forked from luck/tmp_suning_uos_patched
2795343705
The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJPuexPAAoJEIwa5zzehBx3YBsP/0nFhXjb5t1PdLfFzGKtcZVB j4zXWXMHQ1fA7wIfEpZF3Nnco6MQkufF5wJPoPdn1+wmkzCn3D6IwNVWVtW4U5i9 VGyShSbgusAAYXUe/9yYj8eN+bbRQSvdN4eWYWU6+rRXShGZ5dZZmp+IPNl54dnW 6F8uCnHX0cnIMCpGqV+41zZgZ/4wL2k9gdqu0LO6pi07o4tGd0Z4gcySgUFAnn1R kofNHueYIP4UgOg8DREoBzVKlpRqMou3S2kSZUfMeb3Q9ryF7UIvaGqIILyi7PKL kWd3nptg0EPavfL21SwXHiGpnDpB/Gj/F70kcPLus5RYujB24C9bvBmc26z68NZx Sz9mbElkkIU5duZsl1nxBWJ8IZ/tSWdtmC2xQMznmV7gHyGgVwr4j47f4Uv5sBvM 14JHDO7mqN6E6FnTFZu/oPAN5pDjgL+TVNK5BU6Wkq0zitrA6eyKDqCvBCqkO6Nn tNzOuyRDzMOwM7HzqXhxqtzJWXylO1Mldc4bM8X4Cocf4pnLna/X6uP6dgE6A+JY azVYx4I/0NdEPerDTzIcEhBDgZeBVROhUQr+kHxc4rf6WzUUbu/wEo1UKXWV66oW 1jb1yAFFWqYjkQuQc2PD4JSx35sFJaoSaoneRtmzBzRDfzSr5KjKj1E0e1skyMFq 7ZVLCqZD0cB9DhmMDkWP =rwFF -----END PGP SIGNATURE----- Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc clock driver changes from Olof Johansson: "The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts." Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code removed in one branch, added OF support in another) and drivers/dma/imx-sdma.c (independent changes next to each other). * tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() SPEAr: Update defconfigs SPEAr: Add SMI NOR partition info in dts files SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock SPEAr: Add DT bindings for SPEAr's timer ARM i.MX: remove now unused clock files ARM: i.MX6: implement clocks using common clock framework ARM i.MX35: implement clocks using common clock framework ARM i.MX5: implement clocks using common clock framework ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ...
840 lines
22 KiB
Plaintext
840 lines
22 KiB
Plaintext
config HAVE_IMX_GPC
|
|
bool
|
|
|
|
config HAVE_IMX_MMDC
|
|
bool
|
|
|
|
config HAVE_IMX_SRC
|
|
bool
|
|
|
|
config ARCH_MX1
|
|
bool
|
|
|
|
config MACH_MX21
|
|
bool
|
|
|
|
config ARCH_MX25
|
|
bool
|
|
|
|
config MACH_MX27
|
|
bool
|
|
|
|
config ARCH_MX5
|
|
bool
|
|
|
|
config ARCH_MX50
|
|
bool
|
|
|
|
config ARCH_MX51
|
|
bool
|
|
|
|
config ARCH_MX53
|
|
bool
|
|
|
|
config SOC_IMX1
|
|
bool
|
|
select ARCH_MX1
|
|
select COMMON_CLK
|
|
select CPU_ARM920T
|
|
select IMX_HAVE_IOMUX_V1
|
|
select MXC_AVIC
|
|
|
|
config SOC_IMX21
|
|
bool
|
|
select MACH_MX21
|
|
select CPU_ARM926T
|
|
select COMMON_CLK
|
|
select IMX_HAVE_IOMUX_V1
|
|
select MXC_AVIC
|
|
|
|
config SOC_IMX25
|
|
bool
|
|
select ARCH_MX25
|
|
select COMMON_CLK
|
|
select CPU_ARM926T
|
|
select ARCH_MXC_IOMUX_V3
|
|
select MXC_AVIC
|
|
|
|
config SOC_IMX27
|
|
bool
|
|
select MACH_MX27
|
|
select CPU_ARM926T
|
|
select COMMON_CLK
|
|
select IMX_HAVE_IOMUX_V1
|
|
select MXC_AVIC
|
|
|
|
config SOC_IMX31
|
|
bool
|
|
select CPU_V6
|
|
select IMX_HAVE_PLATFORM_MXC_RNGA
|
|
select MXC_AVIC
|
|
select COMMON_CLK
|
|
select SMP_ON_UP if SMP
|
|
|
|
config SOC_IMX35
|
|
bool
|
|
select CPU_V6
|
|
select ARCH_MXC_IOMUX_V3
|
|
select COMMON_CLK
|
|
select HAVE_EPIT
|
|
select MXC_AVIC
|
|
select SMP_ON_UP if SMP
|
|
|
|
config SOC_IMX5
|
|
select CPU_V7
|
|
select MXC_TZIC
|
|
select COMMON_CLK
|
|
select ARCH_MXC_IOMUX_V3
|
|
select ARCH_HAS_CPUFREQ
|
|
select ARCH_MX5
|
|
bool
|
|
|
|
config SOC_IMX50
|
|
bool
|
|
select SOC_IMX5
|
|
select ARCH_MX50
|
|
|
