ql3xxx_ethtool_ops);
|
|
ndev->set_mac_address = ql3xxx_set_mac_address;
|
|
ndev->tx_timeout = ql3xxx_tx_timeout;
|
|
ndev->watchdog_timeo = 5 * HZ;
|
|
|
|
netif_napi_add(ndev, &qdev->napi, ql_poll, 64);
|
|
|
|
ndev->irq = pdev->irq;
|
|
|
|
/* make sure the EEPROM is good */
|
|
if (ql_get_nvram_params(qdev)) {
|
|
printk(KERN_ALERT PFX
|
|
"ql3xxx_probe: Adapter #%d, Invalid NVRAM parameters.\n",
|
|
qdev->index);
|
|
err = -EIO;
|
|
goto err_out_iounmap;
|
|
}
|
|
|
|
ql_set_mac_info(qdev);
|
|
|
|
/* Validate and set parameters */
|
|
if (qdev->mac_index) {
|
|
ndev->mtu = qdev->nvram_data.macCfg_port1.etherMtu_mac ;
|
|
memcpy(ndev->dev_addr, &qdev->nvram_data.funcCfg_fn2.macAddress,
|
|
ETH_ALEN);
|
|
} else {
|
|
ndev->mtu = qdev->nvram_data.macCfg_port0.etherMtu_mac ;
|
|
memcpy(ndev->dev_addr, &qdev->nvram_data.funcCfg_fn0.macAddress,
|
|
ETH_ALEN);
|
|
}
|
|
memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len);
|
|
|
|
ndev->tx_queue_len = NUM_REQ_Q_ENTRIES;
|
|
|
|
/* Turn off support for multicasting */
|
|
ndev->flags &= ~IFF_MULTICAST;
|
|
|
|
/* Record PCI bus information. */
|
|
ql_get_board_info(qdev);
|
|
|
|
/*
|
|
* Set the Maximum Memory Read Byte Count value. We do this to handle
|
|
* jumbo frames.
|
|
*/
|
|
if (qdev->pci_x) {
|
|
pci_write_config_word(pdev, (int)0x4e, (u16) 0x0036);
|
|
}
|
|
|
|
err = register_netdev(ndev);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "%s: cannot register net device\n",
|
|
pci_name(pdev));
|
|
goto err_out_iounmap;
|
|
}
|
|
|
|
/* we're going to reset, so assume we have no link for now */
|
|
|
|
netif_carrier_off(ndev);
|
|
netif_stop_queue(ndev);
|
|
|
|
qdev->workqueue = create_singlethread_workqueue(ndev->name);
|
|
INIT_DELAYED_WORK(&qdev->reset_work, ql_reset_work);
|
|
INIT_DELAYED_WORK(&qdev->tx_timeout_work, ql_tx_timeout_work);
|
|
INIT_DELAYED_WORK(&qdev->link_state_work, ql_link_state_machine_work);
|
|
|
|
init_timer(&qdev->adapter_timer);
|
|
qdev->adapter_timer.function = ql3xxx_timer;
|
|
qdev->adapter_timer.expires = jiffies + HZ * 2; /* two second delay */
|
|
qdev->adapter_timer.data = (unsigned long)qdev;
|
|
|
|
if(!cards_found) {
|
|
printk(KERN_ALERT PFX "%s\n", DRV_STRING);
|
|
printk(KERN_ALERT PFX "Driver name: %s, Version: %s.\n",
|
|
DRV_NAME, DRV_VERSION);
|
|
}
|
|
ql_display_dev_info(ndev);
|
|
|
|
cards_found++;
|
|
return 0;
|
|
|
|
err_out_iounmap:
|
|
iounmap(qdev->mem_map_registers);
|
|
err_out_free_ndev:
|
|
free_netdev(ndev);
|
|
err_out_free_regions:
|
|
pci_release_regions(pdev);
|
|
err_out_disable_pdev:
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
err_out:
|
|
return err;
|
|
}
|
|
|
|
static void __devexit ql3xxx_remove(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *ndev = pci_get_drvdata(pdev);
|
|
struct ql3_adapter *qdev = netdev_priv(ndev);
|
|
|
|
unregister_netdev(ndev);
|
|
qdev = netdev_priv(ndev);
|
|
|
|
ql_disable_interrupts(qdev);
|
|
|
|
if (qdev->workqueue) {
|
|
cancel_delayed_work(&qdev->reset_work);
|
|
cancel_delayed_work(&qdev->tx_timeout_work);
|
|
destroy_workqueue(qdev->workqueue);
|
|
qdev->workqueue = NULL;
|
|
}
|
|
|
|
iounmap(qdev->mem_map_registers);
|
|
pci_release_regions(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
free_netdev(ndev);
|
|
}
|
|
|
|
static struct pci_driver ql3xxx_driver = {
|
|
|
|
.name = DRV_NAME,
|
|
.id_table = ql3xxx_pci_tbl,
|
|
.probe = ql3xxx_probe,
|
|
.remove = __devexit_p(ql3xxx_remove),
|
|
};
|
|
|
|
static int __init ql3xxx_init_module(void)
|
|
{
|
|
return pci_register_driver(&ql3xxx_driver);
|
|
}
|
|
|
|
static void __exit ql3xxx_exit(void)
|
|
{
|
|
pci_unregister_driver(&ql3xxx_driver);
|
|
}
|
|
|
|
module_init(ql3xxx_init_module);
|
|
module_exit(ql3xxx_exit);
|