forked from luck/tmp_suning_uos_patched
d0760b3bc8
The Atmel AT91SAM9263 processor includes many more integrated
peripherals than Atmel's previous ARM9-based AT91 processors, so this
has necessitated a few changes to the core AT91 support.
These changes are:
* The system peripheral I/O region we remap has increased from
0xFFFA0000..0xFFFFFFFF to 0xFFF78000..0xFFFFFFFF.
* The increased I/O region forces changes to entry-macro.S and
debug-macro.S due to ARM's limited immediate offset addressing
modes.
* Maximum number of GPIO banks increases to 5.
* 2 MMC controllers so the board-setup code needs to specify which
controller it wishes to use when calling at91_add_device_mmc().
Original patch from Nicolas Ferre.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
40 lines
1.1 KiB
ArmAsm
40 lines
1.1 KiB
ArmAsm
/*
|
|
* include/asm-arm/arch-at91/debug-macro.S
|
|
*
|
|
* Copyright (C) 2003-2005 SAN People
|
|
*
|
|
* Debugging macro include header
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <asm/hardware.h>
|
|
#include <asm/arch/at91_dbgu.h>
|
|
|
|
.macro addruart,rx
|
|
mrc p15, 0, \rx, c1, c0
|
|
tst \rx, #1 @ MMU enabled?
|
|
ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
|
|
ldrne \rx, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
|
|
.endm
|
|
|
|
.macro senduart,rd,rx
|
|
strb \rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)] @ Write to Transmitter Holding Register
|
|
.endm
|
|
|
|
.macro waituart,rd,rx
|
|
1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register
|
|
tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit
|
|
beq 1001b
|
|
.endm
|
|
|
|
.macro busyuart,rd,rx
|
|
1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register
|
|
tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete
|
|
beq 1001b
|
|
.endm
|
|
|