|
config SOC_IMX51
|
|
bool
|
|
select SOC_IMX5
|
|
select ARCH_MX5
|
|
select ARCH_MX51
|
|
|
|
config SOC_IMX53
|
|
bool
|
|
select SOC_IMX5
|
|
select ARCH_MX5
|
|
select ARCH_MX53
|
|
|
|
if ARCH_IMX_V4_V5
|
|
|
|
comment "MX1 platforms:"
|
|
config MACH_MXLADS
|
|
bool
|
|
|
|
config ARCH_MX1ADS
|
|
bool "MX1ADS platform"
|
|
select MACH_MXLADS
|
|
select SOC_IMX1
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
help
|
|
Say Y here if you are using Motorola MX1ADS/MXLADS boards
|
|
|
|
config MACH_SCB9328
|
|
bool "Synertronixx scb9328"
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
help
|
|
Say Y here if you are using a Synertronixx scb9328 board
|
|
|
|
config MACH_APF9328
|
|
bool "APF9328"
|
|
select SOC_IMX1
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
help
|
|
Say Yes here if you are using the Armadeus APF9328 development board
|
|
|
|
comment "MX21 platforms:"
|
|
|
|
config MACH_MX21ADS
|
|
bool "MX21ADS platform"
|
|
select SOC_IMX21
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
help
|
|
Include support for MX21ADS platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
comment "MX25 platforms:"
|
|
|
|
config MACH_MX25_3DS
|
|
bool "Support MX25PDK (3DS) Platform"
|
|
select SOC_IMX25
|
|
select IMX_HAVE_PLATFORM_FLEXCAN
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMXDI_RTC
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
|
|
config MACH_EUKREA_CPUIMX25SD
|
|
bool "Support Eukrea CPUIMX25 Platform"
|
|
select SOC_IMX25
|
|
select IMX_HAVE_PLATFORM_FLEXCAN
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMXDI_RTC
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select MXC_ULPI if USB_ULPI
|
|
|
|
choice
|
|
prompt "Baseboard"
|
|
depends on MACH_EUKREA_CPUIMX25SD
|
|
default MACH_EUKREA_MBIMXSD25_BASEBOARD
|
|
|
|
config MACH_EUKREA_MBIMXSD25_BASEBOARD
|
|
bool "Eukrea MBIMXSD development board"
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
help
|
|
This adds board specific devices that can be found on Eukrea's
|
|
MBIMXSD evaluation board.
|
|
|
|
endchoice
|
|
|
|
comment "MX27 platforms:"
|
|
|
|
config MACH_MX27ADS
|
|
bool "MX27ADS platform"
|
|
select SOC_IMX27
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
|
help
|
|
Include support for MX27ADS platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_PCM038
|
|
bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
|
|
select SOC_IMX27
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select MXC_ULPI if USB_ULPI
|
|
help
|
|
Include support for phyCORE-i.MX27 (aka pcm038) platform. This
|
|
includes specific configurations for the module and its peripherals.
|
|
|
|
choice
|
|
prompt "Baseboard"
|
|
depends on MACH_PCM038
|
|
default MACH_PCM970_BASEBOARD
|
|
|
|
config MACH_PCM970_BASEBOARD
|
|
bool "PHYTEC PCM970 development board"
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
help
|
|
This adds board specific devices that can be found on Phytec's
|
|
PCM970 evaluation board.
|
|
|
|
endchoice
|
|
|
|
config MACH_CPUIMX27
|
|
bool "Eukrea CPUIMX27 module"
|
|
select SOC_IMX27
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
|
select MXC_ULPI if USB_ULPI
|
|
help
|
|
Include support for Eukrea CPUIMX27 platform. This includes
|
|
specific configurations for the module and its peripherals.
