forked from luck/tmp_suning_uos_patched
b293fca43b
This tag contains the core RISC-V Linux port, which has been through
nine rounds of review on various mailing lists. The port is not
complete: there's some cleanup patches moving through the review
process, a whole bunch of drivers that need some work, and a lot of
feature additions that will be needed.
The patches contained in this tag have been through nine rounds of
review on the various mailing lists. I have some outstanding cleanup
patches, but since there's been so much review on these patches I
thought it would be best to submit them as-is and then submit explicit
cleanup patches so everyone can review them. This first patch set is
big enough that it's a bit of a pain to constantly rewrite, and it's
caused a few headaches with various contributors.
The port is definately a work in progress. While what's there builds
and boots with 4.14, it's a bit hard to actually see anything happen
because there are no device drivers yet. I maintain a staging branch
that contains all the device drivers and cleanup that actually works,
but those patches won't all be ready for a while. I'd like to get what
we currently have into your tree so everyone can start working from a
single base -- of particular importance is allowing the glibc
upstreaming process to proceed so we can sort out any possibly lingering
user-visible ABI problems we might have.
Copied below is the ChangeLog that contains the history of this patch
set:
(v9) As per suggestions on our v8 patch set, I've split the core architecture code
out from our drivers and would like to submit this patch set to be included
into linux-next, with the goal being to be merged in during the next merge
window. This patch set is based on 4.14-rc2, but if it's better to have it
based on something else then I can change it around.
This patch set contains just the core arch code for RISC-V, so while it builds
an nominally boots, you can't print or take an interrupt so it's not that
useful. If you're looking to actually boot a system it would probably be
better to use the full patch set listed below.
We've collected a handful of tags from reviewers, and the remainder of the
patch set only got minimal feedback last time. Here's what changed:
* We now use the device tree to initialize the timer driver so it's less
tighly coupled with the arch port.
* I cleaned up the defconfigs -- there's actually now just one, and it's
empty. For now I think we're OK with what the kernel sets as defaults, but
I anticipate we'll begin to expand this as people start to use the port
more.
* The VDSO symbols version is sane.
* We WFI while spinning in the boot loop.
* A handful of comments have been added.
While there are still a handful of FIXMEs in this patch set, we've started to
get enough interest from various users and contributors that maintaining an out
of tree patch set is starting to become a big burden. Hopefully the patches
are good enough to merge now, which will at least get everyone working in a
more reasonable manner as we clean up the remaining issues.
This patch set is also availiable on github
https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v9-arch
as is the entire patch set necessary to get a more functional RISC-V system up
and running, including a handful of patches that aren't ready for upstream yet.
https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v9
Hopefully I've managed to get everyone's feedback
Here's the change highlights from the whole patch set:
(v8) I know it may not be the ideal time to submit a patch set right now, as
it's the middle of the merge window, but things have calmed down quite a bit in
the last month so I thought it would be good to get everyone on the same page.
There's been a handful of changes since the last patch set, but most of them
are fairly minor:
* We changed PAGE_OFFSET to allowing mapping more physical memory on 64-bit
systems. This is user configurable, as it triggers a different code model
that generates slightly less efficient code.
* The device tree binding documentation is back, I'd managed to lose it at some
point.
* We now pass the atomic64 test suite. The SBI timer driver has been
* refactored.
(v7) It's been a while since my last patch set, but the changes han been fairly
minimal:
* The PCI cleanup patches have been dropped, we'll do them as a separate patch
set later.
* We've the Kconfig entries from CONFIG_ISA_* to CONFIG_RISCV_ISA_*, to make
grep easier.
* There have been a handful of memory model related tweaks in I/O land,
particularly relating the PCI and the upcoming platform specification.
There are significant comments in the relevant files. This is still a WIP,
but I think we're close to getting as good as we're going to get until we
end up with some more specifications.
(v6) As it's been only a day since the v5 patch set, the changes are pretty
minimal:
* The patch set is now based on linux-next/master, which I believe is a better
base now that we're getting closer to upstream.
* EARLY_PRINTK is no longer an option. Since the SBI console is reasonable,
there's no penalty to enabling it (and thus no benefit to disabling it).
* The mmap syscalls were refactored a bit.
(v5) Things have really started to calm down, so this is fairly similar to the
v4 patch set. The most interesting changes include:
* We've moved back to a single patch set.
