forked from luck/tmp_suning_uos_patched
143a2e54bf
Some more cleaning-up of the watchdog drivers. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
1041 lines
27 KiB
C
1041 lines
27 KiB
C
/*
|
|
* PC Watchdog Driver
|
|
* by Ken Hollis (khollis@bitgate.com)
|
|
*
|
|
* Permission granted from Simon Machell (smachell@berkprod.com)
|
|
* Written for the Linux Kernel, and GPLed by Ken Hollis
|
|
*
|
|
* 960107 Added request_region routines, modulized the whole thing.
|
|
* 960108 Fixed end-of-file pointer (Thanks to Dan Hollis), added
|
|
* WD_TIMEOUT define.
|
|
* 960216 Added eof marker on the file, and changed verbose messages.
|
|
* 960716 Made functional and cosmetic changes to the source for
|
|
* inclusion in Linux 2.0.x kernels, thanks to Alan Cox.
|
|
* 960717 Removed read/seek routines, replaced with ioctl. Also, added
|
|
* check_region command due to Alan's suggestion.
|
|
* 960821 Made changes to compile in newer 2.0.x kernels. Added
|
|
* "cold reboot sense" entry.
|
|
* 960825 Made a few changes to code, deleted some defines and made
|
|
* typedefs to replace them. Made heartbeat reset only available
|
|
* via ioctl, and removed the write routine.
|
|
* 960828 Added new items for PC Watchdog Rev.C card.
|
|
* 960829 Changed around all of the IOCTLs, added new features,
|
|
* added watchdog disable/re-enable routines. Added firmware
|
|
* version reporting. Added read routine for temperature.
|
|
* Removed some extra defines, added an autodetect Revision
|
|
* routine.
|
|
* 961006 Revised some documentation, fixed some cosmetic bugs. Made
|
|
* drivers to panic the system if it's overheating at bootup.
|
|
* 961118 Changed some verbiage on some of the output, tidied up
|
|
* code bits, and added compatibility to 2.1.x.
|
|
* 970912 Enabled board on open and disable on close.
|
|
* 971107 Took account of recent VFS changes (broke read).
|
|
* 971210 Disable board on initialisation in case board already ticking.
|
|
* 971222 Changed open/close for temperature handling
|
|
* Michael Meskes <meskes@debian.org>.
|
|
* 980112 Used minor numbers from include/linux/miscdevice.h
|
|
* 990403 Clear reset status after reading control status register in
|
|
* pcwd_showprevstate(). [Marc Boucher <marc@mbsi.ca>]
|
|
* 990605 Made changes to code to support Firmware 1.22a, added
|
|
* fairly useless proc entry.
|
|
* 990610 removed said useless proc code for the merge <alan>
|
|
* 000403 Removed last traces of proc code. <davej>
|
|
* 011214 Added nowayout module option to override
|
|
* CONFIG_WATCHDOG_NOWAYOUT <Matt_Domsch@dell.com>
|
|
* Added timeout module option to override default
|
|
*/
|
|
|
|
/*
|
|
* A bells and whistles driver is available from http://www.pcwd.de/
|
|
* More info available at http://www.berkprod.com/ or
|
|
* http://www.pcwatchdog.com/
|
|
*/
|
|
|
|
#include <linux/module.h> /* For module specific items */
|
|
#include <linux/moduleparam.h> /* For new moduleparam's */
|
|
#include <linux/types.h> /* For standard types (like size_t) */
|
|
#include <linux/errno.h> /* For the -ENODEV/... values */
|
|
#include <linux/kernel.h> /* For printk/panic/... */
|
|
#include <linux/delay.h> /* For mdelay function */
|
|
#include <linux/timer.h> /* For timer related operations */
|
|
#include <linux/jiffies.h> /* For jiffies stuff */
|
|
#include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */
|
|
#include <linux/watchdog.h> /* For the watchdog specific items */
|
|
#include <linux/reboot.h> /* For kernel_power_off() */
|
|
#include <linux/init.h> /* For __init/__exit/... */
|
|
#include <linux/fs.h> /* For file operations */
|
|
#include <linux/isa.h> /* For isa devices */
|
|
#include <linux/ioport.h> /* For io-port access */
|
|
#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
|
|
#include <linux/uaccess.h> /* For copy_to_user/put_user/... */
|
|
#include <linux/io.h> /* For inb/outb/... */
|
|
|
|
/* Module and version information */
|
|
#define WATCHDOG_VERSION "1.20"
|
|
#define WATCHDOG_DATE "18 Feb 2007"
|
|
#define WATCHDOG_DRIVER_NAME "ISA-PC Watchdog"
|
|
#define WATCHDOG_NAME "pcwd"
|
|
#define PFX WATCHDOG_NAME ": "
|
|
#define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION "\n"
|
|
|
|
/*
|
|
* It should be noted that PCWD_REVISION_B was removed because A and B
|
|
* are essentially the same types of card, with the exception that B
|
|
* has temperature reporting. Since I didn't receive a Rev.B card,
|
|
* the Rev.B card is not supported. (It's a good thing too, as they
|
|
* are no longer in production.)
