kernel_optimize_test/arch/arm/mach-omap1
Linus Torvalds ca9eb48fe0 regulator: Regulator updates for next release
The biggest chunk of the regulator changes for this release outside of
 the new drivers is the conversion of the fixed regulator to use the GPIO
 descriptor API, there's a small addition to the GPIO API plus a bunch of
 updates to board files to implement it.  This is some really welcome
 work from Linus Walleij that's had a bunch of review and has been
 sitting in -next for a while so I'm fairly happy there's no major
 issues.
 
  - Helpers for overlapping linear ranges.
  - Display opmode and consumer requested load in the regualtor_summary
    file in debugfs, plus a fix there.
  - Support for the fun and entertaining power off mechanism that the
    pfuze100 hardware implements.
  - Conversion of the fixed regulator API to use GPIO descriptors,
    including pulling in a bunch of patches to a bunch of board files.
  - New drivers for Cirrus Logic Lochnagar, Qualcomm PMS405, Rohm
    BD71847, ST PMIC1, and TI LM363x devices.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlvNyl0THGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0DubB/4nWL/XSUb7qIm2fjjMUffelfk4/viB
 MZg3JPEMr7ahK+QC1RQ5nOmkuACSU3Uij8RE1omLp5isfCiSa+e17f9uQx4Cn/pw
 9DsIeJUEC4LvZ9gA9pDf0313B/0BIYfOMJToyLgwTNmJl+T+0e59RcS4TTCEqxwD
 PmpPakOvCTD6YuVI7HhYL/HXJK1buvrAiENSjCyfyJTDaMSzJl6WMn+eibFaZbDn
 NXwj2W+QyuiFCdl/7/4NWaqhlyOvM05ivnnLM/SPMBj+Iu4gSZ0PX81z98eZ3M66
 YSPhF2o5SkhhffFx5xjpgR3VquXDVb0oefzhvJmZYHXi7ZKKMruoYaGB
 =Ztu3
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The biggest chunk of the regulator changes for this release outside of
  the new drivers is the conversion of the fixed regulator to use the
  GPIO descriptor API, there's a small addition to the GPIO API plus a
  bunch of updates to board files to implement it. This is some really
  welcome work from Linus Walleij that's had a bunch of review and has
  been sitting in -next for a while so I'm fairly happy there's no major
  issues.

   - Helpers for overlapping linear ranges.

   - Display opmode and consumer requested load in the regualtor_summary
     file in debugfs, plus a fix there.

   - Support for the fun and entertaining power off mechanism that the
     pfuze100 hardware implements.

   - Conversion of the fixed regulator API to use GPIO descriptors,
     including pulling in a bunch of patches to a bunch of board files.

   - New drivers for Cirrus Logic Lochnagar, Qualcomm PMS405, Rohm
     BD71847, ST PMIC1, and TI LM363x devices"