* SMP support has been fixed, I was accidentally running on a non-SMP
configuration. There were various mistakes all over the tree as a result of
this.
* The cmpxchg syscalls have been removed, as they were deemed a bad idea. As
a result, RISC-V Linux systems mandate the A extension. The corresponding
Kconfig entry to enable builds on non-A systems has been removed.
* A few more atomic fixes: mostly fence changes, but those resulted in a
handful of additional macros that were no longer necessary.
* riscv_early_sie has been removed.
(v4) There have only been a few changes since the v3 patch set:
* The cmpxchg64 syscall is no longer enabled on 32-bit systems. It's not
possible to provide this on SMP systems, and it's not necessary as glibc
knows not to call it.
* We provide a ELF_HWCAP so users can determine the ISA of the machine the
kernel is running on.
* The multi-line comments are in a better form.
* There were a handful of headers that could be replaced with the asm-generic
versions, and a few unnecessary definitions.
* We no longer use printk, but instead use pr_*.
* A few Kconfig and defconfig entries have been cleaned up.
(v3) A highlight of the changes since the v2 patch set includes:
* We've split out all our drivers into separate patch sets, which I've already
sent out to the relevant maintainers. I haven't included those patches in
this patch set, but some of them are necessary to build our port. A git
tree that contains all our patch sets merged together lives at
<https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v3>.
* The patch set is now split up differently: rather than being split per
directory it is split per topic. Hopefully this will make it easier to
review the port on the mailing list. The split is a bit rough, so you
probably still want to look at the patch set as a whole.
* atomic.h has been completely rewritten and is hopefully now correct. I've
attempted to sanitize the various other memory model related code as well,
and I think it should all be sane now aside from a handful of FIXMEs
commented in the code.
* We've changed the cmpexchg syscall to always exist and to not be
multiplexed. There is also a VDSO entry for compare and exchange, which
allows kernels with the A extension to execute user code without the A
extension reasonably fast.
* Our user-visible register state now contains enough space for the Q
extension for 128-bit floating point, as well as a few words to allow
extensibility to future ISA extensions like the eventual V extension for
vectors.
* A handful of driver cleanups, but these have been split into separate patch
sets now so I won't duplicate them here.
(v2) A highlight of the changes since the v1 patch set includes:
* We've split out our drivers into the right places, which means now there's
a lot more patches. I'll be submitting these patches to various subsystem
maintainers and including them in any future RISC-V patch sets until
they've been merged.
* The SBI console driver has been completely rewritten to use the HVC helpers
and is now significantly smaller.
* We've begun to use weaker barriers as opposed to just the big "fence".
There's still some work to do here, specifically:
- We need fences in the relaxed MMIO functions.
- The non-relaxed MMIO functions are missing R/W bits on their fences.
- Many AMOs need the aq and rl bits set.
* We now have thread_info in task_struct. As a result, sscratch now contains
TP instead of SP. This was necessary because thread_info is no longer on
the stack.
* A few shared routines have been added that we use instead of creating
another arch copy.
-----BEGIN PGP SIGNATURE-----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=xDIk
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux
Pull RISC-V architecture support from Palmer Dabbelt:
"This contains the core RISC-V Linux port, which has been through nine
rounds of review on various mailing lists. The port is not complete:
there's some cleanup patches moving through the review process, a
whole bunch of drivers that need some work, and a lot of feature
additions that will be needed.
The patches contained in this tag have been through nine rounds of
review on the various mailing lists. I have some outstanding cleanup
patches, but since there's been so much review on these patches I
thought it would be best to submit them as-is and then submit explicit
cleanup patches so everyone can review them. This first patch set is
big enough that it's a bit of a pain to constantly rewrite, and it's
caused a few headaches with various contributors.
The port is definately a work in progress. While what's there builds
and boots with 4.14, it's a bit hard to actually see anything happen
because there are no device drivers yet. I maintain a staging branch
that contains all the device drivers and cleanup that actually works,
but those patches won't all be ready for a while. I'd like to get what
we currently have into your tree so everyone can start working from a
single base -- of particular importance is allowing the glibc
upstreaming process to proceed so we can sort out any possibly
lingering user-visible ABI problems we might have.
Copied below is the ChangeLog that contains the history of this patch
set:
(v9) As per suggestions on our v8 patch set, I've split the core
architecture code out from our drivers and would like to submit
this patch set to be included into linux-next, with the goal
being to be merged in during the next merge window. This patch
set is based on 4.14-rc2, but if it's better to have it based on
something else then I can change it around.
