forked from luck/tmp_suning_uos_patched
5036cc41e0
ADd support for the SPI part of LMS283GF05 LCD. The LCD uses SPI for initialization and powerdown sequences. No further defails are specified in the datasheet about the initialization/powerdown sequence, just the magic numbers that have to be sent over SPI bus. This LCD can be found in the Aeronix Zipit Z2 handheld. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
243 lines
4.9 KiB
C
243 lines
4.9 KiB
C
/*
|
|
* lms283gf05.c -- support for Samsung LMS283GF05 LCD
|
|
*
|
|
* Copyright (c) 2009 Marek Vasut <marek.vasut@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/lcd.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/lms283gf05.h>
|
|
|
|
struct lms283gf05_state {
|
|
struct spi_device *spi;
|
|
struct lcd_device *ld;
|
|
};
|
|
|
|
struct lms283gf05_seq {
|
|
unsigned char reg;
|
|
unsigned short value;
|
|
unsigned char delay;
|
|
};
|
|
|
|
/* Magic sequences supplied by manufacturer, for details refer to datasheet */
|
|
static struct lms283gf05_seq disp_initseq[] = {
|
|
/* REG, VALUE, DELAY */
|
|
{ 0x07, 0x0000, 0 },
|
|
{ 0x13, 0x0000, 10 },
|
|
|
|
{ 0x11, 0x3004, 0 },
|
|
{ 0x14, 0x200F, 0 },
|
|
{ 0x10, 0x1a20, 0 },
|
|
{ 0x13, 0x0040, 50 },
|
|
|
|
{ 0x13, 0x0060, 0 },
|
|
{ 0x13, 0x0070, 200 },
|
|
|
|
{ 0x01, 0x0127, 0 },
|
|
{ 0x02, 0x0700, 0 },
|
|
{ 0x03, 0x1030, 0 },
|
|
{ 0x08, 0x0208, 0 },
|
|
{ 0x0B, 0x0620, 0 },
|
|
{ 0x0C, 0x0110, 0 },
|
|
{ 0x30, 0x0120, 0 },
|
|
{ 0x31, 0x0127, 0 },
|
|
{ 0x32, 0x0000, 0 },
|
|
{ 0x33, 0x0503, 0 },
|
|
{ 0x34, 0x0727, 0 },
|
|
{ 0x35, 0x0124, 0 },
|
|
{ 0x36, 0x0706, 0 },
|
|
{ 0x37, 0x0701, 0 },
|
|
{ 0x38, 0x0F00, 0 },
|
|
{ 0x39, 0x0F00, 0 },
|
|
{ 0x40, 0x0000, 0 },
|
|
{ 0x41, 0x0000, 0 },
|
|
{ 0x42, 0x013f, 0 },
|
|
{ 0x43, 0x0000, 0 },
|
|
{ 0x44, 0x013f, 0 },
|
|
{ 0x45, 0x0000, 0 },
|
|
{ 0x46, 0xef00, 0 },
|
|
{ 0x47, 0x013f, 0 },
|
|
{ 0x48, 0x0000, 0 },
|
|
{ 0x07, 0x0015, 30 },
|
|
|
|
{ 0x07, 0x0017, 0 },
|
|
|
|
{ 0x20, 0x0000, 0 },
|
|
{ 0x21, 0x0000, 0 },
|
|
{ 0x22, 0x0000, 0 }
|
|
};
|
|
|
|
static struct lms283gf05_seq disp_pdwnseq[] = {
|
|
{ 0x07, 0x0016, 30 },
|
|
|
|
{ 0x07, 0x0004, 0 },
|
|
{ 0x10, 0x0220, 20 },
|
|
|
|
{ 0x13, 0x0060, 50 },
|
|
|
|
{ 0x13, 0x0040, 50 },
|
|
|
|
{ 0x13, 0x0000, 0 },
|
|
{ 0x10, 0x0000, 0 }
|
|
};
|
|
|
|
|
|
static void lms283gf05_reset(unsigned long gpio, bool inverted)
|
|
{
|
|
gpio_set_value(gpio, !inverted);
|
|
mdelay(100);
|
|
gpio_set_value(gpio, inverted);
|
|
mdelay(20);
|
|
gpio_set_value(gpio, !inverted);
|
|
mdelay(20);
|
|
}
|
|
|
|
static void lms283gf05_toggle(struct spi_device *spi,
|
|
struct lms283gf05_seq *seq, int sz)
|
|
{
|
|
char buf[3];
|
|
int i;
|
|
|
|
for (i = 0; i < sz; i++) {
|
|
buf[0] = 0x74;
|
|
buf[1] = 0x00;
|
|
buf[2] = seq[i].reg;
|
|
spi_write(spi, buf, 3);
|
|
|
|
buf[0] = 0x76;
|
|
buf[1] = seq[i].value >> 8;
|
|
buf[2] = seq[i].value & 0xff;
|
|
spi_write(spi, buf, 3);
|
