AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
bb97be23db
kernel_optimize_test/include/soc/tegra/bpmp-abi.h
Timo Alho 4bef358c90 soc/tegra: bpmp: Update ABI header 
Update the firmware header file to a more recent version. The major
changes in the new version are:

 * add a new MRQ for firmware version query ABI and deprecates the old
 * add ABI to query Tegra194 CPU frequency limits
 * add ABI to control subset of PCIE UPHY state

The new header contains also some editorial changes to the
documentation.

Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Sivaram Nair <sivaramn@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-11-08 12:49:26 +01:00

2706 lines
70 KiB
C
Raw Blame History

/*
* Copyright (c) 2014-2018, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _ABI_BPMP_ABI_H_
#define _ABI_BPMP_ABI_H_
#ifdef LK
#include <stdint.h>
#endif
#ifndef __ABI_PACKED
#define __ABI_PACKED __attribute__((packed))
#endif
#ifdef NO_GCC_EXTENSIONS
#define EMPTY char empty;
#define EMPTY_ARRAY 1
#else
#define EMPTY
#define EMPTY_ARRAY 0
#endif
#ifndef __UNION_ANON
#define __UNION_ANON
#endif
/**
* @file
*/
/**
* @defgroup MRQ MRQ Messages
* @brief Messages sent to/from BPMP via IPC
* @{
* @defgroup MRQ_Format Message Format
* @defgroup MRQ_Codes Message Request (MRQ) Codes
* @defgroup MRQ_Payloads Message Payloads
* @defgroup Error_Codes Error Codes
* @}
*/
/**
* @addtogroup MRQ_Format
* @{
* The CPU requests the BPMP to perform a particular service by
* sending it an IVC frame containing a single MRQ message. An MRQ
* message consists of a @ref mrq_request followed by a payload whose
* format depends on mrq_request::mrq.
*
* The BPMP processes the data and replies with an IVC frame (on the
* same IVC channel) containing and MRQ response. An MRQ response
* consists of a @ref mrq_response followed by a payload whose format
* depends on the associated mrq_request::mrq.
*
* A well-defined subset of the MRQ messages that the CPU sends to the
* BPMP can lead to BPMP eventually sending an MRQ message to the
* CPU. For example, when the CPU uses an #MRQ_THERMAL message to set
* a thermal trip point, the BPMP may eventually send a single
* #MRQ_THERMAL message of its own to the CPU indicating that the trip
* point has been crossed.
* @}
*/
/**
* @ingroup MRQ_Format
* @brief Header for an MRQ message
*
* Provides the MRQ number for the MRQ message: #mrq. The remainder of
* the MRQ message is a payload (immediately following the
* mrq_request) whose format depends on mrq.
*/
struct mrq_request {
/** @brief MRQ number of the request */
uint32_t mrq;
/**
* @brief Flags providing follow up directions to the receiver
*
* | Bit | Description |
* |-----|--------------------------------------------|
* | 1 | ring the sender's doorbell when responding |
* | 0 | should be 1 |
*/
uint32_t flags;
} __ABI_PACKED;
/**
* @ingroup MRQ_Format
* @brief Header for an MRQ response
*
* Provides an error code for the associated MRQ message. The
* remainder of the MRQ response is a payload (immediately following
* the mrq_response) whose format depends on the associated
* mrq_request::mrq
*/
struct mrq_response {
/** @brief Error code for the MRQ request itself */
int32_t err;
/** @brief Reserved for future use */
uint32_t flags;
} __ABI_PACKED;
/**
* @ingroup MRQ_Format
* Minimum needed size for an IPC message buffer
*/
#define MSG_MIN_SZ 128
/**
* @ingroup MRQ_Format
* Minimum size guaranteed for data in an IPC message buffer
*/
#define MSG_DATA_MIN_SZ 120
/**
* @ingroup MRQ_Codes
* @name Legal MRQ codes
* These are the legal values for mrq_request::mrq
* @{
*/
#define MRQ_PING 0
#define MRQ_QUERY_TAG 1
#define MRQ_MODULE_LOAD 4
#define MRQ_MODULE_UNLOAD 5
#define MRQ_TRACE_MODIFY 7
#define MRQ_WRITE_TRACE 8
#define MRQ_THREADED_PING 9
#define MRQ_MODULE_MAIL 11
#define MRQ_DEBUGFS 19
#define MRQ_RESET 20
#define MRQ_I2C 21
#define MRQ_CLK 22
#define MRQ_QUERY_ABI 23
#define MRQ_PG_READ_STATE 25
#define MRQ_PG_UPDATE_STATE 26
#define MRQ_THERMAL 27
#define MRQ_CPU_VHINT 28
#define MRQ_ABI_RATCHET 29
#define MRQ_EMC_DVFS_LATENCY 31
#define MRQ_TRACE_ITER 64
#define MRQ_RINGBUF_CONSOLE 65
#define MRQ_PG 66
#define MRQ_CPU_NDIV_LIMITS 67
#define MRQ_STRAP 68
#define MRQ_UPHY 69
#define MRQ_CPU_AUTO_CC3 70
#define MRQ_QUERY_FW_TAG 71
#define MRQ_FMON 72
#define MRQ_EC 73
#define MRQ_FBVOLT_STATUS 74
/** @} */
/**
* @ingroup MRQ_Codes
* @brief Maximum MRQ code to be sent by CPU software to
* BPMP. Subject to change in future
*/
#define MAX_CPU_MRQ_ID 74
/**
* @addtogroup MRQ_Payloads
* @{
* @defgroup Ping Ping
* @defgroup Query_Tag Query Tag
* @defgroup Module Loadable Modules
* @defgroup Trace Trace
* @defgroup Debugfs Debug File System
* @defgroup Reset Reset
* @defgroup I2C I2C
* @defgroup Clocks Clocks
* @defgroup ABI_info ABI Info
* @defgroup Powergating Power Gating
* @defgroup Thermal Thermal
* @defgroup Vhint CPU Voltage hint
* @defgroup EMC EMC
* @defgroup CPU NDIV Limits
* @defgroup RingbufConsole Ring Buffer Console
* @defgroup Strap Straps
* @defgroup UPHY UPHY
* @defgroup CC3 Auto-CC3
* @defgroup FMON FMON
* @defgroup EC EC
* @defgroup Fbvolt_status Fuse Burn Voltage Status
* @}
*/
/**
* @ingroup MRQ_Codes
* @def MRQ_PING
* @brief A simple ping
*
* * Platforms: All
* * Initiators: Any
* * Targets: Any
* * Request Payload: @ref mrq_ping_request
* * Response Payload: @ref mrq_ping_response
*
* @ingroup MRQ_Codes
* @def MRQ_THREADED_PING
* @brief A deeper ping
*
* * Platforms: All
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_ping_request
* * Response Payload: @ref mrq_ping_response
*
* Behavior is equivalent to a simple #MRQ_PING except that BPMP
* responds from a thread context (providing a slightly more robust
* sign of life).
*
*/
/**
* @ingroup Ping
* @brief Request with #MRQ_PING
*
* Used by the sender of an #MRQ_PING message to request a pong from
* recipient. The response from the recipient is computed based on
* #challenge.
*/
struct mrq_ping_request {
/** @brief Arbitrarily chosen value */
uint32_t challenge;
} __ABI_PACKED;
/**
* @ingroup Ping
* @brief Response to #MRQ_PING
*
* Sent in response to an #MRQ_PING message. #reply should be the
* mrq_ping_request challenge left shifted by 1 with the carry-bit
* dropped.
*
*/
struct mrq_ping_response {
/** @brief Response to the MRQ_PING challege */
uint32_t reply;
} __ABI_PACKED;
/**
* @ingroup MRQ_Codes
* @def MRQ_QUERY_TAG
* @brief Query BPMP firmware's tag (i.e. unique identifer)
*
* @deprecated Use #MRQ_QUERY_FW_TAG instead.
*
* * Platforms: All
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_query_tag_request
* * Response Payload: N/A
*
*/
/**
* @ingroup Query_Tag
* @brief Request with #MRQ_QUERY_TAG
*
* @deprecated This structure will be removed in future version.
* Use MRQ_QUERY_FW_TAG instead.
*/
struct mrq_query_tag_request {
/** @brief Base address to store the firmware tag */
uint32_t addr;
} __ABI_PACKED;
/**
* @ingroup MRQ_Codes
* @def MRQ_QUERY_FW_TAG
* @brief Query BPMP firmware's tag (i.e. unique identifier)
*
* * Platforms: All
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: N/A
* * Response Payload: @ref mrq_query_fw_tag_response
*
*/
/**
* @ingroup Query_Tag
* @brief Response to #MRQ_QUERY_FW_TAG
*
* Sent in response to #MRQ_QUERY_FW_TAG message. #tag contains the unique
* identifier for the version of firmware issuing the reply.
*
*/
struct mrq_query_fw_tag_response {
/** @brief Array to store tag information */
uint8_t tag[32];
} __ABI_PACKED;
/**
* @ingroup MRQ_Codes
* @def MRQ_MODULE_LOAD
* @brief Dynamically load a BPMP code module
*
* * Platforms: T210, T214, T186
* @cond (bpmp_t210 || bpmp_t214 || bpmp_t186)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_module_load_request
* * Response Payload: @ref mrq_module_load_response
*
* @note This MRQ is disabled on production systems
*
*/
/**
* @ingroup Module
* @brief Request with #MRQ_MODULE_LOAD
*
* Used by #MRQ_MODULE_LOAD calls to ask the recipient to dynamically
* load the code located at #phys_addr and having size #size
* bytes. #phys_addr is treated as a void pointer.
*
* The recipient copies the code from #phys_addr to locally allocated
* memory prior to responding to this message.
*
* @todo document the module header format
*
* The sender is responsible for ensuring that the code is mapped in
* the recipient's address map.