This patch set contains just the core arch code for RISC-V, so
while it builds an nominally boots, you can't print or take an
interrupt so it's not that useful. If you're looking to actually
boot a system it would probably be better to use the full patch
set listed below.
We've collected a handful of tags from reviewers, and the
remainder of the patch set only got minimal feedback last time.
Here's what changed:
- We now use the device tree to initialize the timer driver so
it's less tighly coupled with the arch port.
- I cleaned up the defconfigs -- there's actually now just one,
and it's empty. For now I think we're OK with what the kernel
sets as defaults, but I anticipate we'll begin to expand this
as people start to use the port more.
- The VDSO symbols version is sane.
- We WFI while spinning in the boot loop.
- A handful of comments have been added.
While there are still a handful of FIXMEs in this patch set,
we've started to get enough interest from various users and
contributors that maintaining an out of tree patch set is
starting to become a big burden. Hopefully the patches are good
enough to merge now, which will at least get everyone working in
a more reasonable manner as we clean up the remaining issues.
(v8) I know it may not be the ideal time to submit a patch set right
now, as it's the middle of the merge window, but things have
calmed down quite a bit in the last month so I thought it would
be good to get everyone on the same page. There's been a handful
of changes since the last patch set, but most of them are fairly
minor:
- We changed PAGE_OFFSET to allowing mapping more physical
memory on 64-bit systems. This is user configurable, as it
triggers a different code model that generates slightly less
efficient code.
- The device tree binding documentation is back, I'd managed to
lose it at some point.
- We now pass the atomic64 test suite
- The SBI timer driver has been refactored.
(v7) It's been a while since my last patch set, but the changes han
been fairly minimal:
- The PCI cleanup patches have been dropped, we'll do them as a
separate patch set later.
- We've the Kconfig entries from CONFIG_ISA_* to
CONFIG_RISCV_ISA_*, to make grep easier.
- There have been a handful of memory model related tweaks in
I/O land, particularly relating the PCI and the upcoming
platform specification. There are significant comments in the
relevant files. This is still a WIP, but I think we're close
to getting as good as we're going to get until we end up with
some more specifications.
(v6) As it's been only a day since the v5 patch set, the changes are
pretty minimal:
- The patch set is now based on linux-next/master, which I
believe is a better base now that we're getting closer to
upstream.
- EARLY_PRINTK is no longer an option. Since the SBI console is
reasonable, there's no penalty to enabling it (and thus no
benefit to disabling it).
- The mmap syscalls were refactored a bit.
(v5) Things have really started to calm down, so this is fairly
similar to the v4 patch set. The most interesting changes
include:
- We've moved back to a single patch set.
- SMP support has been fixed, I was accidentally running on a
non-SMP configuration. There were various mistakes all over
the tree as a result of this.
- The cmpxchg syscalls have been removed, as they were deemed a
bad idea. As a result, RISC-V Linux systems mandate the A
extension. The corresponding Kconfig entry to enable builds
on non-A systems has been removed.
- A few more atomic fixes: mostly fence changes, but those
resulted in a handful of additional macros that were no
longer necessary.
- riscv_early_sie has been removed.
(v4) There have only been a few changes since the v3 patch set:
- The cmpxchg64 syscall is no longer enabled on 32-bit systems.
It's not possible to provide this on SMP systems, and it's
not necessary as glibc knows not to call it.
- We provide a ELF_HWCAP so users can determine the ISA of the
machine the kernel is running on.
- The multi-line comments are in a better form.
- There were a handful of headers that could be replaced with
the asm-generic versions, and a few unnecessary definitions.
- We no longer use printk, but instead use pr_*.
- A few Kconfig and defconfig entries have been cleaned up.
(v3) A highlight of the changes since the v2 patch set includes:
- We've split out all our drivers into separate patch sets,
which I've already sent out to the relevant maintainers. I
haven't included those patches in this patch set, but some of
them are necessary to build our port.
- The patch set is now split up differently: rather than being
split per directory it is split per topic. Hopefully this
will make it easier to review the port on the mailing list.
The split is a bit rough, so you probably still want to look
at the patch set as a whole.