* tag 'regulator-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (36 commits)
  regulator: lochnagar: Use a consisent comment style for SPDX header
  regulator: bd718x7: Remove struct bd718xx_pmic
  regulator: Fetch enable gpiods nonexclusive
  regulator/gpio: Allow nonexclusive GPIO access
  regulator: lochnagar: Add support for the Cirrus Logic Lochnagar
  regulator: stpmic1: Return REGULATOR_MODE_INVALID for invalid mode
  regulator: stpmic1: add stpmic1 regulator driver
  dt-bindings: regulator: document stpmic1 pmic regulators
  regulator: axp20x: Mark expected switch fall-throughs
  regulator: bd718xx: fix build warning on x86_64
  regulator: fixed: Default enable high on DT regulators
  regulator: bd718xx: rename bd71837 to 718xx
  regulator: bd718XX use pickable ranges
  regulator/mfd: bd718xx: rename bd71837/bd71847 common instances
  regulator: Support regulators where voltage ranges are selectable
  mfd: dt bindings: add BD71847 device-tree binding documentation
  regulator: dt bindings: add BD71847 device-tree binding documentation
  regulator/mfd: Support ROHM BD71847 power management IC
  regulator: da905{2,5}: Remove unnecessary array check
  regulator: qcom: Add PMS405 regulators
  ...
2018-10-23 01:54:44 +01:00
..
include/mach ARM: OMAP1: Get rid of <mach/ams-delta-fiq.h> 2018-07-02 23:05:14 -07:00
ams-delta-fiq-handler.S ARM: OMAP1: Get rid of <mach/ams-delta-fiq.h> 2018-07-02 23:05:14 -07:00
ams-delta-fiq.c Input: ams_delta_serio: Get FIQ buffer from platform_data 2018-07-02 23:05:14 -07:00
ams-delta-fiq.h Input: ams_delta_serio: use IRQ resource 2018-07-02 23:05:14 -07:00
board-ams-delta.c regulator: fixed: Convert to use GPIO descriptor only 2018-09-17 14:32:22 -07:00
board-fsample.c mtd: rawnand: Move platform_nand_xxx definitions out of rawnand.h 2018-10-03 11:12:25 +02:00
board-generic.c ARM: omap1: Switch to use MULTI_IRQ 2015-05-20 09:01:21 -07:00
board-h2-mmc.c mfd: tps65010: Move header file out of I2C realm 2017-08-15 08:27:22 +01:00
board-h2.c mtd: rawnand: Move platform_nand_xxx definitions out of rawnand.h 2018-10-03 11:12:25 +02:00
board-h2.h
board-h3-mmc.c mfd: tps65010: Move header file out of I2C realm 2017-08-15 08:27:22 +01:00
board-h3.c mtd: rawnand: Move platform_nand_xxx definitions out of rawnand.h 2018-10-03 11:12:25 +02:00
board-h3.h
board-htcherald.c ARM: OMAP1: constify gpio_led 2018-07-02 04:09:35 -07:00
board-innovator.c ARM: omap1: add const and initconst to omap_lcd_config 2017-10-02 12:33:15 -07:00
board-nand.c mtd: rawnand: Create a legacy struct and move ->IO_ADDR_{R, W} there 2018-10-03 11:12:25 +02:00
board-nokia770.c ARM: omap1: add const and initconst to omap_lcd_config 2017-10-02 12:33:15 -07:00
board-osk.c ARM: OMAP1: constify gpio_led 2018-07-02 04:09:35 -07:00
board-palmte.c ARM: omap1: add const and initconst to omap_lcd_config 2017-10-02 12:33:15 -07:00
board-palmtt.c ARM: omap1: add const and initconst to omap_lcd_config 2017-10-02 12:33:15 -07:00
board-palmz71.c ARM: omap1: add const and initconst to omap_lcd_config 2017-10-02 12:33:15 -07:00
board-perseus2.c mtd: rawnand: Move platform_nand_xxx definitions out of rawnand.h 2018-10-03 11:12:25 +02:00
board-sx1-mmc.c ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:41:59 -07:00
board-sx1.c ARM: omap1: add const and initconst to omap_lcd_config 2017-10-02 12:33:15 -07:00
board-sx1.h ARM: omap1: make headers more local 2015-12-01 21:52:50 +01:00
camera.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
clock_data.c ARM: OMAP1: fix USB host on 1710 2013-03-13 04:10:57 -06:00
clock.c ARM: OMAP1: clock: Fix debugfs_create_*() usage 2018-02-14 08:35:14 -08:00
clock.h ARM: OMAP: clock: Remove unused mpurate cmdline option 2017-01-24 07:20:02 -08:00
common.h mtd: rawnand: plat_nand: Pass a nand_chip object to all platform_nand_ctrl hooks 2018-10-03 11:12:25 +02:00
devices.c ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:41:59 -07:00
dma.c ARM: OMAP1: DMA: Delete an unnecessary return statement in omap1_show_dma_caps() 2017-06-06 23:54:00 -07:00
fb.c ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:41:59 -07:00
flash.c ARM: omap1: make headers more local 2015-12-01 21:52:50 +01:00
flash.h ARM: omap1: make headers more local 2015-12-01 21:52:50 +01:00
fpga.c genirq: Remove irq argument from irq flow handlers 2015-09-16 15:47:51 +02:00
fpga.h ARM: OMAP: Fix relative includes for fpga.h 2012-10-31 15:37:14 -07:00
gpio7xx.c ARM: OMAP1: Fix randconfig builds if ARCH_OMAP15XX not selected 2015-05-21 14:50:23 -07:00
gpio15xx.c ARM: OMAP1: Fix a bunch of GPIO related section warnings after initdata got corrected 2013-10-18 10:50:51 -07:00
gpio16xx.c ARM: OMAP1: Fix randconfig builds if ARCH_OMAP15XX not selected 2015-05-21 14:50:23 -07:00
i2c.c i2c: omap: move header to platform_data 2018-05-17 16:27:58 +02:00
i2c.h ARM: OMAP: Move plat/i2c.h into mach-omap1 folder 2018-02-14 10:28:13 -08:00
id.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
io.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
iomap.h ARM: OMAP1: Remove relative includes 2012-10-31 15:37:14 -07:00
irq.c ARM: kill off set_irq_flags usage 2015-07-28 13:58:13 +02:00
Kconfig ARM: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource 2018-02-22 10:53:52 -08:00
lcd_dma.c ARM: OMAP1: Remove dma.h 2013-06-18 00:12:34 -07:00
Makefile License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
Makefile.boot
mcbsp.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
mmc.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mux.c ARM: OMAP1: Fix section mismatch warnings for omap_cfg_reg 2015-05-21 14:50:23 -07:00
ocpi.c omap16xx: Removes fixme no longer needed in ocpi_enable() 2014-07-08 01:15:36 -07:00
opp_data.c ARM: OMAP: clock: split plat/clkdev_omap.h into OMAP1/2 files 2012-10-18 16:23:30 -07:00
opp.h
pm_bus.c arm: omap1: remove boilerplate code and use USE_PM_CLK_RUNTIME_OPS 2015-05-12 23:55:38 +02:00
pm.c ARM: OMAP: Move dmtimer.h out of plat-omap 2018-02-22 10:53:06 -08:00
pm.h
reset.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
serial.c ARM: OMAP1: Fix randconfig builds if ARCH_OMAP15XX not selected 2015-05-21 14:50:23 -07:00
sleep.S ARM: OMAP1: Remove relative includes 2012-10-31 15:37:14 -07:00
soc.h ARM: OMAP1: Remove relative includes 2012-10-31 15:37:14 -07:00
sram-init.c ARM: OMAP: Move omap1 specific code to local sram.c 2012-10-31 10:14:14 -07:00
sram.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sram.S
time.c ARM/omap1/time: Migrate to new 'set-state' interface 2015-07-17 08:26:24 +05:30
timer.c ARM: OMAP: Move dmtimer.h out of plat-omap 2018-02-22 10:53:06 -08:00
timer32k.c ARM/omap1/timer32: Migrate to new 'set-state' interface 2015-07-17 08:28:39 +05:30
usb.c ARM: OMAP1: USB: delete redundant CPU class checks 2017-01-05 09:34:18 -08:00