*
*/
struct mrq_module_load_request {
/** @brief Base address of the code to load. Treated as (void *) */
uint32_t phys_addr; /* (void *) */
/** @brief Size in bytes of code to load */
uint32_t size;
} __ABI_PACKED;
/**
* @ingroup Module
* @brief Response to #MRQ_MODULE_LOAD
*
* @todo document mrq_response::err
*/
struct mrq_module_load_response {
/** @brief Handle to the loaded module */
uint32_t base;
} __ABI_PACKED;
/** @endcond*/
/**
* @ingroup MRQ_Codes
* @def MRQ_MODULE_UNLOAD
* @brief Unload a previously loaded code module
*
* * Platforms: T210, T214, T186
* @cond (bpmp_t210 || bpmp_t214 || bpmp_t186)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_module_unload_request
* * Response Payload: N/A
*
* @note This MRQ is disabled on production systems
*/
/**
* @ingroup Module
* @brief Request with #MRQ_MODULE_UNLOAD
*
* Used by #MRQ_MODULE_UNLOAD calls to request that a previously loaded
* module be unloaded.
*/
struct mrq_module_unload_request {
/** @brief Handle of the module to unload */
uint32_t base;
} __ABI_PACKED;
/** @endcond*/
/**
* @ingroup MRQ_Codes
* @def MRQ_TRACE_MODIFY
* @brief Modify the set of enabled trace events
*
* * Platforms: All
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_trace_modify_request
* * Response Payload: @ref mrq_trace_modify_response
*
* @note This MRQ is disabled on production systems
*/
/**
* @ingroup Trace
* @brief Request with #MRQ_TRACE_MODIFY
*
* Used by %MRQ_TRACE_MODIFY calls to enable or disable specify trace
* events. #set takes precedence for any bit set in both #set and
* #clr.
*/
struct mrq_trace_modify_request {
/** @brief Bit mask of trace events to disable */
uint32_t clr;
/** @brief Bit mask of trace events to enable */
uint32_t set;
} __ABI_PACKED;
/**
* @ingroup Trace
* @brief Response to #MRQ_TRACE_MODIFY
*
* Sent in repsonse to an #MRQ_TRACE_MODIFY message. #mask reflects the
* state of which events are enabled after the recipient acted on the
* message.
*
*/
struct mrq_trace_modify_response {
/** @brief Bit mask of trace event enable states */
uint32_t mask;
} __ABI_PACKED;
/**
* @ingroup MRQ_Codes
* @def MRQ_WRITE_TRACE
* @brief Write trace data to a buffer
*
* * Platforms: All
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_write_trace_request
* * Response Payload: @ref mrq_write_trace_response
*
* mrq_response::err depends on the @ref mrq_write_trace_request field
* values. err is -#BPMP_EINVAL if size is zero or area is NULL or
* area is in an illegal range. A positive value for err indicates the
* number of bytes written to area.
*
* @note This MRQ is disabled on production systems
*/
/**
* @ingroup Trace
* @brief Request with #MRQ_WRITE_TRACE
*
* Used by MRQ_WRITE_TRACE calls to ask the recipient to copy trace
* data from the recipient's local buffer to the output buffer. #area
* is treated as a byte-aligned pointer in the recipient's address
* space.
*
* The sender is responsible for ensuring that the output
* buffer is mapped in the recipient's address map. The recipient is
* responsible for protecting its own code and data from accidental
* overwrites.
*/
struct mrq_write_trace_request {
/** @brief Base address of output buffer */
uint32_t area;
/** @brief Size in bytes of the output buffer */
uint32_t size;
} __ABI_PACKED;
/**
* @ingroup Trace
* @brief Response to #MRQ_WRITE_TRACE
*
* Once this response is sent, the respondent will not access the
* output buffer further.
*/
struct mrq_write_trace_response {
/**
* @brief Flag whether more data remains in local buffer
*
* Value is 1 if the entire local trace buffer has been
* drained to the outputbuffer. Value is 0 otherwise.
*/
uint32_t eof;
} __ABI_PACKED;
/** @private */
struct mrq_threaded_ping_request {
uint32_t challenge;
} __ABI_PACKED;
/** @private */
struct mrq_threaded_ping_response {
uint32_t reply;
} __ABI_PACKED;
/**
* @ingroup MRQ_Codes
* @def MRQ_MODULE_MAIL
* @brief Send a message to a loadable module
*
* * Platforms: T210, T214, T186
* @cond (bpmp_t210 || bpmp_t214 || bpmp_t186)
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_module_mail_request
* * Response Payload: @ref mrq_module_mail_response
*
* @note This MRQ is disabled on production systems
*/
/**
* @ingroup Module
* @brief Request with #MRQ_MODULE_MAIL
*/
struct mrq_module_mail_request {
/** @brief Handle to the previously loaded module */
uint32_t base;
/** @brief Module-specific mail payload
*
* The length of data[ ] is unknown to the BPMP core firmware
* but it is limited to the size of an IPC message.
*/
uint8_t data[EMPTY_ARRAY];
} __ABI_PACKED;
/**
* @ingroup Module
* @brief Response to #MRQ_MODULE_MAIL
*/
struct mrq_module_mail_response {
/** @brief Module-specific mail payload
*
* The length of data[ ] is unknown to the BPMP core firmware
* but it is limited to the size of an IPC message.
*/
uint8_t data[EMPTY_ARRAY];
} __ABI_PACKED;
/** @endcond */
/**
* @ingroup MRQ_Codes
* @def MRQ_DEBUGFS
* @brief Interact with BPMP's debugfs file nodes
*
* * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_debugfs_request
* * Response Payload: @ref mrq_debugfs_response
*/
/**
* @addtogroup Debugfs
* @{
*
* The BPMP firmware implements a pseudo-filesystem called
* debugfs. Any driver within the firmware may register with debugfs
* to expose an arbitrary set of "files" in the filesystem. When
* software on the CPU writes to a debugfs file, debugfs passes the
* written data to a callback provided by the driver. When software on
* the CPU reads a debugfs file, debugfs queries the driver for the
* data to return to the CPU. The intention of the debugfs filesystem
* is to provide information useful for debugging the system at
* runtime.
*
* @note The files exposed via debugfs are not part of the
* BPMP firmware's ABI. debugfs files may be added or removed in any
* given version of the firmware. Typically the semantics of a debugfs
* file are consistent from version to version but even that is not
* guaranteed.
*
* @}
*/
/** @ingroup Debugfs */
enum mrq_debugfs_commands {
/** @brief Perform read */
CMD_DEBUGFS_READ = 1,
/** @brief Perform write */
CMD_DEBUGFS_WRITE = 2,
/** @brief Perform dumping directory */
CMD_DEBUGFS_DUMPDIR = 3,
/** @brief Not a command */
CMD_DEBUGFS_MAX
};
/**
* @ingroup Debugfs
* @brief Parameters for CMD_DEBUGFS_READ/WRITE command
*/
struct cmd_debugfs_fileop_request {
/** @brief Physical address pointing at filename */
uint32_t fnameaddr;
/** @brief Length in bytes of filename buffer */
uint32_t fnamelen;
/** @brief Physical address pointing to data buffer */
uint32_t dataaddr;
/** @brief Length in bytes of data buffer */
uint32_t datalen;
} __ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Parameters for CMD_DEBUGFS_READ/WRITE command
*/
struct cmd_debugfs_dumpdir_request {
/** @brief Physical address pointing to data buffer */
uint32_t dataaddr;
/** @brief Length in bytes of data buffer */
uint32_t datalen;
} __ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Response data for CMD_DEBUGFS_READ/WRITE command
*/
struct cmd_debugfs_fileop_response {
/** @brief Always 0 */
uint32_t reserved;
/** @brief Number of bytes read from or written to data buffer */
uint32_t nbytes;
} __ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Response data for CMD_DEBUGFS_DUMPDIR command
*/
struct cmd_debugfs_dumpdir_response {
/** @brief Always 0 */
uint32_t reserved;
/** @brief Number of bytes read from or written to data buffer */
uint32_t nbytes;
} __ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Request with #MRQ_DEBUGFS.
*
* The sender of an MRQ_DEBUGFS message uses #cmd to specify a debugfs
* command to execute. Legal commands are the values of @ref
* mrq_debugfs_commands. Each command requires a specific additional
* payload of data.
*
* |command |payload|
* |-------------------|-------|
* |CMD_DEBUGFS_READ |fop |
* |CMD_DEBUGFS_WRITE |fop |
* |CMD_DEBUGFS_DUMPDIR|dumpdir|
*/
struct mrq_debugfs_request {
/** @brief Sub-command (@ref mrq_debugfs_commands) */
uint32_t cmd;
union {
struct cmd_debugfs_fileop_request fop;
struct cmd_debugfs_dumpdir_request dumpdir;
} __UNION_ANON;
} __ABI_PACKED;
/**
* @ingroup Debugfs
*/
struct mrq_debugfs_response {
/** @brief Always 0 */
int32_t reserved;
union {
/** @brief Response data for CMD_DEBUGFS_READ OR
* CMD_DEBUGFS_WRITE command
*/
struct cmd_debugfs_fileop_response fop;
/** @brief Response data for CMD_DEBUGFS_DUMPDIR command */
struct cmd_debugfs_dumpdir_response dumpdir;
} __UNION_ANON;
} __ABI_PACKED;
/**
* @addtogroup Debugfs
* @{
*/
#define DEBUGFS_S_ISDIR (1 << 9)
#define DEBUGFS_S_IRUSR (1 << 8)
#define DEBUGFS_S_IWUSR (1 << 7)
/** @} */
/**
* @ingroup MRQ_Codes
* @def MRQ_RESET
* @brief Reset an IP block
*
* * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_reset_request
* * Response Payload: @ref mrq_reset_response
*
* @addtogroup Reset
* @{
*/
enum mrq_reset_commands {
/** @brief Assert module reset */
CMD_RESET_ASSERT = 1,
/** @brief Deassert module reset */
CMD_RESET_DEASSERT = 2,
/** @brief Assert and deassert the module reset */
CMD_RESET_MODULE = 3,
/** @brief Get the highest reset ID */
CMD_RESET_GET_MAX_ID = 4,
/** @brief Not part of ABI and subject to change */
CMD_RESET_MAX,
};
/**
* @brief Request with MRQ_RESET
*
* Used by the sender of an #MRQ_RESET message to request BPMP to
* assert or or deassert a given reset line.