|
|
*/
|
|
#define PCWD_REVISION_A 1
|
|
#define PCWD_REVISION_C 2
|
|
|
|
/*
|
|
* These are the auto-probe addresses available.
|
|
*
|
|
* Revision A only uses ports 0x270 and 0x370. Revision C introduced 0x350.
|
|
* Revision A has an address range of 2 addresses, while Revision C has 4.
|
|
*/
|
|
#define PCWD_ISA_NR_CARDS 3
|
|
static int pcwd_ioports[] = { 0x270, 0x350, 0x370, 0x000 };
|
|
|
|
/*
|
|
* These are the defines that describe the control status bits for the
|
|
* PCI-PC Watchdog card.
|
|
*/
|
|
/* Port 1 : Control Status #1 for the PC Watchdog card, revision A. */
|
|
#define WD_WDRST 0x01 /* Previously reset state */
|
|
#define WD_T110 0x02 /* Temperature overheat sense */
|
|
#define WD_HRTBT 0x04 /* Heartbeat sense */
|
|
#define WD_RLY2 0x08 /* External relay triggered */
|
|
#define WD_SRLY2 0x80 /* Software external relay triggered */
|
|
/* Port 1 : Control Status #1 for the PC Watchdog card, revision C. */
|
|
#define WD_REVC_WTRP 0x01 /* Watchdog Trip status */
|
|
#define WD_REVC_HRBT 0x02 /* Watchdog Heartbeat */
|
|
#define WD_REVC_TTRP 0x04 /* Temperature Trip status */
|
|
#define WD_REVC_RL2A 0x08 /* Relay 2 activated by
|
|
on-board processor */
|
|
#define WD_REVC_RL1A 0x10 /* Relay 1 active */
|
|
#define WD_REVC_R2DS 0x40 /* Relay 2 disable */
|
|
#define WD_REVC_RLY2 0x80 /* Relay 2 activated? */
|
|
/* Port 2 : Control Status #2 */
|
|
#define WD_WDIS 0x10 /* Watchdog Disabled */
|
|
#define WD_ENTP 0x20 /* Watchdog Enable Temperature Trip */
|
|
#define WD_SSEL 0x40 /* Watchdog Switch Select
|
|
(1:SW1 <-> 0:SW2) */
|
|
#define WD_WCMD 0x80 /* Watchdog Command Mode */
|
|
|
|
/* max. time we give an ISA watchdog card to process a command */
|
|
/* 500ms for each 4 bit response (according to spec.) */
|
|
#define ISA_COMMAND_TIMEOUT 1000
|
|
|
|
/* Watchdog's internal commands */
|
|
#define CMD_ISA_IDLE 0x00
|
|
#define CMD_ISA_VERSION_INTEGER 0x01
|
|
#define CMD_ISA_VERSION_TENTH 0x02
|
|
#define CMD_ISA_VERSION_HUNDRETH 0x03
|
|
#define CMD_ISA_VERSION_MINOR 0x04
|
|
#define CMD_ISA_SWITCH_SETTINGS 0x05
|
|
#define CMD_ISA_RESET_PC 0x06
|
|
#define CMD_ISA_ARM_0 0x07
|
|
#define CMD_ISA_ARM_30 0x08
|
|
#define CMD_ISA_ARM_60 0x09
|
|
#define CMD_ISA_DELAY_TIME_2SECS 0x0A
|
|
#define CMD_ISA_DELAY_TIME_4SECS 0x0B
|
|
#define CMD_ISA_DELAY_TIME_8SECS 0x0C
|
|
#define CMD_ISA_RESET_RELAYS 0x0D
|
|
|
|
/* Watchdog's Dip Switch heartbeat values */
|
|
static const int heartbeat_tbl[] = {
|
|
20, /* OFF-OFF-OFF = 20 Sec */
|
|
40, /* OFF-OFF-ON = 40 Sec */
|
|
60, /* OFF-ON-OFF = 1 Min */
|
|
300, /* OFF-ON-ON = 5 Min */
|
|
600, /* ON-OFF-OFF = 10 Min */
|
|
1800, /* ON-OFF-ON = 30 Min */
|
|
3600, /* ON-ON-OFF = 1 Hour */
|
|
7200, /* ON-ON-ON = 2 hour */
|
|
};
|
|
|
|
/*
|
|
* We are using an kernel timer to do the pinging of the watchdog
|
|
* every ~500ms. We try to set the internal heartbeat of the
|
|
* watchdog to 2 ms.