- atomic.h has been completely rewritten and is hopefully now
correct. I've attempted to sanitize the various other memory
model related code as well, and I think it should all be sane
now aside from a handful of FIXMEs commented in the code.
- We've changed the cmpexchg syscall to always exist and to not
be multiplexed. There is also a VDSO entry for compare and
exchange, which allows kernels with the A extension to
execute user code without the A extension reasonably fast.
- Our user-visible register state now contains enough space for
the Q extension for 128-bit floating point, as well as a few
words to allow extensibility to future ISA extensions like
the eventual V extension for vectors.
- A handful of driver cleanups, but these have been split into
separate patch sets now so I won't duplicate them here.
(v2) A highlight of the changes since the v1 patch set includes:
- We've split out our drivers into the right places, which
means now there's a lot more patches. I'll be submitting
these patches to various subsystem maintainers and including
them in any future RISC-V patch sets until they've been
merged.
- The SBI console driver has been completely rewritten to use
the HVC helpers and is now significantly smaller.
- We've begun to use weaker barriers as opposed to just the big
"fence". There's still some work to do here, specifically:
- We need fences in the relaxed MMIO functions.
- The non-relaxed MMIO functions are missing R/W bits on their fences.
- Many AMOs need the aq and rl bits set.
- We now have thread_info in task_struct. As a result, sscratch
now contains TP instead of SP. This was necessary because
thread_info is no longer on the stack.
- A few shared routines have been added that we use instead of
creating another arch copy"
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
* tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
RISC-V: Build Infrastructure
RISC-V: User-facing API
RISC-V: Paging and MMU
RISC-V: Device, timer, IRQs, and the SBI
RISC-V: Task implementation
RISC-V: ELF and module implementation
RISC-V: Generic library routines and assembly
RISC-V: Atomic and Locking Code
RISC-V: Init and Halt Code
dt-bindings: RISC-V CPU Bindings
lib: Add shared copies of some GCC library routines
MAINTAINERS: Add RISC-V
259 lines
8.2 KiB
Makefile
259 lines
8.2 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Makefile for some libs needed in the kernel.
|
|
#
|
|
|
|
ifdef CONFIG_FUNCTION_TRACER
|
|
ORIG_CFLAGS := $(KBUILD_CFLAGS)
|
|
KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS))
|
|
endif
|
|
|
|
# These files are disabled because they produce lots of non-interesting and/or
|
|
# flaky coverage that is not a function of syscall inputs. For example,
|
|
# rbtree can be global and individual rotations don't correlate with inputs.
|
|
KCOV_INSTRUMENT_string.o := n
|
|
KCOV_INSTRUMENT_rbtree.o := n
|
|
KCOV_INSTRUMENT_list_debug.o := n
|
|
KCOV_INSTRUMENT_debugobjects.o := n