*/
struct mrq_reset_request {
/** @brief Reset action to perform (@ref mrq_reset_commands) */
uint32_t cmd;
/** @brief Id of the reset to affected */
uint32_t reset_id;
} __ABI_PACKED;
/**
* @brief Response for MRQ_RESET sub-command CMD_RESET_GET_MAX_ID. When
* this sub-command is not supported, firmware will return -BPMP_EBADCMD
* in mrq_response::err.
*/
struct cmd_reset_get_max_id_response {
/** @brief Max reset id */
uint32_t max_id;
} __ABI_PACKED;
/**
* @brief Response with MRQ_RESET
*
* Each sub-command supported by @ref mrq_reset_request may return
* sub-command-specific data. Some do and some do not as indicated
* in the following table
*
* | sub-command | payload |
* |----------------------|------------------|
* | CMD_RESET_ASSERT | - |
* | CMD_RESET_DEASSERT | - |
* | CMD_RESET_MODULE | - |
* | CMD_RESET_GET_MAX_ID | reset_get_max_id |
*/
struct mrq_reset_response {
union {
struct cmd_reset_get_max_id_response reset_get_max_id;
} __UNION_ANON;
} __ABI_PACKED;
/** @} */
/**
* @ingroup MRQ_Codes
* @def MRQ_I2C
* @brief Issue an i2c transaction
*
* * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_i2c_request
* * Response Payload: @ref mrq_i2c_response
*
* @addtogroup I2C
* @{
*/
#define TEGRA_I2C_IPC_MAX_IN_BUF_SIZE (MSG_DATA_MIN_SZ - 12)
#define TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE (MSG_DATA_MIN_SZ - 4)
#define SERIALI2C_TEN 0x0010
#define SERIALI2C_RD 0x0001
#define SERIALI2C_STOP 0x8000
#define SERIALI2C_NOSTART 0x4000
#define SERIALI2C_REV_DIR_ADDR 0x2000
#define SERIALI2C_IGNORE_NAK 0x1000
#define SERIALI2C_NO_RD_ACK 0x0800
#define SERIALI2C_RECV_LEN 0x0400
enum {
CMD_I2C_XFER = 1
};
/**
* @brief Serializable i2c request
*
* Instances of this structure are packed (little-endian) into
* cmd_i2c_xfer_request::data_buf. Each instance represents a single
* transaction (or a portion of a transaction with repeated starts) on
* an i2c bus.
*
* Because these structures are packed, some instances are likely to
* be misaligned. Additionally because #data is variable length, it is
* not possible to iterate through a serialized list of these
* structures without inspecting #len in each instance. It may be
* easier to serialize or deserialize cmd_i2c_xfer_request::data_buf
* manually rather than using this structure definition.
*/
struct serial_i2c_request {
/** @brief I2C slave address */
uint16_t addr;
/** @brief Bitmask of SERIALI2C_ flags */
uint16_t flags;
/** @brief Length of I2C transaction in bytes */
uint16_t len;
/** @brief For write transactions only, #len bytes of data */
uint8_t data[];
} __ABI_PACKED;
/**
* @brief Trigger one or more i2c transactions
*/
struct cmd_i2c_xfer_request {
/** @brief Valid bus number from @ref bpmp_i2c_ids*/
uint32_t bus_id;
/** @brief Count of valid bytes in #data_buf*/
uint32_t data_size;
/** @brief Serialized packed instances of @ref serial_i2c_request*/
uint8_t data_buf[TEGRA_I2C_IPC_MAX_IN_BUF_SIZE];
} __ABI_PACKED;
/**
* @brief Container for data read from the i2c bus
*
* Processing an cmd_i2c_xfer_request::data_buf causes BPMP to execute
* zero or more I2C reads. The data read from the bus is serialized
* into #data_buf.
*/
struct cmd_i2c_xfer_response {
/** @brief Count of valid bytes in #data_buf*/
uint32_t data_size;
/** @brief I2c read data */
uint8_t data_buf[TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE];
} __ABI_PACKED;
/**
* @brief Request with #MRQ_I2C
*/
struct mrq_i2c_request {
/** @brief Always CMD_I2C_XFER (i.e. 1) */
uint32_t cmd;
/** @brief Parameters of the transfer request */
struct cmd_i2c_xfer_request xfer;
} __ABI_PACKED;
/**
* @brief Response to #MRQ_I2C
*/
struct mrq_i2c_response {
struct cmd_i2c_xfer_response xfer;
} __ABI_PACKED;
/** @} */
/**
* @ingroup MRQ_Codes
* @def MRQ_CLK
* @brief Perform a clock operation
*
* * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_clk_request
* * Response Payload: @ref mrq_clk_response
*
* @addtogroup Clocks
* @{
*/
enum {
CMD_CLK_GET_RATE = 1,
CMD_CLK_SET_RATE = 2,
CMD_CLK_ROUND_RATE = 3,
CMD_CLK_GET_PARENT = 4,
CMD_CLK_SET_PARENT = 5,
CMD_CLK_IS_ENABLED = 6,
CMD_CLK_ENABLE = 7,
CMD_CLK_DISABLE = 8,
CMD_CLK_GET_ALL_INFO = 14,
CMD_CLK_GET_MAX_CLK_ID = 15,
CMD_CLK_GET_FMAX_AT_VMIN = 16,
CMD_CLK_MAX,
};
#define BPMP_CLK_HAS_MUX (1 << 0)
#define BPMP_CLK_HAS_SET_RATE (1 << 1)
#define BPMP_CLK_IS_ROOT (1 << 2)
#define MRQ_CLK_NAME_MAXLEN 40
#define MRQ_CLK_MAX_PARENTS 16
/** @private */
struct cmd_clk_get_rate_request {
EMPTY
} __ABI_PACKED;
struct cmd_clk_get_rate_response {
int64_t rate;
} __ABI_PACKED;
struct cmd_clk_set_rate_request {
int32_t unused;
int64_t rate;
} __ABI_PACKED;
struct cmd_clk_set_rate_response {
int64_t rate;
} __ABI_PACKED;
struct cmd_clk_round_rate_request {
int32_t unused;
int64_t rate;
} __ABI_PACKED;
struct cmd_clk_round_rate_response {
int64_t rate;
} __ABI_PACKED;
/** @private */
struct cmd_clk_get_parent_request {
EMPTY
} __ABI_PACKED;
struct cmd_clk_get_parent_response {
uint32_t parent_id;
} __ABI_PACKED;
struct cmd_clk_set_parent_request {
uint32_t parent_id;
} __ABI_PACKED;
struct cmd_clk_set_parent_response {
uint32_t parent_id;
} __ABI_PACKED;
/** @private */
struct cmd_clk_is_enabled_request {
EMPTY
} __ABI_PACKED;
struct cmd_clk_is_enabled_response {
int32_t state;
} __ABI_PACKED;
/** @private */
struct cmd_clk_enable_request {
EMPTY
} __ABI_PACKED;
/** @private */
struct cmd_clk_enable_response {
EMPTY
} __ABI_PACKED;
/** @private */
struct cmd_clk_disable_request {
EMPTY
} __ABI_PACKED;
/** @private */
struct cmd_clk_disable_response {
EMPTY
} __ABI_PACKED;
/** @private */
struct cmd_clk_get_all_info_request {
EMPTY
} __ABI_PACKED;
struct cmd_clk_get_all_info_response {
uint32_t flags;
uint32_t parent;
uint32_t parents[MRQ_CLK_MAX_PARENTS];
uint8_t num_parents;
uint8_t name[MRQ_CLK_NAME_MAXLEN];
} __ABI_PACKED;
/** @private */
struct cmd_clk_get_max_clk_id_request {
EMPTY
} __ABI_PACKED;
struct cmd_clk_get_max_clk_id_response {
uint32_t max_id;
} __ABI_PACKED;
/** @private */
struct cmd_clk_get_fmax_at_vmin_request {
EMPTY
} __ABI_PACKED;
struct cmd_clk_get_fmax_at_vmin_response {
int64_t rate;
} __ABI_PACKED;
/**
* @ingroup Clocks
* @brief Request with #MRQ_CLK
*
* Used by the sender of an #MRQ_CLK message to control clocks. The
* clk_request is split into several sub-commands. Some sub-commands
* require no additional data. Others have a sub-command specific
* payload
*
* |sub-command |payload |
* |----------------------------|-----------------------|
* |CMD_CLK_GET_RATE |- |
* |CMD_CLK_SET_RATE |clk_set_rate |
* |CMD_CLK_ROUND_RATE |clk_round_rate |
* |CMD_CLK_GET_PARENT |- |
* |CMD_CLK_SET_PARENT |clk_set_parent |
* |CMD_CLK_IS_ENABLED |- |
* |CMD_CLK_ENABLE |- |
* |CMD_CLK_DISABLE |- |
* |CMD_CLK_GET_ALL_INFO |- |
* |CMD_CLK_GET_MAX_CLK_ID |- |
* |CMD_CLK_GET_FMAX_AT_VMIN |-
* |
*
*/
struct mrq_clk_request {
/** @brief Sub-command and clock id concatenated to 32-bit word.
* - bits[31..24] is the sub-cmd.
