Amelie Delaunay 63e006c107 pinctrl: stmfx: fix valid_mask init sequence ... With stmfx_pinctrl_gpio_init_valid_mask callback, gpio_valid_mask was used to initialize gpiochip valid_mask for gpiolib. But gpio_valid_mask was not yet initialized. gpio_valid_mask required gpio-ranges to be registered, this is the case after gpiochip_add_data call. But init_valid_mask callback is also called under gpiochip_add_data. gpio_valid_mask initialization cannot be moved before gpiochip_add_data because gpio-ranges are not registered. So, it is not possible to use init_valid_mask callback. To avoid this issue, get rid of valid_mask and rely on ranges. Fixes: da9b142ab2 ("pinctrl: stmfx: Use the callback to populate valid_mask") Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20191104100908.10880-1-amelie.delaunay@st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>		2019-11-07 10:06:46 +01:00
..
actions
aspeed	pinctrl: aspeed-g6: Rename SD3 to EMMC and rework pin groups	2019-10-16 15:58:27 +02:00
bcm	pinctrl: iproc: allow for error from platform_get_irq()	2019-10-05 18:36:57 +02:00
berlin	pinctrl: berlin: as370: fix a typo s/spififib/spdifib	2019-10-16 14:12:55 +02:00
cirrus	pinctrl: madera: Add configuration for Cirrus Logic CS47L92	2019-08-05 11:48:03 +02:00
freescale	pinctrl: freescale: imx: Add of_node_put() before return	2019-08-10 10:29:19 +02:00
intel	pinctrl: cherryview: Allocate IRQ chip dynamic	2019-10-25 12:54:10 +03:00
mediatek	This is the bulk of pin control changes for the v5.3 kernel	2019-07-13 15:02:27 -07:00
meson	pinctrl: meson-gxbb: Fix wrong pinning definition for uart_c	2019-09-13 14:40:41 +02:00
mvebu	pinctrl: armada-37xx: swap polarity on LED group	2019-10-09 10:00:58 +02:00
nomadik	pinctrl: nomadik: abx500: Add of_node_put() before return	2019-08-06 14:51:59 +02:00
nuvoton
pxa
qcom	This is the bulk of pin control changes for the v5.4 kernel	2019-09-19 14:19:33 -07:00
samsung
sh-pfc	pinctrl: sh-pfc: Unlock on error in sh_pfc_func_set_mux()	2019-09-12 12:59:43 +01:00
sirf
spear	pinctrl: spear: spear: Add of_node_put() before return	2019-08-06 16:18:49 +02:00
sprd	pinctrl: sprd: Add of_node_put() before return to prevent memory leak	2019-08-10 10:22:50 +02:00
stm32	pinctrl: stm32: stm32: Add of_node_put() before return	2019-08-10 10:21:51 +02:00
sunxi	pinctrl: sunxi: v3s: introduce support for V3	2019-08-05 12:35:29 +02:00
tegra	pinctrl: tegra: Flush pinctrl writes during resume	2019-08-21 09:00:16 +02:00
ti
uniphier	pinctrl: uniphier: Fix Pro5 SD pin-mux setting	2019-08-05 13:21:31 +02:00
vt8500
zte
core.c	pinctrl/gpio: Take MUX usage into account	2019-08-23 11:09:41 +02:00
core.h
devicetree.c	pinctrl: devicetree: Use strlen() instead of hardcoded number	2019-08-05 13:29:29 +02:00
devicetree.h
Kconfig
Makefile
pinconf-generic.c	This is the bulk of pin control changes for the v5.3 kernel	2019-07-13 15:02:27 -07:00
pinconf.c
pinconf.h
pinctrl-amd.c	pinctrl: amd: disable spurious-firing GPIO IRQs	2019-08-23 09:56:03 +02:00
pinctrl-amd.h
pinctrl-artpec6.c
pinctrl-as3722.c
pinctrl-at91-pio4.c
pinctrl-at91.c
pinctrl-at91.h
pinctrl-axp209.c
pinctrl-bm1880.c
pinctrl-coh901.c
pinctrl-coh901.h
pinctrl-da850-pupd.c
pinctrl-digicolor.c
pinctrl-falcon.c	pinctrl: falcon: Add of_node_put() before return	2019-08-06 14:50:04 +02:00
pinctrl-gemini.c
pinctrl-ingenic.c	pinctrl: Ingenic: Add pinctrl driver for X1500.	2019-07-29 23:42:08 +02:00
pinctrl-lantiq.c
pinctrl-lantiq.h
pinctrl-lpc18xx.c
pinctrl-max77620.c
pinctrl-mcp23s08.c
pinctrl-ocelot.c
pinctrl-oxnas.c	pinctrl: Remove dev_err() usage after platform_get_irq()	2019-08-05 13:24:06 +02:00
pinctrl-palmas.c
pinctrl-pic32.c	pinctrl: Remove dev_err() usage after platform_get_irq()	2019-08-05 13:24:06 +02:00
pinctrl-pic32.h
pinctrl-pistachio.c
pinctrl-rk805.c	pinctrl: rk805: Make structures constant	2019-08-21 09:00:16 +02:00
pinctrl-rockchip.c	pinctrl: rockchip: Mark expected switch fall-through	2019-08-05 12:32:27 +02:00
pinctrl-rza1.c	pinctrl: rza1: Add of_node_put() before return	2019-08-23 09:08:10 +02:00
pinctrl-rza2.c	pinctrl: rza2: Include the appropriate headers	2019-08-23 09:08:10 +02:00
pinctrl-rzn1.c	pinctrl: rzn1: Add of_node_put() before return	2019-08-05 09:23:57 +02:00
pinctrl-single.c
pinctrl-st.c	pinctrl: st: Add of_node_put() before return	2019-08-21 12:04:35 +02:00
pinctrl-stmfx.c	pinctrl: stmfx: fix valid_mask init sequence	2019-11-07 10:06:46 +01:00
pinctrl-sx150x.c
pinctrl-tb10x.c	This is the bulk of pin control changes for the v5.3 kernel	2019-07-13 15:02:27 -07:00
pinctrl-u300.c
pinctrl-utils.c
pinctrl-utils.h
pinctrl-xway.c	pinctrl: xway: Use devm_kasprintf() instead of fixed buffer formatting	2019-08-05 13:31:17 +02:00
pinctrl-zynq.c
pinmux.c	pinctrl/gpio: Take MUX usage into account	2019-08-23 11:09:41 +02:00
pinmux.h	pinctrl/gpio: Take MUX usage into account	2019-08-23 11:09:41 +02:00