|
|
*/
|
|
|
|
#define WDT_INTERVAL (HZ/2+1)
|
|
|
|
/* We can only use 1 card due to the /dev/watchdog restriction */
|
|
static int cards_found;
|
|
|
|
/* internal variables */
|
|
static unsigned long open_allowed;
|
|
static char expect_close;
|
|
static int temp_panic;
|
|
|
|
/* this is private data for each ISA-PC watchdog card */
|
|
static struct {
|
|
char fw_ver_str[6]; /* The cards firmware version */
|
|
int revision; /* The card's revision */
|
|
int supports_temp; /* Whether or not the card has
|
|
a temperature device */
|
|
int command_mode; /* Whether or not the card is in
|
|
command mode */
|
|
int boot_status; /* The card's boot status */
|
|
int io_addr; /* The cards I/O address */
|
|
spinlock_t io_lock; /* the lock for io operations */
|
|
struct timer_list timer; /* The timer that pings the watchdog */
|
|
unsigned long next_heartbeat; /* the next_heartbeat for the timer */
|
|
} pcwd_private;
|
|
|
|
/* module parameters */
|
|
#define QUIET 0 /* Default */
|
|
#define VERBOSE 1 /* Verbose */
|
|
#define DEBUG 2 /* print fancy stuff too */
|
|
static int debug = QUIET;
|
|
module_param(debug, int, 0);
|
|
MODULE_PARM_DESC(debug,
|
|
"Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)");
|
|
|
|
/* default heartbeat = delay-time from dip-switches */
|
|
#define WATCHDOG_HEARTBEAT 0
|
|
static int heartbeat = WATCHDOG_HEARTBEAT;
|
|
module_param(heartbeat, int, 0);
|
|
MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. "
|
|
"(2 <= heartbeat <= 7200 or 0=delay-time from dip-switches, default="
|
|
__MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
|
|
|
|
static int nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, int, 0);
|
|
MODULE_PARM_DESC(nowayout,
|
|
"Watchdog cannot be stopped once started (default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
/*
|
|
* Internal functions
|
|
*/
|
|
|
|
static int send_isa_command(int cmd)
|
|
{
|
|
int i;
|
|
int control_status;
|
|
int port0, last_port0; /* Double read for stabilising */
|
|
|
|
if (debug >= DEBUG)
|
|
printk(KERN_DEBUG PFX "sending following data cmd=0x%02x\n",
|
|
cmd);
|
|
|
|
/* The WCMD bit must be 1 and the command is only 4 bits in size */
|
|
control_status = (cmd & 0x0F) | WD_WCMD;
|
|
outb_p(control_status, pcwd_private.io_addr + 2);
|
|
udelay(ISA_COMMAND_TIMEOUT);
|
|
|
|
port0 = inb_p(pcwd_private.io_addr);
|
|
for (i = 0; i < 25; ++i) {
|
|
last_port0 = port0;
|
|
port0 = inb_p(pcwd_private.io_addr);
|
|
|
|
if (port0 == last_port0)
|
|
break; /* Data is stable */
|
|
|
|
udelay(250);
|
|
}
|
|
|
|
if (debug >= DEBUG)
|
|
printk(KERN_DEBUG PFX "received following data for "
|
|
"cmd=0x%02x: port0=0x%02x last_port0=0x%02x\n",
|
|
cmd, port0, last_port0);
|
|
|
|
return port0;
|
|
}
|
|
|
|
static int set_command_mode(void)
|
|
{
|
|
int i, found = 0, count = 0;
|
|
|
|
/* Set the card into command mode */
|
|
spin_lock(&pcwd_private.io_lock);
|
|
while ((!found) && (count < 3)) {
|
|
i = send_isa_command(CMD_ISA_IDLE);
|
|
|
|
if (i == 0x00)
|
|
found = 1;
|
|
else if (i == 0xF3) {
|
|
/* Card does not like what we've done to it */
|
|
outb_p(0x00, pcwd_private.io_addr + 2);
|
|
udelay(1200); /* Spec says wait 1ms */
|
|
outb_p(0x00, pcwd_private.io_addr + 2);
|
|
udelay(ISA_COMMAND_TIMEOUT);
|
|
}
|
|
count++;
|
|
}
|
|
spin_unlock(&pcwd_private.io_lock);
|
|
pcwd_private.command_mode = found;
|
|
|
|
if (debug >= DEBUG)
|
|
printk(KERN_DEBUG PFX "command_mode=%d\n",
|
|
pcwd_private.command_mode);
|
|
|
|
return found;
|
|
}
|
|
|
|
static void unset_command_mode(void)
|
|
{
|
|
/* Set the card into normal mode */
|
|
spin_lock(&pcwd_private.io_lock);
|
|
outb_p(0x00, pcwd_private.io_addr + 2);
|
|
udelay(ISA_COMMAND_TIMEOUT);
|
|
spin_unlock(&pcwd_private.io_lock);
|
|
|
|
pcwd_private.command_mode = 0;
|
|
|
|
if (debug >= DEBUG)
|
|
printk(KERN_DEBUG PFX "command_mode=%d\n",
|
|
pcwd_private.command_mode);
|
|
}
|
|
|
|