* - bits[23..0] is the clock id
*/
uint32_t cmd_and_id;
union {
/** @private */
struct cmd_clk_get_rate_request clk_get_rate;
struct cmd_clk_set_rate_request clk_set_rate;
struct cmd_clk_round_rate_request clk_round_rate;
/** @private */
struct cmd_clk_get_parent_request clk_get_parent;
struct cmd_clk_set_parent_request clk_set_parent;
/** @private */
struct cmd_clk_enable_request clk_enable;
/** @private */
struct cmd_clk_disable_request clk_disable;
/** @private */
struct cmd_clk_is_enabled_request clk_is_enabled;
/** @private */
struct cmd_clk_get_all_info_request clk_get_all_info;
/** @private */
struct cmd_clk_get_max_clk_id_request clk_get_max_clk_id;
/** @private */
struct cmd_clk_get_fmax_at_vmin_request clk_get_fmax_at_vmin;
} __UNION_ANON;
} __ABI_PACKED;
/**
* @ingroup Clocks
* @brief Response to MRQ_CLK
*
* Each sub-command supported by @ref mrq_clk_request may return
* sub-command-specific data. Some do and some do not as indicated in
* the following table
*
* |sub-command |payload |
* |----------------------------|------------------------|
* |CMD_CLK_GET_RATE |clk_get_rate |
* |CMD_CLK_SET_RATE |clk_set_rate |
* |CMD_CLK_ROUND_RATE |clk_round_rate |
* |CMD_CLK_GET_PARENT |clk_get_parent |
* |CMD_CLK_SET_PARENT |clk_set_parent |
* |CMD_CLK_IS_ENABLED |clk_is_enabled |
* |CMD_CLK_ENABLE |- |
* |CMD_CLK_DISABLE |- |
* |CMD_CLK_GET_ALL_INFO |clk_get_all_info |
* |CMD_CLK_GET_MAX_CLK_ID |clk_get_max_id |
* |CMD_CLK_GET_FMAX_AT_VMIN |clk_get_fmax_at_vmin |
*
*/
struct mrq_clk_response {
union {
struct cmd_clk_get_rate_response clk_get_rate;
struct cmd_clk_set_rate_response clk_set_rate;
struct cmd_clk_round_rate_response clk_round_rate;
struct cmd_clk_get_parent_response clk_get_parent;
struct cmd_clk_set_parent_response clk_set_parent;
/** @private */
struct cmd_clk_enable_response clk_enable;
/** @private */
struct cmd_clk_disable_response clk_disable;
struct cmd_clk_is_enabled_response clk_is_enabled;
struct cmd_clk_get_all_info_response clk_get_all_info;
struct cmd_clk_get_max_clk_id_response clk_get_max_clk_id;
struct cmd_clk_get_fmax_at_vmin_response clk_get_fmax_at_vmin;
} __UNION_ANON;
} __ABI_PACKED;
/** @} */
/**
* @ingroup MRQ_Codes
* @def MRQ_QUERY_ABI
* @brief Check if an MRQ is implemented
*
* * Platforms: All
* * Initiators: Any
* * Targets: Any except DMCE
* * Request Payload: @ref mrq_query_abi_request
* * Response Payload: @ref mrq_query_abi_response
*/
/**
* @ingroup ABI_info
* @brief Request with MRQ_QUERY_ABI
*
* Used by #MRQ_QUERY_ABI call to check if MRQ code #mrq is supported
* by the recipient.
*/
struct mrq_query_abi_request {
/** @brief MRQ code to query */
uint32_t mrq;
} __ABI_PACKED;
/**
* @ingroup ABI_info
* @brief Response to MRQ_QUERY_ABI
*
* @note mrq_response::err of 0 indicates that the query was
* successful, not that the MRQ itself is supported!
*/
struct mrq_query_abi_response {
/** @brief 0 if queried MRQ is supported. Else, -#BPMP_ENODEV */
int32_t status;
} __ABI_PACKED;
/**
* @ingroup MRQ_Codes
* @def MRQ_PG_READ_STATE
* @brief Read the power-gating state of a partition
*
* * Platforms: T186
* @cond bpmp_t186
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_pg_read_state_request
* * Response Payload: @ref mrq_pg_read_state_response
*/
/**
* @ingroup Powergating
* @brief Request with #MRQ_PG_READ_STATE
*
* Used by MRQ_PG_READ_STATE call to read the current state of a
* partition.
*/
struct mrq_pg_read_state_request {
/** @brief ID of partition */
uint32_t partition_id;
} __ABI_PACKED;
/**
* @ingroup Powergating
* @brief Response to MRQ_PG_READ_STATE
* @todo define possible errors.
*/
struct mrq_pg_read_state_response {
/** @brief Read as don't care */
uint32_t sram_state;
/** @brief State of power partition
* * 0 : off
* * 1 : on
*/
uint32_t logic_state;
} __ABI_PACKED;
/** @endcond*/
/** @} */
/**
* @ingroup MRQ_Codes
* @def MRQ_PG_UPDATE_STATE
* @brief Modify the power-gating state of a partition. In contrast to
* MRQ_PG calls, the operations that change state (on/off) of power
* partition are reference counted.
*
* * Platforms: T186
* @cond bpmp_t186
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_pg_update_state_request
* * Response Payload: N/A
*/
/**
* @ingroup Powergating
* @brief Request with mrq_pg_update_state_request
*
* Used by #MRQ_PG_UPDATE_STATE call to request BPMP to change the
* state of a power partition #partition_id.
*/
struct mrq_pg_update_state_request {
/** @brief ID of partition */
uint32_t partition_id;
/** @brief Secondary control of power partition
* @details Ignored by many versions of the BPMP
* firmware. For maximum compatibility, set the value
* according to @ref logic_state
* * 0x1: power ON partition (@ref logic_state == 0x3)
* * 0x3: power OFF partition (@ref logic_state == 0x1)
*/
uint32_t sram_state;
/** @brief Controls state of power partition, legal values are
* * 0x1 : power OFF partition
* * 0x3 : power ON partition
*/
uint32_t logic_state;
/** @brief Change state of clocks of the power partition, legal values
* * 0x0 : do not change clock state
* * 0x1 : disable partition clocks (only applicable when
* @ref logic_state == 0x1)
* * 0x3 : enable partition clocks (only applicable when
* @ref logic_state == 0x3)
*/
uint32_t clock_state;
} __ABI_PACKED;
/** @endcond*/
/**
* @ingroup MRQ_Codes
* @def MRQ_PG
* @brief Control power-gating state of a partition. In contrast to
* MRQ_PG_UPDATE_STATE, operations that change the power partition
* state are NOT reference counted
*
* @note BPMP-FW forcefully turns off some partitions as part of SC7 entry
* because their state cannot be adequately restored on exit. Therefore,
* it is recommended to power off all domains via MRQ_PG prior to SC7 entry.
* See @ref bpmp_pdomain_ids for further detail.
*
* * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_pg_request
* * Response Payload: @ref mrq_pg_response
*
* @addtogroup Powergating
* @{
*/
enum mrq_pg_cmd {
/**
* @brief Check whether the BPMP driver supports the specified
* request type
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_PG_QUERY_ABI = 0,
/**
* @brief Set the current state of specified power domain. The
* possible values for power domains are defined in enum
* pg_states
*
* mrq_response:err is
* 0: Success
* -#BPMP_EINVAL: Invalid request parameters
*/
CMD_PG_SET_STATE = 1,
/**
* @brief Get the current state of specified power domain. The
* possible values for power domains are defined in enum
* pg_states
*
* mrq_response:err is
* 0: Success
* -#BPMP_EINVAL: Invalid request parameters
*/
CMD_PG_GET_STATE = 2,
/**
* @brief Get the name string of specified power domain id.
*
* mrq_response:err is
* 0: Success
* -#BPMP_EINVAL: Invalid request parameters
*/
CMD_PG_GET_NAME = 3,
/**
* @brief Get the highest power domain id in the system. Not
* all IDs between 0 and max_id are valid IDs.
*
* mrq_response:err is
* 0: Success
* -#BPMP_EINVAL: Invalid request parameters
*/
CMD_PG_GET_MAX_ID = 4,
};
#define MRQ_PG_NAME_MAXLEN 40
enum pg_states {
/** @brief Power domain is OFF */
PG_STATE_OFF = 0,
/** @brief Power domain is ON */
PG_STATE_ON = 1,
/**
* @brief a legacy state where power domain and the clock
* associated to the domain are ON.
* This state is only supported in T186, and the use of it is
* deprecated.
*/
PG_STATE_RUNNING = 2,
};
struct cmd_pg_query_abi_request {
/** @ref mrq_pg_cmd */
uint32_t type;
} __ABI_PACKED;
struct cmd_pg_set_state_request {
/** @ref pg_states */
uint32_t state;
} __ABI_PACKED;
struct cmd_pg_get_state_response {
/** @ref pg_states */
uint32_t state;
} __ABI_PACKED;
struct cmd_pg_get_name_response {
uint8_t name[MRQ_PG_NAME_MAXLEN];
} __ABI_PACKED;
struct cmd_pg_get_max_id_response {
uint32_t max_id;
} __ABI_PACKED;
/**
* @brief Request with #MRQ_PG
*
* Used by the sender of an #MRQ_PG message to control power
* partitions. The pg_request is split into several sub-commands. Some
* sub-commands require no additional data. Others have a sub-command
* specific payload
*
* |sub-command |payload |
* |----------------------------|-----------------------|
* |CMD_PG_QUERY_ABI | query_abi |
* |CMD_PG_SET_STATE | set_state |
* |CMD_PG_GET_STATE | - |
* |CMD_PG_GET_NAME | - |
* |CMD_PG_GET_MAX_ID | - |
*
*/
struct mrq_pg_request {
uint32_t cmd;
uint32_t id;
union {
struct cmd_pg_query_abi_request query_abi;
struct cmd_pg_set_state_request set_state;
} __UNION_ANON;
} __ABI_PACKED;
/**
* @brief Response to MRQ_PG
*
* Each sub-command supported by @ref mrq_pg_request may return
* sub-command-specific data. Some do and some do not as indicated in
* the following table
*
* |sub-command |payload |
* |----------------------------|-----------------------|
* |CMD_PG_QUERY_ABI | - |
* |CMD_PG_SET_STATE | - |
* |CMD_PG_GET_STATE | get_state |
* |CMD_PG_GET_NAME | get_name |
* |CMD_PG_GET_MAX_ID | get_max_id |
*/
struct mrq_pg_response {
union {
struct cmd_pg_get_state_response get_state;
struct cmd_pg_get_name_response get_name;
struct cmd_pg_get_max_id_response get_max_id;
} __UNION_ANON;
} __ABI_PACKED;
/** @} */
/**
* @ingroup MRQ_Codes
* @def MRQ_THERMAL
* @brief Interact with BPMP thermal framework
*
* * Platforms: T186, T194
* * Initiators: Any
* * Targets: Any
* * Request Payload: TODO
* * Response Payload: TODO
*
* @addtogroup Thermal
*
* The BPMP firmware includes a thermal framework. Drivers within the
* bpmp firmware register with the framework to provide thermal
* zones. Each thermal zone corresponds to an entity whose temperature
* can be measured. The framework also has a notion of trip points. A
* trip point consists of a thermal zone id, a temperature, and a
* callback routine. The framework invokes the callback when the zone
* hits the indicated temperature. The BPMP firmware uses this thermal
* framework interally to implement various temperature-dependent
* functions.