|
|
KCOV_INSTRUMENT_dynamic_debug.o := n
|
|
|
|
lib-y := ctype.o string.o vsprintf.o cmdline.o \
|
|
rbtree.o radix-tree.o dump_stack.o timerqueue.o\
|
|
idr.o int_sqrt.o extable.o \
|
|
sha1.o chacha20.o irq_regs.o argv_split.o \
|
|
flex_proportions.o ratelimit.o show_mem.o \
|
|
is_single_threaded.o plist.o decompress.o kobject_uevent.o \
|
|
earlycpio.o seq_buf.o siphash.o \
|
|
nmi_backtrace.o nodemask.o win_minmax.o
|
|
|
|
lib-$(CONFIG_MMU) += ioremap.o
|
|
lib-$(CONFIG_SMP) += cpumask.o
|
|
lib-$(CONFIG_DMA_NOOP_OPS) += dma-noop.o
|
|
lib-$(CONFIG_DMA_VIRT_OPS) += dma-virt.o
|
|
|
|
lib-y += kobject.o klist.o
|
|
obj-y += lockref.o
|
|
|
|
obj-y += bcd.o div64.o sort.o parser.o debug_locks.o random32.o \
|
|
bust_spinlocks.o kasprintf.o bitmap.o scatterlist.o \
|
|
gcd.o lcm.o list_sort.o uuid.o flex_array.o iov_iter.o clz_ctz.o \
|
|
bsearch.o find_bit.o llist.o memweight.o kfifo.o \
|
|
percpu-refcount.o percpu_ida.o rhashtable.o reciprocal_div.o \
|
|
once.o refcount.o usercopy.o errseq.o
|
|
obj-y += string_helpers.o
|
|
obj-$(CONFIG_TEST_STRING_HELPERS) += test-string_helpers.o
|
|
obj-y += hexdump.o
|
|
obj-$(CONFIG_TEST_HEXDUMP) += test_hexdump.o
|
|
obj-y += kstrtox.o
|
|
obj-$(CONFIG_TEST_BPF) += test_bpf.o
|
|
obj-$(CONFIG_TEST_FIRMWARE) += test_firmware.o
|
|
obj-$(CONFIG_TEST_SYSCTL) += test_sysctl.o
|
|
obj-$(CONFIG_TEST_HASH) += test_hash.o test_siphash.o
|
|
obj-$(CONFIG_TEST_KASAN) += test_kasan.o
|
|
obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o
|
|
obj-$(CONFIG_TEST_LIST_SORT) += test_list_sort.o
|
|
obj-$(CONFIG_TEST_LKM) += test_module.o
|
|
obj-$(CONFIG_TEST_RHASHTABLE) += test_rhashtable.o
|
|
obj-$(CONFIG_TEST_SORT) += test_sort.o
|
|
obj-$(CONFIG_TEST_USER_COPY) += test_user_copy.o
|
|
obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_keys.o
|
|
obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_key_base.o
|
|
obj-$(CONFIG_TEST_PRINTF) += test_printf.o
|
|
obj-$(CONFIG_TEST_BITMAP) += test_bitmap.o
|
|
obj-$(CONFIG_TEST_UUID) += test_uuid.o
|
|
obj-$(CONFIG_TEST_PARMAN) += test_parman.o
|
|
obj-$(CONFIG_TEST_KMOD) += test_kmod.o
|
|
obj-$(CONFIG_TEST_DEBUG_VIRTUAL) += test_debug_virtual.o
|
|
|
|
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
|
|
CFLAGS_kobject.o += -DDEBUG
|
|
CFLAGS_kobject_uevent.o += -DDEBUG
|
|
endif
|
|
|
|
obj-$(CONFIG_DEBUG_INFO_REDUCED) += debug_info.o
|
|
CFLAGS_debug_info.o += $(call cc-option, -femit-struct-debug-detailed=any)
|
|
|
|
obj-$(CONFIG_GENERIC_IOMAP) += iomap.o
|
|
obj-$(CONFIG_GENERIC_PCI_IOMAP) += pci_iomap.o
|
|
obj-$(CONFIG_HAS_IOMEM) += iomap_copy.o devres.o
|
|
obj-$(CONFIG_CHECK_SIGNATURE) += check_signature.o
|
|
obj-$(CONFIG_DEBUG_LOCKING_API_SELFTESTS) += locking-selftest.o
|
|
|
|
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
|
|
|
|
obj-$(CONFIG_BTREE) += btree.o
|
|
obj-$(CONFIG_INTERVAL_TREE) += interval_tree.o
|
|
obj-$(CONFIG_ASSOCIATIVE_ARRAY) += assoc_array.o