static inline void pcwd_check_temperature_support(void)
|
|
{
|
|
if (inb(pcwd_private.io_addr) != 0xF0)
|
|
pcwd_private.supports_temp = 1;
|
|
}
|
|
|
|
static inline void pcwd_get_firmware(void)
|
|
{
|
|
int one, ten, hund, minor;
|
|
|
|
strcpy(pcwd_private.fw_ver_str, "ERROR");
|
|
|
|
if (set_command_mode()) {
|
|
one = send_isa_command(CMD_ISA_VERSION_INTEGER);
|
|
ten = send_isa_command(CMD_ISA_VERSION_TENTH);
|
|
hund = send_isa_command(CMD_ISA_VERSION_HUNDRETH);
|
|
minor = send_isa_command(CMD_ISA_VERSION_MINOR);
|
|
sprintf(pcwd_private.fw_ver_str, "%c.%c%c%c",
|
|
one, ten, hund, minor);
|
|
}
|
|
unset_command_mode();
|
|
|
|
return;
|
|
}
|
|
|
|
static inline int pcwd_get_option_switches(void)
|
|
{
|
|
int option_switches = 0;
|
|
|
|
if (set_command_mode()) {
|
|
/* Get switch settings */
|
|
option_switches = send_isa_command(CMD_ISA_SWITCH_SETTINGS);
|
|
}
|
|
|
|
unset_command_mode();
|
|
return option_switches;
|
|
}
|
|
|
|
static void pcwd_show_card_info(void)
|
|
{
|
|
int option_switches;
|
|
|
|
/* Get some extra info from the hardware (in command/debug/diag mode) */
|
|
if (pcwd_private.revision == PCWD_REVISION_A)
|
|
printk(KERN_INFO PFX
|
|
"ISA-PC Watchdog (REV.A) detected at port 0x%04x\n",
|
|
pcwd_private.io_addr);
|
|
else if (pcwd_private.revision == PCWD_REVISION_C) {
|
|
pcwd_get_firmware();
|
|
printk(KERN_INFO PFX "ISA-PC Watchdog (REV.C) detected at port "
|
|
"0x%04x (Firmware version: %s)\n",
|
|
pcwd_private.io_addr, pcwd_private.fw_ver_str);
|
|
option_switches = pcwd_get_option_switches();
|
|
printk(KERN_INFO PFX "Option switches (0x%02x): "
|
|
"Temperature Reset Enable=%s, Power On Delay=%s\n",
|
|
option_switches,
|
|
((option_switches & 0x10) ? "ON" : "OFF"),
|
|
((option_switches & 0x08) ? "ON" : "OFF"));
|
|
|
|
/* Reprogram internal heartbeat to 2 seconds */
|
|
if (set_command_mode()) {
|
|
send_isa_command(CMD_ISA_DELAY_TIME_2SECS);
|
|
unset_command_mode();
|
|
}
|
|
}
|
|
|
|
if (pcwd_private.supports_temp)
|
|
printk(KERN_INFO PFX "Temperature Option Detected\n");
|
|
|
|
if (pcwd_private.boot_status & WDIOF_CARDRESET)
|
|
printk(KERN_INFO PFX
|
|
"Previous reboot was caused by the card\n");
|
|
|
|
if (pcwd_private.boot_status & WDIOF_OVERHEAT) {
|
|
printk(KERN_EMERG PFX
|
|
"Card senses a CPU Overheat. Panicking!\n");
|
|
printk(KERN_EMERG PFX
|
|
"CPU Overheat\n");
|
|
}
|
|
|
|
if (pcwd_private.boot_status == 0)
|
|
printk(KERN_INFO PFX
|
|
"No previous trip detected - Cold boot or reset\n");
|
|
}
|
|
|
|
static void pcwd_timer_ping(unsigned long data)
|
|
{
|
|
int wdrst_stat;
|
|
|
|
/* If we got a heartbeat pulse within the WDT_INTERVAL
|
|
* we agree to ping the WDT */
|
|
if (time_before(jiffies, pcwd_private.next_heartbeat)) {
|
|
/* Ping the watchdog */
|
|
spin_lock(&pcwd_private.io_lock);
|
|
if (pcwd_private.revision == PCWD_REVISION_A) {
|
|
/* Rev A cards are reset by setting the
|
|
WD_WDRST bit in register 1 */
|
|
wdrst_stat = inb_p(pcwd_private.io_addr);
|
|
wdrst_stat &= 0x0F;
|
|
wdrst_stat |= WD_WDRST;
|
|
|
|
outb_p(wdrst_stat, pcwd_private.io_addr + 1);
|
|
} else {
|
|
/* Re-trigger watchdog by writing to port 0 */
|
|
outb_p(0x00, pcwd_private.io_addr);
|
|
}
|
|
|
|
/* Re-set the timer interval */
|
|
mod_timer(&pcwd_private.timer, jiffies + WDT_INTERVAL);
|
|
|
|
spin_unlock(&pcwd_private.io_lock);
|
|
} else {
|
|
printk(KERN_WARNING PFX
|
|
"Heartbeat lost! Will not ping the watchdog\n");
|
|
}
|
|
}
|
|
|
|
static int pcwd_start(void)
|
|
{
|
|
int stat_reg;
|
|
|
|
pcwd_private.next_heartbeat = jiffies + (heartbeat * HZ);
|
|
|
|
/* Start the timer */
|
|
mod_timer(&pcwd_private.timer, jiffies + WDT_INTERVAL);
|
|
|
|
/* Enable the port */
|
|
if (pcwd_private.revision == PCWD_REVISION_C) {
|
|
spin_lock(&pcwd_private.io_lock);
|
|
outb_p(0x00, pcwd_private.io_addr + 3);
|
|
udelay(ISA_COMMAND_TIMEOUT);
|
|
stat_reg = inb_p(pcwd_private.io_addr + 2);
|
|
spin_unlock(&pcwd_private.io_lock);
|
|
