forked from luck/tmp_suning_uos_patched
415cb80037
The ocfs2 write code loops through a page much like the block code, except that ocfs2 allocation units can be any size, including larger than page size. Typically it's equal to or larger than page size - most kernels run 4k pages, the minimum ocfs2 allocation (cluster) size. Some changes introduced during 2.6.23 changed the way writes to pages are handled, and inadvertantly broke support for > 4k page size. Instead of just writing one cluster at a time, we now handle the whole page in one pass. This means that multiple (small) seperate allocations might happen in the same pass. The allocation code howver typically optimizes by getting the maximum which was reserved. This triggered a BUG_ON in the extend code where it'd ask for a single bit (for one part of a > 4k page) and get back more than it asked for. Fix this by providing a variant of the high level allocation function which allows the caller to specify a maximum. The traditional function remains and just calls the new one with a maximum determined from the initial reservation. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2411 lines
56 KiB
C
2411 lines
56 KiB
C
/* -*- mode: c; c-basic-offset: 8; -*-
|
|
* vim: noexpandtab sw=8 ts=8 sts=0:
|
|
*
|
|
* file.c
|
|
*
|
|
* File open, close, extend, truncate
|
|
*
|
|
* Copyright (C) 2002, 2004 Oracle. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2 of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public
|
|
* License along with this program; if not, write to the
|
|
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
|
|
* Boston, MA 021110-1307, USA.
|
|
*/
|
|
|
|
#include <linux/capability.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/types.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/highmem.h>
|
|
#include <linux/pagemap.h>
|
|
#include <linux/uio.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/splice.h>
|
|
#include <linux/mount.h>
|
|
#include <linux/writeback.h>
|
|
#include <linux/falloc.h>
|
|
|
|
#define MLOG_MASK_PREFIX ML_INODE
|
|
#include <cluster/masklog.h>
|
|
|
|
#include "ocfs2.h"
|
|
|
|
#include "alloc.h"
|
|
#include "aops.h"
|
|
#include "dir.h"
|
|
#include "dlmglue.h"
|
|
#include "extent_map.h"
|
|
#include "file.h"
|
|
#include "sysfile.h"
|
|
#include "inode.h"
|
|
#include "ioctl.h"
|
|
#include "journal.h"
|
|
#include "mmap.h"
|
|
#include "suballoc.h"
|
|
#include "super.h"
|
|
|
|
#include "buffer_head_io.h"
|
|
|
|
static int ocfs2_sync_inode(struct inode *inode)
|
|
{
|
|
filemap_fdatawrite(inode->i_mapping);
|
|
return sync_mapping_buffers(inode->i_mapping);
|
|
}
|
|
|
|
static int ocfs2_file_open(struct inode *inode, struct file *file)
|
|
{
|
|
int status;
|
|
int mode = file->f_flags;
|
|
struct ocfs2_inode_info *oi = OCFS2_I(inode);
|
|
|
|
mlog_entry("(0x%p, 0x%p, '%.*s')\n", inode, file,
|
|
file->f_path.dentry->d_name.len, file->f_path.dentry->d_name.name);
|
|
|
|
spin_lock(&oi->ip_lock);
|
|
|
|
/* Check that the inode hasn't been wiped from disk by another
|
|
* node. If it hasn't then we're safe as long as we hold the
|
|
* spin lock until our increment of open count. */
|
|
if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_DELETED) {
|
|
spin_unlock(&oi->ip_lock);
|
|
|
|
status = -ENOENT;
|
|
goto leave;
|
|
}
|
|
|
|
if (mode & O_DIRECT)
|
|
oi->ip_flags |= OCFS2_INODE_OPEN_DIRECT;
|
|
|
|
oi->ip_open_count++;
|
|
spin_unlock(&oi->ip_lock);
|
|
status = 0;
|
|
leave:
|
|
mlog_exit(status);
|
|
return status;
|
|
}
|
|
|
|
static int ocfs2_file_release(struct inode *inode, struct file *file)
|
|
{
|
|
struct ocfs2_inode_info *oi = OCFS2_I(inode);
|
|
|
|
mlog_entry("(0x%p, 0x%p, '%.*s')\n", inode, file,
|
|
file->f_path.dentry->d_name.len,
|
|
file->f_path.dentry->d_name.name);
|
|
|
|
spin_lock(&oi->ip_lock);
|
|
if (!--oi->ip_open_count)
|
|
oi->ip_flags &= ~OCFS2_INODE_OPEN_DIRECT;
|
|
spin_unlock(&oi->ip_lock);
|
|
|
|
mlog_exit(0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ocfs2_sync_file(struct file *file,
|
|
struct dentry *dentry,
|
|
int datasync)
|
|
{
|
|
int err = 0;
|
|
journal_t *journal;
|
|
struct inode *inode = dentry->d_inode;
|
|
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
|
|
|
|
mlog_entry("(0x%p, 0x%p, %d, '%.*s')\n", file, dentry, datasync,
|
|
dentry->d_name.len, dentry->d_name.name);
|
|
|
|
err = ocfs2_sync_inode(dentry->d_inode);
|
|
if (err)
|
|
goto bail;
|
|
|
|
journal = osb->journal->j_journal;
|
|
err = journal_force_commit(journal);
|
|
|
|
bail:
|
|
mlog_exit(err);
|
|
|
|
return (err < 0) ? -EIO : 0;
|
|
}
|
|
|
|
int ocfs2_should_update_atime(struct inode *inode,
|
|
struct vfsmount *vfsmnt)
|
|
{
|
|
struct timespec now;
|
|
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
|
|
|
|
if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb))
|
|
return 0;
|
|
|
|
if ((inode->i_flags & S_NOATIME) ||
|
|
((inode->i_sb->s_flags & MS_NODIRATIME) && S_ISDIR(inode->i_mode)))
|
|
return 0;
|
|
|
|
/*
|
|
* We can be called with no vfsmnt structure - NFSD will
|
|
* sometimes do this.
|
|
*
|
|
* Note that our action here is different than touch_atime() -
|
|
* if we can't tell whether this is a noatime mount, then we
|
|
* don't know whether to trust the value of s_atime_quantum.
|
|
*/
|
|
if (vfsmnt == NULL)
|
|
return 0;
|
|
|
|
if ((vfsmnt->mnt_flags & MNT_NOATIME) ||
|
|
((vfsmnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode)))
|
|
return 0;
|
|
|
|
if (vfsmnt->mnt_flags & MNT_RELATIME) {
|
|
if ((timespec_compare(&inode->i_atime, &inode->i_mtime) <= 0) ||
|
|
(timespec_compare(&inode->i_atime, &inode->i_ctime) <= 0))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
now = CURRENT_TIME;
|
|
if ((now.tv_sec - inode->i_atime.tv_sec <= osb->s_atime_quantum))
|
|
return 0;
|
|
else
|
|
return 1;
|
|
}
|
|
|
|
int ocfs2_update_inode_atime(struct inode *inode,
|
|
struct buffer_head *bh)
|
|
{
|
|
int ret;
|
|
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
|
|
handle_t *handle;
|
|
struct ocfs2_dinode *di = (struct ocfs2_dinode *) bh->b_data;
|
|
|
|
mlog_entry_void();
|
|
|
|
handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
|
|
if (handle == NULL) {
|
|
ret = -ENOMEM;
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = ocfs2_journal_access(handle, inode, bh,
|
|
OCFS2_JOURNAL_ACCESS_WRITE);
|
|
if (ret) {
|
|
mlog_errno(ret);
|
|
goto out_commit;
|
|
}
|
|
|
|
/*
|
|
* Don't use ocfs2_mark_inode_dirty() here as we don't always
|
|
* have i_mutex to guard against concurrent changes to other
|
|
* inode fields.
|
|
*/
|
|
inode->i_atime = CURRENT_TIME;
|
|
di->i_atime = cpu_to_le64(inode->i_atime.tv_sec);
|
|
di->i_atime_nsec = cpu_to_le32(inode->i_atime.tv_nsec);
|
|
|
|
ret = ocfs2_journal_dirty(handle, bh);
|
|
if (ret < 0)
|
|
mlog_errno(ret);
|
|
|
|
out_commit:
|
|
ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
|
|
out:
|
|
mlog_exit(ret);
|
|
return ret;
|
|
}
|
|
|
|
static int ocfs2_set_inode_size(handle_t *handle,
|
|
struct inode *inode,
|
|
struct buffer_head *fe_bh,
|
|
u64 new_i_size)
|
|
{
|
|
int status;
|
|
|
|
mlog_entry_void();
|
|
i_size_write(inode, new_i_size);
|
|
inode->i_blocks = ocfs2_inode_sector_count(inode);
|
|
inode->i_ctime = inode->i_mtime = CURRENT_TIME;
|
|
|
|
status = ocfs2_mark_inode_dirty(handle, inode, fe_bh);
|
|
if (status < 0) {
|
|
mlog_errno(status);
|
|
goto bail;
|
|
}
|
|
|
|
bail:
|
|
mlog_exit(status);
|
|
return status;
|
|
}
|
|
|
|
static int ocfs2_simple_size_update(struct inode *inode,
|
|
struct buffer_head *di_bh,
|
|
u64 new_i_size)
|
|
{
|
|
int ret;
|
|
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
|
|
handle_t *handle = NULL;
|
|
|
|
handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
|
|
if (handle == NULL) {
|
|
ret = -ENOMEM;
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = ocfs2_set_inode_size(handle, inode, di_bh,
|
|
new_i_size);
|
|
if (ret < 0)
|
|
mlog_errno(ret);
|
|
|
|
ocfs2_commit_trans(osb, handle);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int ocfs2_orphan_for_truncate(struct ocfs2_super *osb,
|
|
struct inode *inode,
|
|
struct buffer_head *fe_bh,
|
|
u64 new_i_size)
|
|
{
|
|
int status;
|
|
handle_t *handle;
|
|
struct ocfs2_dinode *di;
|
|
u64 cluster_bytes;
|
|
|
|
mlog_entry_void();
|
|
|
|
/* TODO: This needs to actually orphan the inode in this
|
|
* transaction. */
|
|
|
|
handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
|
|
if (IS_ERR(handle)) {
|
|
status = PTR_ERR(handle);
|
|
mlog_errno(status);
|
|
goto out;
|
|
}
|
|
|
|
status = ocfs2_journal_access(handle, inode, fe_bh,
|
|
OCFS2_JOURNAL_ACCESS_WRITE);
|
|
if (status < 0) {
|
|
mlog_errno(status);
|
|
goto out_commit;
|
|
}
|
|
|
|
/*
|
|
* Do this before setting i_size.