|
|
|
|
config MACH_EUKREA_CPUIMX27_USESDHC2
|
|
bool "CPUIMX27 integrates SDHC2 module"
|
|
depends on MACH_CPUIMX27
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
help
|
|
This adds support for the internal SDHC2 used on CPUIMX27
|
|
for wifi or eMMC.
|
|
|
|
config MACH_EUKREA_CPUIMX27_USEUART4
|
|
bool "CPUIMX27 integrates UART4 module"
|
|
depends on MACH_CPUIMX27
|
|
help
|
|
This adds support for the internal UART4 used on CPUIMX27
|
|
for bluetooth.
|
|
|
|
choice
|
|
prompt "Baseboard"
|
|
depends on MACH_CPUIMX27
|
|
default MACH_EUKREA_MBIMX27_BASEBOARD
|
|
|
|
config MACH_EUKREA_MBIMX27_BASEBOARD
|
|
bool "Eukrea MBIMX27 development board"
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
help
|
|
This adds board specific devices that can be found on Eukrea's
|
|
MBIMX27 evaluation board.
|
|
|
|
endchoice
|
|
|
|
config MACH_MX27_3DS
|
|
bool "MX27PDK platform"
|
|
select SOC_IMX27
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MX2_CAMERA
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select MXC_DEBUG_BOARD
|
|
select MXC_ULPI if USB_ULPI
|
|
help
|
|
Include support for MX27PDK platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_IMX27_VISSTRIM_M10
|
|
bool "Vista Silicon i.MX27 Visstrim_m10"
|
|
select SOC_IMX27
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MX2_CAMERA
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select LEDS_GPIO_REGISTER
|
|
help
|
|
Include support for Visstrim_m10 platform and its different variants.
|
|
This includes specific configurations for the board and its
|
|
peripherals.
|
|
|
|
config MACH_IMX27LITE
|
|
bool "LogicPD MX27 LITEKIT platform"
|
|
select SOC_IMX27
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
help
|
|
Include support for MX27 LITEKIT platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_PCA100
|
|
bool "Phytec phyCARD-s (pca100)"
|
|
select SOC_IMX27
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select MXC_ULPI if USB_ULPI
|
|
help
|
|
Include support for phyCARD-s (aka pca100) platform. This
|
|
includes specific configurations for the module and its peripherals.
|
|
|
|
config MACH_MXT_TD60
|
|
bool "Maxtrack i-MXT TD60"
|
|
select SOC_IMX27
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
help
|
|
Include support for i-MXT (aka td60) platform. This
|
|
includes specific configurations for the module and its peripherals.
|
|
|
|
config MACH_IMX27IPCAM
|
|
bool "IMX27 IPCAM platform"
|
|
select SOC_IMX27
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
help
|
|
Include support for IMX27 IPCAM platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_IMX27_DT
|
|
bool "Support i.MX27 platforms from device tree"
|
|
select SOC_IMX27
|
|
select USE_OF
|
|
help
|
|
Include support for Freescale i.MX27 based platforms
|
|
using the device tree for discovery
|
|
|
|
endif
|
|
|
|
if ARCH_IMX_V6_V7
|
|
|
|
comment "MX31 platforms:"
|
|
|
|
config MACH_MX31ADS
|
|
bool "Support MX31ADS platforms"
|
|
select SOC_IMX31
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
default y
|
|
help
|
|
Include support for MX31ADS platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_MX31ADS_WM1133_EV1
|
|
bool "Support Wolfson Microelectronics 1133-EV1 module"
|
|
depends on MACH_MX31ADS
|
|
depends on MFD_WM8350_I2C
|
|
depends on REGULATOR_WM8350
|
|
select MFD_WM8350_CONFIG_MODE_0
|
|
select MFD_WM8352_CONFIG_MODE_0
|
|
help
|
|
Include support for the Wolfson Microelectronics 1133-EV1 PMU
|
|
and audio module for the MX31ADS platform.