|
|
obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o
|
|
obj-$(CONFIG_DEBUG_LIST) += list_debug.o
|
|
obj-$(CONFIG_DEBUG_OBJECTS) += debugobjects.o
|
|
|
|
ifneq ($(CONFIG_HAVE_DEC_LOCK),y)
|
|
lib-y += dec_and_lock.o
|
|
endif
|
|
|
|
obj-$(CONFIG_BITREVERSE) += bitrev.o
|
|
obj-$(CONFIG_RATIONAL) += rational.o
|
|
obj-$(CONFIG_CRC_CCITT) += crc-ccitt.o
|
|
obj-$(CONFIG_CRC16) += crc16.o
|
|
obj-$(CONFIG_CRC_T10DIF)+= crc-t10dif.o
|
|
obj-$(CONFIG_CRC_ITU_T) += crc-itu-t.o
|
|
obj-$(CONFIG_CRC32) += crc32.o
|
|
obj-$(CONFIG_CRC32_SELFTEST) += crc32test.o
|
|
obj-$(CONFIG_CRC4) += crc4.o
|
|
obj-$(CONFIG_CRC7) += crc7.o
|
|
obj-$(CONFIG_LIBCRC32C) += libcrc32c.o
|
|
obj-$(CONFIG_CRC8) += crc8.o
|
|
obj-$(CONFIG_XXHASH) += xxhash.o
|
|
obj-$(CONFIG_GENERIC_ALLOCATOR) += genalloc.o
|
|
|
|
obj-$(CONFIG_842_COMPRESS) += 842/
|
|
obj-$(CONFIG_842_DECOMPRESS) += 842/
|
|
obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate/
|
|
obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/
|
|
obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
|
|
obj-$(CONFIG_BCH) += bch.o
|
|
obj-$(CONFIG_LZO_COMPRESS) += lzo/
|
|
obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
|
|
obj-$(CONFIG_LZ4_COMPRESS) += lz4/
|
|
obj-$(CONFIG_LZ4HC_COMPRESS) += lz4/
|
|
obj-$(CONFIG_LZ4_DECOMPRESS) += lz4/
|
|
obj-$(CONFIG_ZSTD_COMPRESS) += zstd/
|
|
obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/
|
|
obj-$(CONFIG_XZ_DEC) += xz/
|
|
obj-$(CONFIG_RAID6_PQ) += raid6/
|
|
|
|
lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
|
|
lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
|
|
lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o
|
|
lib-$(CONFIG_DECOMPRESS_XZ) += decompress_unxz.o
|
|
lib-$(CONFIG_DECOMPRESS_LZO) += decompress_unlzo.o
|
|
lib-$(CONFIG_DECOMPRESS_LZ4) += decompress_unlz4.o
|
|
|
|
obj-$(CONFIG_TEXTSEARCH) += textsearch.o
|
|
obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o
|
|
obj-$(CONFIG_TEXTSEARCH_BM) += ts_bm.o
|
|
obj-$(CONFIG_TEXTSEARCH_FSM) += ts_fsm.o
|
|
obj-$(CONFIG_SMP) += percpu_counter.o
|
|
obj-$(CONFIG_AUDIT_GENERIC) += audit.o
|
|
obj-$(CONFIG_AUDIT_COMPAT_GENERIC) += compat_audit.o
|
|
|
|
obj-$(CONFIG_SWIOTLB) += swiotlb.o
|
|
obj-$(CONFIG_IOMMU_HELPER) += iommu-helper.o iommu-common.o
|
|
obj-$(CONFIG_FAULT_INJECTION) += fault-inject.o
|
|
obj-$(CONFIG_NOTIFIER_ERROR_INJECTION) += notifier-error-inject.o
|
|
obj-$(CONFIG_PM_NOTIFIER_ERROR_INJECT) += pm-notifier-error-inject.o
|
|
obj-$(CONFIG_NETDEV_NOTIFIER_ERROR_INJECT) += netdev-notifier-error-inject.o
|
|
obj-$(CONFIG_MEMORY_NOTIFIER_ERROR_INJECT) += memory-notifier-error-inject.o
|
|
obj-$(CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT) += \
|
|
of-reconfig-notifier-error-inject.o
|
|
|
|
lib-$(CONFIG_GENERIC_BUG) += bug.o
|
|
|
|
obj-$(CONFIG_HAVE_ARCH_TRACEHOOK) += syscall.o
|
|
|
|
obj-$(CONFIG_DYNAMIC_DEBUG) += dynamic_debug.o
|
|
|
|
obj-$(CONFIG_NLATTR) += nlattr.o