|
|
*/
|
|
cluster_bytes = ocfs2_align_bytes_to_clusters(inode->i_sb, new_i_size);
|
|
status = ocfs2_zero_range_for_truncate(inode, handle, new_i_size,
|
|
cluster_bytes);
|
|
if (status) {
|
|
mlog_errno(status);
|
|
goto out_commit;
|
|
}
|
|
|
|
i_size_write(inode, new_i_size);
|
|
inode->i_ctime = inode->i_mtime = CURRENT_TIME;
|
|
|
|
di = (struct ocfs2_dinode *) fe_bh->b_data;
|
|
di->i_size = cpu_to_le64(new_i_size);
|
|
di->i_ctime = di->i_mtime = cpu_to_le64(inode->i_ctime.tv_sec);
|
|
di->i_ctime_nsec = di->i_mtime_nsec = cpu_to_le32(inode->i_ctime.tv_nsec);
|
|
|
|
status = ocfs2_journal_dirty(handle, fe_bh);
|
|
if (status < 0)
|
|
mlog_errno(status);
|
|
|
|
out_commit:
|
|
ocfs2_commit_trans(osb, handle);
|
|
out:
|
|
|
|
mlog_exit(status);
|
|
return status;
|
|
}
|
|
|
|
static int ocfs2_truncate_file(struct inode *inode,
|
|
struct buffer_head *di_bh,
|
|
u64 new_i_size)
|
|
{
|
|
int status = 0;
|
|
struct ocfs2_dinode *fe = NULL;
|
|
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
|
|
struct ocfs2_truncate_context *tc = NULL;
|
|
|
|
mlog_entry("(inode = %llu, new_i_size = %llu\n",
|
|
(unsigned long long)OCFS2_I(inode)->ip_blkno,
|
|
(unsigned long long)new_i_size);
|
|
|
|
fe = (struct ocfs2_dinode *) di_bh->b_data;
|
|
if (!OCFS2_IS_VALID_DINODE(fe)) {
|
|
OCFS2_RO_ON_INVALID_DINODE(inode->i_sb, fe);
|
|
status = -EIO;
|
|
goto bail;
|
|
}
|
|
|
|
mlog_bug_on_msg(le64_to_cpu(fe->i_size) != i_size_read(inode),
|
|
"Inode %llu, inode i_size = %lld != di "
|
|
"i_size = %llu, i_flags = 0x%x\n",
|
|
(unsigned long long)OCFS2_I(inode)->ip_blkno,
|
|
i_size_read(inode),
|
|
(unsigned long long)le64_to_cpu(fe->i_size),
|
|
le32_to_cpu(fe->i_flags));
|
|
|
|
if (new_i_size > le64_to_cpu(fe->i_size)) {
|
|
mlog(0, "asked to truncate file with size (%llu) to size (%llu)!\n",
|
|
(unsigned long long)le64_to_cpu(fe->i_size),
|
|
(unsigned long long)new_i_size);
|
|
status = -EINVAL;
|
|
mlog_errno(status);
|
|
goto bail;
|
|
}
|
|
|
|
mlog(0, "inode %llu, i_size = %llu, new_i_size = %llu\n",
|
|
(unsigned long long)le64_to_cpu(fe->i_blkno),
|
|
(unsigned long long)le64_to_cpu(fe->i_size),
|
|
(unsigned long long)new_i_size);
|
|
|
|
/* lets handle the simple truncate cases before doing any more
|
|
* cluster locking. */
|
|
if (new_i_size == le64_to_cpu(fe->i_size))
|
|
goto bail;
|
|
|
|
down_write(&OCFS2_I(inode)->ip_alloc_sem);
|
|
|
|
/* This forces other nodes to sync and drop their pages. Do
|
|
* this even if we have a truncate without allocation change -
|
|
* ocfs2 cluster sizes can be much greater than page size, so
|
|
* we have to truncate them anyway. */
|
|
status = ocfs2_data_lock(inode, 1);
|
|
if (status < 0) {
|
|
up_write(&OCFS2_I(inode)->ip_alloc_sem);
|
|
|
|
mlog_errno(status);
|
|
goto bail;
|
|
}
|
|
|
|
unmap_mapping_range(inode->i_mapping, new_i_size + PAGE_SIZE - 1, 0, 1);
|
|
truncate_inode_pages(inode->i_mapping, new_i_size);
|
|
|
|
/* alright, we're going to need to do a full blown alloc size
|
|
* change. Orphan the inode so that recovery can complete the
|
|
* truncate if necessary. This does the task of marking
|
|
* i_size. */
|
|
status = ocfs2_orphan_for_truncate(osb, inode, di_bh, new_i_size);
|
|
if (status < 0) {
|
|
mlog_errno(status);
|
|
goto bail_unlock_data;
|
|
}
|
|
|
|
status = ocfs2_prepare_truncate(osb, inode, di_bh, &tc);
|
|
if (status < 0) {
|
|
mlog_errno(status);
|
|
goto bail_unlock_data;
|
|
}
|
|
|
|
status = ocfs2_commit_truncate(osb, inode, di_bh, tc);
|
|
if (status < 0) {
|
|
mlog_errno(status);
|
|
goto bail_unlock_data;
|
|
}
|
|
|
|
/* TODO: orphan dir cleanup here. */
|
|
bail_unlock_data:
|
|
ocfs2_data_unlock(inode, 1);
|
|
|
|
up_write(&OCFS2_I(inode)->ip_alloc_sem);
|
|
|
|
bail:
|
|
|
|
mlog_exit(status);
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* extend allocation only here.
|
|
* we'll update all the disk stuff, and oip->alloc_size
|
|
*
|
|
* expect stuff to be locked, a transaction started and enough data /
|
|
* metadata reservations in the contexts.
|
|
*
|
|
* Will return -EAGAIN, and a reason if a restart is needed.
|
|
* If passed in, *reason will always be set, even in error.
|
|
*/
|
|
int ocfs2_do_extend_allocation(struct ocfs2_super *osb,
|
|
struct inode *inode,
|
|
u32 *logical_offset,
|
|
u32 clusters_to_add,
|
|
int mark_unwritten,
|
|
struct buffer_head *fe_bh,
|
|
handle_t *handle,
|
|
struct ocfs2_alloc_context *data_ac,
|
|
struct ocfs2_alloc_context *meta_ac,
|
|
enum ocfs2_alloc_restarted *reason_ret)
|
|
{
|
|
int status = 0;
|
|
int free_extents;
|
|
struct ocfs2_dinode *fe = (struct ocfs2_dinode *) fe_bh->b_data;
|
|
enum ocfs2_alloc_restarted reason = RESTART_NONE;
|
|
u32 bit_off, num_bits;
|
|
u64 block;
|
|
u8 flags = 0;
|
|
|
|
BUG_ON(!clusters_to_add);
|
|
|
|
if (mark_unwritten)
|
|
flags = OCFS2_EXT_UNWRITTEN;
|
|
|
|
free_extents = ocfs2_num_free_extents(osb, inode, fe);
|
|
if (free_extents < 0) {
|
|
status = free_extents;
|
|
mlog_errno(status);
|
|
goto leave;
|
|
}
|
|
|
|
/* there are two cases which could cause us to EAGAIN in the
|
|
* we-need-more-metadata case:
|
|
* 1) we haven't reserved *any*
|
|
* 2) we are so fragmented, we've needed to add metadata too
|
|
* many times. */
|
|
if (!free_extents && !meta_ac) {
|
|
mlog(0, "we haven't reserved any metadata!\n");
|
|
status = -EAGAIN;
|
|
reason = RESTART_META;
|
|
goto leave;
|
|
} else if ((!free_extents)
|
|
&& (ocfs2_alloc_context_bits_left(meta_ac)
|
|
< ocfs2_extend_meta_needed(fe))) {
|
|
mlog(0, "filesystem is really fragmented...\n");
|
|
status = -EAGAIN;
|
|
reason = RESTART_META;
|
|
goto leave;
|
|
}
|
|
|
|
status = __ocfs2_claim_clusters(osb, handle, data_ac, 1,
|
|
clusters_to_add, &bit_off, &num_bits);
|
|
if (status < 0) {
|
|
if (status != -ENOSPC)
|
|
mlog_errno(status);
|
|
goto leave;
|
|
}
|
|
|
|
BUG_ON(num_bits > clusters_to_add);
|
|
|
|
/* reserve our write early -- insert_extent may update the inode */
|
|
status = ocfs2_journal_access(handle, inode, fe_bh,
|
|
OCFS2_JOURNAL_ACCESS_WRITE);
|
|
if (status < 0) {
|
|
mlog_errno(status);
|
|
goto leave;
|
|
}
|
|
|
|
block = ocfs2_clusters_to_blocks(osb->sb, bit_off);
|
|
mlog(0, "Allocating %u clusters at block %u for inode %llu\n",
|
|
num_bits, bit_off, (unsigned long long)OCFS2_I(inode)->ip_blkno);
|
|
status = ocfs2_insert_extent(osb, handle, inode, fe_bh,
|
|
*logical_offset, block, num_bits,
|
|
flags, meta_ac);
|
|
if (status < 0) {
|
|
mlog_errno(status);
|
|
goto leave;
|
|
}
|
|
|
|
status = ocfs2_journal_dirty(handle, fe_bh);
|
|
if (status < 0) {
|
|
mlog_errno(status);
|
|
goto leave;
|
|
}
|
|
|
|
clusters_to_add -= num_bits;
|
|
*logical_offset += num_bits;
|
|
|
|
if (clusters_to_add) {
|
|
mlog(0, "need to alloc once more, clusters = %u, wanted = "
|
|
"%u\n", fe->i_clusters, clusters_to_add);
|
|
status = -EAGAIN;
|
|
reason = RESTART_TRANS;
|
|
}
|
|
|
|
leave:
|
|
mlog_exit(status);
|
|
if (reason_ret)
|
|
*reason_ret = reason;
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* For a given allocation, determine which allocators will need to be
|
|
* accessed, and lock them, reserving the appropriate number of bits.
|
|
*
|
|
* Sparse file systems call this from ocfs2_write_begin_nolock()
|
|
* and ocfs2_allocate_unwritten_extents().
|
|
*
|
|
* File systems which don't support holes call this from
|
|
* ocfs2_extend_allocation().