if (stat_reg & WD_WDIS) {
|
|
printk(KERN_INFO PFX "Could not start watchdog\n");
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
if (debug >= VERBOSE)
|
|
printk(KERN_DEBUG PFX "Watchdog started\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcwd_stop(void)
|
|
{
|
|
int stat_reg;
|
|
|
|
/* Stop the timer */
|
|
del_timer(&pcwd_private.timer);
|
|
|
|
/* Disable the board */
|
|
if (pcwd_private.revision == PCWD_REVISION_C) {
|
|
spin_lock(&pcwd_private.io_lock);
|
|
outb_p(0xA5, pcwd_private.io_addr + 3);
|
|
udelay(ISA_COMMAND_TIMEOUT);
|
|
outb_p(0xA5, pcwd_private.io_addr + 3);
|
|
udelay(ISA_COMMAND_TIMEOUT);
|
|
stat_reg = inb_p(pcwd_private.io_addr + 2);
|
|
spin_unlock(&pcwd_private.io_lock);
|
|
if ((stat_reg & WD_WDIS) == 0) {
|
|
printk(KERN_INFO PFX "Could not stop watchdog\n");
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
if (debug >= VERBOSE)
|
|
printk(KERN_DEBUG PFX "Watchdog stopped\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcwd_keepalive(void)
|
|
{
|
|
/* user land ping */
|
|
pcwd_private.next_heartbeat = jiffies + (heartbeat * HZ);
|
|
|
|
if (debug >= DEBUG)
|
|
printk(KERN_DEBUG PFX "Watchdog keepalive signal send\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcwd_set_heartbeat(int t)
|
|
{
|
|
if (t < 2 || t > 7200) /* arbitrary upper limit */
|
|
return -EINVAL;
|
|
|
|
heartbeat = t;
|
|
|
|
if (debug >= VERBOSE)
|
|
printk(KERN_DEBUG PFX "New heartbeat: %d\n",
|
|
heartbeat);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcwd_get_status(int *status)
|
|
{
|
|
int control_status;
|
|
|
|
*status = 0;
|
|
spin_lock(&pcwd_private.io_lock);
|
|
if (pcwd_private.revision == PCWD_REVISION_A)
|
|
/* Rev A cards return status information from
|
|
* the base register, which is used for the
|
|
* temperature in other cards. */
|
|
control_status = inb(pcwd_private.io_addr);
|
|
else {
|
|
/* Rev C cards return card status in the base
|
|
* address + 1 register. And use different bits
|
|
* to indicate a card initiated reset, and an
|
|
* over-temperature condition. And the reboot
|
|
* status can be reset. */
|
|
control_status = inb(pcwd_private.io_addr + 1);
|
|
}
|
|
spin_unlock(&pcwd_private.io_lock);
|
|
|
|
if (pcwd_private.revision == PCWD_REVISION_A) {
|
|
if (control_status & WD_WDRST)
|
|
*status |= WDIOF_CARDRESET;
|
|
|
|
if (control_status & WD_T110) {
|
|
*status |= WDIOF_OVERHEAT;
|
|
if (temp_panic) {
|
|
printk(KERN_INFO PFX
|
|
"Temperature overheat trip!\n");
|
|
kernel_power_off();
|
|
}
|
|
}
|
|
} else {
|
|
if (control_status & WD_REVC_WTRP)
|
|
*status |= WDIOF_CARDRESET;
|
|
|
|
if (control_status & WD_REVC_TTRP) {
|
|
*status |= WDIOF_OVERHEAT;
|
|
if (temp_panic) {
|
|
printk(KERN_INFO PFX
|
|
"Temperature overheat trip!\n");
|
|
kernel_power_off();
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcwd_clear_status(void)
|
|
{
|
|
int control_status;
|
|
|
|
if (pcwd_private.revision == PCWD_REVISION_C) {
|
|
spin_lock(&pcwd_private.io_lock);
|
|
|
|
if (debug >= VERBOSE)
|
|
printk(KERN_INFO PFX
|
|
"clearing watchdog trip status\n");
|
|
|
|
control_status = inb_p(pcwd_private.io_addr + 1);
|
|
|
|
if (debug >= DEBUG) {
|
|
printk(KERN_DEBUG PFX "status was: 0x%02x\n",
|
|
control_status);
|
|
printk(KERN_DEBUG PFX "sending: 0x%02x\n",
|
|
(control_status & WD_REVC_R2DS));
|
|
}
|
|
|
|
/* clear reset status & Keep Relay 2 disable state as it is */
|
|
outb_p((control_status & WD_REVC_R2DS),
|
|
pcwd_private.io_addr + 1);
|
|
|
|
spin_unlock(&pcwd_private.io_lock);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int pcwd_get_temperature(int *temperature)
|
|
{
|
|
/* check that port 0 gives temperature info and no command results */
|
|
if (pcwd_private.command_mode)
|
|
return -1;
|
|
|
|
*temperature = 0;
|
|
if (!pcwd_private.supports_temp)
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* Convert celsius to fahrenheit, since this was
|
|
* the decided 'standard' for this return value.