*
* Software on the CPU can use #MRQ_THERMAL (with payload @ref
* mrq_thermal_host_to_bpmp_request) to interact with the BPMP thermal
* framework. The CPU must It can query the number of supported zones,
* query zone temperatures, and set trip points.
*
* When a trip point set by the CPU gets crossed, BPMP firmware issues
* an IPC to the CPU having mrq_request::mrq = #MRQ_THERMAL and a
* payload of @ref mrq_thermal_bpmp_to_host_request.
* @{
*/
enum mrq_thermal_host_to_bpmp_cmd {
/**
* @brief Check whether the BPMP driver supports the specified
* request type.
*
* Host needs to supply request parameters.
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_THERMAL_QUERY_ABI = 0,
/**
* @brief Get the current temperature of the specified zone.
*
* Host needs to supply request parameters.
*
* mrq_response::err is
* * 0: Temperature query succeeded.
* * -#BPMP_EINVAL: Invalid request parameters.
* * -#BPMP_ENOENT: No driver registered for thermal zone..
* * -#BPMP_EFAULT: Problem reading temperature measurement.
*/
CMD_THERMAL_GET_TEMP = 1,
/**
* @brief Enable or disable and set the lower and upper
* thermal limits for a thermal trip point. Each zone has
* one trip point.
*
* Host needs to supply request parameters. Once the
* temperature hits a trip point, the BPMP will send a message
* to the CPU having MRQ=MRQ_THERMAL and
* type=CMD_THERMAL_HOST_TRIP_REACHED
*
* mrq_response::err is
* * 0: Trip successfully set.
* * -#BPMP_EINVAL: Invalid request parameters.
* * -#BPMP_ENOENT: No driver registered for thermal zone.
* * -#BPMP_EFAULT: Problem setting trip point.
*/
CMD_THERMAL_SET_TRIP = 2,
/**
* @brief Get the number of supported thermal zones.
*
* No request parameters required.
*
* mrq_response::err is always 0, indicating success.
*/
CMD_THERMAL_GET_NUM_ZONES = 3,
/** @brief: number of supported host-to-bpmp commands. May
* increase in future
*/
CMD_THERMAL_HOST_TO_BPMP_NUM
};
enum mrq_thermal_bpmp_to_host_cmd {
/**
* @brief Indication that the temperature for a zone has
* exceeded the range indicated in the thermal trip point
* for the zone.
*
* BPMP needs to supply request parameters. Host only needs to
* acknowledge.
*/
CMD_THERMAL_HOST_TRIP_REACHED = 100,
/** @brief: number of supported bpmp-to-host commands. May
* increase in future
*/
CMD_THERMAL_BPMP_TO_HOST_NUM
};
/*
* Host->BPMP request data for request type CMD_THERMAL_QUERY_ABI
*
* zone: Request type for which to check existence.
*/
struct cmd_thermal_query_abi_request {
uint32_t type;
} __ABI_PACKED;
/*
* Host->BPMP request data for request type CMD_THERMAL_GET_TEMP
*
* zone: Number of thermal zone.
*/
struct cmd_thermal_get_temp_request {
uint32_t zone;
} __ABI_PACKED;
/*
* BPMP->Host reply data for request CMD_THERMAL_GET_TEMP
*
* error: 0 if request succeeded.
* -BPMP_EINVAL if request parameters were invalid.
* -BPMP_ENOENT if no driver was registered for the specified thermal zone.
* -BPMP_EFAULT for other thermal zone driver errors.
* temp: Current temperature in millicelsius.
*/
struct cmd_thermal_get_temp_response {
int32_t temp;
} __ABI_PACKED;
/*
* Host->BPMP request data for request type CMD_THERMAL_SET_TRIP
*
* zone: Number of thermal zone.
* low: Temperature of lower trip point in millicelsius
* high: Temperature of upper trip point in millicelsius
* enabled: 1 to enable trip point, 0 to disable trip point
*/
struct cmd_thermal_set_trip_request {
uint32_t zone;
int32_t low;
int32_t high;
uint32_t enabled;
} __ABI_PACKED;
/*
* BPMP->Host request data for request type CMD_THERMAL_HOST_TRIP_REACHED
*
* zone: Number of thermal zone where trip point was reached.
*/
struct cmd_thermal_host_trip_reached_request {
uint32_t zone;
} __ABI_PACKED;
/*
* BPMP->Host reply data for request type CMD_THERMAL_GET_NUM_ZONES
*
* num: Number of supported thermal zones. The thermal zones are indexed
* starting from zero.
*/
struct cmd_thermal_get_num_zones_response {
uint32_t num;
} __ABI_PACKED;
/*
* Host->BPMP request data.
*
* Reply type is union mrq_thermal_bpmp_to_host_response.
*
* type: Type of request. Values listed in enum mrq_thermal_type.
* data: Request type specific parameters.
*/
struct mrq_thermal_host_to_bpmp_request {
uint32_t type;
union {
struct cmd_thermal_query_abi_request query_abi;
struct cmd_thermal_get_temp_request get_temp;
struct cmd_thermal_set_trip_request set_trip;
} __UNION_ANON;
} __ABI_PACKED;
/*
* BPMP->Host request data.
*
* type: Type of request. Values listed in enum mrq_thermal_type.
* data: Request type specific parameters.
*/
struct mrq_thermal_bpmp_to_host_request {
uint32_t type;
union {
struct cmd_thermal_host_trip_reached_request host_trip_reached;
} __UNION_ANON;
} __ABI_PACKED;
/*
* Data in reply to a Host->BPMP request.
*/
union mrq_thermal_bpmp_to_host_response {
struct cmd_thermal_get_temp_response get_temp;
struct cmd_thermal_get_num_zones_response get_num_zones;
} __ABI_PACKED;
/** @} */
/**
* @ingroup MRQ_Codes
* @def MRQ_CPU_VHINT
* @brief Query CPU voltage hint data
*
* * Platforms: T186
* @cond bpmp_t186
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_cpu_vhint_request
* * Response Payload: N/A
*
* @addtogroup Vhint
* @{
*/
/**
* @brief Request with #MRQ_CPU_VHINT
*
* Used by #MRQ_CPU_VHINT call by CCPLEX to retrieve voltage hint data
* from BPMP to memory space pointed by #addr. CCPLEX is responsible
* to allocate sizeof(cpu_vhint_data) sized block of memory and
* appropriately map it for BPMP before sending the request.
*/
struct mrq_cpu_vhint_request {
/** @brief IOVA address for the #cpu_vhint_data */
uint32_t addr;
/** @brief ID of the cluster whose data is requested */
uint32_t cluster_id;
} __ABI_PACKED;
/**
* @brief Description of the CPU v/f relation
*
* Used by #MRQ_CPU_VHINT call to carry data pointed by
* #mrq_cpu_vhint_request::addr
*/
struct cpu_vhint_data {
uint32_t ref_clk_hz; /**< reference frequency in Hz */
uint16_t pdiv; /**< post divider value */
uint16_t mdiv; /**< input divider value */
uint16_t ndiv_max; /**< fMAX expressed with max NDIV value */
/** table of ndiv values as a function of vINDEX (voltage index) */
uint16_t ndiv[80];
/** minimum allowed NDIV value */
uint16_t ndiv_min;
/** minimum allowed voltage hint value (as in vINDEX) */
uint16_t vfloor;
/** maximum allowed voltage hint value (as in vINDEX) */
uint16_t vceil;
/** post-multiplier for vindex value */
uint16_t vindex_mult;
/** post-divider for vindex value */
uint16_t vindex_div;
/** reserved for future use */
uint16_t reserved[328];
} __ABI_PACKED;
/** @endcond */
/** @} */
/**
* @ingroup MRQ_Codes
* @def MRQ_ABI_RATCHET
* @brief ABI ratchet value query
*
* * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_abi_ratchet_request
* * Response Payload: @ref mrq_abi_ratchet_response
* @addtogroup ABI_info
* @{
*/
/**
* @brief An ABI compatibility mechanism
*
* BPMP_ABI_RATCHET_VALUE may increase for various reasons in a future
* revision of this header file.
* 1. That future revision deprecates some MRQ
* 2. That future revision introduces a breaking change to an existing
* MRQ or
* 3. A bug is discovered in an existing implementation of the BPMP-FW
* (or possibly one of its clients) which warrants deprecating that
* implementation.
*/
#define BPMP_ABI_RATCHET_VALUE 3
/**
* @brief Request with #MRQ_ABI_RATCHET.
*
* #ratchet should be #BPMP_ABI_RATCHET_VALUE from the ABI header
* against which the requester was compiled.
*
* If ratchet is less than BPMP's #BPMP_ABI_RATCHET_VALUE, BPMP may
* reply with mrq_response::err = -#BPMP_ERANGE to indicate that
* BPMP-FW cannot interoperate correctly with the requester. Requester
* should cease further communication with BPMP.
*
* Otherwise, err shall be 0.
