David Milburn 2dc0b46b5e libata: sata_down_spd_limit should return if driver has not recorded sstatus speed ... During hotplug, it is possible for 6Gbps link speed to be limited all the way down to 1.5 Gbps which may lead to a slower link speed when drive is re-connected. This behavior has been seen on a Intel Lewisburg SATA controller (8086:a1d2) with HGST HUH728080ALE600 drive where SATA link speed was limited to 1.5 Gbps and when re-connected the link came up 3.0 Gbps. This patch was retested on above configuration and showed the hotplugged link to come back online at max speed (6Gbps). I did not see the downgrade when testing on Intel C600/X79, but retested patched linux-4.14-rc5 kernel and didn't see any side effects from this change. Also, successfully retested hotplug on port multiplier 3Gbps link. tj: Minor comment updates. Signed-off-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>		2017-12-04 13:57:03 -08:00
..
acard-ahci.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
ahci_brcm.c	ata: ahci_brcm: Avoid writing to read-only registers	2017-06-22 16:13:00 -04:00
ahci_ceva.c	ata: ceva: Add SMMU support for SATA IP	2017-10-23 07:09:27 -07:00
ahci_da850.c	sata: ahci-da850: Fix some error handling paths in 'ahci_da850_probe()'	2017-08-16 07:38:27 -07:00
ahci_dm816.c	ata: ahci: add support for DaVinci DM816 SATA controller	2017-03-24 11:40:03 -04:00
ahci_imx.c	ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode.	2017-11-13 12:17:43 -08:00
ahci_mtk.c	ahci: mtk: Change driver name to ahci-mtk	2017-12-04 12:35:29 -08:00
ahci_mvebu.c
ahci_octeon.c	Delete redundant return value check of platform_get_resource()	2017-03-06 15:40:59 -05:00
ahci_platform.c	ata: ahci_platform: Add shutdown handler	2017-08-04 13:34:14 -07:00
ahci_qoriq.c	ahci: qoriq: refine port register configuration	2017-12-04 12:18:08 -08:00
ahci_seattle.c
ahci_st.c
ahci_sunxi.c
ahci_tegra.c
ahci_xgene.c
ahci.c	Merge branch 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata	2017-11-15 14:11:41 -08:00
ahci.h	ahci: Convert timers to use timer_setup()	2017-10-19 23:15:16 +02:00
ata_generic.c
ata_piix.c	ata_piix: Add Fujitsu-Siemens Lifebook S6120 to short cable IDs	2017-09-18 20:32:02 -07:00
Kconfig	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
libahci_platform.c	ata: mark expected switch fall-throughs	2017-10-23 07:06:09 -07:00
libahci.c	ahci: Convert timers to use timer_setup()	2017-10-19 23:15:16 +02:00
libata-acpi.c
libata-core.c	libata: sata_down_spd_limit should return if driver has not recorded sstatus speed	2017-12-04 13:57:03 -08:00
libata-eh.c	Merge branch 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata	2017-11-15 14:11:41 -08:00
libata-pmp.c
libata-scsi.c	libata: make static arrays const, reduces object code size	2017-09-19 11:53:11 -07:00
libata-sff.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
libata-trace.c
libata-transport.c	libata: transport: Remove circular dependency at free time	2017-03-06 15:24:48 -05:00
libata-transport.h	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
libata-zpodd.c	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
libata.h	Merge branch 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata	2017-11-15 14:11:41 -08:00
Makefile	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
pata_acpi.c
pata_ali.c
pata_amd.c	cs5536: add support for IDE controller variant	2017-08-11 10:35:07 -07:00
pata_arasan_cf.c
pata_artop.c	ata: pata_artop: remove redundant initialization of pio	2017-09-18 20:24:21 -07:00