|
|
*/
|
|
int ocfs2_lock_allocators(struct inode *inode, struct ocfs2_dinode *di,
|
|
u32 clusters_to_add, u32 extents_to_split,
|
|
struct ocfs2_alloc_context **data_ac,
|
|
struct ocfs2_alloc_context **meta_ac)
|
|
{
|
|
int ret = 0, num_free_extents;
|
|
unsigned int max_recs_needed = clusters_to_add + 2 * extents_to_split;
|
|
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
|
|
|
|
*meta_ac = NULL;
|
|
if (data_ac)
|
|
*data_ac = NULL;
|
|
|
|
BUG_ON(clusters_to_add != 0 && data_ac == NULL);
|
|
|
|
mlog(0, "extend inode %llu, i_size = %lld, di->i_clusters = %u, "
|
|
"clusters_to_add = %u, extents_to_split = %u\n",
|
|
(unsigned long long)OCFS2_I(inode)->ip_blkno, i_size_read(inode),
|
|
le32_to_cpu(di->i_clusters), clusters_to_add, extents_to_split);
|
|
|
|
num_free_extents = ocfs2_num_free_extents(osb, inode, di);
|
|
if (num_free_extents < 0) {
|
|
ret = num_free_extents;
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Sparse allocation file systems need to be more conservative
|
|
* with reserving room for expansion - the actual allocation
|
|
* happens while we've got a journal handle open so re-taking
|
|
* a cluster lock (because we ran out of room for another
|
|
* extent) will violate ordering rules.
|
|
*
|
|
* Most of the time we'll only be seeing this 1 cluster at a time
|
|
* anyway.
|
|
*
|
|
* Always lock for any unwritten extents - we might want to
|
|
* add blocks during a split.
|
|
*/
|
|
if (!num_free_extents ||
|
|
(ocfs2_sparse_alloc(osb) && num_free_extents < max_recs_needed)) {
|
|
ret = ocfs2_reserve_new_metadata(osb, di, meta_ac);
|
|
if (ret < 0) {
|
|
if (ret != -ENOSPC)
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
if (clusters_to_add == 0)
|
|
goto out;
|
|
|
|
ret = ocfs2_reserve_clusters(osb, clusters_to_add, data_ac);
|
|
if (ret < 0) {
|
|
if (ret != -ENOSPC)
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
if (ret) {
|
|
if (*meta_ac) {
|
|
ocfs2_free_alloc_context(*meta_ac);
|
|
*meta_ac = NULL;
|
|
}
|
|
|
|
/*
|
|
* We cannot have an error and a non null *data_ac.
|
|
*/
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __ocfs2_extend_allocation(struct inode *inode, u32 logical_start,
|
|
u32 clusters_to_add, int mark_unwritten)
|
|
{
|
|
int status = 0;
|
|
int restart_func = 0;
|
|
int credits;
|
|
u32 prev_clusters;
|
|
struct buffer_head *bh = NULL;
|
|
struct ocfs2_dinode *fe = NULL;
|
|
handle_t *handle = NULL;
|
|
struct ocfs2_alloc_context *data_ac = NULL;
|
|
struct ocfs2_alloc_context *meta_ac = NULL;
|
|
enum ocfs2_alloc_restarted why;
|
|
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
|
|
|
|
mlog_entry("(clusters_to_add = %u)\n", clusters_to_add);
|
|
|
|
/*
|
|
* This function only exists for file systems which don't
|
|
* support holes.
|
|
*/
|
|
BUG_ON(mark_unwritten && !ocfs2_sparse_alloc(osb));
|
|
|
|
status = ocfs2_read_block(osb, OCFS2_I(inode)->ip_blkno, &bh,
|
|
OCFS2_BH_CACHED, inode);
|
|
if (status < 0) {
|
|
mlog_errno(status);
|
|
goto leave;
|
|
}
|
|
|
|
fe = (struct ocfs2_dinode *) bh->b_data;
|
|
if (!OCFS2_IS_VALID_DINODE(fe)) {
|
|
OCFS2_RO_ON_INVALID_DINODE(inode->i_sb, fe);
|
|
status = -EIO;
|
|
goto leave;
|
|
}
|
|
|
|
restart_all:
|
|
BUG_ON(le32_to_cpu(fe->i_clusters) != OCFS2_I(inode)->ip_clusters);
|
|
|
|
status = ocfs2_lock_allocators(inode, fe, clusters_to_add, 0, &data_ac,
|
|
&meta_ac);
|
|
if (status) {
|
|
mlog_errno(status);
|
|
goto leave;
|
|
}
|
|
|
|
credits = ocfs2_calc_extend_credits(osb->sb, fe, clusters_to_add);
|
|
handle = ocfs2_start_trans(osb, credits);
|
|
if (IS_ERR(handle)) {
|
|
status = PTR_ERR(handle);
|
|
handle = NULL;
|
|
mlog_errno(status);
|
|
goto leave;
|
|
}
|
|
|
|
restarted_transaction:
|
|
/* reserve a write to the file entry early on - that we if we
|
|
* run out of credits in the allocation path, we can still
|
|
* update i_size. */
|
|
status = ocfs2_journal_access(handle, inode, bh,
|
|
OCFS2_JOURNAL_ACCESS_WRITE);
|
|
if (status < 0) {
|
|
mlog_errno(status);
|
|
goto leave;
|
|
}
|
|
|
|
prev_clusters = OCFS2_I(inode)->ip_clusters;
|
|
|
|
status = ocfs2_do_extend_allocation(osb,
|
|
inode,
|
|
&logical_start,
|
|
clusters_to_add,
|
|
mark_unwritten,
|
|
bh,
|
|
handle,
|
|
data_ac,
|
|
meta_ac,
|
|
&why);
|
|
if ((status < 0) && (status != -EAGAIN)) {
|
|
if (status != -ENOSPC)
|
|
mlog_errno(status);
|
|
goto leave;
|
|
}
|
|
|
|
status = ocfs2_journal_dirty(handle, bh);
|
|
if (status < 0) {
|
|
mlog_errno(status);
|
|
goto leave;
|
|
}
|
|
|
|
spin_lock(&OCFS2_I(inode)->ip_lock);
|
|
clusters_to_add -= (OCFS2_I(inode)->ip_clusters - prev_clusters);
|
|
spin_unlock(&OCFS2_I(inode)->ip_lock);
|
|
|
|
if (why != RESTART_NONE && clusters_to_add) {
|
|
if (why == RESTART_META) {
|
|
mlog(0, "restarting function.\n");
|
|
restart_func = 1;
|
|
} else {
|
|
BUG_ON(why != RESTART_TRANS);
|
|
|
|
mlog(0, "restarting transaction.\n");
|
|
/* TODO: This can be more intelligent. */
|
|
credits = ocfs2_calc_extend_credits(osb->sb,
|
|
fe,
|
|
clusters_to_add);
|
|
status = ocfs2_extend_trans(handle, credits);
|
|
if (status < 0) {
|
|
/* handle still has to be committed at
|
|
* this point. */
|
|
status = -ENOMEM;
|
|
mlog_errno(status);
|
|
goto leave;
|
|
}
|
|
goto restarted_transaction;
|
|
}
|
|
}
|
|
|
|
mlog(0, "fe: i_clusters = %u, i_size=%llu\n",
|
|
le32_to_cpu(fe->i_clusters),
|
|
(unsigned long long)le64_to_cpu(fe->i_size));
|
|
mlog(0, "inode: ip_clusters=%u, i_size=%lld\n",
|
|
OCFS2_I(inode)->ip_clusters, i_size_read(inode));
|
|
|
|
leave:
|
|
if (handle) {
|
|
ocfs2_commit_trans(osb, handle);
|
|
handle = NULL;
|
|
}
|
|
if (data_ac) {
|
|
ocfs2_free_alloc_context(data_ac);
|
|
data_ac = NULL;
|
|
}
|
|
if (meta_ac) {
|
|
ocfs2_free_alloc_context(meta_ac);
|
|
meta_ac = NULL;
|
|
}
|
|
if ((!status) && restart_func) {
|
|
restart_func = 0;
|
|
goto restart_all;
|
|
}
|
|
if (bh) {
|
|
brelse(bh);
|
|
bh = NULL;
|
|
}
|
|
|
|
mlog_exit(status);
|
|
return status;
|
|
}
|
|
|
|
static int ocfs2_extend_allocation(struct inode *inode, u32 logical_start,
|
|
u32 clusters_to_add, int mark_unwritten)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* The alloc sem blocks peope in read/write from reading our
|
|
* allocation until we're done changing it. We depend on
|
|
* i_mutex to block other extend/truncate calls while we're
|
|
* here.
|
|
*/
|
|
down_write(&OCFS2_I(inode)->ip_alloc_sem);
|
|
ret = __ocfs2_extend_allocation(inode, logical_start, clusters_to_add,
|
|
mark_unwritten);
|
|
up_write(&OCFS2_I(inode)->ip_alloc_sem);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Some parts of this taken from generic_cont_expand, which turned out
|
|
* to be too fragile to do exactly what we need without us having to
|
|
* worry about recursive locking in ->prepare_write() and
|
|
* ->commit_write(). */
|
|
static int ocfs2_write_zero_page(struct inode *inode,
|
|
u64 size)
|
|
{
|
|
struct address_space *mapping = inode->i_mapping;
|
|
struct page *page;
|
|
unsigned long index;
|
|
unsigned int offset;
|
|
handle_t *handle = NULL;
|
|
int ret;
|
|
|
|
offset = (size & (PAGE_CACHE_SIZE-1)); /* Within page */
|
|
/* ugh. in prepare/commit_write, if from==to==start of block, we
|
|
** skip the prepare. make sure we never send an offset for the start
|
|
** of a block
|
|
*/
|
|
if ((offset & (inode->i_sb->s_blocksize - 1)) == 0) {
|
|
offset++;
|
|
}
|
|
index = size >> PAGE_CACHE_SHIFT;
|
|
|
|
page = grab_cache_page(mapping, index);
|
|
if (!page) {
|
|
ret = -ENOMEM;
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = ocfs2_prepare_write_nolock(inode, page, offset, offset);
|
|
if (ret < 0) {
|
|
mlog_errno(ret);
|
|
goto out_unlock;
|
|
}
|
|
|
|
if (ocfs2_should_order_data(inode)) {
|
|
handle = ocfs2_start_walk_page_trans(inode, page, offset,
|
|
offset);
|
|
if (IS_ERR(handle)) {
|
|
ret = PTR_ERR(handle);
|
|
handle = NULL;
|
|
goto out_unlock;
|
|
}
|
|
}
|
|
|
|
/* must not update i_size! */
|
|
ret = block_commit_write(page, offset, offset);
|
|
if (ret < 0)
|
|
mlog_errno(ret);
|
|
else
|
|
ret = 0;
|
|
|
|
if (handle)
|
|
ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
|
|
out_unlock:
|
|
unlock_page(page);
|
|
page_cache_release(page);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int ocfs2_zero_extend(struct inode *inode,
|
|
u64 zero_to_size)
|
|
{
|
|
int ret = 0;
|
|
u64 start_off;
|
|
struct super_block *sb = inode->i_sb;
|
|
|
|
start_off = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode));
|
|
while (start_off < zero_to_size) {
|
|
ret = ocfs2_write_zero_page(inode, start_off);
|
|
if (ret < 0) {
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
start_off += sb->s_blocksize;
|
|
|
|
/*
|
|
* Very large extends have the potential to lock up
|
|
* the cpu for extended periods of time.