*/
struct mrq_abi_ratchet_request {
/** @brief Requester's ratchet value */
uint16_t ratchet;
};
/**
* @brief Response to #MRQ_ABI_RATCHET
*
* #ratchet shall be #BPMP_ABI_RATCHET_VALUE from the ABI header
* against which BPMP firwmare was compiled.
*
* If #ratchet is less than the requester's #BPMP_ABI_RATCHET_VALUE,
* the requster must either interoperate with BPMP according to an ABI
* header version with BPMP_ABI_RATCHET_VALUE = ratchet or cease
* communication with BPMP.
*
* If mrq_response::err is 0 and ratchet is greater than or equal to the
* requester's BPMP_ABI_RATCHET_VALUE, the requester should continue
* normal operation.
*/
struct mrq_abi_ratchet_response {
/** @brief BPMP's ratchet value */
uint16_t ratchet;
};
/** @} */
/**
* @ingroup MRQ_Codes
* @def MRQ_EMC_DVFS_LATENCY
* @brief Query frequency dependent EMC DVFS latency
*
* * Platforms: T186, T194
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
* * Response Payload: @ref mrq_emc_dvfs_latency_response
* @addtogroup EMC
* @{
*/
/**
* @brief Used by @ref mrq_emc_dvfs_latency_response
*/
struct emc_dvfs_latency {
/** @brief EMC frequency in kHz */
uint32_t freq;
/** @brief EMC DVFS latency in nanoseconds */
uint32_t latency;
} __ABI_PACKED;
#define EMC_DVFS_LATENCY_MAX_SIZE 14
/**
* @brief Response to #MRQ_EMC_DVFS_LATENCY
*/
struct mrq_emc_dvfs_latency_response {
/** @brief The number valid entries in #pairs */
uint32_t num_pairs;
/** @brief EMC <frequency, latency> information */
struct emc_dvfs_latency pairs[EMC_DVFS_LATENCY_MAX_SIZE];
} __ABI_PACKED;
/** @} */
/**
* @ingroup MRQ_Codes
* @def MRQ_CPU_NDIV_LIMITS
* @brief CPU freq. limits in ndiv
*
* * Platforms: T194 onwards
* @cond bpmp_t194
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_cpu_ndiv_limits_request
* * Response Payload: @ref mrq_cpu_ndiv_limits_response
* @addtogroup CPU
* @{
*/
/**
* @brief Request for ndiv limits of a cluster
*/
struct mrq_cpu_ndiv_limits_request {
/** @brief Enum cluster_id */
uint32_t cluster_id;
} __ABI_PACKED;
/**
* @brief Response to #MRQ_CPU_NDIV_LIMITS
*/
struct mrq_cpu_ndiv_limits_response {
/** @brief Reference frequency in Hz */
uint32_t ref_clk_hz;
/** @brief Post divider value */
uint16_t pdiv;
/** @brief Input divider value */
uint16_t mdiv;
/** @brief FMAX expressed with max NDIV value */
uint16_t ndiv_max;
/** @brief Minimum allowed NDIV value */
uint16_t ndiv_min;
} __ABI_PACKED;
/** @} */
/** @endcond */
/**
* @ingroup MRQ_Codes
* @def MRQ_CPU_AUTO_CC3
* @brief Query CPU cluster auto-CC3 configuration
*
* * Platforms: T194 onwards
* @cond bpmp_t194
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_cpu_auto_cc3_request
* * Response Payload: @ref mrq_cpu_auto_cc3_response
* @addtogroup CC3
*
* Queries from BPMP auto-CC3 configuration (allowed/not allowed) for a
* specified cluster. CCPLEX s/w uses this information to override its own
* device tree auto-CC3 settings, so that BPMP device tree is a single source of
* auto-CC3 platform configuration.
*
* @{
*/
/**
* @brief Request for auto-CC3 configuration of a cluster
*/
struct mrq_cpu_auto_cc3_request {
/** @brief Enum cluster_id (logical cluster id, known to CCPLEX s/w) */
uint32_t cluster_id;
} __ABI_PACKED;
/**
* @brief Response to #MRQ_CPU_AUTO_CC3
*/
struct mrq_cpu_auto_cc3_response {
/**
* @brief auto-CC3 configuration
*
* - bits[31..10] reserved.
* - bits[9..1] cc3 ndiv
* - bit [0] if "1" auto-CC3 is allowed, if "0" auto-CC3 is not allowed
*/
uint32_t auto_cc3_config;
} __ABI_PACKED;
/** @} */
/** @endcond */
/**
* @ingroup MRQ_Codes
* @def MRQ_TRACE_ITER
* @brief Manage the trace iterator
*
* * Platforms: All
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
* * Response Payload: @ref mrq_trace_iter_request
* @addtogroup Trace
* @{
*/
enum {
/** @brief (re)start the tracing now. Ignore older events */
TRACE_ITER_INIT = 0,
/** @brief Clobber all events in the trace buffer */
TRACE_ITER_CLEAN = 1
};
/**
* @brief Request with #MRQ_TRACE_ITER
*/
struct mrq_trace_iter_request {
/** @brief TRACE_ITER_INIT or TRACE_ITER_CLEAN */
uint32_t cmd;
} __ABI_PACKED;
/** @} */
/**
* @ingroup MRQ_Codes
* @def MRQ_RINGBUF_CONSOLE
* @brief A ring buffer debug console for BPMP
* @addtogroup RingbufConsole
*
* The ring buffer debug console aims to be a substitute for the UART debug
* console. The debug console is implemented with two ring buffers in the
* BPMP-FW, the RX (receive) and TX (transmit) buffers. Characters can be read
* and written to the buffers by the host via the MRQ interface.
*
* @{
*/
/**
* @brief Maximum number of bytes transferred in a single write command to the
* BPMP
*
* This is determined by the number of free bytes in the message struct,
* rounded down to a multiple of four.
*/
#define MRQ_RINGBUF_CONSOLE_MAX_WRITE_LEN 112
/**
* @brief Maximum number of bytes transferred in a single read command to the
* BPMP
*
* This is determined by the number of free bytes in the message struct,
* rounded down to a multiple of four.
*/
#define MRQ_RINGBUF_CONSOLE_MAX_READ_LEN 116
enum mrq_ringbuf_console_host_to_bpmp_cmd {
/**
* @brief Check whether the BPMP driver supports the specified request
* type
*
* mrq_response::err is 0 if the specified request is supported and
* -#BPMP_ENODEV otherwise
*/
CMD_RINGBUF_CONSOLE_QUERY_ABI = 0,
/**
* @brief Perform a read operation on the BPMP TX buffer
*
* mrq_response::err is 0
*/
CMD_RINGBUF_CONSOLE_READ = 1,
/**
* @brief Perform a write operation on the BPMP RX buffer
*
* mrq_response::err is 0 if the operation was successful and
* -#BPMP_ENODEV otherwise
*/
CMD_RINGBUF_CONSOLE_WRITE = 2,
/**
* @brief Get the length of the buffer and the physical addresses of
* the buffer data and the head and tail counters
*
* mrq_response::err is 0 if the operation was successful and
* -#BPMP_ENODEV otherwise
*/
CMD_RINGBUF_CONSOLE_GET_FIFO = 3,
};
/**
* @ingroup RingbufConsole
* @brief Host->BPMP request data for request type
* #CMD_RINGBUF_CONSOLE_QUERY_ABI
*/
struct cmd_ringbuf_console_query_abi_req {
/** @brief Command identifier to be queried */
uint32_t cmd;
} __ABI_PACKED;
/** @private */
struct cmd_ringbuf_console_query_abi_resp {
EMPTY
} __ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief Host->BPMP request data for request type #CMD_RINGBUF_CONSOLE_READ
*/
struct cmd_ringbuf_console_read_req {
/**
* @brief Number of bytes requested to be read from the BPMP TX buffer
*/
uint8_t len;
} __ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief BPMP->Host response data for request type #CMD_RINGBUF_CONSOLE_READ
*/
struct cmd_ringbuf_console_read_resp {
/** @brief The actual data read from the BPMP TX buffer */
uint8_t data[MRQ_RINGBUF_CONSOLE_MAX_READ_LEN];
/** @brief Number of bytes in cmd_ringbuf_console_read_resp::data */
uint8_t len;
} __ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief Host->BPMP request data for request type #CMD_RINGBUF_CONSOLE_WRITE
*/
struct cmd_ringbuf_console_write_req {
/** @brief The actual data to be written to the BPMP RX buffer */
uint8_t data[MRQ_RINGBUF_CONSOLE_MAX_WRITE_LEN];
/** @brief Number of bytes in cmd_ringbuf_console_write_req::data */
uint8_t len;
} __ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief BPMP->Host response data for request type #CMD_RINGBUF_CONSOLE_WRITE
*/
struct cmd_ringbuf_console_write_resp {
/** @brief Number of bytes of available space in the BPMP RX buffer */
uint32_t space_avail;
/** @brief Number of bytes that were written to the BPMP RX buffer */
uint8_t len;
} __ABI_PACKED;
/** @private */
struct cmd_ringbuf_console_get_fifo_req {
EMPTY
} __ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief BPMP->Host reply data for request type #CMD_RINGBUF_CONSOLE_GET_FIFO
*/
struct cmd_ringbuf_console_get_fifo_resp {
/** @brief Physical address of the BPMP TX buffer */
uint64_t bpmp_tx_buf_addr;
/** @brief Physical address of the BPMP TX buffer head counter */
uint64_t bpmp_tx_head_addr;
/** @brief Physical address of the BPMP TX buffer tail counter */
uint64_t bpmp_tx_tail_addr;
/** @brief Length of the BPMP TX buffer */
uint32_t bpmp_tx_buf_len;
} __ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief Host->BPMP request data.
*
* Reply type is union #mrq_ringbuf_console_bpmp_to_host_response .
*/
struct mrq_ringbuf_console_host_to_bpmp_request {
/**
* @brief Type of request. Values listed in enum
* #mrq_ringbuf_console_host_to_bpmp_cmd.