|
|
|
mdelay(seq[i].delay);
|
|
}
|
|
}
|
|
|
|
static int lms283gf05_power_set(struct lcd_device *ld, int power)
|
|
{
|
|
struct lms283gf05_state *st = lcd_get_data(ld);
|
|
struct spi_device *spi = st->spi;
|
|
struct lms283gf05_pdata *pdata = spi->dev.platform_data;
|
|
|
|
if (power) {
|
|
if (pdata)
|
|
lms283gf05_reset(pdata->reset_gpio,
|
|
pdata->reset_inverted);
|
|
lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq));
|
|
} else {
|
|
lms283gf05_toggle(spi, disp_pdwnseq, ARRAY_SIZE(disp_pdwnseq));
|
|
if (pdata)
|
|
gpio_set_value(pdata->reset_gpio,
|
|
pdata->reset_inverted);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct lcd_ops lms_ops = {
|
|
.set_power = lms283gf05_power_set,
|
|
.get_power = NULL,
|
|
};
|
|
|
|
static int __devinit lms283gf05_probe(struct spi_device *spi)
|
|
{
|
|
struct lms283gf05_state *st;
|
|
struct lms283gf05_pdata *pdata = spi->dev.platform_data;
|
|
struct lcd_device *ld;
|
|
int ret = 0;
|
|
|
|
if (pdata != NULL) {
|
|
ret = gpio_request(pdata->reset_gpio, "LMS285GF05 RESET");
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = gpio_direction_output(pdata->reset_gpio,
|
|
!pdata->reset_inverted);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
st = kzalloc(sizeof(struct lms283gf05_state), GFP_KERNEL);
|
|
if (st == NULL) {
|
|
dev_err(&spi->dev, "No memory for device state\n");
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
ld = lcd_device_register("lms283gf05", &spi->dev, st, &lms_ops);
|
|
if (IS_ERR(ld)) {
|
|
ret = PTR_ERR(ld);
|
|
goto err2;
|
|
}
|
|
|
|
st->spi = spi;
|
|
st->ld = ld;
|
|
|
|
dev_set_drvdata(&spi->dev, st);
|
|
|
|
/* kick in the LCD */
|
|
if (pdata)
|
|
lms283gf05_reset(pdata->reset_gpio, pdata->reset_inverted);
|
|
lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq));
|
|
|
|
return 0;
|
|
|
|
err2:
|
|
kfree(st);
|
|
err:
|
|
if (pdata != NULL)
|
|
gpio_free(pdata->reset_gpio);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit lms283gf05_remove(struct spi_device *spi)
|
|
{
|
|
struct lms283gf05_state *st = dev_get_drvdata(&spi->dev);
|
|
struct lms283gf05_pdata *pdata = st->spi->dev.platform_data;
|
|
|
|
lcd_device_unregister(st->ld);
|
|
|
|
if (pdata != NULL)
|
|
gpio_free(pdata->reset_gpio);
|
|
|
|
kfree(st);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct spi_driver lms283gf05_driver = {
|
|
.driver = {
|
|
.name = "lms283gf05",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = lms283gf05_probe,
|
|
.remove = __devexit_p(lms283gf05_remove),
|
|
};
|
|
|
|
static __init int lms283gf05_init(void)
|
|
{
|
|
return spi_register_driver(&lms283gf05_driver);
|
|
}
|
|
|
|
static __exit void lms283gf05_exit(void)
|
|
{
|
|
spi_unregister_driver(&lms283gf05_driver);
|
|
}
|
|
|
|
module_init(lms283gf05_init);
|
|
module_exit(lms283gf05_exit);
|
|
|
|
MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
|
|
MODULE_DESCRIPTION("LCD283GF05 LCD");
|
|
MODULE_LICENSE("GPL v2");
|