|
|
*/
|
|
cond_resched();
|
|
}
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* A tail_to_skip value > 0 indicates that we're being called from
|
|
* ocfs2_file_aio_write(). This has the following implications:
|
|
*
|
|
* - we don't want to update i_size
|
|
* - di_bh will be NULL, which is fine because it's only used in the
|
|
* case where we want to update i_size.
|
|
* - ocfs2_zero_extend() will then only be filling the hole created
|
|
* between i_size and the start of the write.
|
|
*/
|
|
static int ocfs2_extend_file(struct inode *inode,
|
|
struct buffer_head *di_bh,
|
|
u64 new_i_size,
|
|
size_t tail_to_skip)
|
|
{
|
|
int ret = 0;
|
|
u32 clusters_to_add = 0;
|
|
|
|
BUG_ON(!tail_to_skip && !di_bh);
|
|
|
|
/* setattr sometimes calls us like this. */
|
|
if (new_i_size == 0)
|
|
goto out;
|
|
|
|
if (i_size_read(inode) == new_i_size)
|
|
goto out;
|
|
BUG_ON(new_i_size < i_size_read(inode));
|
|
|
|
if (ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb))) {
|
|
BUG_ON(tail_to_skip != 0);
|
|
goto out_update_size;
|
|
}
|
|
|
|
clusters_to_add = ocfs2_clusters_for_bytes(inode->i_sb, new_i_size) -
|
|
OCFS2_I(inode)->ip_clusters;
|
|
|
|
/*
|
|
* protect the pages that ocfs2_zero_extend is going to be
|
|
* pulling into the page cache.. we do this before the
|
|
* metadata extend so that we don't get into the situation
|
|
* where we've extended the metadata but can't get the data
|
|
* lock to zero.
|
|
*/
|
|
ret = ocfs2_data_lock(inode, 1);
|
|
if (ret < 0) {
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
if (clusters_to_add) {
|
|
ret = ocfs2_extend_allocation(inode,
|
|
OCFS2_I(inode)->ip_clusters,
|
|
clusters_to_add, 0);
|
|
if (ret < 0) {
|
|
mlog_errno(ret);
|
|
goto out_unlock;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Call this even if we don't add any clusters to the tree. We
|
|
* still need to zero the area between the old i_size and the
|
|
* new i_size.
|
|
*/
|
|
ret = ocfs2_zero_extend(inode, (u64)new_i_size - tail_to_skip);
|
|
if (ret < 0) {
|
|
mlog_errno(ret);
|
|
goto out_unlock;
|
|
}
|
|
|
|
out_update_size:
|
|
if (!tail_to_skip) {
|
|
/* We're being called from ocfs2_setattr() which wants
|
|
* us to update i_size */
|
|
ret = ocfs2_simple_size_update(inode, di_bh, new_i_size);
|
|
if (ret < 0)
|
|
mlog_errno(ret);
|
|
}
|
|
|
|
out_unlock:
|
|
if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
|
|
ocfs2_data_unlock(inode, 1);
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
|
|
{
|
|
int status = 0, size_change;
|
|
struct inode *inode = dentry->d_inode;
|
|
struct super_block *sb = inode->i_sb;
|
|
struct ocfs2_super *osb = OCFS2_SB(sb);
|
|
struct buffer_head *bh = NULL;
|
|
handle_t *handle = NULL;
|
|
|
|
mlog_entry("(0x%p, '%.*s')\n", dentry,
|
|
dentry->d_name.len, dentry->d_name.name);
|
|
|
|
if (attr->ia_valid & ATTR_MODE)
|
|
mlog(0, "mode change: %d\n", attr->ia_mode);
|
|
if (attr->ia_valid & ATTR_UID)
|
|
mlog(0, "uid change: %d\n", attr->ia_uid);
|
|
if (attr->ia_valid & ATTR_GID)
|
|
mlog(0, "gid change: %d\n", attr->ia_gid);
|
|
if (attr->ia_valid & ATTR_SIZE)
|
|
mlog(0, "size change...\n");
|
|
if (attr->ia_valid & (ATTR_ATIME | ATTR_MTIME | ATTR_CTIME))
|
|
mlog(0, "time change...\n");
|
|
|
|
#define OCFS2_VALID_ATTRS (ATTR_ATIME | ATTR_MTIME | ATTR_CTIME | ATTR_SIZE \
|
|
| ATTR_GID | ATTR_UID | ATTR_MODE)
|
|
if (!(attr->ia_valid & OCFS2_VALID_ATTRS)) {
|
|
mlog(0, "can't handle attrs: 0x%x\n", attr->ia_valid);
|
|
return 0;
|
|
}
|
|
|
|
status = inode_change_ok(inode, attr);
|
|
if (status)
|
|
return status;
|
|
|
|
size_change = S_ISREG(inode->i_mode) && attr->ia_valid & ATTR_SIZE;
|
|
if (size_change) {
|
|
status = ocfs2_rw_lock(inode, 1);
|
|
if (status < 0) {
|
|
mlog_errno(status);
|
|
goto bail;
|
|
}
|
|
}
|
|
|
|
status = ocfs2_meta_lock(inode, &bh, 1);
|
|
if (status < 0) {
|
|
if (status != -ENOENT)
|
|
mlog_errno(status);
|
|
goto bail_unlock_rw;
|
|
}
|
|
|
|
if (size_change && attr->ia_size != i_size_read(inode)) {
|
|
if (attr->ia_size > sb->s_maxbytes) {
|
|
status = -EFBIG;
|
|
goto bail_unlock;
|
|
}
|
|
|
|
if (i_size_read(inode) > attr->ia_size)
|
|
status = ocfs2_truncate_file(inode, bh, attr->ia_size);
|
|
else
|
|
status = ocfs2_extend_file(inode, bh, attr->ia_size, 0);
|
|
if (status < 0) {
|
|
if (status != -ENOSPC)
|
|
mlog_errno(status);
|
|
status = -ENOSPC;
|
|
goto bail_unlock;
|
|
}
|
|
}
|
|
|
|
handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
|
|
if (IS_ERR(handle)) {
|
|
status = PTR_ERR(handle);
|
|
mlog_errno(status);
|
|
goto bail_unlock;
|
|
}
|
|
|
|
/*
|
|
* This will intentionally not wind up calling vmtruncate(),
|
|
* since all the work for a size change has been done above.
|
|
* Otherwise, we could get into problems with truncate as
|
|
* ip_alloc_sem is used there to protect against i_size
|
|
* changes.
|
|
*/
|
|
status = inode_setattr(inode, attr);
|
|
if (status < 0) {
|
|
mlog_errno(status);
|
|
goto bail_commit;
|
|
}
|
|
|
|
status = ocfs2_mark_inode_dirty(handle, inode, bh);
|
|
if (status < 0)
|
|
mlog_errno(status);
|
|
|
|
bail_commit:
|
|
ocfs2_commit_trans(osb, handle);
|
|
bail_unlock:
|
|
ocfs2_meta_unlock(inode, 1);
|
|
bail_unlock_rw:
|
|
if (size_change)
|
|
ocfs2_rw_unlock(inode, 1);
|
|
bail:
|
|
if (bh)
|
|
brelse(bh);
|
|
|
|
mlog_exit(status);
|
|
return status;
|
|
}
|
|
|
|
int ocfs2_getattr(struct vfsmount *mnt,
|
|
struct dentry *dentry,
|
|
struct kstat *stat)
|
|
{
|
|
struct inode *inode = dentry->d_inode;
|
|
struct super_block *sb = dentry->d_inode->i_sb;
|
|
struct ocfs2_super *osb = sb->s_fs_info;
|
|
int err;
|
|
|
|
mlog_entry_void();
|
|
|
|
err = ocfs2_inode_revalidate(dentry);
|
|
if (err) {
|
|
if (err != -ENOENT)
|
|
mlog_errno(err);
|
|
goto bail;
|
|
}
|
|
|
|
generic_fillattr(inode, stat);
|
|
|
|
/* We set the blksize from the cluster size for performance */
|
|
stat->blksize = osb->s_clustersize;
|
|
|
|
bail:
|
|
mlog_exit(err);
|
|
|
|
return err;
|
|
}
|
|
|
|
int ocfs2_permission(struct inode *inode, int mask, struct nameidata *nd)
|
|
{
|
|
int ret;
|
|
|
|
mlog_entry_void();
|
|
|
|
ret = ocfs2_meta_lock(inode, NULL, 0);
|
|
if (ret) {
|
|
if (ret != -ENOENT)
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = generic_permission(inode, mask, NULL);
|
|
|
|
ocfs2_meta_unlock(inode, 0);
|
|
out:
|
|
mlog_exit(ret);
|
|
return ret;
|
|
}
|
|
|
|
static int __ocfs2_write_remove_suid(struct inode *inode,
|
|
struct buffer_head *bh)
|
|
{
|
|
int ret;
|
|
handle_t *handle;
|
|
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
|
|
struct ocfs2_dinode *di;
|
|
|
|
mlog_entry("(Inode %llu, mode 0%o)\n",
|
|
(unsigned long long)OCFS2_I(inode)->ip_blkno, inode->i_mode);
|
|
|
|
handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
|
|
if (handle == NULL) {
|
|
ret = -ENOMEM;
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = ocfs2_journal_access(handle, inode, bh,
|
|
OCFS2_JOURNAL_ACCESS_WRITE);
|
|
if (ret < 0) {
|
|
mlog_errno(ret);
|
|
goto out_trans;
|
|
}
|
|
|
|
inode->i_mode &= ~S_ISUID;
|
|
if ((inode->i_mode & S_ISGID) && (inode->i_mode & S_IXGRP))
|
|
inode->i_mode &= ~S_ISGID;
|
|
|
|
di = (struct ocfs2_dinode *) bh->b_data;
|
|
di->i_mode = cpu_to_le16(inode->i_mode);
|
|
|
|
ret = ocfs2_journal_dirty(handle, bh);
|
|
if (ret < 0)
|
|
mlog_errno(ret);
|
|
|
|
out_trans:
|
|
ocfs2_commit_trans(osb, handle);
|
|
out:
|
|
mlog_exit(ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Will look for holes and unwritten extents in the range starting at
|
|
* pos for count bytes (inclusive).