pata_at32.c
pata_atiixp.c	Revert "pata_atiixp: Don't use unconnected secondary port on SB600/SB700"	2017-03-27 13:52:00 -04:00
pata_atp867x.c	ata: mark expected switch fall-throughs	2017-10-23 07:06:09 -07:00
pata_bf54x.c	ata: bf54x: cut drvdata assignment	2017-05-30 11:54:36 -04:00
pata_bk3710.c	pata_bk3710: clear status bits of BMISP on chipset initialization	2017-03-30 16:13:04 +05:30
pata_cmd64x.c
pata_cmd640.c
pata_cs5520.c
pata_cs5530.c
pata_cs5535.c
pata_cs5536.c	cs5536: add support for IDE controller variant	2017-08-11 10:35:07 -07:00
pata_cypress.c
pata_efar.c
pata_ep93xx.c	ata: ep93xx: cut drvdata assignment	2017-05-30 11:54:36 -04:00
pata_falcon.c
pata_ftide010.c	ata: ftide010: fix resource printing	2017-06-21 18:06:18 -04:00
pata_hpt3x2n.c
pata_hpt3x3.c
pata_hpt37x.c
pata_hpt366.c
pata_icside.c
pata_imx.c
pata_isapnp.c
pata_it821x.c
pata_it8213.c
pata_ixp4xx_cf.c
pata_jmicron.c
pata_legacy.c
pata_macio.c	ata: constify of_device_id structures	2017-03-06 15:18:01 -05:00
pata_marvell.c
pata_mpc52xx.c	ata: constify of_device_id structures	2017-03-06 15:18:01 -05:00
pata_mpiix.c
pata_netcell.c
pata_ninja32.c
pata_ns87410.c
pata_ns87415.c
pata_octeon_cf.c	pata_octeon_cf: use of_property_read_{bool|u32}()	2017-08-28 10:44:24 -07:00
pata_of_platform.c	ata: constify of_device_id structures	2017-03-06 15:18:01 -05:00
pata_oldpiix.c
pata_opti.c
pata_optidma.c
pata_palmld.c
pata_pcmcia.c
pata_pdc202xx_old.c
pata_pdc2027x.c	pata_pdc2027x : make pdc2027x_*_timing structures const	2017-11-27 11:46:26 -08:00
pata_piccolo.c
pata_platform.c
pata_pxa.c
pata_radisys.c
pata_rb532_cf.c	ata: rb532_cf: cut drvdata assignment	2017-05-30 11:54:37 -04:00
pata_rdc.c	ata: declare ata_port_info structures as const	2017-06-12 14:06:34 -04:00
pata_rz1000.c
pata_samsung_cf.c	ata: samsung_cf: cut drvdata assignment	2017-05-30 11:54:37 -04:00
pata_sc1200.c
pata_sch.c	ata: declare ata_port_info structures as const	2017-06-12 14:06:34 -04:00
pata_serverworks.c
pata_sil680.c
pata_sis.c
pata_sl82c105.c
pata_triflex.c
pata_via.c
pdc_adma.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_dwc_460ex.c	ata: sata_dwc_460ex: Propagate platform device ID to DMA driver	2017-11-13 12:17:11 -08:00
sata_fsl.c	ata: sata_fsl: cut drvdata assignment	2017-05-30 11:54:37 -04:00
sata_gemini.c	ata: sata_gemini: Introduce explicit IDE pin control	2017-08-11 10:32:09 -07:00
sata_gemini.h	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
sata_highbank.c
sata_inic162x.c	ata: declare ata_port_info structures as const	2017-06-12 14:06:34 -04:00
sata_mv.c	ata: mark expected switch fall-throughs	2017-10-23 07:06:09 -07:00
sata_nv.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_promise.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_promise.h	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_qstor.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_rcar.c	ata: sata_rcar: Use of_device_get_match_data() helper	2017-10-04 07:18:29 -07:00
sata_sil.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_sil24.c
sata_sis.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_svw.c	ata: Convert to using %pOF instead of full_name	2017-07-18 18:02:36 -04:00
sata_sx4.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_uli.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_via.c	sata_via: Enable optional hotplug on VT6420	2017-06-26 16:54:53 -04:00
sata_vsc.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sis.h	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00