|
|
*/
|
|
spin_lock(&pcwd_private.io_lock);
|
|
*temperature = ((inb(pcwd_private.io_addr)) * 9 / 5) + 32;
|
|
spin_unlock(&pcwd_private.io_lock);
|
|
|
|
if (debug >= DEBUG) {
|
|
printk(KERN_DEBUG PFX "temperature is: %d F\n",
|
|
*temperature);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* /dev/watchdog handling
|
|
*/
|
|
|
|
static long pcwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
|
|
{
|
|
int rv;
|
|
int status;
|
|
int temperature;
|
|
int new_heartbeat;
|
|
int __user *argp = (int __user *)arg;
|
|
static struct watchdog_info ident = {
|
|
.options = WDIOF_OVERHEAT |
|
|
WDIOF_CARDRESET |
|
|
WDIOF_KEEPALIVEPING |
|
|
WDIOF_SETTIMEOUT |
|
|
WDIOF_MAGICCLOSE,
|
|
.firmware_version = 1,
|
|
.identity = "PCWD",
|
|
};
|
|
|
|
switch (cmd) {
|
|
case WDIOC_GETSUPPORT:
|
|
if (copy_to_user(argp, &ident, sizeof(ident)))
|
|
return -EFAULT;
|
|
return 0;
|
|
|
|
case WDIOC_GETSTATUS:
|
|
pcwd_get_status(&status);
|
|
return put_user(status, argp);
|
|
|
|
case WDIOC_GETBOOTSTATUS:
|
|
return put_user(pcwd_private.boot_status, argp);
|
|
|
|
case WDIOC_GETTEMP:
|
|
if (pcwd_get_temperature(&temperature))
|
|
return -EFAULT;
|
|
|
|
return put_user(temperature, argp);
|
|
|
|
case WDIOC_SETOPTIONS:
|
|
if (pcwd_private.revision == PCWD_REVISION_C) {
|
|
if (get_user(rv, argp))
|
|
return -EFAULT;
|
|
|
|
if (rv & WDIOS_DISABLECARD) {
|
|
status = pcwd_stop();
|
|
if (status < 0)
|
|
return status;
|
|
}
|
|
if (rv & WDIOS_ENABLECARD) {
|
|
status = pcwd_start();
|
|
if (status < 0)
|
|
return status;
|
|
}
|
|
if (rv & WDIOS_TEMPPANIC)
|
|
temp_panic = 1;
|
|
}
|
|
return -EINVAL;
|
|
|
|
case WDIOC_KEEPALIVE:
|
|
pcwd_keepalive();
|
|
return 0;
|
|
|
|
case WDIOC_SETTIMEOUT:
|
|
if (get_user(new_heartbeat, argp))
|
|
return -EFAULT;
|
|
|
|
if (pcwd_set_heartbeat(new_heartbeat))
|
|
return -EINVAL;
|
|
|
|
pcwd_keepalive();
|
|
/* Fall */
|
|
|
|
case WDIOC_GETTIMEOUT:
|
|
return put_user(heartbeat, argp);
|
|
|
|
default:
|
|
return -ENOTTY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t pcwd_write(struct file *file, const char __user *buf, size_t len,
|
|
loff_t *ppos)
|
|
{
|
|
if (len) {
|
|
if (!nowayout) {
|
|
size_t i;
|
|
|
|
/* In case it was set long ago */
|
|
expect_close = 0;
|
|
|
|
for (i = 0; i != len; i++) {
|
|
char c;
|
|
|
|
if (get_user(c, buf + i))
|
|
return -EFAULT;
|
|
if (c == 'V')
|
|
expect_close = 42;
|
|
}
|
|
}
|
|
pcwd_keepalive();
|
|
}
|
|
return len;
|
|
}
|
|
|
|
static int pcwd_open(struct inode *inode, struct file *file)
|
|
{
|
|
if (test_and_set_bit(0, &open_allowed))
|
|
return -EBUSY;
|
|
if (nowayout)
|
|
__module_get(THIS_MODULE);
|
|
/* Activate */
|
|
pcwd_start();
|
|
pcwd_keepalive();
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
static int pcwd_close(struct inode *inode, struct file *file)
|
|
{
|
|
if (expect_close == 42)
|
|
pcwd_stop();
|
|
else {
|
|
printk(KERN_CRIT PFX
|
|
"Unexpected close, not stopping watchdog!\n");
|
|
pcwd_keepalive();
|
|
}
|
|
expect_close = 0;
|
|
clear_bit(0, &open_allowed);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* /dev/temperature handling
|
|
*/
|
|
|
|
static ssize_t pcwd_temp_read(struct file *file, char __user *buf, size_t count,
|
|
loff_t *ppos)
|
|
{
|
|
int temperature;
|
|
|
|
if (pcwd_get_temperature(&temperature))
|
|
return -EFAULT;
|
|
|
|
if (copy_to_user(buf, &temperature, 1))
|
|
return -EFAULT;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int pcwd_temp_open(struct inode *inode, struct file *file)
|
|
{
|
|
if (!pcwd_private.supports_temp)
|
|
return -ENODEV;
|
|
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
static int pcwd_temp_close(struct inode *inode, struct file *file)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Kernel Interfaces