|
|
*/
|
|
static int ocfs2_check_range_for_holes(struct inode *inode, loff_t pos,
|
|
size_t count)
|
|
{
|
|
int ret = 0;
|
|
unsigned int extent_flags;
|
|
u32 cpos, clusters, extent_len, phys_cpos;
|
|
struct super_block *sb = inode->i_sb;
|
|
|
|
cpos = pos >> OCFS2_SB(sb)->s_clustersize_bits;
|
|
clusters = ocfs2_clusters_for_bytes(sb, pos + count) - cpos;
|
|
|
|
while (clusters) {
|
|
ret = ocfs2_get_clusters(inode, cpos, &phys_cpos, &extent_len,
|
|
&extent_flags);
|
|
if (ret < 0) {
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
if (phys_cpos == 0 || (extent_flags & OCFS2_EXT_UNWRITTEN)) {
|
|
ret = 1;
|
|
break;
|
|
}
|
|
|
|
if (extent_len > clusters)
|
|
extent_len = clusters;
|
|
|
|
clusters -= extent_len;
|
|
cpos += extent_len;
|
|
}
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int ocfs2_write_remove_suid(struct inode *inode)
|
|
{
|
|
int ret;
|
|
struct buffer_head *bh = NULL;
|
|
struct ocfs2_inode_info *oi = OCFS2_I(inode);
|
|
|
|
ret = ocfs2_read_block(OCFS2_SB(inode->i_sb),
|
|
oi->ip_blkno, &bh, OCFS2_BH_CACHED, inode);
|
|
if (ret < 0) {
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = __ocfs2_write_remove_suid(inode, bh);
|
|
out:
|
|
brelse(bh);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Allocate enough extents to cover the region starting at byte offset
|
|
* start for len bytes. Existing extents are skipped, any extents
|
|
* added are marked as "unwritten".
|
|
*/
|
|
static int ocfs2_allocate_unwritten_extents(struct inode *inode,
|
|
u64 start, u64 len)
|
|
{
|
|
int ret;
|
|
u32 cpos, phys_cpos, clusters, alloc_size;
|
|
|
|
/*
|
|
* We consider both start and len to be inclusive.
|
|
*/
|
|
cpos = start >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
|
|
clusters = ocfs2_clusters_for_bytes(inode->i_sb, start + len);
|
|
clusters -= cpos;
|
|
|
|
while (clusters) {
|
|
ret = ocfs2_get_clusters(inode, cpos, &phys_cpos,
|
|
&alloc_size, NULL);
|
|
if (ret) {
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Hole or existing extent len can be arbitrary, so
|
|
* cap it to our own allocation request.
|
|
*/
|
|
if (alloc_size > clusters)
|
|
alloc_size = clusters;
|
|
|
|
if (phys_cpos) {
|
|
/*
|
|
* We already have an allocation at this
|
|
* region so we can safely skip it.
|
|
*/
|
|
goto next;
|
|
}
|
|
|
|
ret = __ocfs2_extend_allocation(inode, cpos, alloc_size, 1);
|
|
if (ret) {
|
|
if (ret != -ENOSPC)
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
next:
|
|
cpos += alloc_size;
|
|
clusters -= alloc_size;
|
|
}
|
|
|
|
ret = 0;
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int __ocfs2_remove_inode_range(struct inode *inode,
|
|
struct buffer_head *di_bh,
|
|
u32 cpos, u32 phys_cpos, u32 len,
|
|
struct ocfs2_cached_dealloc_ctxt *dealloc)
|
|
{
|
|
int ret;
|
|
u64 phys_blkno = ocfs2_clusters_to_blocks(inode->i_sb, phys_cpos);
|
|
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
|
|
struct inode *tl_inode = osb->osb_tl_inode;
|
|
handle_t *handle;
|
|
struct ocfs2_alloc_context *meta_ac = NULL;
|
|
struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data;
|
|
|
|
ret = ocfs2_lock_allocators(inode, di, 0, 1, NULL, &meta_ac);
|
|
if (ret) {
|
|
mlog_errno(ret);
|
|
return ret;
|
|
}
|
|
|
|
mutex_lock(&tl_inode->i_mutex);
|
|
|
|
if (ocfs2_truncate_log_needs_flush(osb)) {
|
|
ret = __ocfs2_flush_truncate_log(osb);
|
|
if (ret < 0) {
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
handle = ocfs2_start_trans(osb, OCFS2_REMOVE_EXTENT_CREDITS);
|
|
if (handle == NULL) {
|
|
ret = -ENOMEM;
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = ocfs2_journal_access(handle, inode, di_bh,
|
|
OCFS2_JOURNAL_ACCESS_WRITE);
|
|
if (ret) {
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = ocfs2_remove_extent(inode, di_bh, cpos, len, handle, meta_ac,
|
|
dealloc);
|
|
if (ret) {
|
|
mlog_errno(ret);
|
|
goto out_commit;
|
|
}
|
|
|
|
OCFS2_I(inode)->ip_clusters -= len;
|
|
di->i_clusters = cpu_to_le32(OCFS2_I(inode)->ip_clusters);
|
|
|
|
ret = ocfs2_journal_dirty(handle, di_bh);
|
|
if (ret) {
|
|
mlog_errno(ret);
|
|
goto out_commit;
|
|
}
|
|
|
|
ret = ocfs2_truncate_log_append(osb, handle, phys_blkno, len);
|
|
if (ret)
|
|
mlog_errno(ret);
|
|
|
|
out_commit:
|
|
ocfs2_commit_trans(osb, handle);
|
|
out:
|
|
mutex_unlock(&tl_inode->i_mutex);
|
|
|
|
if (meta_ac)
|
|
ocfs2_free_alloc_context(meta_ac);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Truncate a byte range, avoiding pages within partial clusters. This
|
|
* preserves those pages for the zeroing code to write to.
|
|
*/
|
|
static void ocfs2_truncate_cluster_pages(struct inode *inode, u64 byte_start,
|
|
u64 byte_len)
|
|
{
|
|
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
|
|
loff_t start, end;
|
|
struct address_space *mapping = inode->i_mapping;
|
|
|
|
start = (loff_t)ocfs2_align_bytes_to_clusters(inode->i_sb, byte_start);
|
|
end = byte_start + byte_len;
|
|
end = end & ~(osb->s_clustersize - 1);
|
|
|
|
if (start < end) {
|
|
unmap_mapping_range(mapping, start, end - start, 0);
|
|
truncate_inode_pages_range(mapping, start, end - 1);
|
|
}
|
|
}
|
|
|
|
static int ocfs2_zero_partial_clusters(struct inode *inode,
|
|
u64 start, u64 len)
|
|
{
|
|
int ret = 0;
|
|
u64 tmpend, end = start + len;
|
|
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
|
|
unsigned int csize = osb->s_clustersize;
|
|
handle_t *handle;
|
|
|
|
/*
|
|
* The "start" and "end" values are NOT necessarily part of
|
|
* the range whose allocation is being deleted. Rather, this
|
|
* is what the user passed in with the request. We must zero
|
|
* partial clusters here. There's no need to worry about
|
|
* physical allocation - the zeroing code knows to skip holes.
|
|
*/
|
|
mlog(0, "byte start: %llu, end: %llu\n",
|
|
(unsigned long long)start, (unsigned long long)end);
|
|
|
|
/*
|
|
* If both edges are on a cluster boundary then there's no
|
|
* zeroing required as the region is part of the allocation to
|
|
* be truncated.
|
|
*/
|
|
if ((start & (csize - 1)) == 0 && (end & (csize - 1)) == 0)
|
|
goto out;
|
|
|
|
handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
|
|
if (handle == NULL) {
|
|
ret = -ENOMEM;
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* We want to get the byte offset of the end of the 1st cluster.
|
|
*/
|
|
tmpend = (u64)osb->s_clustersize + (start & ~(osb->s_clustersize - 1));
|
|
if (tmpend > end)
|
|
tmpend = end;
|
|
|
|
mlog(0, "1st range: start: %llu, tmpend: %llu\n",
|
|
(unsigned long long)start, (unsigned long long)tmpend);
|
|
|
|
ret = ocfs2_zero_range_for_truncate(inode, handle, start, tmpend);
|
|
if (ret)
|
|
mlog_errno(ret);
|
|
|
|
if (tmpend < end) {
|
|
/*
|
|
* This may make start and end equal, but the zeroing
|
|
* code will skip any work in that case so there's no
|
|
* need to catch it up here.