|
|
|
|
obj-$(CONFIG_LRU_CACHE) += lru_cache.o
|
|
|
|
obj-$(CONFIG_DMA_API_DEBUG) += dma-debug.o
|
|
|
|
obj-$(CONFIG_GENERIC_CSUM) += checksum.o
|
|
|
|
obj-$(CONFIG_GENERIC_ATOMIC64) += atomic64.o
|
|
|
|
obj-$(CONFIG_ATOMIC64_SELFTEST) += atomic64_test.o
|
|
|
|
obj-$(CONFIG_CPU_RMAP) += cpu_rmap.o
|
|
|
|
obj-$(CONFIG_CORDIC) += cordic.o
|
|
|
|
obj-$(CONFIG_DQL) += dynamic_queue_limits.o
|
|
|
|
obj-$(CONFIG_GLOB) += glob.o
|
|
obj-$(CONFIG_GLOB_SELFTEST) += globtest.o
|
|
|
|
obj-$(CONFIG_MPILIB) += mpi/
|
|
obj-$(CONFIG_SIGNATURE) += digsig.o
|
|
|
|
lib-$(CONFIG_CLZ_TAB) += clz_tab.o
|
|
|
|
obj-$(CONFIG_DDR) += jedec_ddr_data.o
|
|
|
|
obj-$(CONFIG_GENERIC_STRNCPY_FROM_USER) += strncpy_from_user.o
|
|
obj-$(CONFIG_GENERIC_STRNLEN_USER) += strnlen_user.o
|
|
|
|
obj-$(CONFIG_GENERIC_NET_UTILS) += net_utils.o
|
|
|
|
obj-$(CONFIG_SG_SPLIT) += sg_split.o
|
|
obj-$(CONFIG_SG_POOL) += sg_pool.o
|
|
obj-$(CONFIG_STMP_DEVICE) += stmp_device.o
|
|
obj-$(CONFIG_IRQ_POLL) += irq_poll.o
|
|
|
|
obj-$(CONFIG_STACKDEPOT) += stackdepot.o
|
|
KASAN_SANITIZE_stackdepot.o := n
|
|
KCOV_INSTRUMENT_stackdepot.o := n
|
|
|
|
libfdt_files = fdt.o fdt_ro.o fdt_wip.o fdt_rw.o fdt_sw.o fdt_strerror.o \
|
|
fdt_empty_tree.o
|
|
$(foreach file, $(libfdt_files), \
|
|
$(eval CFLAGS_$(file) = -I$(src)/../scripts/dtc/libfdt))
|
|
lib-$(CONFIG_LIBFDT) += $(libfdt_files)
|
|
|
|
obj-$(CONFIG_RBTREE_TEST) += rbtree_test.o
|
|
obj-$(CONFIG_INTERVAL_TREE_TEST) += interval_tree_test.o
|
|
|
|
obj-$(CONFIG_PERCPU_TEST) += percpu_test.o
|
|
|
|
obj-$(CONFIG_ASN1) += asn1_decoder.o
|
|
|
|
obj-$(CONFIG_FONT_SUPPORT) += fonts/
|
|
|
|
obj-$(CONFIG_PRIME_NUMBERS) += prime_numbers.o
|
|
|
|
hostprogs-y := gen_crc32table
|
|
clean-files := crc32table.h
|
|
|
|
$(obj)/crc32.o: $(obj)/crc32table.h
|
|
|
|
quiet_cmd_crc32 = GEN $@
|
|
cmd_crc32 = $< > $@
|
|
|
|
$(obj)/crc32table.h: $(obj)/gen_crc32table
|
|
$(call cmd,crc32)
|
|
|
|
#
|
|
# Build a fast OID lookip registry from include/linux/oid_registry.h
|
|
#
|
|
obj-$(CONFIG_OID_REGISTRY) += oid_registry.o
|
|
|
|
$(obj)/oid_registry.o: $(obj)/oid_registry_data.c
|
|
|
|
$(obj)/oid_registry_data.c: $(srctree)/include/linux/oid_registry.h \
|
|
$(src)/build_OID_registry
|
|
$(call cmd,build_OID_registry)
|
|
|
|
quiet_cmd_build_OID_registry = GEN $@
|
|
cmd_build_OID_registry = perl $(srctree)/$(src)/build_OID_registry $< $@
|
|
|
|
clean-files += oid_registry_data.c
|
|
|
|
obj-$(CONFIG_UCS2_STRING) += ucs2_string.o
|
|
obj-$(CONFIG_UBSAN) += ubsan.o
|
|
|
|
UBSAN_SANITIZE_ubsan.o := n
|
|
|
|
obj-$(CONFIG_SBITMAP) += sbitmap.o
|
|
|
|
obj-$(CONFIG_PARMAN) += parman.o
|
|
|
|
# GCC library routines
|
|
obj-$(CONFIG_GENERIC_ASHLDI3) += ashldi3.o
|
|
obj-$(CONFIG_GENERIC_ASHRDI3) += ashrdi3.o
|
|
obj-$(CONFIG_GENERIC_LSHRDI3) += lshrdi3.o
|
|
obj-$(CONFIG_GENERIC_MULDI3) += muldi3.o
|
|
obj-$(CONFIG_GENERIC_CMPDI2) += cmpdi2.o
|
|
obj-$(CONFIG_GENERIC_UCMPDI2) += ucmpdi2.o
|