*/
uint32_t type;
/** @brief request type specific parameters. */
union {
struct cmd_ringbuf_console_query_abi_req query_abi;
struct cmd_ringbuf_console_read_req read;
struct cmd_ringbuf_console_write_req write;
struct cmd_ringbuf_console_get_fifo_req get_fifo;
} __UNION_ANON;
} __ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief Host->BPMP reply data
*
* In response to struct #mrq_ringbuf_console_host_to_bpmp_request.
*/
union mrq_ringbuf_console_bpmp_to_host_response {
struct cmd_ringbuf_console_query_abi_resp query_abi;
struct cmd_ringbuf_console_read_resp read;
struct cmd_ringbuf_console_write_resp write;
struct cmd_ringbuf_console_get_fifo_resp get_fifo;
} __ABI_PACKED;
/** @} */
/**
* @ingroup MRQ_Codes
* @def MRQ_STRAP
* @brief Set a strap value controlled by BPMP
*
* * Platforms: T194 onwards
* @cond bpmp_t194
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_strap_request
* * Response Payload: N/A
* @addtogroup Strap
*
* A strap is an input that is sampled by a hardware unit during the
* unit's startup process. The sampled value of a strap affects the
* behavior of the unit until the unit is restarted. Many hardware
* units sample their straps at the instant that their resets are
* deasserted.
*
* BPMP owns registers which act as straps to various units. It
* exposes limited control of those straps via #MRQ_STRAP.
*
* @{
*/
enum mrq_strap_cmd {
/** @private */
STRAP_RESERVED = 0,
/** @brief Set a strap value */
STRAP_SET = 1
};
/**
* @brief Request with #MRQ_STRAP
*/
struct mrq_strap_request {
/** @brief @ref mrq_strap_cmd */
uint32_t cmd;
/** @brief Strap ID from @ref Strap_Ids */
uint32_t id;
/** @brief Desired value for strap (if cmd is #STRAP_SET) */
uint32_t value;
} __ABI_PACKED;
/**
* @defgroup Strap_Ids Strap Identifiers
* @}
*/
/** @endcond */
/**
* @ingroup MRQ_Codes
* @def MRQ_UPHY
* @brief Perform a UPHY operation
*
* * Platforms: T194 onwards
* @cond bpmp_t194
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_uphy_request
* * Response Payload: @ref mrq_uphy_response
*
* @addtogroup UPHY
* @{
*/
enum {
CMD_UPHY_PCIE_LANE_MARGIN_CONTROL = 1,
CMD_UPHY_PCIE_LANE_MARGIN_STATUS = 2,
CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT = 3,
CMD_UPHY_PCIE_CONTROLLER_STATE = 4,
CMD_UPHY_MAX,
};
struct cmd_uphy_margin_control_request {
/** @brief Enable margin */
int32_t en;
/** @brief Clear the number of error and sections */
int32_t clr;
/** @brief Set x offset (1's complement) for left/right margin type (y should be 0) */
uint32_t x;
/** @brief Set y offset (1's complement) for left/right margin type (x should be 0) */
uint32_t y;
/** @brief Set number of bit blocks for each margin section */
uint32_t nblks;
} __ABI_PACKED;
struct cmd_uphy_margin_status_response {
/** @brief Number of errors observed */
uint32_t status;
} __ABI_PACKED;
struct cmd_uphy_ep_controller_pll_init_request {
/** @brief EP controller number, valid: 0, 4, 5 */
uint8_t ep_controller;
} __ABI_PACKED;
struct cmd_uphy_pcie_controller_state_request {
/** @brief PCIE controller number, valid: 0, 1, 2, 3, 4 */
uint8_t pcie_controller;
uint8_t enable;
} __ABI_PACKED;
/**
* @ingroup UPHY
* @brief Request with #MRQ_UPHY
*
* Used by the sender of an #MRQ_UPHY message to control UPHY Lane RX margining.
* The uphy_request is split into several sub-commands. Some sub-commands
* require no additional data. Others have a sub-command specific payload
*
* |sub-command |payload |
* |------------------------------------ |----------------------------------------|
* |CMD_UPHY_PCIE_LANE_MARGIN_CONTROL |uphy_set_margin_control |
* |CMD_UPHY_PCIE_LANE_MARGIN_STATUS | |
* |CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT |cmd_uphy_ep_controller_pll_init_request |
* |CMD_UPHY_PCIE_CONTROLLER_STATE |cmd_uphy_pcie_controller_state_request |
*
*/
struct mrq_uphy_request {
/** @brief Lane number. */
uint16_t lane;
/** @brief Sub-command id. */
uint16_t cmd;
union {
struct cmd_uphy_margin_control_request uphy_set_margin_control;
struct cmd_uphy_ep_controller_pll_init_request ep_ctrlr_pll_init;
struct cmd_uphy_pcie_controller_state_request controller_state;
} __UNION_ANON;
} __ABI_PACKED;
/**
* @ingroup UPHY
* @brief Response to MRQ_UPHY
*
* Each sub-command supported by @ref mrq_uphy_request may return
* sub-command-specific data. Some do and some do not as indicated in
* the following table
*
* |sub-command |payload |
* |---------------------------- |------------------------|
* |CMD_UPHY_PCIE_LANE_MARGIN_CONTROL | |
* |CMD_UPHY_PCIE_LANE_MARGIN_STATUS |uphy_get_margin_status |
*
*/
struct mrq_uphy_response {
union {
struct cmd_uphy_margin_status_response uphy_get_margin_status;
} __UNION_ANON;
} __ABI_PACKED;
/** @} */
/** @endcond */
/**
* @ingroup MRQ_Codes
* @def MRQ_FMON
* @brief Perform a frequency monitor configuration operations
*
* * Platforms: T194 onwards
* @cond bpmp_t194
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_fmon_request
* * Response Payload: @ref mrq_fmon_response
*
* @addtogroup FMON
* @{
*/
enum {
/**
* @brief Clamp FMON configuration to specified rate.
*
* The monitored clock must be running for clamp to succeed. If
* clamped, FMON configuration is preserved when clock rate
* and/or state is changed.
*/
CMD_FMON_GEAR_CLAMP = 1,
/**
* @brief Release clamped FMON configuration.
*
* Allow FMON configuration to follow monitored clock rate
* and/or state changes.
*/
CMD_FMON_GEAR_FREE = 2,
/**
* @brief Return rate FMON is clamped at, or 0 if FMON is not
* clamped.
*
* Inherently racy, since clamp state can be changed
* concurrently. Useful for testing.
*/
CMD_FMON_GEAR_GET = 3,
CMD_FMON_NUM,
};
struct cmd_fmon_gear_clamp_request {
int32_t unused;
int64_t rate;
} __ABI_PACKED;
/** @private */
struct cmd_fmon_gear_clamp_response {
EMPTY
} __ABI_PACKED;
/** @private */
struct cmd_fmon_gear_free_request {
EMPTY
} __ABI_PACKED;
/** @private */
struct cmd_fmon_gear_free_response {
EMPTY
} __ABI_PACKED;
/** @private */
struct cmd_fmon_gear_get_request {
EMPTY
} __ABI_PACKED;
struct cmd_fmon_gear_get_response {
int64_t rate;
} __ABI_PACKED;
/**
* @ingroup FMON
* @brief Request with #MRQ_FMON
*
* Used by the sender of an #MRQ_FMON message to configure clock
* frequency monitors. The FMON request is split into several
* sub-commands. Some sub-commands require no additional data.
* Others have a sub-command specific payload
*
* |sub-command |payload |
* |----------------------------|-----------------------|
* |CMD_FMON_GEAR_CLAMP |fmon_gear_clamp |
* |CMD_FMON_GEAR_FREE |- |
* |CMD_FMON_GEAR_GET |- |
*
*/
struct mrq_fmon_request {
/** @brief Sub-command and clock id concatenated to 32-bit word.
* - bits[31..24] is the sub-cmd.
* - bits[23..0] is monitored clock id used to select target
* FMON
*/
uint32_t cmd_and_id;
union {
struct cmd_fmon_gear_clamp_request fmon_gear_clamp;
/** @private */
struct cmd_fmon_gear_free_request fmon_gear_free;
/** @private */
struct cmd_fmon_gear_get_request fmon_gear_get;
} __UNION_ANON;
} __ABI_PACKED;
/**
* @ingroup FMON
* @brief Response to MRQ_FMON
*
* Each sub-command supported by @ref mrq_fmon_request may
* return sub-command-specific data as indicated below.
*
* |sub-command |payload |
* |----------------------------|------------------------|
* |CMD_FMON_GEAR_CLAMP |- |
* |CMD_FMON_GEAR_FREE |- |
* |CMD_FMON_GEAR_GET |fmon_gear_get |
*
*/
struct mrq_fmon_response {
union {
/** @private */
struct cmd_fmon_gear_clamp_response fmon_gear_clamp;
/** @private */
struct cmd_fmon_gear_free_response fmon_gear_free;
struct cmd_fmon_gear_get_response fmon_gear_get;
} __UNION_ANON;
} __ABI_PACKED;
/** @} */
/** @endcond */
/**
* @ingroup MRQ_Codes
* @def MRQ_EC
* @brief Provide status information on faults reported by Error
* Collator (EC) to HSM.
*
* * Platforms: T194 onwards
* @cond bpmp_t194
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_ec_request
* * Response Payload: @ref mrq_ec_response
*
* @note This MRQ ABI is under construction, and subject to change
*
* @addtogroup EC
* @{
*/
enum {
/**
* @brief Retrieve specified EC status.
*
* mrq_response::err is 0 if the operation was successful, or @n
* -#BPMP_ENODEV if target EC is not owned by BPMP @n
* -#BPMP_EACCES if target EC power domain is turned off
*/
CMD_EC_STATUS_GET = 1,
CMD_EC_NUM,
};
/** @brief BPMP ECs error types */
enum bpmp_ec_err_type {
/** @brief Parity error on internal data path
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_PARITY_INTERNAL = 1,
/** @brief ECC SEC error on internal data path
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_ECC_SEC_INTERNAL = 2,
/** @brief ECC DED error on internal data path
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_ECC_DED_INTERNAL = 3,
/** @brief Comparator error
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_COMPARATOR = 4,
/** @brief Register parity error
*
* Error descriptor @ref ec_err_reg_parity_desc.