|
|
*/
|
|
start = end & ~(osb->s_clustersize - 1);
|
|
|
|
mlog(0, "2nd range: start: %llu, end: %llu\n",
|
|
(unsigned long long)start, (unsigned long long)end);
|
|
|
|
ret = ocfs2_zero_range_for_truncate(inode, handle, start, end);
|
|
if (ret)
|
|
mlog_errno(ret);
|
|
}
|
|
|
|
ocfs2_commit_trans(osb, handle);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int ocfs2_remove_inode_range(struct inode *inode,
|
|
struct buffer_head *di_bh, u64 byte_start,
|
|
u64 byte_len)
|
|
{
|
|
int ret = 0;
|
|
u32 trunc_start, trunc_len, cpos, phys_cpos, alloc_size;
|
|
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
|
|
struct ocfs2_cached_dealloc_ctxt dealloc;
|
|
|
|
ocfs2_init_dealloc_ctxt(&dealloc);
|
|
|
|
if (byte_len == 0)
|
|
return 0;
|
|
|
|
trunc_start = ocfs2_clusters_for_bytes(osb->sb, byte_start);
|
|
trunc_len = (byte_start + byte_len) >> osb->s_clustersize_bits;
|
|
if (trunc_len >= trunc_start)
|
|
trunc_len -= trunc_start;
|
|
else
|
|
trunc_len = 0;
|
|
|
|
mlog(0, "Inode: %llu, start: %llu, len: %llu, cstart: %u, clen: %u\n",
|
|
(unsigned long long)OCFS2_I(inode)->ip_blkno,
|
|
(unsigned long long)byte_start,
|
|
(unsigned long long)byte_len, trunc_start, trunc_len);
|
|
|
|
ret = ocfs2_zero_partial_clusters(inode, byte_start, byte_len);
|
|
if (ret) {
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
cpos = trunc_start;
|
|
while (trunc_len) {
|
|
ret = ocfs2_get_clusters(inode, cpos, &phys_cpos,
|
|
&alloc_size, NULL);
|
|
if (ret) {
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
if (alloc_size > trunc_len)
|
|
alloc_size = trunc_len;
|
|
|
|
/* Only do work for non-holes */
|
|
if (phys_cpos != 0) {
|
|
ret = __ocfs2_remove_inode_range(inode, di_bh, cpos,
|
|
phys_cpos, alloc_size,
|
|
&dealloc);
|
|
if (ret) {
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
cpos += alloc_size;
|
|
trunc_len -= alloc_size;
|
|
}
|
|
|
|
ocfs2_truncate_cluster_pages(inode, byte_start, byte_len);
|
|
|
|
out:
|
|
ocfs2_schedule_truncate_log_flush(osb, 1);
|
|
ocfs2_run_deallocs(osb, &dealloc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Parts of this function taken from xfs_change_file_space()
|
|
*/
|
|
static int __ocfs2_change_file_space(struct file *file, struct inode *inode,
|
|
loff_t f_pos, unsigned int cmd,
|
|
struct ocfs2_space_resv *sr,
|
|
int change_size)
|
|
{
|
|
int ret;
|
|
s64 llen;
|
|
loff_t size;
|
|
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
|
|
struct buffer_head *di_bh = NULL;
|
|
handle_t *handle;
|
|
unsigned long long max_off = inode->i_sb->s_maxbytes;
|
|
|
|
if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb))
|
|
return -EROFS;
|
|
|
|
mutex_lock(&inode->i_mutex);
|
|
|
|
/*
|
|
* This prevents concurrent writes on other nodes
|
|
*/
|
|
ret = ocfs2_rw_lock(inode, 1);
|
|
if (ret) {
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = ocfs2_meta_lock(inode, &di_bh, 1);
|
|
if (ret) {
|
|
mlog_errno(ret);
|
|
goto out_rw_unlock;
|
|
}
|
|
|
|
if (inode->i_flags & (S_IMMUTABLE|S_APPEND)) {
|
|
ret = -EPERM;
|
|
goto out_meta_unlock;
|
|
}
|
|
|
|
switch (sr->l_whence) {
|
|
case 0: /*SEEK_SET*/
|
|
break;
|
|
case 1: /*SEEK_CUR*/
|
|
sr->l_start += f_pos;
|
|
break;
|
|
case 2: /*SEEK_END*/
|
|
sr->l_start += i_size_read(inode);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
goto out_meta_unlock;
|
|
}
|
|
sr->l_whence = 0;
|
|
|
|
llen = sr->l_len > 0 ? sr->l_len - 1 : sr->l_len;
|
|
|
|
if (sr->l_start < 0
|
|
|| sr->l_start > max_off
|
|
|| (sr->l_start + llen) < 0
|
|
|| (sr->l_start + llen) > max_off) {
|
|
ret = -EINVAL;
|
|
goto out_meta_unlock;
|
|
}
|
|
size = sr->l_start + sr->l_len;
|
|
|
|
if (cmd == OCFS2_IOC_RESVSP || cmd == OCFS2_IOC_RESVSP64) {
|
|
if (sr->l_len <= 0) {
|
|
ret = -EINVAL;
|
|
goto out_meta_unlock;
|
|
}
|
|
}
|
|
|
|
if (file && should_remove_suid(file->f_path.dentry)) {
|
|
ret = __ocfs2_write_remove_suid(inode, di_bh);
|
|
if (ret) {
|
|
mlog_errno(ret);
|
|
goto out_meta_unlock;
|
|
}
|
|
}
|
|
|
|
down_write(&OCFS2_I(inode)->ip_alloc_sem);
|
|
switch (cmd) {
|
|
case OCFS2_IOC_RESVSP:
|
|
case OCFS2_IOC_RESVSP64:
|
|
/*
|
|
* This takes unsigned offsets, but the signed ones we
|
|
* pass have been checked against overflow above.
|
|
*/
|
|
ret = ocfs2_allocate_unwritten_extents(inode, sr->l_start,
|
|
sr->l_len);
|
|
break;
|
|
case OCFS2_IOC_UNRESVSP:
|
|
case OCFS2_IOC_UNRESVSP64:
|
|
ret = ocfs2_remove_inode_range(inode, di_bh, sr->l_start,
|
|
sr->l_len);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
up_write(&OCFS2_I(inode)->ip_alloc_sem);
|
|
if (ret) {
|
|
mlog_errno(ret);
|
|
goto out_meta_unlock;
|
|
}
|
|
|
|
/*
|
|
* We update c/mtime for these changes
|
|
*/
|
|
handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
|
|
if (IS_ERR(handle)) {
|
|
ret = PTR_ERR(handle);
|
|
mlog_errno(ret);
|
|
goto out_meta_unlock;
|
|
}
|
|
|
|
if (change_size && i_size_read(inode) < size)
|
|
i_size_write(inode, size);
|
|
|
|
inode->i_ctime = inode->i_mtime = CURRENT_TIME;
|
|
ret = ocfs2_mark_inode_dirty(handle, inode, di_bh);
|
|
if (ret < 0)
|
|
mlog_errno(ret);
|
|
|
|
ocfs2_commit_trans(osb, handle);
|
|
|
|
out_meta_unlock:
|
|
brelse(di_bh);
|
|
ocfs2_meta_unlock(inode, 1);
|
|
out_rw_unlock:
|
|
ocfs2_rw_unlock(inode, 1);
|
|
|
|
mutex_unlock(&inode->i_mutex);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
int ocfs2_change_file_space(struct file *file, unsigned int cmd,
|
|
struct ocfs2_space_resv *sr)
|
|
{
|
|
struct inode *inode = file->f_path.dentry->d_inode;
|
|
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);;
|
|
|
|
if ((cmd == OCFS2_IOC_RESVSP || cmd == OCFS2_IOC_RESVSP64) &&
|
|
!ocfs2_writes_unwritten_extents(osb))
|
|
return -ENOTTY;
|
|
else if ((cmd == OCFS2_IOC_UNRESVSP || cmd == OCFS2_IOC_UNRESVSP64) &&
|
|
!ocfs2_sparse_alloc(osb))
|
|
return -ENOTTY;
|
|
|
|
if (!S_ISREG(inode->i_mode))
|
|
return -EINVAL;
|
|
|
|
if (!(file->f_mode & FMODE_WRITE))
|
|
return -EBADF;
|
|
|
|
return __ocfs2_change_file_space(file, inode, file->f_pos, cmd, sr, 0);
|
|
}
|
|
|
|
static long ocfs2_fallocate(struct inode *inode, int mode, loff_t offset,
|
|
loff_t len)
|
|
{
|
|
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
|
|
struct ocfs2_space_resv sr;
|
|
int change_size = 1;
|
|
|
|
if (!ocfs2_writes_unwritten_extents(osb))
|
|
return -EOPNOTSUPP;
|
|
|
|
if (S_ISDIR(inode->i_mode))
|
|
return -ENODEV;
|
|
|
|
if (mode & FALLOC_FL_KEEP_SIZE)
|
|
change_size = 0;
|
|
|
|
sr.l_whence = 0;
|
|
sr.l_start = (s64)offset;
|
|
sr.l_len = (s64)len;
|
|
|
|
return __ocfs2_change_file_space(NULL, inode, offset,
|
|
OCFS2_IOC_RESVSP64, &sr, change_size);
|
|
}
|
|
|
|
static int ocfs2_prepare_inode_for_write(struct dentry *dentry,
|
|
loff_t *ppos,
|
|
size_t count,
|
|
int appending,
|
|
int *direct_io)
|
|
{
|
|
int ret = 0, meta_level = appending;
|
|
struct inode *inode = dentry->d_inode;
|
|
u32 clusters;
|
|
loff_t newsize, saved_pos;
|
|
|
|
/*
|
|
* We sample i_size under a read level meta lock to see if our write
|
|
* is extending the file, if it is we back off and get a write level
|
|
* meta lock.
|
|
*/
|
|
for(;;) {
|
|
ret = ocfs2_meta_lock(inode, NULL, meta_level);
|
|
if (ret < 0) {
|
|
meta_level = -1;
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
/* Clear suid / sgid if necessary. We do this here
|
|
* instead of later in the write path because
|
|
* remove_suid() calls ->setattr without any hint that
|
|
* we may have already done our cluster locking. Since
|
|
* ocfs2_setattr() *must* take cluster locks to
|
|
* proceeed, this will lead us to recursively lock the
|
|
* inode. There's also the dinode i_size state which
|
|
* can be lost via setattr during extending writes (we
|
|
* set inode->i_size at the end of a write. */
|
|
if (should_remove_suid(dentry)) {
|
|
if (meta_level == 0) {
|
|
ocfs2_meta_unlock(inode, meta_level);
|
|
meta_level = 1;
|
|
continue;
|
|
}
|
|
|
|
ret = ocfs2_write_remove_suid(inode);
|
|
if (ret < 0) {
|
|
mlog_errno(ret);
|
|
goto out_unlock;
|
|
}
|
|
}
|
|
|
|
/* work on a copy of ppos until we're sure that we won't have
|
|
* to recalculate it due to relocking. */
|
|
if (appending) {
|
|
saved_pos = i_size_read(inode);
|
|
mlog(0, "O_APPEND: inode->i_size=%llu\n", saved_pos);
|
|
} else {
|
|
saved_pos = *ppos;
|
|
}
|
|
|
|
if (ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb))) {
|
|
loff_t end = saved_pos + count;
|
|
|
|
/*
|
|
* Skip the O_DIRECT checks if we don't need
|
|
* them.
|
|
*/
|
|
if (!direct_io || !(*direct_io))
|
|
break;
|
|
|
|
/*
|
|
* Allowing concurrent direct writes means
|
|
* i_size changes wouldn't be synchronized, so
|
|
* one node could wind up truncating another
|
|
* nodes writes.
|
|
*/
|
|
if (end > i_size_read(inode)) {
|
|
*direct_io = 0;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* We don't fill holes during direct io, so
|
|
* check for them here. If any are found, the
|
|
* caller will have to retake some cluster
|
|
* locks and initiate the io as buffered.
|
|
*/
|
|
ret = ocfs2_check_range_for_holes(inode, saved_pos,
|
|
count);
|
|
if (ret == 1) {
|
|
*direct_io = 0;
|
|
ret = 0;
|
|
} else if (ret < 0)
|
|
mlog_errno(ret);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* The rest of this loop is concerned with legacy file
|
|
* systems which don't support sparse files.