|
|
|
|
config MACH_MX31LILLY
|
|
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
|
|
select SOC_IMX31
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select MXC_ULPI if USB_ULPI
|
|
help
|
|
Include support for mx31 based LILLY1131 modules. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
config MACH_MX31LITE
|
|
bool "Support MX31 LITEKIT (LogicPD)"
|
|
select SOC_IMX31
|
|
select MXC_ULPI if USB_ULPI
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_RTC
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
help
|
|
Include support for MX31 LITEKIT platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_PCM037
|
|
bool "Support Phytec pcm037 (i.MX31) platforms"
|
|
select SOC_IMX31
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
|
select MXC_ULPI if USB_ULPI
|
|
help
|
|
Include support for Phytec pcm037 platform. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
config MACH_PCM037_EET
|
|
bool "Support pcm037 EET board extensions"
|
|
depends on MACH_PCM037
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
help
|
|
Add support for PCM037 EET baseboard extensions. If you are using the
|
|
OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
|
|
command-line parameter.
|
|
|
|
config MACH_MX31_3DS
|
|
bool "Support MX31PDK (3DS)"
|
|
select SOC_IMX31
|
|
select MXC_DEBUG_BOARD
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select MXC_ULPI if USB_ULPI
|
|
help
|
|
Include support for MX31PDK (3DS) platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_MX31_3DS_MXC_NAND_USE_BBT
|
|
bool "Make the MXC NAND driver use the in flash Bad Block Table"
|
|
depends on MACH_MX31_3DS
|
|
depends on MTD_NAND_MXC
|
|
help
|
|
Enable this if you want that the MXC NAND driver uses the in flash
|
|
Bad Block Table to know what blocks are bad instead of scanning the
|
|
entire flash looking for bad block markers.
|
|
|
|
config MACH_MX31MOBOARD
|
|
bool "Support mx31moboard platforms (EPFL Mobots group)"
|
|
select SOC_IMX31
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
select MXC_ULPI if USB_ULPI
|
|
help
|
|
Include support for mx31moboard platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_QONG
|
|
bool "Support Dave/DENX QongEVB-LITE platform"
|
|
select SOC_IMX31
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
help
|
|
Include support for Dave/DENX QongEVB-LITE platform. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
config MACH_ARMADILLO5X0
|
|
bool "Support Atmark Armadillo-500 Development Base Board"
|
|
select SOC_IMX31
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select MXC_ULPI if USB_ULPI
|
|
help
|
|
Include support for Atmark Armadillo-500 platform. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
config MACH_KZM_ARM11_01
|
|
bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
|
|
select SOC_IMX31
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
help
|
|
Include support for KZM-ARM11-01. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_BUG
|
|
bool "Support Buglabs BUGBase platform"
|
|
select SOC_IMX31
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
default y
|
|
help
|
|
Include support for BUGBase 1.3 platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
comment "MX35 platforms:"
|
|
|
|
config MACH_PCM043
|
|
bool "Support Phytec pcm043 (i.MX35) platforms"
|
|
select SOC_IMX35
|
|
select IMX_HAVE_PLATFORM_FLEXCAN
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select MXC_ULPI if USB_ULPI
|
|
help
|
|
Include support for Phytec pcm043 platform. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
config MACH_MX35_3DS
|
|
bool "Support MX35PDK platform"
|
|
select SOC_IMX35
|
|
select MXC_DEBUG_BOARD
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
help
|
|
Include support for MX35PDK platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_EUKREA_CPUIMX35SD
|
|
bool "Support Eukrea CPUIMX35 Platform"
|
|
select SOC_IMX35
|
|
select IMX_HAVE_PLATFORM_FLEXCAN
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select MXC_ULPI if USB_ULPI
|
|
help
|
|
Include support for Eukrea CPUIMX35 platform. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
choice
|
|
prompt "Baseboard"
|
|
depends on MACH_EUKREA_CPUIMX35SD
|
|
default MACH_EUKREA_MBIMXSD35_BASEBOARD
|
|
|
|
config MACH_EUKREA_MBIMXSD35_BASEBOARD
|
|
bool "Eukrea MBIMXSD development board"
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
help
|
|
This adds board specific devices that can be found on Eukrea's
|
|
MBIMXSD evaluation board.
|
|
|
|
endchoice
|
|
|
|
config MACH_VPR200
|
|
bool "Support VPR200 platform"
|
|
select SOC_IMX35
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
help
|
|
Include support for VPR200 platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
comment "i.MX5 platforms:"
|
|
|
|
config MACH_MX50_RDP
|
|
bool "Support MX50 reference design platform"
|
|
depends on BROKEN
|
|
select SOC_IMX50
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
help
|
|
Include support for MX50 reference design platform (RDP) board. This
|
|
includes specific configurations for the board and its peripherals.
