kernel_optimize_test/drivers/iio/imu/adis16400_buffer.c
Lars-Peter Clausen d6b09bd85d staging:iio: Move adis16400 out of staging
This adis16400 driver is in pretty good shape now, so move it out of staging.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-26 10:07:50 +00:00

97 lines
2.3 KiB
C

#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/export.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>
#include "adis16400.h"
int adis16400_update_scan_mode(struct iio_dev *indio_dev,
const unsigned long *scan_mask)
{
struct adis16400_state *st = iio_priv(indio_dev);
struct adis *adis = &st->adis;
uint16_t *tx, *rx;
if (st->variant->flags & ADIS16400_NO_BURST)
return adis_update_scan_mode(indio_dev, scan_mask);
kfree(adis->xfer);
kfree(adis->buffer);
adis->xfer = kcalloc(2, sizeof(*adis->xfer), GFP_KERNEL);
if (!adis->xfer)
return -ENOMEM;
adis->buffer = kzalloc(indio_dev->scan_bytes + sizeof(u16),
GFP_KERNEL);
if (!adis->buffer)
return -ENOMEM;
rx = adis->buffer;
tx = adis->buffer + indio_dev->scan_bytes;
tx[0] = ADIS_READ_REG(ADIS16400_GLOB_CMD);
tx[1] = 0;
adis->xfer[0].tx_buf = tx;
adis->xfer[0].bits_per_word = 8;
adis->xfer[0].len = 2;
adis->xfer[1].tx_buf = tx;
adis->xfer[1].bits_per_word = 8;
adis->xfer[1].len = indio_dev->scan_bytes;
spi_message_init(&adis->msg);
spi_message_add_tail(&adis->xfer[0], &adis->msg);
spi_message_add_tail(&adis->xfer[1], &adis->msg);
return 0;
}
irqreturn_t adis16400_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct adis16400_state *st = iio_priv(indio_dev);
struct adis *adis = &st->adis;
u32 old_speed_hz = st->adis.spi->max_speed_hz;
int ret;
if (!adis->buffer)
return -ENOMEM;
if (!(st->variant->flags & ADIS16400_NO_BURST) &&
st->adis.spi->max_speed_hz > ADIS16400_SPI_BURST) {
st->adis.spi->max_speed_hz = ADIS16400_SPI_BURST;
spi_setup(st->adis.spi);
}
ret = spi_sync(adis->spi, &adis->msg);
if (ret)
dev_err(&adis->spi->dev, "Failed to read data: %d\n", ret);
if (!(st->variant->flags & ADIS16400_NO_BURST)) {
st->adis.spi->max_speed_hz = old_speed_hz;
spi_setup(st->adis.spi);
}
/* Guaranteed to be aligned with 8 byte boundary */
if (indio_dev->scan_timestamp) {
void *b = adis->buffer + indio_dev->scan_bytes - sizeof(s64);
*(s64 *)b = pf->timestamp;
}
iio_push_to_buffers(indio_dev, adis->buffer);
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}