|
|
*/
|
|
|
|
newsize = count + saved_pos;
|
|
|
|
mlog(0, "pos=%lld newsize=%lld cursize=%lld\n",
|
|
(long long) saved_pos, (long long) newsize,
|
|
(long long) i_size_read(inode));
|
|
|
|
/* No need for a higher level metadata lock if we're
|
|
* never going past i_size. */
|
|
if (newsize <= i_size_read(inode))
|
|
break;
|
|
|
|
if (meta_level == 0) {
|
|
ocfs2_meta_unlock(inode, meta_level);
|
|
meta_level = 1;
|
|
continue;
|
|
}
|
|
|
|
spin_lock(&OCFS2_I(inode)->ip_lock);
|
|
clusters = ocfs2_clusters_for_bytes(inode->i_sb, newsize) -
|
|
OCFS2_I(inode)->ip_clusters;
|
|
spin_unlock(&OCFS2_I(inode)->ip_lock);
|
|
|
|
mlog(0, "Writing at EOF, may need more allocation: "
|
|
"i_size = %lld, newsize = %lld, need %u clusters\n",
|
|
(long long) i_size_read(inode), (long long) newsize,
|
|
clusters);
|
|
|
|
/* We only want to continue the rest of this loop if
|
|
* our extend will actually require more
|
|
* allocation. */
|
|
if (!clusters)
|
|
break;
|
|
|
|
ret = ocfs2_extend_file(inode, NULL, newsize, count);
|
|
if (ret < 0) {
|
|
if (ret != -ENOSPC)
|
|
mlog_errno(ret);
|
|
goto out_unlock;
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (appending)
|
|
*ppos = saved_pos;
|
|
|
|
out_unlock:
|
|
ocfs2_meta_unlock(inode, meta_level);
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static inline void
|
|
ocfs2_set_next_iovec(const struct iovec **iovp, size_t *basep, size_t bytes)
|
|
{
|
|
const struct iovec *iov = *iovp;
|
|
size_t base = *basep;
|
|
|
|
do {
|
|
int copy = min(bytes, iov->iov_len - base);
|
|
|
|
bytes -= copy;
|
|
base += copy;
|
|
if (iov->iov_len == base) {
|
|
iov++;
|
|
base = 0;
|
|
}
|
|
} while (bytes);
|
|
*iovp = iov;
|
|
*basep = base;
|
|
}
|
|
|
|
static struct page * ocfs2_get_write_source(char **ret_src_buf,
|
|
const struct iovec *cur_iov,
|
|
size_t iov_offset)
|
|
{
|
|
int ret;
|
|
char *buf = cur_iov->iov_base + iov_offset;
|
|
struct page *src_page = NULL;
|
|
unsigned long off;
|
|
|
|
off = (unsigned long)(buf) & ~PAGE_CACHE_MASK;
|
|
|
|
if (!segment_eq(get_fs(), KERNEL_DS)) {
|
|
/*
|
|
* Pull in the user page. We want to do this outside
|
|
* of the meta data locks in order to preserve locking
|
|
* order in case of page fault.
|
|
*/
|
|
ret = get_user_pages(current, current->mm,
|
|
(unsigned long)buf & PAGE_CACHE_MASK, 1,
|
|
0, 0, &src_page, NULL);
|
|
if (ret == 1)
|
|
*ret_src_buf = kmap(src_page) + off;
|
|
else
|
|
src_page = ERR_PTR(-EFAULT);
|
|
} else {
|
|
*ret_src_buf = buf;
|
|
}
|
|
|
|
return src_page;
|
|
}
|
|
|
|
static void ocfs2_put_write_source(struct page *page)
|
|
{
|
|
if (page) {
|
|
kunmap(page);
|
|
page_cache_release(page);
|
|
}
|
|
}
|
|
|
|
static ssize_t ocfs2_file_buffered_write(struct file *file, loff_t *ppos,
|
|
const struct iovec *iov,
|
|
unsigned long nr_segs,
|
|
size_t count,
|
|
ssize_t o_direct_written)
|
|
{
|
|
int ret = 0;
|
|
ssize_t copied, total = 0;
|
|
size_t iov_offset = 0, bytes;
|
|
loff_t pos;
|
|
const struct iovec *cur_iov = iov;
|
|
struct page *user_page, *page;
|
|
char * uninitialized_var(buf);
|
|
char *dst;
|
|
void *fsdata;
|
|
|
|
/*
|
|
* handle partial DIO write. Adjust cur_iov if needed.
|
|
*/
|
|
ocfs2_set_next_iovec(&cur_iov, &iov_offset, o_direct_written);
|
|
|
|
do {
|
|
pos = *ppos;
|
|
|
|
user_page = ocfs2_get_write_source(&buf, cur_iov, iov_offset);
|
|
if (IS_ERR(user_page)) {
|
|
ret = PTR_ERR(user_page);
|
|
goto out;
|
|
}
|
|
|
|
/* Stay within our page boundaries */
|
|
bytes = min((PAGE_CACHE_SIZE - ((unsigned long)pos & ~PAGE_CACHE_MASK)),
|
|
(PAGE_CACHE_SIZE - ((unsigned long)buf & ~PAGE_CACHE_MASK)));
|
|
/* Stay within the vector boundary */
|
|
bytes = min_t(size_t, bytes, cur_iov->iov_len - iov_offset);
|
|
/* Stay within count */
|
|
bytes = min(bytes, count);
|
|
|
|
page = NULL;
|
|
ret = ocfs2_write_begin(file, file->f_mapping, pos, bytes, 0,
|
|
&page, &fsdata);
|
|
if (ret) {
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
dst = kmap_atomic(page, KM_USER0);
|
|
memcpy(dst + (pos & (loff_t)(PAGE_CACHE_SIZE - 1)), buf, bytes);
|
|
kunmap_atomic(dst, KM_USER0);
|
|
flush_dcache_page(page);
|
|
ocfs2_put_write_source(user_page);
|
|
|
|
copied = ocfs2_write_end(file, file->f_mapping, pos, bytes,
|
|
bytes, page, fsdata);
|
|
if (copied < 0) {
|
|
mlog_errno(copied);
|
|
ret = copied;
|
|
goto out;
|
|
}
|
|
|
|
total += copied;
|
|
*ppos = pos + copied;
|
|
count -= copied;
|
|
|
|
ocfs2_set_next_iovec(&cur_iov, &iov_offset, copied);
|
|
} while(count);
|
|
|
|
out:
|
|
return total ? total : ret;
|
|
}
|
|
|
|
static ssize_t ocfs2_file_aio_write(struct kiocb *iocb,
|
|
const struct iovec *iov,
|
|
unsigned long nr_segs,
|
|
loff_t pos)
|
|
{
|
|
int ret, direct_io, appending, rw_level, have_alloc_sem = 0;
|
|
int can_do_direct, sync = 0;
|
|
ssize_t written = 0;
|
|
size_t ocount; /* original count */
|
|
size_t count; /* after file limit checks */
|
|
loff_t *ppos = &iocb->ki_pos;
|
|
struct file *file = iocb->ki_filp;
|
|
struct inode *inode = file->f_path.dentry->d_inode;
|
|
|
|
mlog_entry("(0x%p, %u, '%.*s')\n", file,
|
|
(unsigned int)nr_segs,
|
|
file->f_path.dentry->d_name.len,
|
|
file->f_path.dentry->d_name.name);
|
|
|
|
if (iocb->ki_left == 0)
|
|
return 0;
|
|
|
|
ret = generic_segment_checks(iov, &nr_segs, &ocount, VERIFY_READ);
|
|
if (ret)
|
|
return ret;
|
|
|
|
count = ocount;
|
|
|
|
vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE);
|
|
|
|
appending = file->f_flags & O_APPEND ? 1 : 0;
|
|
direct_io = file->f_flags & O_DIRECT ? 1 : 0;
|
|
|
|
mutex_lock(&inode->i_mutex);
|
|
|
|
relock:
|
|
/* to match setattr's i_mutex -> i_alloc_sem -> rw_lock ordering */
|
|
if (direct_io) {
|
|
down_read(&inode->i_alloc_sem);
|
|
have_alloc_sem = 1;
|
|
}
|
|
|
|
/* concurrent O_DIRECT writes are allowed */
|
|
rw_level = !direct_io;
|
|
ret = ocfs2_rw_lock(inode, rw_level);
|
|
if (ret < 0) {
|
|
mlog_errno(ret);
|
|
goto out_sems;
|
|
}
|
|
|
|
can_do_direct = direct_io;
|
|
ret = ocfs2_prepare_inode_for_write(file->f_path.dentry, ppos,
|
|
iocb->ki_left, appending,
|
|
&can_do_direct);
|
|
if (ret < 0) {
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* We can't complete the direct I/O as requested, fall back to
|
|
* buffered I/O.
|
|
*/
|
|
if (direct_io && !can_do_direct) {
|
|
ocfs2_rw_unlock(inode, rw_level);
|
|
up_read(&inode->i_alloc_sem);
|
|
|
|
have_alloc_sem = 0;
|
|
rw_level = -1;
|
|
|
|
direct_io = 0;
|
|
sync = 1;
|
|
goto relock;
|
|
}
|
|
|
|
if (!sync && ((file->f_flags & O_SYNC) || IS_SYNC(inode)))
|
|
sync = 1;
|
|
|
|
/*
|
|
* XXX: Is it ok to execute these checks a second time?
|
|
*/
|
|
ret = generic_write_checks(file, ppos, &count, S_ISBLK(inode->i_mode));
|
|
if (ret)
|
|
goto out;
|
|
|
|
/*
|
|
* Set pos so that sync_page_range_nolock() below understands
|
|
* where to start from. We might've moved it around via the
|
|
* calls above. The range we want to actually sync starts from
|
|
* *ppos here.
|
|
*
|
|
*/
|
|
pos = *ppos;
|
|
|
|
/* communicate with ocfs2_dio_end_io */
|
|
ocfs2_iocb_set_rw_locked(iocb, rw_level);
|
|
|
|
if (direct_io) {
|
|
written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos,
|
|
ppos, count, ocount);
|
|
if (written < 0) {
|
|
ret = written;
|
|
goto out_dio;
|
|
}
|
|
} else {
|
|
written = ocfs2_file_buffered_write(file, ppos, iov, nr_segs,
|
|
count, written);
|
|
if (written < 0) {
|
|
ret = written;
|
|
if (ret != -EFAULT || ret != -ENOSPC)
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
out_dio:
|
|
/* buffered aio wouldn't have proper lock coverage today */
|
|
BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT));
|
|
|
|
/*
|
|
* deep in g_f_a_w_n()->ocfs2_direct_IO we pass in a ocfs2_dio_end_io
|
|
* function pointer which is called when o_direct io completes so that
|
|
* it can unlock our rw lock. (it's the clustered equivalent of
|
|
* i_alloc_sem; protects truncate from racing with pending ios).
