forked from luck/tmp_suning_uos_patched
b24413180f
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
175 lines
4.4 KiB
C
175 lines
4.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* misc.c
|
|
*
|
|
* This is a collection of several routines from gzip-1.0.3
|
|
* adapted for Linux.
|
|
*
|
|
* malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
|
|
*
|
|
* Modified for ARM Linux by Russell King
|
|
*
|
|
* Nicolas Pitre <nico@visuaide.com> 1999/04/14 :
|
|
* For this code to run directly from Flash, all constant variables must
|
|
* be marked with 'const' and all other variables initialized at run-time
|
|
* only. This way all non constant variables will end up in the bss segment,
|
|
* which should point to addresses in RAM and cleared to 0 on start.
|
|
* This allows for a much quicker boot time.
|
|
*
|
|
* Modified for Alpha, from the ARM version, by Jay Estabrook 2003.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/uaccess.h>
|
|
|
|
#define memzero(s,n) memset ((s),0,(n))
|
|
#define puts srm_printk
|
|
extern long srm_printk(const char *, ...)
|
|
__attribute__ ((format (printf, 1, 2)));
|
|
|
|
/*
|
|
* gzip delarations
|
|
*/
|
|
#define OF(args) args
|
|
#define STATIC static
|
|
|
|
typedef unsigned char uch;
|
|
typedef unsigned short ush;
|
|
typedef unsigned long ulg;
|
|
|
|
#define WSIZE 0x8000 /* Window size must be at least 32k, */
|
|
/* and a power of two */
|
|
|
|
static uch *inbuf; /* input buffer */
|
|
static uch *window; /* Sliding window buffer */
|
|
|
|
static unsigned insize; /* valid bytes in inbuf */
|
|
static unsigned inptr; /* index of next byte to be processed in inbuf */
|
|
static unsigned outcnt; /* bytes in output buffer */
|
|
|
|
/* gzip flag byte */
|
|
#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
|
|
#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
|
|
#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
|
|
#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
|
|
#define COMMENT 0x10 /* bit 4 set: file comment present */
|
|
#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
|
|
#define RESERVED 0xC0 /* bit 6,7: reserved */
|
|
|
|
#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
|
|
|
|
/* Diagnostic functions */
|
|
#ifdef DEBUG
|
|
# define Assert(cond,msg) {if(!(cond)) error(msg);}
|
|
# define Trace(x) fprintf x
|
|
# define Tracev(x) {if (verbose) fprintf x ;}
|
|
# define Tracevv(x) {if (verbose>1) fprintf x ;}
|
|
# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
|
|
# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
|
|
#else
|
|
# define Assert(cond,msg)
|
|
# define Trace(x)
|
|
# define Tracev(x)
|
|
# define Tracevv(x)
|
|
# define Tracec(c,x)
|
|
# define Tracecv(c,x)
|
|
#endif
|
|
|
|
static int fill_inbuf(void);
|
|
static void flush_window(void);
|
|
static void error(char *m);
|
|
|
|
static char *input_data;
|
|
static int input_data_size;
|
|
|
|
static uch *output_data;
|
|
static ulg output_ptr;
|
|
static ulg bytes_out;
|
|
|
|
static void error(char *m);
|
|
static void gzip_mark(void **);
|
|
static void gzip_release(void **);
|
|
|
|
extern int end;
|
|
static ulg free_mem_ptr;
|
|
static ulg free_mem_end_ptr;
|
|
|
|
#define HEAP_SIZE 0x3000
|
|
|
|
#include "../../../lib/inflate.c"
|
|
|
|
/* ===========================================================================
|
|
* Fill the input buffer. This is called only when the buffer is empty
|
|
* and at least one byte is really needed.
|
|
*/
|
|
int fill_inbuf(void)
|
|
{
|
|
if (insize != 0)
|
|
error("ran out of input data");
|
|
|
|
inbuf = input_data;
|
|
insize = input_data_size;
|
|
|
|
inptr = 1;
|
|
return inbuf[0];
|
|
}
|
|
|
|
/* ===========================================================================
|
|
* Write the output window window[0..outcnt-1] and update crc and bytes_out.
|
|
* (Used for the decompressed data only.)
|
|
*/
|
|
void flush_window(void)
|
|
{
|
|
ulg c = crc;
|
|
unsigned n;
|
|
uch *in, *out, ch;
|
|
|
|
in = window;
|
|
out = &output_data[output_ptr];
|
|
for (n = 0; n < outcnt; n++) {
|
|
ch = *out++ = *in++;
|
|
c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
|
|
}
|
|
crc = c;
|
|
bytes_out += (ulg)outcnt;
|
|
output_ptr += (ulg)outcnt;
|
|
outcnt = 0;
|
|
/* puts("."); */
|
|
}
|
|
|
|
static void error(char *x)
|
|
{
|
|
puts("\n\n");
|
|
puts(x);
|
|
puts("\n\n -- System halted");
|
|
|
|
while(1); /* Halt */
|
|
}
|
|
|
|
unsigned int
|
|
decompress_kernel(void *output_start,
|
|
void *input_start,
|
|
size_t ksize,
|
|
size_t kzsize)
|
|
{
|
|
output_data = (uch *)output_start;
|
|
input_data = (uch *)input_start;
|
|
input_data_size = kzsize; /* use compressed size */
|
|
|
|
/* FIXME FIXME FIXME */
|
|
free_mem_ptr = (ulg)output_start + ksize;
|
|
free_mem_end_ptr = (ulg)output_start + ksize + 0x200000;
|
|
/* FIXME FIXME FIXME */
|
|
|
|
/* put in temp area to reduce initial footprint */
|
|
window = malloc(WSIZE);
|
|
|
|
makecrc();
|
|
/* puts("Uncompressing Linux..."); */
|
|
gunzip();
|
|
/* puts(" done, booting the kernel.\n"); */
|
|
return output_ptr;
|
|
}
|