kernel_optimize_test/include/asm-arm/arch-ks8695/regs-uart.h
Andrew Victor c53c9cf60e [ARM] 4331/3: Support for Micrel/Kendin KS8695 processor
Add core support for the Kendin/Micrel KS8695 processor family.

It is an ARM922-T based SoC with integrated USART, 4-port Ethernet
Switch, WAN Ethernet port, and optional PCI Host bridge, etc.
 http://www.micrel.com/page.do?page=product-info/sys_on_chip.jsp

This patch is based on earlier patches from Lennert Buytenhek, Ben
Dooks and Greg Ungerer posted to the arm-linux-kernel mailing list in
March 2006;  and Micrel's 2.6.9 port.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11 22:02:48 +01:00

93 lines
3.2 KiB
C

/*
* linux/include/asm-arm/arch-ks8695/regs-uart.h
*
* Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
* Copyright (C) 2006 Simtec Electronics
*
* KS8695 - UART register and bit definitions.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef KS8695_UART_H
#define KS8695_UART_H
#define KS8695_UART_OFFSET (0xF0000 + 0xE000)
#define KS8695_UART_VA (KS8695_IO_VA + KS8695_UART_OFFSET)
#define KS8695_UART_PA (KS8695_IO_PA + KS8695_UART_OFFSET)
/*
* UART registers
*/
#define KS8695_URRB (0x00) /* Receive Buffer Register */
#define KS8695_URTH (0x04) /* Transmit Holding Register */
#define KS8695_URFC (0x08) /* FIFO Control Register */
#define KS8695_URLC (0x0C) /* Line Control Register */
#define KS8695_URMC (0x10) /* Modem Control Register */
#define KS8695_URLS (0x14) /* Line Status Register */
#define KS8695_URMS (0x18) /* Modem Status Register */
#define KS8695_URBD (0x1C) /* Baud Rate Divisor Register */
#define KS8695_USR (0x20) /* Status Register */
/* FIFO Control Register */
#define URFC_URFRT (3 << 6) /* Receive FIFO Trigger Level */
#define URFC_URFRT_1 (0 << 6)
#define URFC_URFRT_4 (1 << 6)
#define URFC_URFRT_8 (2 << 6)
#define URFC_URFRT_14 (3 << 6)
#define URFC_URTFR (1 << 2) /* Transmit FIFO Reset */
#define URFC_URRFR (1 << 1) /* Receive FIFO Reset */
#define URFC_URFE (1 << 0) /* FIFO Enable */
/* Line Control Register */
#define URLC_URSBC (1 << 6) /* Set Break Condition */
#define URLC_PARITY (7 << 3) /* Parity */
#define URPE_NONE (0 << 3)
#define URPE_ODD (1 << 3)
#define URPE_EVEN (3 << 3)
#define URPE_MARK (5 << 3)
#define URPE_SPACE (7 << 3)
#define URLC_URSB (1 << 2) /* Stop Bits */
#define URLC_URCL (3 << 0) /* Character Length */
#define URCL_5 (0 << 0)
#define URCL_6 (1 << 0)
#define URCL_7 (2 << 0)
#define URCL_8 (3 << 0)
/* Modem Control Register */
#define URMC_URLB (1 << 4) /* Loop-back mode */
#define URMC_UROUT2 (1 << 3) /* OUT2 signal */
#define URMC_UROUT1 (1 << 2) /* OUT1 signal */
#define URMC_URRTS (1 << 1) /* Request to Send */
#define URMC_URDTR (1 << 0) /* Data Terminal Ready */
/* Line Status Register */
#define URLS_URRFE (1 << 7) /* Receive FIFO Error */
#define URLS_URTE (1 << 6) /* Transmit Empty */
#define URLS_URTHRE (1 << 5) /* Transmit Holding Register Empty */
#define URLS_URBI (1 << 4) /* Break Interrupt */
#define URLS_URFE (1 << 3) /* Framing Error */
#define URLS_URPE (1 << 2) /* Parity Error */
#define URLS_URROE (1 << 1) /* Receive Overrun Error */
#define URLS_URDR (1 << 0) /* Receive Data Ready */
/* Modem Status Register */
#define URMS_URDCD (1 << 7) /* Data Carrier Detect */
#define URMS_URRI (1 << 6) /* Ring Indicator */
#define URMS_URDSR (1 << 5) /* Data Set Ready */
#define URMS_URCTS (1 << 4) /* Clear to Send */
#define URMS_URDDCD (1 << 3) /* Delta Data Carrier Detect */
#define URMS_URTERI (1 << 2) /* Trailing Edge Ring Indicator */
#define URMS_URDDST (1 << 1) /* Delta Data Set Ready */
#define URMS_URDCTS (1 << 0) /* Delta Clear to Send */
/* Status Register */
#define USR_UTI (1 << 0) /* Timeout Indication */
#endif