|
|
* Unfortunately there are error cases which call end_io and others
|
|
* that don't. so we don't have to unlock the rw_lock if either an
|
|
* async dio is going to do it in the future or an end_io after an
|
|
* error has already done it.
|
|
*/
|
|
if (ret == -EIOCBQUEUED || !ocfs2_iocb_is_rw_locked(iocb)) {
|
|
rw_level = -1;
|
|
have_alloc_sem = 0;
|
|
}
|
|
|
|
out:
|
|
if (rw_level != -1)
|
|
ocfs2_rw_unlock(inode, rw_level);
|
|
|
|
out_sems:
|
|
if (have_alloc_sem)
|
|
up_read(&inode->i_alloc_sem);
|
|
|
|
if (written > 0 && sync) {
|
|
ssize_t err;
|
|
|
|
err = sync_page_range_nolock(inode, file->f_mapping, pos, count);
|
|
if (err < 0)
|
|
written = err;
|
|
}
|
|
|
|
mutex_unlock(&inode->i_mutex);
|
|
|
|
mlog_exit(ret);
|
|
return written ? written : ret;
|
|
}
|
|
|
|
static int ocfs2_splice_write_actor(struct pipe_inode_info *pipe,
|
|
struct pipe_buffer *buf,
|
|
struct splice_desc *sd)
|
|
{
|
|
int ret, count;
|
|
ssize_t copied = 0;
|
|
struct file *file = sd->u.file;
|
|
unsigned int offset;
|
|
struct page *page = NULL;
|
|
void *fsdata;
|
|
char *src, *dst;
|
|
|
|
ret = buf->ops->confirm(pipe, buf);
|
|
if (ret)
|
|
goto out;
|
|
|
|
offset = sd->pos & ~PAGE_CACHE_MASK;
|
|
count = sd->len;
|
|
if (count + offset > PAGE_CACHE_SIZE)
|
|
count = PAGE_CACHE_SIZE - offset;
|
|
|
|
ret = ocfs2_write_begin(file, file->f_mapping, sd->pos, count, 0,
|
|
&page, &fsdata);
|
|
if (ret) {
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
src = buf->ops->map(pipe, buf, 1);
|
|
dst = kmap_atomic(page, KM_USER1);
|
|
memcpy(dst + offset, src + buf->offset, count);
|
|
kunmap_atomic(dst, KM_USER1);
|
|
buf->ops->unmap(pipe, buf, src);
|
|
|
|
copied = ocfs2_write_end(file, file->f_mapping, sd->pos, count, count,
|
|
page, fsdata);
|
|
if (copied < 0) {
|
|
mlog_errno(copied);
|
|
ret = copied;
|
|
goto out;
|
|
}
|
|
out:
|
|
|
|
return copied ? copied : ret;
|
|
}
|
|
|
|
static ssize_t __ocfs2_file_splice_write(struct pipe_inode_info *pipe,
|
|
struct file *out,
|
|
loff_t *ppos,
|
|
size_t len,
|
|
unsigned int flags)
|
|
{
|
|
int ret, err;
|
|
struct address_space *mapping = out->f_mapping;
|
|
struct inode *inode = mapping->host;
|
|
struct splice_desc sd = {
|
|
.total_len = len,
|
|
.flags = flags,
|
|
.pos = *ppos,
|
|
.u.file = out,
|
|
};
|
|
|
|
ret = __splice_from_pipe(pipe, &sd, ocfs2_splice_write_actor);
|
|
if (ret > 0) {
|
|
*ppos += ret;
|
|
|
|
if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
|
|
err = generic_osync_inode(inode, mapping,
|
|
OSYNC_METADATA|OSYNC_DATA);
|
|
if (err)
|
|
ret = err;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe,
|
|
struct file *out,
|
|
loff_t *ppos,
|
|
size_t len,
|
|
unsigned int flags)
|
|
{
|
|
int ret;
|
|
struct inode *inode = out->f_path.dentry->d_inode;
|
|
|
|
mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", out, pipe,
|
|
(unsigned int)len,
|
|
out->f_path.dentry->d_name.len,
|
|
out->f_path.dentry->d_name.name);
|
|
|
|
inode_double_lock(inode, pipe->inode);
|
|
|
|
ret = ocfs2_rw_lock(inode, 1);
|
|
if (ret < 0) {
|
|
mlog_errno(ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, ppos, len, 0,
|
|
NULL);
|
|
if (ret < 0) {
|
|
mlog_errno(ret);
|
|
goto out_unlock;
|
|
}
|
|
|
|
/* ok, we're done with i_size and alloc work */
|
|
ret = __ocfs2_file_splice_write(pipe, out, ppos, len, flags);
|
|
|
|
out_unlock:
|
|
ocfs2_rw_unlock(inode, 1);
|
|
out:
|
|
inode_double_unlock(inode, pipe->inode);
|
|
|
|
mlog_exit(ret);
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t ocfs2_file_splice_read(struct file *in,
|
|
loff_t *ppos,
|
|
struct pipe_inode_info *pipe,
|
|
size_t len,
|
|
unsigned int flags)
|
|
{
|
|
int ret = 0;
|
|
struct inode *inode = in->f_path.dentry->d_inode;
|
|
|
|
mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", in, pipe,
|
|
(unsigned int)len,
|
|
in->f_path.dentry->d_name.len,
|
|
in->f_path.dentry->d_name.name);
|
|
|
|
/*
|
|
* See the comment in ocfs2_file_aio_read()
|
|
*/
|
|
ret = ocfs2_meta_lock(inode, NULL, 0);
|
|
if (ret < 0) {
|
|
mlog_errno(ret);
|
|
goto bail;
|
|
}
|
|
ocfs2_meta_unlock(inode, 0);
|
|
|
|
ret = generic_file_splice_read(in, ppos, pipe, len, flags);
|
|
|
|
bail:
|
|
mlog_exit(ret);
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t ocfs2_file_aio_read(struct kiocb *iocb,
|
|
const struct iovec *iov,
|
|
unsigned long nr_segs,
|
|
loff_t pos)
|
|
{
|
|
int ret = 0, rw_level = -1, have_alloc_sem = 0, lock_level = 0;
|
|
struct file *filp = iocb->ki_filp;
|
|
struct inode *inode = filp->f_path.dentry->d_inode;
|
|
|
|
mlog_entry("(0x%p, %u, '%.*s')\n", filp,
|
|
(unsigned int)nr_segs,
|
|
filp->f_path.dentry->d_name.len,
|
|
filp->f_path.dentry->d_name.name);
|
|
|
|
if (!inode) {
|
|
ret = -EINVAL;
|
|
mlog_errno(ret);
|
|
goto bail;
|
|
}
|
|
|
|
/*
|
|
* buffered reads protect themselves in ->readpage(). O_DIRECT reads
|
|
* need locks to protect pending reads from racing with truncate.
|
|
*/
|
|
if (filp->f_flags & O_DIRECT) {
|
|
down_read(&inode->i_alloc_sem);
|
|
have_alloc_sem = 1;
|
|
|
|
ret = ocfs2_rw_lock(inode, 0);
|
|
if (ret < 0) {
|
|
mlog_errno(ret);
|
|
goto bail;
|
|
}
|
|
rw_level = 0;
|
|
/* communicate with ocfs2_dio_end_io */
|
|
ocfs2_iocb_set_rw_locked(iocb, rw_level);
|
|
}
|
|
|
|
/*
|
|
* We're fine letting folks race truncates and extending
|
|
* writes with read across the cluster, just like they can
|
|
* locally. Hence no rw_lock during read.
|
|
*
|
|
* Take and drop the meta data lock to update inode fields
|
|
* like i_size. This allows the checks down below
|
|
* generic_file_aio_read() a chance of actually working.
|
|
*/
|
|
ret = ocfs2_meta_lock_atime(inode, filp->f_vfsmnt, &lock_level);
|
|
if (ret < 0) {
|
|
mlog_errno(ret);
|
|
goto bail;
|
|
}
|
|
ocfs2_meta_unlock(inode, lock_level);
|
|
|
|
ret = generic_file_aio_read(iocb, iov, nr_segs, iocb->ki_pos);
|
|
if (ret == -EINVAL)
|
|
mlog(ML_ERROR, "generic_file_aio_read returned -EINVAL\n");
|
|
|
|
/* buffered aio wouldn't have proper lock coverage today */
|
|
BUG_ON(ret == -EIOCBQUEUED && !(filp->f_flags & O_DIRECT));
|
|
|
|
/* see ocfs2_file_aio_write */
|
|
if (ret == -EIOCBQUEUED || !ocfs2_iocb_is_rw_locked(iocb)) {
|
|
rw_level = -1;
|
|
have_alloc_sem = 0;
|
|
}
|
|
|
|
bail:
|
|
if (have_alloc_sem)
|
|
up_read(&inode->i_alloc_sem);
|
|
if (rw_level != -1)
|
|
ocfs2_rw_unlock(inode, rw_level);
|
|
mlog_exit(ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
const struct inode_operations ocfs2_file_iops = {
|
|
.setattr = ocfs2_setattr,
|
|
.getattr = ocfs2_getattr,
|
|
.permission = ocfs2_permission,
|
|
.fallocate = ocfs2_fallocate,
|
|
};
|
|
|
|
const struct inode_operations ocfs2_special_file_iops = {
|
|
.setattr = ocfs2_setattr,
|
|
.getattr = ocfs2_getattr,
|
|
.permission = ocfs2_permission,
|
|
};
|
|
|
|
const struct file_operations ocfs2_fops = {
|
|
.read = do_sync_read,
|
|
.write = do_sync_write,
|
|
.mmap = ocfs2_mmap,
|
|
.fsync = ocfs2_sync_file,
|
|
.release = ocfs2_file_release,
|
|
.open = ocfs2_file_open,
|
|
.aio_read = ocfs2_file_aio_read,
|
|
.aio_write = ocfs2_file_aio_write,
|
|
.ioctl = ocfs2_ioctl,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl = ocfs2_compat_ioctl,
|
|
#endif
|
|
.splice_read = ocfs2_file_splice_read,
|
|
.splice_write = ocfs2_file_splice_write,
|
|
};
|
|
|
|
const struct file_operations ocfs2_dops = {
|
|
.read = generic_read_dir,
|
|
.readdir = ocfs2_readdir,
|
|
.fsync = ocfs2_sync_file,
|
|
.ioctl = ocfs2_ioctl,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl = ocfs2_compat_ioctl,
|
|
#endif
|
|
};
|