|
|
*/
|
|
|
|
static const struct file_operations pcwd_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.write = pcwd_write,
|
|
.unlocked_ioctl = pcwd_ioctl,
|
|
.open = pcwd_open,
|
|
.release = pcwd_close,
|
|
};
|
|
|
|
static struct miscdevice pcwd_miscdev = {
|
|
.minor = WATCHDOG_MINOR,
|
|
.name = "watchdog",
|
|
.fops = &pcwd_fops,
|
|
};
|
|
|
|
static const struct file_operations pcwd_temp_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.read = pcwd_temp_read,
|
|
.open = pcwd_temp_open,
|
|
.release = pcwd_temp_close,
|
|
};
|
|
|
|
static struct miscdevice temp_miscdev = {
|
|
.minor = TEMP_MINOR,
|
|
.name = "temperature",
|
|
.fops = &pcwd_temp_fops,
|
|
};
|
|
|
|
/*
|
|
* Init & exit routines
|
|
*/
|
|
|
|
static inline int get_revision(void)
|
|
{
|
|
int r = PCWD_REVISION_C;
|
|
|
|
spin_lock(&pcwd_private.io_lock);
|
|
/* REV A cards use only 2 io ports; test
|
|
* presumes a floating bus reads as 0xff. */
|
|
if ((inb(pcwd_private.io_addr + 2) == 0xFF) ||
|
|
(inb(pcwd_private.io_addr + 3) == 0xFF))
|
|
r = PCWD_REVISION_A;
|
|
spin_unlock(&pcwd_private.io_lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
/*
|
|
* The ISA cards have a heartbeat bit in one of the registers, which
|
|
* register is card dependent. The heartbeat bit is monitored, and if
|
|
* found, is considered proof that a Berkshire card has been found.
|
|
* The initial rate is once per second at board start up, then twice
|
|
* per second for normal operation.
|
|
*/
|
|
static int __devinit pcwd_isa_match(struct device *dev, unsigned int id)
|
|
{
|
|
int base_addr = pcwd_ioports[id];
|
|
int port0, last_port0; /* Reg 0, in case it's REV A */
|
|
int port1, last_port1; /* Register 1 for REV C cards */
|
|
int i;
|
|
int retval;
|
|
|
|
if (debug >= DEBUG)
|
|
printk(KERN_DEBUG PFX "pcwd_isa_match id=%d\n",
|
|
id);
|
|
|
|
if (!request_region(base_addr, 4, "PCWD")) {
|
|
printk(KERN_INFO PFX "Port 0x%04x unavailable\n", base_addr);
|
|
return 0;
|
|
}
|
|
|
|
retval = 0;
|
|
|
|
port0 = inb_p(base_addr); /* For REV A boards */
|
|
port1 = inb_p(base_addr + 1); /* For REV C boards */
|
|
if (port0 != 0xff || port1 != 0xff) {
|
|
/* Not an 'ff' from a floating bus, so must be a card! */
|
|
for (i = 0; i < 4; ++i) {
|
|
|
|
msleep(500);
|
|
|
|
last_port0 = port0;
|
|
last_port1 = port1;
|
|
|
|
port0 = inb_p(base_addr);
|
|
port1 = inb_p(base_addr + 1);
|
|
|
|
/* Has either hearbeat bit changed? */
|
|
if ((port0 ^ last_port0) & WD_HRTBT ||
|
|
(port1 ^ last_port1) & WD_REVC_HRBT) {
|
|
retval = 1;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
release_region(base_addr, 4);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id)
|
|
{
|
|
int ret;
|
|
|
|
if (debug >= DEBUG)
|
|
printk(KERN_DEBUG PFX "pcwd_isa_probe id=%d\n",
|
|
id);
|
|
|
|
cards_found++;
|
|
if (cards_found == 1)
|
|
printk(KERN_INFO PFX "v%s Ken Hollis (kenji@bitgate.com)\n",
|
|
WATCHDOG_VERSION);
|
|
|
|
if (cards_found > 1) {
|
|
printk(KERN_ERR PFX "This driver only supports 1 device\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (pcwd_ioports[id] == 0x0000) {
|
|
printk(KERN_ERR PFX "No I/O-Address for card detected\n");
|
|
return -ENODEV;
|
|
}
|
|
pcwd_private.io_addr = pcwd_ioports[id];
|
|
|
|
spin_lock_init(&pcwd_private.io_lock);
|
|
|
|
/* Check card's revision */
|
|
pcwd_private.revision = get_revision();
|
|
|
|
if (!request_region(pcwd_private.io_addr,
|
|
(pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4, "PCWD")) {
|
|
printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
|
|
pcwd_private.io_addr);
|
|
ret = -EIO;
|
|
goto error_request_region;
|
|
}
|
|
|
