forked from luck/tmp_suning_uos_patched
cf910e83ae
[Purpose of this patch] As Vaibhav explained in the thread below, tracepoints for irq vectors are useful. http://www.spinics.net/lists/mm-commits/msg85707.html <snip> The current interrupt traces from irq_handler_entry and irq_handler_exit provide when an interrupt is handled. They provide good data about when the system has switched to kernel space and how it affects the currently running processes. There are some IRQ vectors which trigger the system into kernel space, which are not handled in generic IRQ handlers. Tracing such events gives us the information about IRQ interaction with other system events. The trace also tells where the system is spending its time. We want to know which cores are handling interrupts and how they are affecting other processes in the system. Also, the trace provides information about when the cores are idle and which interrupts are changing that state. <snip> On the other hand, my usecase is tracing just local timer event and getting a value of instruction pointer. I suggested to add an argument local timer event to get instruction pointer before. But there is another way to get it with external module like systemtap. So, I don't need to add any argument to irq vector tracepoints now. [Patch Description] Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events. But there is an above use case to trace specific irq_vector rather than tracing all events. In this case, we are concerned about overhead due to unwanted events. So, add following tracepoints instead of introducing irq_vector_entry/exit. so that we can enable them independently. - local_timer_vector - reschedule_vector - call_function_vector - call_function_single_vector - irq_work_entry_vector - error_apic_vector - thermal_apic_vector - threshold_apic_vector - spurious_apic_vector - x86_platform_ipi_vector Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty makes a zero when tracepoints are disabled. Detailed explanations are as follows. - Create trace irq handlers with entering_irq()/exiting_irq(). - Create a new IDT, trace_idt_table, at boot time by adding a logic to _set_gate(). It is just a copy of original idt table. - Register the new handlers for tracpoints to the new IDT by introducing macros to alloc_intr_gate() called at registering time of irq_vector handlers. - Add checking, whether irq vector tracing is on/off, into load_current_idt(). This has to be done below debug checking for these reasons. - Switching to debug IDT may be kicked while tracing is enabled. - On the other hands, switching to trace IDT is kicked only when debugging is disabled. In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being used for other purposes. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org>
54 lines
1.7 KiB
C
54 lines
1.7 KiB
C
/*
|
|
* This file is designed to contain the BUILD_INTERRUPT specifications for
|
|
* all of the extra named interrupt vectors used by the architecture.
|
|
* Usually this is the Inter Process Interrupts (IPIs)
|
|
*/
|
|
|
|
/*
|
|
* The following vectors are part of the Linux architecture, there
|
|
* is no hardware IRQ pin equivalent for them, they are triggered
|
|
* through the ICC by us (IPIs)
|
|
*/
|
|
#ifdef CONFIG_SMP
|
|
BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
|
|
BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
|
|
BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR)
|
|
BUILD_INTERRUPT3(irq_move_cleanup_interrupt, IRQ_MOVE_CLEANUP_VECTOR,
|
|
smp_irq_move_cleanup_interrupt)
|
|
BUILD_INTERRUPT3(reboot_interrupt, REBOOT_VECTOR, smp_reboot_interrupt)
|
|
#endif
|
|
|
|
BUILD_INTERRUPT(x86_platform_ipi, X86_PLATFORM_IPI_VECTOR)
|
|
|
|
#ifdef CONFIG_HAVE_KVM
|
|
BUILD_INTERRUPT3(kvm_posted_intr_ipi, POSTED_INTR_VECTOR,
|
|
smp_kvm_posted_intr_ipi)
|
|
#endif
|
|
|
|
/*
|
|
* every pentium local APIC has two 'local interrupts', with a
|
|
* soft-definable vector attached to both interrupts, one of
|
|
* which is a timer interrupt, the other one is error counter
|
|
* overflow. Linux uses the local APIC timer interrupt to get
|
|
* a much simpler SMP time architecture:
|
|
*/
|
|
#ifdef CONFIG_X86_LOCAL_APIC
|
|
|
|
BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
|
|
BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
|
|
BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
|
|
|
|
#ifdef CONFIG_IRQ_WORK
|
|
BUILD_INTERRUPT(irq_work_interrupt, IRQ_WORK_VECTOR)
|
|
#endif
|
|
|
|
#ifdef CONFIG_X86_THERMAL_VECTOR
|
|
BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
|
|
#endif
|
|
|
|
#ifdef CONFIG_X86_MCE_THRESHOLD
|
|
BUILD_INTERRUPT(threshold_interrupt,THRESHOLD_APIC_VECTOR)
|
|
#endif
|
|
|
|
#endif
|