*/
EC_ERR_TYPE_REGISTER_PARITY = 5,
/** @brief Parity error from on-chip SRAM/FIFO
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_PARITY_SRAM = 6,
/** @brief Clock Monitor error
*
* Error descriptor @ref ec_err_fmon_desc.
*/
EC_ERR_TYPE_CLOCK_MONITOR = 9,
/** @brief Voltage Monitor error
*
* Error descriptor @ref ec_err_vmon_desc.
*/
EC_ERR_TYPE_VOLTAGE_MONITOR = 10,
/** @brief SW Correctable error
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_SW_CORRECTABLE = 16,
/** @brief SW Uncorrectable error
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_SW_UNCORRECTABLE = 17,
/** @brief Other HW Correctable error
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_OTHER_HW_CORRECTABLE = 32,
/** @brief Other HW Uncorrectable error
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_OTHER_HW_UNCORRECTABLE = 33,
};
/** @brief Group of registers with parity error. */
enum ec_registers_group {
/** @brief Functional registers group */
EC_ERR_GROUP_FUNC_REG = 0,
/** @brief SCR registers group */
EC_ERR_GROUP_SCR_REG = 1,
};
/**
* @defgroup bpmp_ec_status_flags EC Status Flags
* @addtogroup bpmp_ec_status_flags
* @{
*/
/** @brief No EC error found flag */
#define EC_STATUS_FLAG_NO_ERROR 0x0001
/** @brief Last EC error found flag */
#define EC_STATUS_FLAG_LAST_ERROR 0x0002
/** @brief EC latent error flag */
#define EC_STATUS_FLAG_LATENT_ERROR 0x0004
/** @} */
/**
* @defgroup bpmp_ec_desc_flags EC Descriptor Flags
* @addtogroup bpmp_ec_desc_flags
* @{
*/
/** @brief EC descriptor error resolved flag */
#define EC_DESC_FLAG_RESOLVED 0x0001
/** @brief EC descriptor failed to retrieve id flag */
#define EC_DESC_FLAG_NO_ID 0x0002
/** @} */
/**
* |error type | fmon_clk_id values |
* |---------------------------------|---------------------------|
* |@ref EC_ERR_TYPE_CLOCK_MONITOR |@ref bpmp_clock_ids |
*/
struct ec_err_fmon_desc {
/** @brief Bitmask of @ref bpmp_ec_desc_flags */
uint16_t desc_flags;
/** @brief FMON monitored clock id */
uint16_t fmon_clk_id;
/** @brief Bitmask of @ref bpmp_fmon_faults_flags */
uint32_t fmon_faults;
/** @brief FMON faults access error */
int32_t fmon_access_error;
} __ABI_PACKED;
/**
* |error type | vmon_adc_id values |
* |---------------------------------|---------------------------|
* |@ref EC_ERR_TYPE_VOLTAGE_MONITOR |@ref bpmp_adc_ids |
*/
struct ec_err_vmon_desc {
/** @brief Bitmask of @ref bpmp_ec_desc_flags */
uint16_t desc_flags;
/** @brief VMON rail adc id */
uint16_t vmon_adc_id;
/** @brief Bitmask of @ref bpmp_vmon_faults_flags */
uint32_t vmon_faults;
/** @brief VMON faults access error */
int32_t vmon_access_error;
} __ABI_PACKED;
/**
* |error type | reg_id values |
* |---------------------------------|---------------------------|
* |@ref EC_ERR_TYPE_REGISTER_PARITY |@ref bpmp_ec_registers_ids |
*/
struct ec_err_reg_parity_desc {
/** @brief Bitmask of @ref bpmp_ec_desc_flags */
uint16_t desc_flags;
/** @brief Register id */
uint16_t reg_id;
/** @brief Register group @ref ec_registers_group */
uint16_t reg_group;
} __ABI_PACKED;
/**
* |error type | err_source_id values |
* |----------------------------------------|---------------------------|
* |@ref EC_ERR_TYPE_PARITY_INTERNAL |@ref bpmp_ec_ipath_ids |
* |@ref EC_ERR_TYPE_ECC_SEC_INTERNAL |@ref bpmp_ec_ipath_ids |
* |@ref EC_ERR_TYPE_ECC_DED_INTERNAL |@ref bpmp_ec_ipath_ids |
* |@ref EC_ERR_TYPE_COMPARATOR |@ref bpmp_ec_comparator_ids|
* |@ref EC_ERR_TYPE_PARITY_SRAM |@ref bpmp_clock_ids |
* |@ref EC_ERR_TYPE_SW_CORRECTABLE |@ref bpmp_ec_misc_ids |
* |@ref EC_ERR_TYPE_SW_UNCORRECTABLE |@ref bpmp_ec_misc_ids |
* |@ref EC_ERR_TYPE_OTHER_HW_CORRECTABLE |@ref bpmp_ec_misc_ids |
* |@ref EC_ERR_TYPE_OTHER_HW_UNCORRECTABLE |@ref bpmp_ec_misc_ids |
*/
struct ec_err_simple_desc {
/** @brief Bitmask of @ref bpmp_ec_desc_flags */
uint16_t desc_flags;
/** @brief Error source id. Id space depends on error type. */
uint16_t err_source_id;
} __ABI_PACKED;
/** @brief Union of EC error descriptors */
union ec_err_desc {
struct ec_err_fmon_desc fmon_desc;
struct ec_err_vmon_desc vmon_desc;
struct ec_err_reg_parity_desc reg_parity_desc;
struct ec_err_simple_desc simple_desc;
} __ABI_PACKED;
struct cmd_ec_status_get_request {
/** @brief HSM error line number that identifies target EC. */
uint32_t ec_hsm_id;
} __ABI_PACKED;
/** EC status maximum number of descriptors */
#define EC_ERR_STATUS_DESC_MAX_NUM 4
struct cmd_ec_status_get_response {
/** @brief Target EC id (the same id received with request). */
uint32_t ec_hsm_id;
/**
* @brief Bitmask of @ref bpmp_ec_status_flags
*
* If NO_ERROR flag is set, error_ fields should be ignored
*/
uint32_t ec_status_flags;
/** @brief Found EC error index. */
uint32_t error_idx;
/** @brief Found EC error type @ref bpmp_ec_err_type. */
uint32_t error_type;
/** @brief Number of returned EC error descriptors */
uint32_t error_desc_num;
/** @brief EC error descriptors */
union ec_err_desc error_descs[EC_ERR_STATUS_DESC_MAX_NUM];
} __ABI_PACKED;
/**
* @ingroup EC
* @brief Request with #MRQ_EC
*
* Used by the sender of an #MRQ_EC message to access ECs owned
* by BPMP.
*
* |sub-command |payload |
* |----------------------------|-----------------------|
* |@ref CMD_EC_STATUS_GET |ec_status_get |
*
*/
struct mrq_ec_request {
/** @brief Sub-command id. */
uint32_t cmd_id;
union {
struct cmd_ec_status_get_request ec_status_get;
} __UNION_ANON;
} __ABI_PACKED;
/**
* @ingroup EC
* @brief Response to MRQ_EC
*
* Each sub-command supported by @ref mrq_ec_request may return
* sub-command-specific data as indicated below.
*
* |sub-command |payload |
* |----------------------------|------------------------|
* |@ref CMD_EC_STATUS_GET |ec_status_get |
*
*/
struct mrq_ec_response {
union {
struct cmd_ec_status_get_response ec_status_get;
} __UNION_ANON;
} __ABI_PACKED;
/** @} */
/** @endcond */
/**
* @ingroup MRQ_Codes
* @def MRQ_FBVOLT_STATUS
* @brief Provides status information about voltage state for fuse burning
*
* * Platforms: T194 onwards
* @cond bpmp_t194
* * Initiators: CCPLEX
* * Target: BPMP
* * Request Payload: None
* * Response Payload: @ref mrq_fbvolt_status_response
* @{
*/
/**
* @ingroup Fbvolt_status
* @brief Response to #MRQ_FBVOLT_STATUS
*
* Value of #ready reflects if core voltages are in a suitable state for buring
* fuses. A value of 0x1 indicates that core voltages are ready for burning
* fuses. A value of 0x0 indicates that core voltages are not ready.
*/
struct mrq_fbvolt_status_response {
/** @brief Bit [0:0] - ready status, bits [31:1] - reserved */
uint32_t ready;
/** @brief Reserved */
uint32_t unused;
} __ABI_PACKED;
/** @} */
/** @endcond */
/**
* @addtogroup Error_Codes
* Negative values for mrq_response::err generally indicate some
* error. The ABI defines the following error codes. Negating these
* defines is an exercise left to the user.
* @{
*/
/** @brief No such file or directory */
#define BPMP_ENOENT 2
/** @brief No MRQ handler */
#define BPMP_ENOHANDLER 3
/** @brief I/O error */
#define BPMP_EIO 5
/** @brief Bad sub-MRQ command */
#define BPMP_EBADCMD 6
/** @brief Not enough memory */
#define BPMP_ENOMEM 12
/** @brief Permission denied */
#define BPMP_EACCES 13
/** @brief Bad address */
#define BPMP_EFAULT 14
/** @brief No such device */
#define BPMP_ENODEV 19
/** @brief Argument is a directory */
#define BPMP_EISDIR 21
/** @brief Invalid argument */
#define BPMP_EINVAL 22
/** @brief Timeout during operation */
#define BPMP_ETIMEDOUT 23
/** @brief Out of range */
#define BPMP_ERANGE 34
/** @brief Function not implemented */
#define BPMP_ENOSYS 38
/** @brief Invalid slot */
#define BPMP_EBADSLT 57
/** @} */
#endif
View Git Blame Copy Permalink