|
/* Initial variables */
|
|
pcwd_private.supports_temp = 0;
|
|
temp_panic = 0;
|
|
pcwd_private.boot_status = 0x0000;
|
|
|
|
/* get the boot_status */
|
|
pcwd_get_status(&pcwd_private.boot_status);
|
|
|
|
/* clear the "card caused reboot" flag */
|
|
pcwd_clear_status();
|
|
|
|
setup_timer(&pcwd_private.timer, pcwd_timer_ping, 0);
|
|
|
|
/* Disable the board */
|
|
pcwd_stop();
|
|
|
|
/* Check whether or not the card supports the temperature device */
|
|
pcwd_check_temperature_support();
|
|
|
|
/* Show info about the card itself */
|
|
pcwd_show_card_info();
|
|
|
|
/* If heartbeat = 0 then we use the heartbeat from the dip-switches */
|
|
if (heartbeat == 0)
|
|
heartbeat = heartbeat_tbl[(pcwd_get_option_switches() & 0x07)];
|
|
|
|
/* Check that the heartbeat value is within it's range;
|
|
if not reset to the default */
|
|
if (pcwd_set_heartbeat(heartbeat)) {
|
|
pcwd_set_heartbeat(WATCHDOG_HEARTBEAT);
|
|
printk(KERN_INFO PFX
|
|
"heartbeat value must be 2 <= heartbeat <= 7200, using %d\n",
|
|
WATCHDOG_HEARTBEAT);
|
|
}
|
|
|
|
if (pcwd_private.supports_temp) {
|
|
ret = misc_register(&temp_miscdev);
|
|
if (ret) {
|
|
printk(KERN_ERR PFX
|
|
"cannot register miscdev on minor=%d (err=%d)\n",
|
|
TEMP_MINOR, ret);
|
|
goto error_misc_register_temp;
|
|
}
|
|
}
|
|
|
|
ret = misc_register(&pcwd_miscdev);
|
|
if (ret) {
|
|
printk(KERN_ERR PFX
|
|
"cannot register miscdev on minor=%d (err=%d)\n",
|
|
WATCHDOG_MINOR, ret);
|
|
goto error_misc_register_watchdog;
|
|
}
|
|
|
|
printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
|
|
heartbeat, nowayout);
|
|
|
|
return 0;
|
|
|
|
error_misc_register_watchdog:
|
|
if (pcwd_private.supports_temp)
|
|
misc_deregister(&temp_miscdev);
|
|
error_misc_register_temp:
|
|
release_region(pcwd_private.io_addr,
|
|
(pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
|
|
error_request_region:
|
|
pcwd_private.io_addr = 0x0000;
|
|
cards_found--;
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit pcwd_isa_remove(struct device *dev, unsigned int id)
|
|
{
|
|
if (debug >= DEBUG)
|
|
printk(KERN_DEBUG PFX "pcwd_isa_remove id=%d\n",
|
|
id);
|
|
|
|
if (!pcwd_private.io_addr)
|
|
return 1;
|
|
|
|
/* Disable the board */
|
|
if (!nowayout)
|
|
pcwd_stop();
|
|
|
|
/* Deregister */
|
|
misc_deregister(&pcwd_miscdev);
|
|
if (pcwd_private.supports_temp)
|
|
misc_deregister(&temp_miscdev);
|
|
release_region(pcwd_private.io_addr,
|
|
(pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
|
|
pcwd_private.io_addr = 0x0000;
|
|
cards_found--;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pcwd_isa_shutdown(struct device *dev, unsigned int id)
|
|
{
|
|
if (debug >= DEBUG)
|
|
printk(KERN_DEBUG PFX "pcwd_isa_shutdown id=%d\n",
|
|
id);
|
|
|
|
pcwd_stop();
|
|
}
|
|
|
|
static struct isa_driver pcwd_isa_driver = {
|
|
.match = pcwd_isa_match,
|
|
.probe = pcwd_isa_probe,
|
|
.remove = __devexit_p(pcwd_isa_remove),
|
|
.shutdown = pcwd_isa_shutdown,
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = WATCHDOG_NAME,
|
|
},
|
|
};
|
|
|
|
static int __init pcwd_init_module(void)
|
|
{
|
|
return isa_register_driver(&pcwd_isa_driver, PCWD_ISA_NR_CARDS);
|
|
}
|
|
|
|
static void __exit pcwd_cleanup_module(void)
|
|
{
|
|
isa_unregister_driver(&pcwd_isa_driver);
|
|
printk(KERN_INFO PFX "Watchdog Module Unloaded.\n");
|
|
}
|
|
|
|
module_init(pcwd_init_module);
|
|
module_exit(pcwd_cleanup_module);
|
|
|
|
MODULE_AUTHOR("Ken Hollis <kenji@bitgate.com>, "
|
|
"Wim Van Sebroeck <wim@iguana.be>");
|
|
MODULE_DESCRIPTION("Berkshire ISA-PC Watchdog driver");
|
|
MODULE_VERSION(WATCHDOG_VERSION);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
|
|
MODULE_ALIAS_MISCDEV(TEMP_MINOR);
|