|
|
|
|
comment "i.MX51 machines:"
|
|
|
|
config MACH_IMX51_DT
|
|
bool "Support i.MX51 platforms from device tree"
|
|
select SOC_IMX51
|
|
select USE_OF
|
|
select MACH_MX51_BABBAGE
|
|
help
|
|
Include support for Freescale i.MX51 based platforms
|
|
using the device tree for discovery
|
|
|
|
config MACH_MX51_BABBAGE
|
|
bool "Support MX51 BABBAGE platforms"
|
|
select SOC_IMX51
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
help
|
|
Include support for MX51 Babbage platform, also known as MX51EVK in
|
|
u-boot. This includes specific configurations for the board and its
|
|
peripherals.
|
|
|
|
config MACH_MX51_3DS
|
|
bool "Support MX51PDK (3DS)"
|
|
select SOC_IMX51
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select MXC_DEBUG_BOARD
|
|
help
|
|
Include support for MX51PDK (3DS) platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_EUKREA_CPUIMX51SD
|
|
bool "Support Eukrea CPUIMX51SD module"
|
|
select SOC_IMX51
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
help
|
|
Include support for Eukrea CPUIMX51SD platform. This includes
|
|
specific configurations for the module and its peripherals.
|
|
|
|
choice
|
|
prompt "Baseboard"
|
|
depends on MACH_EUKREA_CPUIMX51SD
|
|
default MACH_EUKREA_MBIMXSD51_BASEBOARD
|
|
|
|
config MACH_EUKREA_MBIMXSD51_BASEBOARD
|
|
prompt "Eukrea MBIMXSD development board"
|
|
bool
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
help
|
|
This adds board specific devices that can be found on Eukrea's
|
|
MBIMXSD evaluation board.
|
|
|
|
endchoice
|
|
|
|
config MX51_EFIKA_COMMON
|
|
bool
|
|
select SOC_IMX51
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_PATA_IMX
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select MXC_ULPI if USB_ULPI
|
|
|
|
config MACH_MX51_EFIKAMX
|
|
bool "Support MX51 Genesi Efika MX nettop"
|
|
select LEDS_GPIO_REGISTER
|
|
select MX51_EFIKA_COMMON
|
|
help
|
|
Include support for Genesi Efika MX nettop. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_MX51_EFIKASB
|
|
bool "Support MX51 Genesi Efika Smartbook"
|
|
select LEDS_GPIO_REGISTER
|
|
select MX51_EFIKA_COMMON
|
|
help
|
|
Include support for Genesi Efika Smartbook. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
comment "i.MX53 machines:"
|
|
|
|
config MACH_IMX53_DT
|
|
bool "Support i.MX53 platforms from device tree"
|
|
select SOC_IMX53
|
|
select USE_OF
|
|
select MACH_MX53_ARD
|
|
select MACH_MX53_EVK
|
|
select MACH_MX53_LOCO
|
|
select MACH_MX53_SMD
|
|
help
|
|
Include support for Freescale i.MX53 based platforms
|
|
using the device tree for discovery
|
|
|
|
config MACH_MX53_EVK
|
|
bool "Support MX53 EVK platforms"
|
|
select SOC_IMX53
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
help
|
|
Include support for MX53 EVK platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_MX53_SMD
|
|
bool "Support MX53 SMD platforms"
|
|
select SOC_IMX53
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
help
|
|
Include support for MX53 SMD platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_MX53_LOCO
|
|
bool "Support MX53 LOCO platforms"
|
|
select SOC_IMX53
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select LEDS_GPIO_REGISTER
|
|
help
|
|
Include support for MX53 LOCO platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_MX53_ARD
|
|
bool "Support MX53 ARD platforms"
|
|
select SOC_IMX53
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
help
|
|
Include support for MX53 ARD platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
comment "i.MX6 family:"
|
|
|
|
config SOC_IMX6Q
|
|
bool "i.MX6 Quad support"
|
|
select ARM_CPU_SUSPEND if PM
|
|
select ARM_GIC
|
|
select COMMON_CLK
|
|
select CPU_V7
|
|
select HAVE_ARM_SCU
|
|
select HAVE_IMX_GPC
|
|
select HAVE_IMX_MMDC
|
|
select HAVE_IMX_SRC
|
|
select HAVE_SMP
|
|
select PINCTRL
|
|
select PINCTRL_IMX6Q
|
|
select USE_OF
|
|
|
|
help
|
|
This enables support for Freescale i.MX6 Quad processor.
|
|
|
|
endif
|